Position of parameters of a report using a Logical Database
Hallo all,
Is there any way that I can make the parameters defined by me in a report to appear <b>before</b> the ones defined by the Logical Database it is using ?
I searched but I couldn't find something relevant.
I would like to avoid having to copy and modify the LDB program.
Thanks
Here are a couple of things you can do:
1. Right-click on the subreport and select "Format Subreport...". Turn off the borders on the subreport.
2. Right-click on the subreport and select "Size and Position". Set the X and Y coordinates both to 0. This will place the subreport at the top-left of the section where it's located.
3. In the subreport, suppress ALL of the sections that you're not using.
4. Make the height of the subreport fairly small - it will expand to the size of the data it contains.
5. Put the column labels in the Page Header of the main report, using markers on the ruler to identify the placement of the left side of each column header. Be sure to line the markers up to a specific "tick mark" on the ruler.
6. In the subreport, place markers at the same tick-marks on the rule as you used for the column labels on the main report. Then align the fields in the subreport with the markers.
This should get you close to the format you're looking for. If it's not exact, you can look at the report in Preview and tweak the position of the column labels to match the data in the subreport.
-Dell
Similar Messages
-
IN HR PAYROLL REPORT USING PNP LOGICAL DATABASE
Dear abapers,
when i ab runing HR payroll report usin PNP Logical database there are some error occurs.
INCLUDE DBPNPCOM
IN UNICODE PROGRAMS, THE "-" CHARECTOR CAN NOT APPEAR IN NAME , AS IT DOES HERE IN THE NAME
PNP-SW-FOUND.
INCLUDE DBPNPCOM
IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
PNP-SW-IGNORELOCKEDRECORDS.
INCLUDE DBPNPCOM
IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
PNP-SW-ENQUEUEPERNR.
PLEASE GIVE ME SOLUTIONS .
THANK YOU SIR.Hi, please check, these might be warnings, not errors.
-
Better alternative to header lines, use of logical database, field-symbols
Hello experts,
I am wondering if theres a better and faster alternative than declaring a header line for an itab. are work areas faster?
What is the use of logical database? can you please give me an example on how to use it in reports.
how do I use field-symbols? I am confused on how it works.
P.S. I recently installed SAP netweaver preview abap edition
in my home PC and I am wondering if I could practice BDC, user exits, etc. If so, how?
Again, thanks for all your help since I'm kinda new to ABAP.I always use this...It uses header lines, but at least is smaller -:)
<b>DATA: BEGIN OF MY_TAB TYPE STANDARD TABLE OF BKPF WITH HEADER LINE.</b>
For logical databases, you can check my blog...I always use LDB for HR programs -:)
<a href="/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports:///people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
LDB's provides a lot of information, because they gather it from a lot of different tables...
A Field-Symbols is like a pointer in C++, like an alias for a variable...Here's a small example...
REPORT Z_ATG_DUMMY.
FIELD-SYMBOLS: <F1>, <F2> TYPE I.
DATA: TEXT(20) TYPE C VALUE 'Hello, how are you?',
NUM TYPE I VALUE 5,
BEGIN OF LINE1,
COL1 TYPE F VALUE '1.1e+10',
COL2 TYPE I VALUE '1234',
END OF LINE1,
LINE2 LIKE LINE1.
ASSIGN TEXT TO <F1>.
ASSIGN NUM TO <F2>.
DESCRIBE FIELD <F1> LENGTH <F2>.
TEXT = 'CHAU'.
WRITE: / <F1>, 'has length', NUM.
WRITE: / TEXT, 'has length', NUM.
ASSIGN LINE1 TO <F1>.
ASSIGN LINE2-COL2 TO <F2>.
MOVE <F1> TO LINE2.
ASSIGN 'LINE2-COL2 =' TO <F1>.
I just can't install SAPNWSP...I only got MiniSap...But I got all the development enviorment...Don't know about the User-Exits...Actually I don't think so...Because those "mini" systems doesn't come with any functional module.
Greetings,
Blag. -
How to use a Logical Database in Function Module.
Hi Experts,
I want to use a logical database in a Function Module to fetch data from a standard SAP table into a Internal table for certain filter conditions.
How can I get get this done????
I called LDB_PROCESS FM in my FM, but I could not figure out how to store the extract in my IT table since we cant use GET in FM.
Please provide me a sample code if possible.
