Position control and organizations

Hi,
I would like to ask about the meaning of (position control) and (Top node position control enabled), which is in the path:
(Oracle project costing> Setup> Resources and organizations> HR foundation> Work structures> Organizations> Hierarchy)
And regarding the screen with the path: (Oracle project costing> Setup> Resources and organizations> HR foundation> Work structures>Organizations> Description)
Does the sysadmin enter the organization name or it is retrieved from the HR????
Thank you very much
Tasneem Ghnaimat

Hi
Position Control and Position Hierarchy have no meaning in the standard functionality and processes of Oracle Projects.
I assume Position Hierarchy may be used when customizing some of the Approval Processes Workflows.
For example a person is assigned in a position of project manager, and another person is assigned in the position of Engineering department manager. In the position hierarchy the various project managers are set up as reporting to that manager.
Now in Oracle Projects you could setup a workflow for approving a project and for approving the budgets. That workflow could send the approval request from the project manager to the higher level on thta hierarchy, to the Engineering Department Manager.
Dina

Similar Messages

Stepper Motor with Linear Stage (Position Control and Data Acquisition)

Hey All,
So.. I've attached a stepper motor to a linear stage and so far it's working pretty well. Using a stepper motor driver from Pololu, I've simplified the control of the motor by just using output pulses from the counter output of a PXI-6143. I've tested the motor using the Pulse Train examples in LabVIEW and all is working well.
My goal now is to allow the user to collect data from a pressure sensor, attached to the linear stage, every X number of steps. From what I can tell so far, and please correct me if I'm wrong, the motor step movement is synchronised with the pulse train input. That is to say, if I give the motor a 200 step pulse train, the pulse train ouput is completed at the exact time the motor has moved 200 steps. From this, I've created a VI that moves the motor X steps, aquires the data point, and then repeats this process for the required amount of data points. The problem with this is that the motor movement is not continuous; it stops for a split second to take the data point.
How can I have labview ouput a pulse train of say 1000 steps and record a data point every 50 steps?
Two ideas that came to mind were:
1. Use the counter input port on the card to count the pulses being sent to the motor.
2. Use an encoder connected to the motor shaft.
I wanted to stay away from theses ideas though since they require resources from the DAQ card.
Thanks,
Ryan

Hi Ryan,
Just to cover all the bases, what version of LabVIEW are you using and can you attach your VI? Initially your ideas sound like they should work, do you expect to be nearly maxing out the DAQ?
Thank you,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

Controlling of organizational units in approp request with position id data

Dear Experts,
I am using Investment Management for PS.
I have created Investment management program and position ids, in Position ID master data, I ahve mentioned the Co area, Company Code, Plant and Business Area.
Then creating an Appropriation request using IMA11 code, in control data tab, I mention the Investment program with position ID and Organizational data tab, I am mentioning the requesting cost center and Plant, system automatically populates the other fields in that tab.
Here I want to have a check of the plant and business area of the appropriation request with that of the Investment Program position ID.
Say the plant in position id is 1000, and plant in appropriation request is 1100, system allows to save the appropriation request.
I want to stop it. Also, can system check the budget of the position id while saving the appropriation request, currently system doesnt check the budget also, while saving the approp request.
I have searched for user exits and BADIs, but could not find out the appropriate one.
Can some one help me out in solving this issue.
Regards
Praveen

Hi Ahmed,
Thanks for your reply.
Have you ever worked with this BADI??
I have gone through the documentation of the BADI and it seems to be okay.
I need to check with my ABAPer as well.
I'll get back on this once I implement the same.
Regards,
Praveen

Position Control - HR or Finance?

