Positng of Variation margin for Equirty Futures

Hi
WHile posting variation margin  , error msg  encountered "
Enter rate  / USD rate type M for 15.04.2011 in the system settings
    Message no. SG105
Diagnosis
    For the conversion of an amount into another currency, an entry is
    missing in the currency conversion table.
Procedure
    Add the missing entry in the currency conversion table.
    Execute function
    You can then continue to process the commercial transaction.
Can any one help. I am posting VM in INR only.
Regards
Vimal

Hi,
Your company code crcy might be INR.  But in case if your future class crcy is USD, then even if you are posting you VM in INR or any flow in other flows in INR, then system would maintain position flows for the future class which is based on the future class crcy.  Hence you need to maintain the relevant crcy rates for INR/USD.
In case if your valuation area currency is USD, then also you need to maintain these settings.
Regards,
Ravi

Similar Messages

  • Accounting of Variation margin - Equiry Futures

    Hi Experts
    I have created separate update type and flow type for Initial Margin. Not able to post one leg in Customer Account . It is allowein posting GL to GL .  I want GL to Customer posting.
    Regards
    Vimal

    Hi Vimal,
    Variation margin transactions read payment details from the futures account master data, where the u201Cpayment transaction flagu201D is missing. For some reason TRM  allows us to create payments to customer accounts or payment requests everywhere except for future account payments.
    The only workaround that I know is using BAdI TPM_ACCIF_TRAC to force the posting to a customer account, using  the ACCIT_EXIT method to fill the fields koart and kunnr.
    If you find a better way to do this, please let the rest of us know, Iu2019d be interested.
    Regards,
    Daniel

  • Setting margins for "Create PDF from Clipboard"

    I'm posting this because I could not find another question that dealt with my problem directly, but after A LOT of searching, and a few failed attempts, I did find the solution.
    Problem: When creating a PDF from content copied to the clipboard from a webpage, everything on the page was way off-center, with almost no left margin.
    Once the PDF was created, since there is no easy way to adjust page margins, the only way to center everything would have been one page at a time (for 24 pages), by dragging the page contents manually to the center of the page. I tried using the "Set Page Boxes" function, but I ended up with 24 blank pages. Yes, I could export the PDF as a Word document, and then reprint that Word document as a PDF, but I knew there had to be a simpler way.
    Solution: When you create a PDF from a clipboard containing text (or in the case of the above document, text and images), Acrobat uses the settings for "Create PDF from Web Page."
    Unfortunately, if you look up Convert clipboard content to PDF in Acrobat Help, it doesn't tell you that. AND the settings for "Create PDF from Web Page" are NOT included in the list of settings under Preferences > Convert to PDF. There is an HTML option in that list, but there are no editable settings for that file type (There are actually quite a few such file types listed there, and my question is, if there are no editable settings, why are they even listed under Preferences?). Batch Conversion of Text Files also uses the same settings.
    So, here's how to do it:
    Select File > Create > PDF from Web Page
    Click on Settings
    To adjust the default margins for new PDF files created from a clipboard containing text, select the Page Layout tab, and adjust the margins to your liking. Notice how small the Default right and left margins are... hence my problem.
    Click on OK to save your new settings, and the simply Cancel out of the "Create PDF from Web Page" dialog box. If you read this page, it says you have to actually create at least one PDF file using the "Create PDF from Web Page" dialog in order for your settings to stick, but I never did, and my settings were saved just fine.
    If you're copying basic text (or converting text files), that's all there is to it.
    With web page content, there could still be a problem (as there was with this web page), if the content you've selected is not the full width of the web page. I think this has to do with the fact that web pages often use Content Style Sheets to format their page elements, and those styles are transferred when you copy that content to the clipboard. The PDF page margins are technically correct now, as you can see by the position of the image at the top of the page, but the text portion (at the bottom of the page) of the PDF only fills the same percentage of the text area (between the margins) as it did on the web page.
    The only solution I have found if this happens, is to export the PDF as a Word document, and adjust the margins there. In the document I was working with in these examples, there were boatloads of different invisible subsections to the document, and each subsection had different settings for right and left indent, fonts, font sizes, etc., so there was a lot more to it than a simple 'copy & paste' type of procedure. Once I corrected all the different elements (and this one had a whole lot of weirdness going on), and then printed it as a new PDF, everything looked much better.
    Hopefully this helps someone else find their answer much easier than I found mine
    And of course, comments and suggestions are welcome.

    Thanks for asking. Yes, with either the Crop tool or the Set Page Boxes tool, I could trim the page just fine, removing the excess from the right side, but as soon as I tried to add space to the left side, it just blanked out the whole page. It seemed like it should have worked, and maybe on a simple text file it would have. But that particular array of content proved to be most troublesome.
    I also could have just cropped the page down to 6.5 x 11, and then centered it when I printed it.
    My primary goal in searching for the answer, and my main reason for posting this, was for setting the margins for future documents (and to help others find those settings,too). Since I still had the web address, I could easily recreate the PDF once I figured out how to set the margins. Of course I didn't realize that there would still be problems once I got the settings right. Like I said, that particular web page seemed to have several unique difficulties.

