How MSS Report passes values to R/3 report using PNP logical db
Heloo Gurus,
I am having some trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.
Anyone ?
plz update.
Similar Messages
-
How does one pass import parameters to a report within a method?
Hello all,
Well how does one pass import parameters to a report which is within a method ...end method.
for example :
method 123
SUBMIT reportname using selection '1000'
endmethod .
Here we need to pass values into the selection screen and run the report for those values.
The values are say 'ABC' ( tablename "DEF" and field name "HIJ" ).
I hope the question is clear, awaiting your response
Thanks and Regards,
Sandeep.Go to SE24
Parameters: Give the Parameter name, Typing method is "Type" is the domain type that u are selecting, say for e.g : Parameter is "P_CONT" , its associated type "CHAR32" etc
For Select Options: Parameter name say "S_CUST", Type"importing". For this you need to give an associated type which must be created as "TABLE TYPE " in SE11. That table type needs to have a "LINE TYPE" .
LINE TYPE is a Structure created with components "SIGN, OPTION, LOW & HIGH" for select-Options.
NOTE: for a Table type related to Customer data fields "say KUNNR", the line type created must have the Component Type and data Type corresponding to the Data Element associated with "KUNNR" ;i.e: "CHAR" etc.
See if this is clear to you or revert back in case of any Confusion. -
Hello,
I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
Regards,
Kshitij RathoreHello,
Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
Regards,
Kshitij Rathore -
How do we pass values and Internal tables to Sub-routines
how do we pass values and Internal tables to Sub-routines
Hi,
You can use the USING..or TABLES..or Changing addition..
Check this example.
DATA: T_MARA TYPE STANDARD TABLE OF MARA.
PERFORM DISPLAY USING T_MARA.
FORM DISPLAY USING LT_MARA LIKE T_MARA.
DATA: WA TYPE MARA.
LOOP AT LT_MARA INTO WA.
WRITE: / WA-MATNR.
ENDLOOP.
ENDFORM.
Thanks
Naren -
How to call & pass values to custom page from seeded page table region
Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purnaHi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y. -
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
How to Read Variable Values in WAD 7.0 Using JavaScript
I found a how to: How to Read Variable Values in WAD 7.0 Using JavaScript on SDN.
I get a Javascript error:
bics.getElementsByTagName is not a function
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
Thats my script:
function currency()
var varnm = "SFS_CP_CURR"; // Name of the variable to be read
root = document.childNodes[0]; // <HTML>
body = root.getElementsByTagName("BODY")[0]; // <BODY>
xml = body.getElementsByTagName("XML")[0]; // <XML>
bics = xml.childNodes[0]; // <BICS_VIEW>
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
varl = vars.getElementsByTagName("VARIABLE"); // gives no. of variable in DP
for ( i = 0; i <= varl.length; i++ ) // Loop one by one
vari = vars.getElementsByTagName("VARIABLE")<i>;
varnam = vari.attributes[0].text; // get variable name
mem = vari.getElementsByTagName("MEMBER")[0];
varval = mem.attributes.getNamedItem("name").value; // read variable value
if (varnam == varnm) //check varname in loop needs to be read
if (varval == "ZMON") // check for value1 and fire command1
SFS_CP_M();
if (varval == "ZKON") // check for value2 and fire command2
SFS_CP_K();
break;
Where's the mistake?I'm afraid I haven't made my question understood clearly.
What I am looking for is a method to get the value of variable inside excel (e.g. put it into a cell / range of a worksheet, so that we can reference it and use it as an input for planning function execution).
Please advice.
Thanks in advance,
Shady -
How to avoid default selection screen in HR interfaces(using pnp ldbs)
How to avoid default selection screen in HR interfaces(using pnp ldbs)
Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen. -
Pass value from previous interactive report to create record form
Hi All,
I am an APEX newbie and have an APEX 3.2.1 application that is still being developed that is working reasonably well. The problem I am having is the following:
I have 3 interactive reports. These are defined on their respective tables, namely, clients, servers, and databases. By clicking on a client name, it shows the servers that are associated with that client. By then clicking on a server, it shows me the databases that are on that specific server. I am able to perform updates, deletes and inserts on all of these.