It is believed that HR should manages the org structure and control the increases/decreases in positions. Since Finance is managing the Budgets how do the increases, decreases or movement of positions monitored and reflected in the financial budgets? Does Finance approve the changes to the number of position? or does Finance get a report to monitor the budget of positions? If yes, which would be the best report so that Finance can get the information they need to monitor position budgets?
I just like to know how other international organizations manage their org structure and position control and the Finance department's involvement in controlling the budgets. If available kindly send me links to documents or white papers on the subject.
Thanks for your help.

as you said
HR shd manage the Organisational structure
and Finance Budgets right
The finance people can know Cost incurred for all the employees
based on the PERSONAL NUMBERs and the results will posted to fico and u will get thru Cost Center and that is assigned to GL account
here the Personal number is assigned to the Position and cost Center is assigned to Position or Personal Number
so when u hire an employee he shd occupy certain postion and that position shd assigned to Cost Center
and Cost Center will gives the details of the Balances and Expenses Right
>here there might be a question wht in case for Vaccant Positions as there are not used these position will not come into the PICture unless they are assigned to the person
so the control shd be with in the HR as some times the Person may move form one orgunit to another orgunit at that time
the cost center will get differs right ??? and the first person who gets intimation towards tranfer of the employees is the HR

Position Hierarchy Vs Organization Hierarchy

Hi
Our organization is position driven organization. I want to know what are the main advantages and disadvantages for Position Hierarchy and Organization Hierarchy.
Because on top the hierarchies we will create security profiles.
Can I have any document where I can find the comparison between both of these hierarchies.
Thanks
Gaurav

No, the supervisor hierarchy is constructed simply by specifying supervisors on assignments.
Added complexity can be added to the supervisor hierarchy in a multi assignment environment; you can then specify a 'supevisory assignment' as well but that is rare.
It sounds like you will be invariable be drawn into using Positions. Having a 1-1 relationship between positions and employees is not unusual but be warned it can be extremely time consuming to maintain. I have been to organizations where position maintenance is virtually a full time job for a member of staff.
If you are using Appraisals, definitely make use of the supervisor hierarchy, it is hard enough to implement correctly as it is without making it harder and trying to use the position hierarchy.
You should be able to use the supervisor hierarchy for the OTL and iRec approval processes too but I'm happy to defer to other experts on the forum for those.