  • The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

    The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode. 
    Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!!  I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

    Drag it over to the Left. Then lock it there.

  • Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

    Hi,
    I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
    Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
    ran configuration wizard.
    But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
    "Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
    The Variations Create Hierarchies job failed with the following error message&  Unknown failure when creating a variation of site
    http://server:port/en in label fr."
    Am not sure what is going wrong. Appreciate a feedback.
    Thanks,
    SSP
    SSP

    Hi,
    According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
    I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
    Here is a similar thread for you to take a look:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How to permanently remove "This Connection is Untrusted" notification for all future websites everywhere forever?

    Dear Mod/Helper/Whoever
    Please read this entire post before answering since it addresses virtually all the most popular "solutions" for this problem and they DON'T WORK.
    I've already found this and it was of no use: https://support.mozilla.org/en-US/questions/1015256?esab=a&as=aaq
    The moderator's blatant copy-paste response was an insult and not helpful at all.
    My system date is ok and the cause of invalid certificate is the LEAST of my concerns. I just want to browse the website and not get ANY warnings about ANY invalid certificates or ANY risks involved, period. All popular workarounds with settings/advanced/validity properties have been tried but none of them fix this for me. I want FF to accept all invalid certificates instantly without notification or warning, no matter what.
    I want to remove the warning screen "This Connection is Untrusted" permanently for all future references, so that I don't even see any errors related to it when I browse a website.
    I'm not here to argue the merits or lack thereof for this action, I just want to get rid of it.
    I'm running a lot of custom software on my comp and I have 3 LAN cards connecting me to 3 different networks with varying degrees of security and this notification is a huge pain in the... back, because it eats my time every day.
    I've been using Firefox for years exactly because it didn't have stuff like this in the past - I could visit all the funny/suspicious/malicious websites without problems, where IE would have died 10 times over. Sadly that FF feature began changing to the worse in the past years, an ever-increasing slope downwards for this once great web browser.
    I KNOW all the risks involved and I don't care. In fact I encourage websites to try and install "stuff" on my computer because as I mentioned, this is a special computer. I'm visiting 40-50 websites with that prompt DAILY because that's what I do for a living. Every time I have to add an exception is a wasted effort and time. I'm running other browsers as well but FF is my focus due to its popularity.
    Please for the love of all that is sacred, provide some sort of workaround for this without the need to install an addon or click "I understand the risks" a gazillion times. An "about:config" variable would be nice but apparently it's not there, I looked.

    That is not possible as that would expose you and other Firefox users to unacceptable security vulnerabilities.
    The normal procedure is to contact the website maintainer and ask them to fix the certificate chain or install missing root certificates in Firefox and set the trust bits accordingly.
    If you do not care about certificates then why don't you install proxy software and use that proxy and let it handle the certificates and import the root certificate of that proxy in Firefox?

  • I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

    I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

    I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
    Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

  • I'm running out of hd space on my MBP with Mavericks. How do I move my Photoshop 5 app off the computer for more space. How can I store the PS5 app on DVD or on my backup hd for a future reinstall on my next Mac?

    I'm running out of hd space on my MBP with Mavericks OS. How do I move my Photoshop 5 app off the computer for more space, and store the PS5 app on DVD or on my backup hd for a future reinstall on my next Mac with larger hd?
    Thanks

    slaglejrp,
    perhaps it would be less expensive to just install a new disk with a larger capacity on your current MacBook Pro, rather than plan on buying a new Mac with a larger disk? Once your current disk has been cloned to the new disk, and the new disk has been installed into your MacBook Pro, that would allow you to keep Photoshop 5 on your current MacBook Pro.

  • Setting different top margin for first page

    I have been trying to set a 5cm top margin for the first page of a thesis chapter and a 2.5 cm top margin for the rest of the pages to conform to requirements. I have set a section break and gone into Inspector to make first page different but I still get any margin changes on the first page through the whole document. I do what HELP says but it isn't working. Anyone help me out before I go troppo?

    The easiest way to do this, especially if all the text ina particular chapter is in the same section, is to just set the 'before' value in the Layout Inspector. As text flows from one page to the next, it will conform to the global setting. If you insert a Section Break, the new section will start on a new page and the first line will be down the same amount as your initial chapter page. If you insert a layout break it will also be moved down that initial amount.
    If you want to capture this behavior you can capture multiple pages to use as well. Some of the preset templates have multiple pages where the first page has different characteristics than the subsequent pages added when oyur text overflows from the first page.

