Ports required for communication between Web servers and service applications (the default is HTTP)
We're using SharePoint 2010, I'm the system admin for a SharePoint farm. We enabled SharePoint Search by adding a Search Service APplication. One of the crawl report timer job is failing every 5 minte with the error "Cannot connect to remote server".
After digging around, we found that the server running the timer job tries to connect to the SearchAdmin.svc on the index server, over HTTPS / port 32844 However, communication over SSL via a non default port is blocked by our firewall.
According to this article: https://technet.microsoft.com/en-us/library/cc262849.aspx the default is HTTP for communication
between web servers. How is it possible that it's trying to connect over SSL?
Hi,
Quoted from
https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
Publish.
Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
http://www.xylos.com/default.aspx?id=1050
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
Requirements for installing SAP Web As and NWDS IDE?
Hi All,
Please give me details what are the requirments need for installing the SAP Web AS and NWDS IDE in my personal computer .
Thanks
Nageswara.HI Nageswar,
if you want to install developer workplace (NWDS + JAVA WAS)
you need:
RAM: 1 GB required, 2 GB recommended
CPU: 1 GHz required, 2 GHz recommended
Disk Space: 3,3 GB (1,9 GB temporary)
Detail information you can find in
service.sap.com/instguides -> SAP Netweaver -> release 04 ->
installation -> Inst. Guide - SAP NetWeaver Developer Workplace Stack x
Regards
Bogdan -
Java Web Start and IE6 as the default browser on win2k
Hi,
I need to access web pages from my java web start app. These pages are on the save server and the same webapp context as the jsp page to launch the web start app, and are protected.
I have tried with basic auth and servlet filter with cookie to control the access to the web server. When I need to access web server resource from web start app, I create the URL to the page I want to access, set the auth header or cookie and call the web start BasicService to open it in the default browser.
With Netscape 4/7 or Firefox as the default browser, I have no problem to send the auth header or cookie from the web start app to the webserver for security checking and get access to the resource on the server.
But it seems not woking when IE is set to be the default browser. I am always asked for userid/password if I use basic auth; or redirected to the login page if I use servlet filter and cookie.
If anybody knows a solution for this IE dfficulity, could you please share it?
harryHow did you even get k9 on your iPad...it does not show up in my iTunes apps? So I
Had to download it on my computer ...transfer it to my iPad... Now it's in my Dropbox
On the iPad...but I can't figure out how to install it from here......I want a browser on my
iPad that ihas parental controls...I see quite a few should be in the iTunes store..even
Firefox....but not a one show up in my iTunes app store????? -
BODS / SAP : what set-ups are required for communicating with each other ?
Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PMGetting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.
See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2 -
I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?
First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz -
Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks
See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2 -
The software required for communicating with ipod and mobile phones was not installed correctly
ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10 64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Ports required for GG setup (Oracle to Oracle replication )
GG version: 11.2.1.0.1
OS : RHEL 5.4
We are going to configure GoldgenGate which is going to replicate the DMLs for few tables (Uni-directonal) from source to target.
Since there is a firewall between source and target, We need to request the network team to open ports at both source and target servers.
For manager process , we are going to use the default 7809 both at source and Target. What are the other ports that we need to request the network team to open for both servers ?Hi,
If a firewall is being used at an Oracle GoldenGate target location, additional ports are required on the target system to receive dynamic TCP/IP communications from remote
Oracle GoldenGate processes. These ports are:
● One port for each Collector process that is started by the local Manager to receive propagated transaction data from remote online Extract processes. When an Extract
process sends data to a target, the Manager on the target starts a dedicated Collector process.
● One port for each Replicat process that is started by the local Manager as part of a remote task. A remote task is used for initial loads and is specified with the RMTTASK
parameter. This port is used to receive incoming requests from the remote Extract process.
● Some extra ports in case they are needed for expansion of the local Oracle GoldenGate configuration.
● Ports for the other Oracle GoldenGate products if they interact with the local Oracle GoldenGate instance, as stated in the documentation of those products.
To specify these ports, use the DYNAMICPORTLIST parameter in the Manager parameter file.
Follow these guidelines:
● You can specify up to 5000 ports in any combination of the following formats:
7830, 7833, 7835
7830-7835
7830-7835, 7839
● The ports must be unreserved and unrestricted.
● Each Manager instance on a system must use a different port list..
Although not a required parameter, DYNAMICPORTLIST is strongly recommended for best performance. The Collector process is responsible for finding and binding to an available
port, and having a known list of qualified ports speeds this process. In the absence of DYNAMICPORTLIST (or if not enough ports are specified with it), Collector tries to use port 7840 for remote requests. If 7840 is not available, Collector increments by one until it finds an available port. This can delay the acceptance of the remote request. If Collector runs out of ports in the DYNAMICPORTLIST list, the following occurs:
● Manager reports an error in its process report and in the Oracle GoldenGate ggserr log.
● Collector retries based on the rules in the Oracle GoldenGate tcperrs file
For more information about PORT and DYNAMICPORTLIST, see the Oracle GoldenGate Windows and UNIX Reference Guide.
Hopefully this will help you
Annamalai. -
Ports Required to open between Exchange 2010 & 2013
Hi,
I have to introduce Exchange 2013 into Exchange 2010 environment that is in same Organization. There are 3 sites connected on which Exchange 2010 installed and 4 site will be Exchange 2013 and then mailbox will migrate to E2k13 servers.
All 4 sites and connected to MPLS link, please let me know what ports are required to open for Communication between mail flow.