Position Control of compumotor linear servo table and GV-U6E with PCI-7344

I'm referring PCI-7344 (not 7334).
I have the GV-U6E which is a drive only and does not possess control functionality. the drive only version does not store or use programs. So, serial commands can not be sent through COM port by LabVIEW even though A few basic commands can be emulated.
I am trying to do position control as I mentioned. For example, the motor should move A point to B point exactly with a certain speed. The points must be aboulte position.
I would like you to see the reference comment that I have been contacting with in your website forum.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000DD490000&USEARCHCONTEXT_CATEGORY_0=_14_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_14_&UCATEGORY_S=0
Regard,
Jin Ho Lee
----- Original Message -----
From:
To:
Sent: Thursday, September 26, 2002 5:00 PM
Subject: Re: (Reference#1549-QYW196) "Position Control of linear servo table and GV-U6E with PCI-7344
>
> Note: Your reference number is included in the Subject field of this
> message. It is very important that you do not remove or modify this
> reference number, or your message may be returned to you.
>
>
> JinHo. Compumotor is a very popular brand, and I know of several customers
> who integrate our 7334 with Computmotor drives. However, when you say that
> the MAX configuration doesn't fit in the compumotor drive settings, are you
> referring to the specs from the 7344? It looks like the 7344 and the
> Compumotor will work well together through a UMI break out box. If you're
> referring to specific commands that the Compumotor receives, I'd have to
> know more about the protocol. If the Compumotor needs serial commands,
> then you can send them through the computer's COM port from LabVIEW.
> Please let me know exactly what kind of configurations you're trying to
> set. The 7344 can be completely configured in MAX and LabVIEW.
>
>
> Best Regards
>
> Kyle Voosen
> Applications Engineer
> National Instruments
> http://www.ni.com/support
>
> ------------------------------------------------------------------------------
>
> Problem Description :
> "Position Control of compumotor 406LXR linear servo table and GV-U6E(motor
> drive) with PCI-7344"
>
> "Since I had the answers referring:
> http://exchange.ni.com/servlet/ ProcessRequest?RHIVEID=101&RPAGEID=135&
> HOID=506500000008000000DD490000& USEARCHCONTEXT_CATEGORY_0=_14_&
> USEARCHCONTEXT_CATEGORY_S=0& UCATEGORY_0=_14_&UCATEGORY_S=0
>
> Wiring step was done well. However, I still have a problem that MAX
> configuration doesn't fit in compumotor drive settings. Therefore, the
> setup is shown below, and I want to know how I can set up PCI-7344
> configuration in MAX or LabVIEW VI.
>
>
> -----------------------------------------------------
>
> Uploaded from device address 0
>
> Gemini GV Servo Drive Setup
>
>
>
> Motor Setup
> DMTR 1703
> Motor ID (406-x-LXR-M-x-D13-x-x-x-x-E5-x-x-x)
> DMTIC 2.48
> Continuous Current (Amps-RMS)
> DMTICD 0.00
> Continuous Current Derating (% derating at rated speed)
> DMTKE 17.6
> Motor Ke (Volts (0-to-peak)/krpm)
> DMTRES 10.10
> Motor Winding Resistance (Ohm)
> DMTJ 119.300
> Motor Rotor Inertia (kg*m*m*10e-6)
> DPOLE 1
> Number of Motor Pole Pairs
> DMTW 40.5
> Motor Rated Speed (rev/sec)
> DMTIP 7.40
> Peak Current (Amps-RMS)
> DMTLMN 3.4
> Minimum Motor Inductance (mH)
> DMTLMX 3.4
> Maximum Motor Inductance (mH)
> DMTD 0.000000
> Motor Damping (Nm/rad/sec)
> DMTRWC 0.23
> Motor Thermal Resistance (degrees Celsius/Watt)
> DMTTCM 20.0
> Motor Thermal Time Constant (minutes)
> DMTTCW 0.33
> Motor Winding Time Constant (minutes)
> DMTAMB 40.00
> Motor Ambient Temperature (degrees Celsius)
> DMTMAX 90.00
> Maximum Motor Winding Temperature (degrees Celsius)
> DHALL 1
> Disable Hall Sensor Checking
> DMTLQS 0
> Set Q Axis Inductance Saturation
> DMTLDS 0
> Set D Axis Inductance Saturation
> DTHERM 0
> Disable motor thermal switch input
>
>
>
> Drive Setup
> DMODE 2
> Drive Control Mode
> DRES 8400
> Drive Resolution (counts/rev)
> DPWM 16
> Drive PWM Frequency (kHz)
> SFB 1
> Encoder Feedback
> ERES 8400
> Encoder Resolution (counts/rev)
> ORES 8400
> Encoder Output Resolution (counts/rev)
> DMEPIT 42.00
> Electrical Pitch (mm)
> SHALL 0
> Invert Hall Sensors
> DMTLIM 1.5
> Torque Limit (Nm)
> DMTSCL 1.5
> Torque Scaling (Nm)
> DMVLIM 119.000000
> Velocity Limit (rev/sec)
> DMVSCL 119.000000
> Velocity Scaling (rev/sec)
>
>
>
> Load Setup
> LJRAT 0.0
> Load-to-Rotor Inertia Ratio
> LDAMP 0.0000
> Load Damping (Nm/rad/sec)
>
>
>
> Fault Setup
> FLTSTP 1
> Fault on Startup Indexer Pulses Enable
> FLTDSB 1
> Fault on Drive Disable Enable
> SMPER 8400
> Maximum Allowable Position Error (counts)
> SMVER 0.000000
> Maximum Allowable Velocity Error (rev/sec)
> DIFOLD 0
> Current Foldback Enable
>
>
>
> Digital Input Setup
> INLVL 11000000
> Input Active Level
> INDEB 50
> Input Debounce Time (milliseconds)
> INUFD 0
> Input User Fault Delay Time (milliseconds)
> LH 0
> Hardware EOT Limits Enable
>
>
>
> Digital Output Setup
> OUTBD 0
> Output Brake Delay Time (milliseconds)
> OUTLVL 0100000
> Output Active Level
>
>
>
> Analog Monitor Setup
> DMONAV 0
> Analog Monitor A Variable
> DMONAS 100
> Analog Monitor A Scaling (% of full scale output)
> DMONBV 0
> Analog Monitor B Variable
> DMONBS 100
> Analog Monitor B Scaling (% of full scale ouput)
>
>
>
> Servo Tuning
> DIBW 1500
> Current Loop Bandwidth (Hz)
> DVBW 100
> Velocity Loop Bandwidth (Hz)
> DPBW 40.00
> Position Loop Bandwidth (Hz)
> SGPSIG 1.000
> Velocity/Position Bandwidth Ratio
> SGIRAT 1.000
> Current Damping Ratio
> SGVRAT 1.000
> Velocity Damping Ratio
> SGPRAT 1.000
> Position Damping Ratio
> DNOTAF 0
> Notch Filter A Frequency (Hz)
> DNOTAQ 1.0
> Notch Filter A Quality Factor
> DNOTAD 0.0000
> Notch Filter A Depth
> DNOTBF 0
> Notch Filter B Frequency (Hz)
> DNOTBQ 1.0
> Notch Filter B Quality Factor
> DNOTBD 0.0000
> Notch Filter B Depth
> DNOTLG 0
> Notch Lag Filter Break Frequency (Hz)
> DNOTLD 0
> Notch Lead Filter Break Frequency (Hz)
> SGINTE 1
> Integrator Option
> SGVF 0
> Velocity Feedforward Gain (%)
> SGAF 0
> Acceleration Feedforward Gain (%)
> -----------------------------------------------------
>
>
> Regards,
> JinHo"
> NI Software :
> LabVIEW version 6.0
> NI Hardware :
> Motion Control device PCI-7344
> Driver Version :
> no
> OS :
> Windows 2000
> CPU :
> Pentium
> RAM :
> 128
> Vendor :
> DELL
> Customer Information :
> Jin Ho Lee
> North Carolina State Univ.
> US
> [email protected]
> Ph: (
> 919
> )
> 512-9929
>
>