In order to say create a server, i click on the name of a client and it brings me to the Server Interactive report to see the associated servers. I then click a "Create a Server" link that brings me to the create a server page. The issue i am having is that I would like to have the previous value of the primary key (Client ID) passed from the Server interactive report to the form where i create a new server so that the client ID is already populated in the Create a Server form. Presently, the only way i am able to do this is by defining the client ID column on the Create a server form as a select list and displaying ALL the different clients. By selecting a client name, this list then returns the client id associated with that client name. This is a potential source of confusion for the users and it would be much better if the client ID was already in a text field that is disabled and all they have to do is fill out the other fields of the form.
I would greatly appreciate any help in this matter as I am fighting project deadlines. I have seen other examples that are similar, but i am still experiencing difficulty.
Thanks,
TimHi,
I am still very confused as to how to get this to work.
I cannot have the value passed by clicking the client ID link from the Server Interactive Report in order to populate the Client ID field in the Add Server Form. It MUST be done by clicking an Add Server button that will pass the value as well as take me to the Add Server Form. So far, I have only been able to have the value show up if i click the client ID column on the Interactive report that has a column link defined as follows:
Name VALUE
P9_CLIENTID #CLIENTID#
However, when i do have the value passed this way i receive the following error message which proves that it is not saving the god damn state!
ORA-01400: cannot insert NULL into ("USERS"."NEW_SERVERS"."ClientID")
Error Unable to process row of table NEW_SERVERS.
Even if the value appears in the text field, it isnt really there!
How to make it know the value is there is beyond me.
I dont know what to think of this situation. I have tried all types of settings and I have a feeling it will be 2010 before this is resolved.
It is really frustrating, it has been days i am trying to get this to work...
Thanks,
Tim -
How to pass value to select-option parameter using SET PARAMETER Command
Hi,
Am passing values to selection-screen fields in report RV13A004 ( used in VK11, VK12 and VK13). using below statement but material number is select-option in this report. am able to pass MATERIAL FROM using SET PARAMETER ID, can i know how to pass values MATERIAL TO range in select-options fields using SET PARAMETER Command ??
Passing values to parameter id
set parameter id 'VKS' field kschl.
set parameter id 'VKO' field vkorg.
set parameter id 'VTW' field vtweg.
set parameter id 'KDA' field erdat.
set parameter id 'MAT' field matnr_from.
Change condition price.
call transaction 'VK12' and skip first screen.
Thanks in advance.
Regards,
Balamurugan.Hi,
instead of using set parameters and dden call transaction use this..........
submit RV13A004 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Cheers
Will. -
Reporting - Pass value on url (Querystring)
Has anyone out there had success passing values into Configmgr 2012 SSRS reports through "QueryString?"
I'd like to be able to email clients a report (either that I create or canned) that I can pass a variable in the http url and it presents that data. That way the report can be dynamic - but allow us to email the exact data we want to the client.
I have read several posts it is possible, but I have not been able to successfully do this with any of the existing SCCM reports.
Any ideas or thoughts?So I sort of stumbled upon a bit of the solution after doing a bit of research on the SSRS technet articles. It appears that it matters how you access your reports.
There appears to be a different report engine if you go to ReportServer and ReportViewer.aspx instead of Reports and Report.aspx. The ReportViewer.aspx must give you access to querystring and other command options you pass in including the rs:.
SO - other folks with more SSRS experience may be able to explain with greater details the real reasons this works but if you need to do this - simply change your URL to the following:
http://<ServerName>/ReportServer/Pages/ReportViewer.aspx?%2f<SSRS-Folder>%2f<ReportHTTPName>&rs:Command=Render&variable=<VariableValue>
So a real example would be: http://<ServerName>/ReportServer/Pages/ReportViewer.aspx?%2f<SSRS-Folder>%2fHardware+-+Memory%2fMemory+information+for+a+specific+computer&rs:Command=Render&variable=Computer1
The two keys I saw are:
rs:Command (this forces the report to run and execute and not just load up and ask you for a value)
variable=xxx - this is the name of the parameter in the SSRS report. So you need to edit the report and then determine the name of the actual variable. Also - this appears to be case sensitive.
If someone out there is a report expert and wants to clarify my statement - please feel free to do so. Hopefully this helps out someone else who needs this!