From Internet OWA : 443 & 25 is sufficient for Mail flow.
AmitExchange does not support blocking any ports between individual Exchange Servers as well as Exchange to DC communication, so for internal communication everything has to be opened.
If you are just talking client traffic (OWA, ActiveSync, Outlook Anywhere) and smtp mail traffic from external sources, then you should only need 443 (client traffic) and 25 (smtp traffic).
https://social.technet.microsoft.com/Forums/en-US/bc21b467-76bb-4c86-b7e1-21daa82cc37a/ports-required-for-exchange-2013-installation?forum=exchangesvrdeploy -
Load-balancing and fail-over between web containers and EJB containers
When web components and EJB components are run in different OC4J instances, can we achieve load-balancing and fail-over between web containers and EJB containers?
nullIt looks like there is clustering, but not loadbalancing available for rmi
from the rmi.xml configuration. The application will treat any ejbs on the
cluster as one-to-one look-ups. Orion will go out and get the first ejb
available on the cluster. See the docs on configuring rmi.xml (and also the
note below).
That is a kind-of failover, because if machine A goes down, and the
myotherAejbs.jar are on machine B too, orion will go out and get the bean
from machine B when it can't find machine A. But it doesn't go machine A
then machine B for each remote instance of the bean. You could also specify
the maximum number of instances of a bean, and as one machine gets "loaded",
orion would go to the next available machine...but that's not really
loadbalancing.
That is, you can set up your web-apps with ejbs, but let all of the ejbs be
remote="true" in the orion-application.xml file:
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application
runtime 1.2//EN" "http://www.orionserver.com/dtds/orion-application.dtd">
<orion-application deployment-version="1.5.2">
<ejb-module remote="true" path="myotherAejbs.jar" />
<ejb-module remote="true" path="myotherBejbs.jar" />
<ejb-module remote="true" path="myotherCejbs.jar" />
<web-module id="mysite" path="mysite.war" />
... other stuff ...
</orion-application>In the rmi.xml you would define your clustering:
<cluster host="230.0.0.1" id="123" password="123abc" port="9127"
username="cluster-user" />
Tag that is defined if the application is to be clustered. Used to set up
a local multicast cluster. A username and password used for the servers to
intercommunicate also needs to be specified.
host - The multicast host/ip to transmit and receive cluster data on. The
default is 230.0.0.1.
id - The id (number) of this cluster node to identify itself with in the
cluster. The default is based on local machine IP.
password - The password configured for cluster access. Needs to match that
of the other nodes in the cluster.
port - The port to transmit and receive cluster data on. The default is
9127.
username - The username configured for cluster access. Needs to match that
of the other nodes in the cluster. -
Ports required for Goldengate Setup 7809......
hi,
i am using default port 7809 on my server.we have also firewall. we have just open only one port.i.e 7809 Telnet srev2 7809... connected
but problem in data pump process, can't be establish the Network connection with remote server.
So is there any other ports that should be open on Source & Target server as well.
Regards,
AMSII1.Paste your source and target mgr.prm and data pump paramater files entries.
2. What is the exact error message in report file?
3. Did you open port for source system as well as target systems?
for more details ,
Assigning Manager a port for local communication
The Manager process in each Oracle GoldenGate installation requires a dedicated port for communication between itself and other local Oracle GoldenGate processes. To specify this
port, use the PORT parameter in the Manager parameter file. Follow these guidelines:
1. The default port number for Manager is 7809. You must specify either the default port number (recommended, if available) or a different one of your choice.
2. The port must be unreserved and unrestricted.
3. Each Manager instance on a system must use a different port number.
Use the DYNAMICPORTLIST parameter to specify a list of available ports to which the following,
local Oracle GoldenGate processes can bind for communication with a remote Oracle GoldenGate process:
● Collector: to communicate with a remote Extract to receive incoming data.
● Replicat: to communicate with a remote Extract to receive data during an initial load task.
● Passive Extract: to communicate with a remote Collector
● GGSCI: to issue remote commands
Hopefully this will help you
Annamalai.
Maybe you are looking for
-
I used to open the link" http://supportdocs.sonybiz.net/indexes/pi%5CLFS%5CMay_2004%5C00035186.pdf" in firefox earlier. Now I use version 5.0. Recently I noticed that such links in pdf are not opening with firefox and getting an error that "The syste
-
MAKING A FIELD MANDATORY IN SELECTION SCREEN
HOW TO MAKE THE SELECTION SCREEN FIELDS MANDATORY USING LOOP AT SCREEN STATEMENT.I TRIED USING IT WITH AT SELECTION SCREEN EVENT.BUT IT WAS NOT WORKING.SO CAN ANY OF U PROVIDE SAMPLE CODE FOR THIS. THANKS.
-
How to extract full 20 bytes messageDigest from authenticated attributes
I�m having problems with message digest calculation. Why in authenticated attributes the message digest field shows only the first 5 octets? messageDigest = OCTET STRING = 20 bytes: E3:8A:22:3D:7C... How I can extract the whole 20 bytes of message di
-
Hi ALL I have created a new MDM role for Combined Basis & security purpose, The role works fine when tested for creating users & roles & some basis activities. It has full access to basis activities & readonly access to other activities outside of ba
-
Display randomly turns off; will applecare cover?
Hi all, quick question. I've had my iBook G4 for two years now. I love it. However, it does this weird thing every once in a while where the backlight just shuts off. It usually does it if I pick up the computer in order to move it somewhere, if I bu