Yes, we used an NI PXI-7344 motion control card with an NI UMI-7764 box connected to a Gemini GV-U12E servo drive. (which is a drive only.)
We did positional control in absolute position mode.
I can send you an AutoCAD schematic detailing how to connect the UMI-7764 to the Gemini GV servo drive.
In regard to the Rs232 interface to the GV servo drive,
the GV drive only model is "configurable" not "programmable". You can create unique GV configuration files with Compumotor's Motion planner then download the configuration via Rs232 using LabVIEW as desired. Or, using LabVIEW via Rs232 you can change individual GV drive parameters on demand,
or use the GV's two analog outputs back to LabVIEW's analog inputs to measure commanded motor current or torque, etc.etc.etc

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

Position Budgeting and Control

Dear Friends,
Can antyone please tell me what is he function of and purpose of node "Position Budgeting and Control".
i have searched alot about it and all I come to know about it is this that it is soe how realted with PCP and Payroll simulation but I am not getting any sense out of it .
i mean why to use it. on using it what advantages could be attained in Personnel Cost Planning and Simulation and as well as for Enterprise Compensation Management.
Currently we are implementing PCP and ECM so wanted to know if position budgeting and control woudl have any realtion with it. its importance while implementing PCP and ECM. and suppose f we dont implement this node that what we are loosing.
your help and support would be highly appreciated.
Regards