We have requests for data from clients who want a "live report" - but explaining the values in the fiels (or getting them not to type computer names incorrectly) is a pain - so this will help me significantly in day to day reporting for clients!
We also have a report for App Dev folks to see their distributions (pie-charts) - and I can now send them a dynamic report of their specific app w/out having to filter down and remember what I named their package or application. Direct link to their
data!
Thanks again if anyone wants to add to my "solution here" and clarify the technicalities of SSRS and Querystring. -
How can I pass value from sql query to unix script
I am new to oracle/unix.
I want to write a simple script to find max date from a table and then pass date into a variable in a korn shell script.
sql is select max(date) from table;
how can I pass that value in unix shell as a variable. ThanksI use to code like this.
Enjoy Scripting.
cmd.sql
select sysdate from dual;
exit
db.sh
#! /usr/bin/ksh
. ~oracle/.orapaths
dbdate=$(sqlplus -S user/pwd@servicename @cmd.sql)
echo $dbdate
Run shell scripts
./db.sh
SYSDATE --------- 19-JAN-07 -
Report: passing values to item page
on Apex 3.2
Hi,
I need help.
Does anyone knows a way to pass values from a report to a page item?
This is what i want: when i run a report i want to fill a page item with the value from an item report.
Thanks,Hi Austin,
Thank you for your reply.
I've writen a query that gives me the accounting movements.
In this query the user can pass the rownum because there are about 1million records in the partitioned table.
But the diference between credit and debit must considered all the movements that are not closed.
I'm using analitics functions to do that, so for each line the value is already calculated.
With one report region: If i group and break the report it takes about 13 seconds to display the information.
If two report regions: One for the movements other for the "Debit: Credit: and Total:". It takes about 6 seconds to display the info.
Its more fast, but i have to run the query twice. The idea is to run only once.
The values that i want to pass from report to page items, Debit: Credit: and Total:.
Is there a way?
Thanks, -
Report-Report Passing Values with SMOD_RSR00004
Hi,
I operated the BADI SMOD_RSR00004 which suppose to help in mapping values from a sender report to a receiver report.
I didn't succeed to see in a debug mode the sender query's time characteristic value I used.
I mean that all the rows/columns characteristics of the sender query are available on the BADI method in a debug mode, but the column time characteristic of the sender query is not.
Also, does anyone know how should I enter the values I mapped to the export parameters in the method.
I found a good documentation here:
RS_BBS_BADI documentation,
But my problems I presented here has no solution mentioned there.
Best Regards,
Shani BashkinHi again,
Does anyone have any idea for solving this problem???
Thanks,
Shani Bashkin -
Hierarchal Columns and Passing Values to a Detail Report (Action Links)
I have a question in OBIEE 11.1.1.5 around Hierarchal Columns and passing the values to a detail report. I have create a report with a Hierarchal column (Two Levels only), Month Column and a metric.
I created a detail report and see both columns used in the hierarchy to "is Prompted" as well as the Month column.
On the Summary report I put an Action Link on the Metric to navigate to this Detail Report. When I select the metric I see that the Month value gets passed to the Detail Report but none of the Hierarchal columns have been passed at all.
When I replace the hierarchal column with just the two columns, the values get passed fine.
Is this a known issue with Hierarchal columns? Is this functionality even available?
ThanksI am assuming then that no one has attempted this on the forum?
Maybe you are looking for
-
Session tracking and Internet Explorer
Hi, I am currently maintaining a servlet application, on apache/jserv. This application implements a session tracking using a shared static hashtable of session data, associated with session id's. This application may open more than one client browse
-
How do i get the table_names and no of rows in a session
how do i write a select statement to retrieve the all the table_names and number of rows in that table in a session. for example i should get the output as below tab_name no.of rows tab1 40 tab2 50 tab3 25 thank u for the help
-
How to solve error - default position not allowed
Dear friends, While hiring a new person i am getting the error "default positon not allowed" in infotype 0001. PLOGI-PRELI switch for default positon is maintained. Kindly help.
-
Mail won't let me add a new account. How do I fix this?
I have tried selecting "add account" and using the + option, and nothing happens at all, either way.
-
Does the more pictures you have in your library slow down Lightroom?
Hi, I have almost 10k photos in my LR5 library. I was wondering if that slows it down? Thank you in advance.