Thanks in Advance,
Alex.Hi,
i had an example program like this ,in this i want to get the data using pnp logical database with 5 fields in an interface program.
data: begin of it_final occurs 0,
pernr like pa0002-pernr,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
usrid like pa0105-usrid,
usrid_long like pa0105-usrid_long,
end of it_final.
get pernr.
clear : p0000,p0002,p0105.
rp-provide-from-last p0000 space p_date p_date.
if p0000-stat2 = '3'.
v_pernr = pnppernr-low.
else.
reject.
endif.
*---Get employee pernr, First name ,Last name into final table
rp-provide-from-last p0002 space p_date p_date.
if pnp-sw-found = '1'.
it_final-pernr = p0002-pernr.
it_final-vorna = p0002-vorna.
it_final-nachn = p0002-nachn.
else.
*---Error message if not infotype 0002 maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-EMI '0002'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get SYSTEM USERNAME to final table
rp-provide-from-last p0105 0001 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid = p0105-usrid.
else.
*---Error message if not SYSTEM USERNAME maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-003 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get Email ID to final table
rp-provide-from-last p0105 0010 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid_long = p0105-usrid_long.
else.
*---Error message if not Email ID maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-004 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
append it_final.
clear it_final.
reward points if useful,
venkat. -
How to use OWN logical database
Hi all,
hope somebody can help me.
I copied a standard logical database (FPMF). The program which I use and have modified is also copied from standard.
How can I assure that the program use MY logical database instead of the SAP-One?
In my case I have some get statements. And these get statements all refer to FPMF and not to my copied database.
Do anybody what's the probelm?
Cheers
PhilipYes, I know. And I am not happy with this solution.
But I didn't see another way for my issue.
Thank you very much.
Philip -
Generic Extractor built on an infoset which uses a logical database
Is anyone aware of any performance issues when building an infoset generic extractor which uses a logical database as the source? Also would anyone also be aware the process of collecting data for extraction? Thanks
Hi Arun,
Thanks for this - I have been informed that there are issues with a small subset of data and I just wanted to get an idea if the steps that would be carried out be the same if the generic extractor is built on table joins or logical data base or does the latter actual carry out say some pre processing steps -
How to make use of logical database in reports?
hi,
I am working on a Cash Flow Forecast report, which requires the usage of 'PSJ' Logical Database for the selection screen with Profit Center(PRCTR) as one field and the other field being Period ( in MM/YYYY format).
I have not worked on Logical Database before. Since, its for the first time I am working on LDB, I require help on it.
How to proceed for this, can someone help me with it?
On receiving further inputs, I will proceed and might come up with some more queries.
Regards,
RaviHi Hari,
Thanks a lot for being so patient. yeah, I will just send you a code snippet of mine. My code is of 3000 Lines. Hence, I will send few parts of it. Just go through and let me know if you need any further information from my side.
Here is the snippet:
*& TABLES
TABLES: PROJ, "Project definition.
PRPS, "WBS Element Master Data
COSP, "CO: External Table.
COFP, "CO: External Table.
SETLEAF, "Value in sets.
FAGLFLEXT, "Profit Center.
S031, "Statistics: Movements for Current Stocks.
SETHEADERT, "short Description of Sets.
AFVC, "Operation within an Order.
AUFK, "Order master data.
PRHI, "Work Breakdown Structure.
AFKO, "Order header data PP orders.
NRIV, "Number range Intervals.
SKB1, "G/L Account Master (company code).
FMCI. "Commitments Item master data.
Type Pool
TYPE-POOLS: SLIS.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
<DYN_WA>,
<DYN_FIELD>.
DATA: COUNT TYPE I,
D_PERIOL LIKE COFP-PERIO,
D_PERIOH LIKE COFP-PERIO,
D_GJAHRL LIKE COFP-GJAHR,
D_GJAHRH LIKE COFP-GJAHR,
D_GJAHR LIKE COFP-GJAHR,
D_PERIO LIKE COFP-PERIO,
OBJNR LIKE COSP-OBJNR,
PKOKR LIKE PRPS-PKOKR,
G_NRLEVEL LIKE NRIV-NRLEVEL,
G_BELNR LIKE COFP-BELNR,
I_OBJ-OBJNR LIKE COFP-OBJNR,
G_OPNGBAL LIKE FAGLFLEXT-HSL01,
G_PAYROLL LIKE COSP-WKG001,
G_PYROL_TAX LIKE COFP-WKGBTR,
G_PENSION LIKE COFP-WKGBTR,
G_BTLDGR LIKE COFP-WKGBTR,
G_REIMPYMT LIKE COFP-WKGBTR,
G_INTCORCPT LIKE COFP-WKGBTR,
G_CAPEXP LIKE COFP-WKGBTR,
G_SLSLDGR LIKE COFP-WKGBTR,
G_REIMRCPT LIKE COFP-WKGBTR,
G_TOTPYMNTS LIKE COFP-WKGBTR VALUE 0,
G_TOTRECPTS LIKE COFP-WKGBTR VALUE 0,
G_MVMTFRMNTH LIKE COFP-WKGBTR VALUE 0,
G_CLSGBAL LIKE COFP-WKGBTR VALUE 0.