Hi, I have lots of written information about Position Budgeting and Control, one of them a nice white paper mhich may give you an understanding of the principles. We evaluated it at a customer and decided "only" to implement PCP. As I understood PBC uses PCP as a motor for collecting plan data, but you will not be able to do detail planning f.ex, as in Personnel cost planning. So as I understood it is amongst others a way of collecting HR financial data from a data basis and integrate it with Financial, a bridge between HR and FI. The commitment processor is the engine for this integration, if I've understood it correct. I can't say that I fully understood the principles either, but if you like I may provide you with some documentation. Do not know how to reach you, though. I also have a comment from a PBC-expert, maybe this will enlighten you (FYI: this is taken out of a context):
"...PBC is not intended to do detailed budgeting. PBC main feature is the possibility to create commitments / encumbrances and reserve this budget based on salary expenses. Customers usually spend a big part of their budget in salaries, so this tool offers them the chance to monitor and control this effectively by reserving the budget they will need for a certain period of time (usually the fiscal year) and being able to monitor if there are budget deficiencies in case of salary adjustments or new hires. PBC only uses the budget from FM to post agains it, but in no way pretends to offer a tool to manipulate this budget, plan or make decisions against the whole budget..."
Regards

Position budgeting and control module

Hi Expert,
I need configuration steps for the Position budgeting and control module.
I have search a lot but i didn't get it.
If any have work on this module, please share some documents with me or give me idea how i will do it.
Many thanks
Urvashi Chaudhari

Hi, I have lots of written information about Position Budgeting and Control, one of them a nice white paper mhich may give you an understanding of the principles. We evaluated it at a customer and decided "only" to implement PCP. As I understood PBC uses PCP as a motor for collecting plan data, but you will not be able to do detail planning f.ex, as in Personnel cost planning. So as I understood it is amongst others a way of collecting HR financial data from a data basis and integrate it with Financial, a bridge between HR and FI. The commitment processor is the engine for this integration, if I've understood it correct. I can't say that I fully understood the principles either, but if you like I may provide you with some documentation. Do not know how to reach you, though. I also have a comment from a PBC-expert, maybe this will enlighten you (FYI: this is taken out of a context):
"...PBC is not intended to do detailed budgeting. PBC main feature is the possibility to create commitments / encumbrances and reserve this budget based on salary expenses. Customers usually spend a big part of their budget in salaries, so this tool offers them the chance to monitor and control this effectively by reserving the budget they will need for a certain period of time (usually the fiscal year) and being able to monitor if there are budget deficiencies in case of salary adjustments or new hires. PBC only uses the budget from FM to post agains it, but in no way pretends to offer a tool to manipulate this budget, plan or make decisions against the whole budget..."
Regards

Photoshop CS5 - Control and navigate the cursor position automatically

Hello
I wonder if it’s possible with Photoshop CS5 (OS: Win7) to control and navigate the cursor position automatically?
Given: I have individual image coordinates for a set of locations.
Wanted: A possibility to position the cursor sequentially at those image location by the means of an external script or procedure.
Any ideas if that is possible with CS5?
Thanks for any help.
Lars

As far as I can tell with regard to a Photoshop Scripting approach: No.
Creating a Selection of certain dimensions and a certain position would be possible, though.
What exactly are you trying to achieve?

Controlling position of + and – when adding text size controls

Dear gurus,
I am trying to sort my text size controls (+ and –) and
have managed to get them to resize but I can't get them to sit
together. At the moment, visually it says
Resize text then there is a big gap and there's the minus
(–) then the plus (+) is pushed over onto the next line. I've
tried my best but I simply don't have the knowledge to fix the
problem.
I have attached the code, see below (it may be full of
mistakes so, don't laugh).
Can you help and have I given you enough info?
Thanks,
Mark

@dkg62 – to make clear what's going on, select the text frame and show us another screenshot.
There are at least four cases where you can get a text like that. All cases imply, that the font you'd like to use is missing. I simulated this by formatting text with a font weight that is not available by a character style.
1. The most likely case: There is baseline shift applied; here in my case 9pt.
All other cases are academical, because the pink highlighting is aligned with the text:
2. Text frame options, baseline set to a fixed value (zero in this case)
3. Text on path and the text frame options (baseline) is just the standard default. You can see a second #-end of story sign inside the text frame.
4. Text on path and the text frame options (baseline) is set to fixed (zero in this case). The second #-sign inside the text frame is shifted above because of the fixed value of the baseline option of the text frame options. And obscured by the pink highlighting.
Uwe

Position Control Budgetting

To use the Position control budgeting do we need separate HR Public Sector licensing.
Please advice

Use the Position Transaction window to define and maintain position definitions for organizations that you have selected as position-control organizations.
In the menu "Workstructures : Positions" you can find the form "Position Transaction".
Positions of position-controlled organizations cannot be maintained in the form "Description" unter menu "Workstructures: Positions".