  • Report for "Margin for each selling"

    Hello Gurus,
    I'm searching for a report which shows me the margins for each selling. Is there a standard report in the EBS which contains the following values:
    * OrdnerNo.
    * TRX_ID
    * TRX_Number
    * Date
    * Customer_ID
    * Party
    * TRX_Line
    * ITEM_ID
    * SKU
    * ItemName
    * Amount (Orig Currency)
    * Amount (EUR)
    * Orig Currency
    * Quantity
    * Cost_of_Material
    * Gross_Profit
    Pls advice.
    Thank you very much.
    Best wishes,
    Dirk

    Dear Amit,
    I think S_ALR_87013564  report will help u.
    plz check.
    Regards
    Lallan

  • Setting a global margin for any documents to print

    Hello,
    On a Mac running OS X, I have a ruby/java script allowing me to open a Microsoft Word document and print it as a PDF (and extra stuffs, but that's not part of the problem). During the conversion from Word to PDF for most of my documents I get a dialog saying 'A footer of section X is outside of the printable area of the page...'. What I would like to do is not to write a script to click 'yes' when a dialog open but to try to set the default margin for printing to 0. In the 'page setup', there is an option to create customized 'paper size', with a giving width, height and margins (that I can set to 0). By default the paper size is selecting A4, but I would like to find a way to set this paper size as a default to my customized paper size for any document opened on Microsoft Word or printed as PDF!  If I select manually the customized paper size after I open the document on Word, I can print it without having the dialog.
    So my question is to know if there is a way to set a global margin for printing to 0 (let me know if I need to use Acrobat Pro, Distiller etc.), whatever the way is.
    Thank you very much!
    Vincent

    Alan,
    There is nothing specific with the SDK that you have to print a marketing document such as a Sales Order, PO, etc.  What you may want to look at in the 2005A SDK is the "PrintEvent" object.  This event lets you catch a print event in the SAP Business One application, get the relevant data that is sent to the printer and then edit it using a third-party editing tool such as Crystal Reports. The PrintEvent event provides an exit point that allows you to integrate third-party tools for reporting and document editing.
    You can look at the sample code for the PrintEvent here ...
    ..\Program Files\SAP\SAP Business One SDK\Samples\COM UI\VB.NET\20.PrintEvent
    HTH,
    Eddy

  • How do I set the default print margins for ALL printers in mozilla.cfg

    How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
    I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • Planning for the future...

    I've just started using Garageband to write my own music but as I'm more used to pro studios I'm finding it a little limiting, and consequently looking to upgrade to Logic.
    This will probably mean buying a new machine. So, can anyone give me some bits of advice?
    - What is the minimum size of Mac I should be looking at?
    - Will any off-the-shelf mac be able to cope with running Logic and recording, or do I need to get anything customised?
    - Should I use one machine exclusively for music?
    - I will be recording anything from vocals to guitars, so what sort of interface should I be looking at?
    - Is it as simple to write songs in Logic, or does it make sense to use GB as a "scratch pad" for building basics and then transfer to Logic to "take it to the next level"? Or am I just over complicating things?
    - Should I really be doing this? Help...

    1. You've got to be more specific
    2. Yes, but a RAM upgrade is customary. 1GB should be considered an absolute minimum. A Hard drive for audio is also good if you use many tracks or samples,
    3. That depends on what else you do. I don't do it. It is a good idea if you need it to work under high stress sutuation every day...otherwise you could start with 1 and see how things go.
    4. Vocals to guitars...well if that's all you need...then an interface with 1 in and 2 outs would be the absolute minimum....realistically you should plan for the future. Get a sytem which has more I/O than you think you'll need and is expandable...someday you may need to record a drumkit and may have to start all over if you chose poorly. For I/O... I would consider more than you think you'll need. If you think you may need 2 ins max... consider 4 ins 4 outs...this is very small number of I/Os today. But if you know your needs ahead of time getter better converters instead of more is a very good idea (espescially if the system can expand well).
    5. They share amny things... I find GB cumbersome to edit, whereas somebody else finds it's lack of features perfect for no distraction. I think eventually you'd just start using Logic full time. There are things GB won't touch.
    6. <shrugs>
    J

  • HT4865 When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow.  I try bridge mode but the internet doesn't work.
    You building supplied internet is a cheap service that is without proper routable addresses..
    Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
    Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
    Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
    You can put a password on the wireless.. go to the airport utility and put in a password.
    Other than that I don't understand what password you expect.
    Can I get an explanation of what bridge mode is?
    No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
    Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
    Double NAT, and set your own wireless names. There is no alternative.. sorry.

  • I do not want a update automatic obligatory for the future firefox !!! Are we able to choose?

    I do not want a update automatic obligatory for the future firefox !!! Are we able to choose? PLEASE WE WANT CHOOSE !

    Hit Alt then T then O. It will open the options dialog. Select the Advanced Tab, then select the Update tab. There will be an option to not check for updates. I would however strongly encourage you to upgrade to the latest firefox. It's much safer, faster, and easier to use.

Maybe you are looking for