DATA: LYEAR(4) TYPE N,
LMONTH1(2) TYPE N,
MON1(2) TYPE N.
DATA: HYEAR(4) TYPE N.
DATA: LMONTH(2) TYPE N.
DATA: HMONTH(2) TYPE N.
DATA: TOTAL(10) TYPE N.
DATA: SUM(10) TYPE N.
DATA: G_PSPID LIKE PROJ-PSPID.
DATA: TOTAL1 LIKE COFP-WKGBTR,
TOTAL2 LIKE COFP-WKGBTR.
DATA: G_KOKRS LIKE COFP-KOKRS,
G_FIPOS LIKE SKB1-FIPOS,
G_POSIT LIKE COFP-POSIT,
G_BUKRS LIKE COFP-BUKRS.
DATA: L_RACCT LIKE FAGLFLEXT-RACCT VALUE '0000220000',
H_RACCT LIKE FAGLFLEXT-RACCT VALUE '0000227999'.
DATA: I TYPE I VALUE '74'.
DATA: P TYPE I VALUE '62'.
*& SELECT-OPTIONS
PARAMETERS : S_PRCTR LIKE PROJ-PRCTR. "Profit Center
SELECT-OPTIONS: SL_SPMON FOR S031-SPMON OBLIGATORY. "Period
*INITIALIZATION
INITIALIZATION.
SL_SPMON-SIGN = C_IN.
SL_SPMON-OPTION = C_BT.
SL_SPMON-LOW = SL_SPMON.
SL_SPMON-HIGH = SL_SPMON.
APPEND SL_SPMON.
AT SELECTION-SCREEN
Event which occurs each time the user hits enter on the selection
Screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SL_SPMON-LOW.
PERFORM MONAT_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SL_SPMON-HIGH.
PERFORM MONAT_F4.
SELECT SINGLE * FROM PROJ WHERE PRCTR = S_PRCTR.
IF SY-SUBRC <> 0 AND NOT ( S_PRCTR IS INITIAL ).
MESSAGE E019.
ENDIF.
ALL WBS ELEMENT SELECTION
SELECT PSPID INTO TABLE I_PROJTAB FROM PROJ WHERE PRCTR = S_PRCTR.
IF SY-SUBRC = 0.
LOOP AT I_PROJTAB.
CALL FUNCTION 'GET_TREE_FROM_PRHI'
EXPORTING
I_POSID = I_PROJTAB-PSPID
I_PSPNR = 00000000
NO_BUFFER = ' '
TABLES
PSP_TREE = I_PRHI
EXCEPTIONS
INPUT_ERROR = 1
PSP_HIERARCHY_ERROR = 2
PSP_NOT_FOUND = 3
OTHERS = 4
ENDLOOP. " PROJTAB
ENDIF.
SELECT * FROM PRPS INTO TABLE I_PRPSVC FOR ALL ENTRIES IN I_PRHI
WHERE PSPNR = I_PRHI-POSNR.
SELECT * FROM AFVC INTO TABLE I_AFVC FOR ALL ENTRIES IN I_PRPSVC
WHERE PROJN = I_PRPSVC-PSPNR.
SELECT * FROM AUFK INTO TABLE I_AUFK FOR ALL ENTRIES IN I_PRPSVC
WHERE PSPEL = I_PRPSVC-PSPNR AND AUTYP NE C_TWENTY.
SELECT OBJNR FROM PRPS INTO TABLE I_OBJ FOR ALL ENTRIES IN I_PRHI
WHERE PSPNR = I_PRHI-POSNR.
IF SY-SUBRC <> 0.
MESSAGE E010.
ENDIF.
I hope that's of some use.
Thanks & Regards,
Ravi -
Using PNP logical database in report
Hi i'm using the PNP logical database in my report, and i want to hide all fields in the 'Period' frame.
is there any way to do it automatically or is it necessary to hide them one by one??
Thanks in advance.If you can put them all in the same screen group, you may be able to do this. But you might run into problems when you re-generate.