How do I handle a count overflow while running "end's" rotation drive in position control?

Hi everyone!
We run a direct drive in position control mode and normally do oscillating movements i.e. +-10°. The Signal we get is a TTL with 120 counts/°. And with those counts we do our control.
But now we want to run the motor permanent one direction for some days (or 4 ever :-). That means that we get sooner or later a overflow on the count variable. So I think we have a problem when the setpoint is on Overflow -32767 and the Position is 32767. ( I know that I can increase the Integer Value but that does not solve it at the end :-)
How can I handle that?
Is there any programmatic approach?
Thanks for Help!

Hi Petric,
I do see the math but that does not help when I have more then one overflow, right?
Well, you have to make sure you NEVER miss such an overflow event. It would be a big problem if you would detect just every second overflow…
I got a big issue when the setpoint is jumping due to overflow! I have to handle that primarly.
Have your control loop work with arbitrary units.
Convert your measurement signal to arbitrary unit with handling overflows in this step.
Convert your control output to output signal handling overflows as well…

NI pci 6251 position control

Hi
Im new to this forum and new to Labview and NI pci 6251 as well ;(
I'm using NI-PCI-6251 (DC Motor ) with Labview to control the position of a DC motor we developed the program that reads the encoder and display the position of the DC motor shaft
but the problem is that the counter 0 (cnt0) always increases whether the disc rotating clockwise or anticlockwise??!! and when the desired position is reached the controller does nothing to stop the motor ?
i don't know what is the problem or why its happening.

Hi,
I am also doing something similar.
The problem is the motor is the DC motor from Quanser. (DCMCT).
I know the encoder channel of the motor is ctr0 and when I test from "Measurement and Automation Explorer" (Labview>>Tools) I can only read the PFI8 channel.
The motor read 4096 pulses per revolution and no reading is available from PFI10. As per Quanser the motor should be about to do position control. I have seen lab tutorials for position control in internet.
I tested both the vi is mentioned above. The "Example" vi reads the motor position in terms of pulses. But when I rotate the motor in the other direction the count increment not decrement.
Also the quadratureencoderMseries vi did not read the angle position when I set the channel values.
I have attached the parameters that I set.
Can any one please check..
Thanks.
Attachments:
encoder issue.JPG ‏357 KB

If you have any possible with in the itemrender have one is label control and onther one is datagrid