Rob -
Web Analysis Reports using a Relational Database
I would like to create a Web Analysis report using data from an Oracle database. From Web Analysis, I try to create a new database connection. I select Oracle as the Driver type. In the Database Connection String field, I replace {HOST-NAME} with the Host information from the TNSNAMES.ORA file. I've confirmed the Port number is correct. When I test the connection, it fails. What am I missing? The format of the Database Connection String that is defaulting into the field is:
jdbc:oracle:thin:@{HOST-NAME}:1521:ORCL
Is there anything else I need to include besides the Host name and Port number, for example, do I need to include the SID?
Thanks.
Terri T.The ojdbc14.jar currently exists in the following directories:
bea\weblogic81\server\lib
oracle\product\10.2.0\client_1
bea\weblogic81\server\ext\jdbc\oracle\920
There is a ojdbc14_g.jar that exists in:
bea\weblogic81\server\ext\jdbc\oracle\10g
bea\weblogic81\server\ext\jdbc\oracle\920
The classes12.jar file exists in:
oracle\product\10.2.0\client_1\oui\jlib
So from your response, I assume I need to copy classes12.jar to a directory under bea\weblogic81?
Thanks.
Terri T. -
How MSS Report passes values to R/3 report using PNP logical db
Heloo Gurus,
I am having some trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.Anyone ?
plz update. -
How to use a logical database's selection screen elements
Hi all,
I have used the logical db, pnp, in my report, however when I want to select data about a personel , ie. her name surname plans-positions, how will I join the two tables pa0001 and logical db? and the table t528t - text for plans?
Thanks.Hi Deniz,
First of all give Logical database PNP in program attributes(Goto->Attributes).
In program write the following code.
Infotypes : 0000,
0001.
start-of-selection.
get pernr.
rp-provide-from-last p0000 space pn-begda pn-endda.
if pnp-sw-found = '1'.
w_itab-pernr = p0001-pernr.
else.
reject.
endif.
rp-provide-from-last p0001 space pn-begda pn-endda.
if pnp-sw-found = '1'.
w_itab-vorna = p0001-plans.--->position
else.
reject.
endif.
rp-provide-from-last p0002 space pn-begda pn-endda.
if pnp-sw-found = '1'.
w_itab-vorna = p0002-vorna. -
>first name
w_itab-nachn = p0001-nachn.--->last name
else.
reject.
endif.
append w_itab to t_itab.
end-of-selection.
Dont forget to reward points if found useful.
Thanks,
Satyesh -
Select-options when Using PNP logical database
Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.Hi,
execute the program. In the selection screen
For eg:
personel Number select the Mutiple Selection option. After that select the tab select intervals and u can give the range.
Regards,
Srinivas -
Anyone have used FTI_TR_COMM_DEAL_EXP logical database?
Hi Experts.
I need to use FTI_TR_COMM_DEAL_EXP (TRM module) logical database in Report. I am very newbie using Logical Databases. Can anyone help me, please?
Thank you.Hi Rochard
Try running
catalog.sql, catproc.sql and catpatch.sql. I think that should solve your problem.
It looks like even the new database created should be run with catpatch.sql after you upgrade you sfotware from your base version 9.2.0.1
thanks
devi -
Use of Logical Database in function module
Hello Experts,
Is there a way of using logical database and Get enent inside a function module.
I am trying to create a RFC for HR module and need this badly. Any help would be highly appriciated.
Thanks,
Gregory fernandoThis fm will work fine with all LDBs including PNP
Have you checked the fm documentation ?
a® -
Use of Logical database in ABAP Queries
hi,
Can anybody tell me when/why do we use logical database in Infosets for ABAP Query?
Regards,
Divyahi,
pros: -you need not to define so many own tables, fields and additional codings in your info set
cons: - performance in huge DB's
A.
Message was edited by: Andreas Mann
Maybe you are looking for
-
Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck" == URL of
-
Hi experts: I got a problem while using graphic function (GRAPH_MATRIX_3D) to create chart, but I find the function can only create column(bar) chart and the maximal column is 6. As per the customer's request, they want to view the chart in line ch
-
Border on left side of page (i.e., line graphics)
I'd like to draw a line on the left hand side of the page, starting at the printable part of the top of the page (say, 3/4 of an inch down from the top) and then run it down the left hand of the page to the bottom (stopping short of an inch or so). W
-
I have nokia 5300?and i downloaded a program in my phone the folder is ZIp??? And when i paste it in my phone it doesnt open?It says file format not supported? Can anyone pease help me?
-
I have looked everywhere I can tink of but can't find anywhere that shows how to set up and use voice dialing. Can someone point me in the right direction please. Newbie to the BB.