Hi Friends,
                If you have any possible with in the itemrender have one is label control and onther one is data grid control.
In my application i was using list control.The list control have item renderer. In my case if i click list control of label name, the corresponding releated data of data grid need to display and list control label also.
<mx:List width="750" id="Lst_userlist" verticalScrollPolicy="off" horizontalScrollPolicy="off" rowCount="20"
labelField="sec_user_first_name+sec_user_last_name" labelFunction="BindUserName" buttonMode="true" itemClick="Click_UserList(event)" >
<mx:itemRenderer>
<fx:Component>
   <mx:VBox horizontalScrollPolicy="off" verticalScrollPolicy="off" >
     <s:Label id="lbl_userhead" name="{data.sec_user_first_name+data.sec_user_last_name}" buttonMode="true" color="#000000"/>
          <mx:DataGrid height="100%" id="membershipGrid" alternatingItemColors="[#DCDCDC,#F8F8FF]" paddingLeft="5" horizontalScrollPolicy="off" color="black"
      horizontalGridLines="false" verticalScrollPolicy="auto" verticalGridLines="false"   rowCount="{membershipArrColl.length}" rowHeight="25"
            borderSkin="{null}" showHeaders="true" borderVisible="false" dataProvider="{membershipArrColl}" width="750" visible="false" includeInLayout="false">
<mx:columns>
<mx:DataGridColumn width="180" headerText="Name" minWidth="150" sortable="true" wordWrap="true" >
   <mx:itemRenderer>
    <fx:Component>
     <mx:HBox horizontalScrollPolicy="off"   >
      <fx:Script>
       <![CDATA[
       override public function set data(value:Object):void{
       super.data = value;
       if(data.home_sec_organization_id==data.sec_organization_id)
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user _favorites_16_hot.gif");
       else
        fileimg.load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user _remove_16_dis.gif");
       lbl_Gridcloumn_name.text=data.sec_user_first_name+" "+data.sec_user_last_name;
       ]]>
      </fx:Script>
      <mx:Image id="fileimg"    buttonMode="true" toolTip="This is the User's Home Organization"/>
      <s:Label id="lbl_Gridcloumn_name" width="200" buttonMode="true" textDecoration="underline" toolTip="User Menu [{data.sec_user_name}]" click="outerDocument.Click_Name(event);"    />
     </mx:HBox>
    </fx:Component>
   </mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn width="120" minWidth="110" headerText="UserName" sortable="true" dataField="sec_user_name" />
<mx:DataGridColumn width="100" minWidth="80" headerText="OrgName" dataField="sec_org_name">
</mx:columns>
</mx:DataGrid>
   </mx:VBox>
</fx:Component>
</mx:itemRenderer>
</mx:List>
Please Any One Help to me...
Thanks,
Magesh R.

Hi Friend,
The list values are display Even if i click perticular data list value ,the corresponind data grid are display in blow line data list...
can u see below sample.
Blue colotr items are List values
Green Color items are Data Grid values... If click Blue color name then only correspond data grid items are display...
Canvass360 01
Canvass360 01
canvass360-01
HR Demo
System Wide Auth Admin UT
Canvass360 01
canvass360-01
HR Demo
System Wide DocStor Admin UT
Andrew Addison
Andrew Addison
AAddison
HR Demo
System Wide Auth Admin UT
Andrew Addison
AAddison
HR Demo
System Wide DocStor Admin UT
System Admin
System Admin
Admin
HR Demo
MyOrg Administrator UT
System Admin
Admin
HR Demo
Regional Manager UT
System Admin
Admin
HR Demo
Site Manager UT
System Admin
Admin
HR Demo
System Wide Auth Admin UT
System Admin
Admin
HR Demo
System Wide DocStor Admin UT
Ben Affleck
Ben Affleck
Ben
HR Demo
Site Manager UT
Jennifer Aniston
Jennifer Aniston
JenniferA
HR Demo
Site Manager UT
Christian Bale
Christian Bale
Christian Bale
HR Demo
Site Manager UT
Brad Burgess
Brad Burgess
BBurgess
HR Demo
System Wide DocStor Admin UT
Sean Connery
Sean Connery
SConnery
HR Demo
Site Manager UT
Harrison Ford
Harrison Ford
HFord
HR Demo
Regional Manager UT
Megan Fox
Megan Fox
MFox
HR Demo
Regional Manager UT
Chuck Gamble
Chuck Gamble
CGamble
HR Demo
MyOrg Administrator UT
Chuck Gamble
CGamble
HR Demo
Regional Manager UT
Chuck Gamble
CGamble
HR Demo
Site Manager UT
Chuck Gamble
CGamble
HR Demo
System Wide Auth Admin UT
Chuck Gamble
CGamble
HR Demo
System Wide DocStor Admin UT
Chuck Gamble
CGamble
HR Demo
OnBoarding UT
Please Any One Help to me.
Thanks,
Magesh R.
Amiee Mann
AMann
HR Demo
Regional Manager UT
Jennifer Smith
JenniferSmith
HR Demo
Site Manager UT
Reese Witherspoon
Reese
HR Demo
Site Manager UT

Position control and organizations

Similar Messages

Maybe you are looking for