Possibility to abort the execution from within the PreUUT and MainSequence

Hello,
This is probably a TS newbie question that most of you can answer right away!
I'm using the sequential model to develop my test. I cannot figure out how to do terminate the execution from within the PreUUTLoop or MainSequence callback.
In the PreUUT you can manipulate the parameter ContinueTesting to indicate to the process model that you want to stop testing.
For the PreUUTLoop and MainSequence callback this parameter is not available.
I could modify the process model itself to also supply me this parameter for the PreUUTLoop and the MainSequence. (and check for it on return from these callbacks)
But, I was wondering, is there another (maybe even better) way to do this?
Thanks for the help!
noxus.

Thanks, that's what I was looking for.
One extra question:
- From the PreUUTLoop callback it is working fine. (immediately stops the execution)
- From the MainSequence callback I still get the popup message "Next UUT" or "Terminate". Can I avoid this popup message and just Terminate the execution? (preferably without modifying the process model)
or, another alternative is that I disable the "Test UUT" entry point and only allow the user to select "Single Pass". Is that possible? Is it possible to disable the "Test UUT" entry point for the sequential process model?
Message Edited by noxus on 02-22-2007 04:17 AM

Similar Messages

I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email and thank you

Dear,s
I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email:
<Email Edited by Host>
Thanks

You are not addressing Apple here. And your post is a bit confusing. See Klaus's answer in this thread:
https://discussions.apple.com/thread/5228474?tstart=0

Is it possible to fire DDL queries from within a trigger?

Hi,
In Oracle 8.0.5, Is it possible to fire DDL queries from within a trigger?
e.g. when no. of rows is multiple of 1000, I wish to call a procedure which
analyzes the table and finds the size of the table. I am getting :
"ORA-04092: cannot COMMIT in a trigger" error message.
Regards
Sanchayan

One way around this is to use the AUTONOMOUS_TRANSACTION pragma, but I think that was introduced in 8i. Check your docs. Another way is to set up a procedure to do the ANALYZE and in your trigger submit a job using DBMS_JOB to run that procedure.
Anyway, the second option is best because you really don't want to impose the overhead of running an ANALYZE onto a DML transaction.
You are also going to run into the mutating table problem: you can't find out how big the table is, because you can't run queries against the table from within a trigger. You could use DATE_LAST_ANALYZED from USER_TAB_COLUMNS, but really you should just schedule jobs to run ANALAYZE at regular intervals - once a day, once a week, once a month, depending on the volatility and usage of any given table.
Cheers, APC

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
    A   B   C
========
1   o   p   q
2   r   s   t
3   u   v   w
Table 2
    A   B   C
========
1   o   r   u
2   p   s   v
3   q   t   w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
   =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
   =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
  Example:
  =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

Possible to delete the Layers and Signatures icons?

I have a pdf wth bookmakrs and have the pdf to open in bookmakrs mode. Is it possible to delete the Layers and Signature icons from the panel on the left? Would only like to show the bookmarks icon.
thanks

Not possible.

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

My iphone does not have facetime on it. I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before. Is it possible to reset the phone and then just restore a portion of the old information?

My iPhone does not have Facetime on it. I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before. Is it possible to reset the phone and then just restore a portion of the old information? I've tried several pass codes and now am locked out for an hour after being locked out for 5 minutes and then 15 minutes. It said that I had tried 7 pass codes prior to these, but I don't remember ever trying to get into restrictions before.
I've looked up other posts on this, and my phone was purchased in the US and does not have an AE in the model number.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

IPad: Launch YouTube, click Add a comment. Google sign-in box cannot be dismissed by pressing the X. This was not the case in any of the four iPads in earlier OS versions. Only occasionally it is possible to press the X and close the sign-in box.

iPad: Launch YouTube, click Add a comment. Google sign-in box cannot be dismissed by pressing the X.
This was not the case in any of the four iPads in earlier OS versions. Only occasionally it is possible to press the X and close the sign-in box.

if this is the first time to happen in this version of the app. then it may just be a flaw with that version, if you have already un-installed and re-installed the app then it will just be a waiting game at this point until youtube hears and it and fixes it

Is it possible to extract the text and images using PHP

Hi friends,
Is it possible to extract the text and images using PHP, in the same order as it is in the PDF?
Else is it possible extract the same as XML using PHP, or ASP
I googled it but its in vain, any help is appreciated.
Thanks in advance.

Dear Mike,
Thanks for your quick reply,
I mean is it possible to parse the PDF line by line using the PHP.
I extracted the whole text but couldn't the images. Since the PDF's images are decoded using various methods like DCTDecode, JPXDecode, etc.
The text is decoded with FlateDecode, which i breaked using a function in PHP.
Thanks,

I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

It is not possible to merge Apple IDs.
Why did you create a new one?

Is possible to purchase the program and host it on our own server?

Is possible to purchase the program and host it on our own server?

Like so many questions, the answer is: yes... maybe.
Mac OS X Server includes a web server, so it's entirely possible (trivial, even) to create a web site on your server.
Making it available to the outside world depends a little bit on your network connection - you'll probably need to tweak your router/firewall configuration to let external connections into your server.
Then you also need to consider your network speed - remote users will be limited to the upload speed of your link - if you're on a residential link that might not be all that fast. In addition, many large ISPs restrict the running of servers on residential connections (you don't say whether your server is located on a business or residential link).
Beyond that, though there are various back-end technologies that you can use to add dynamic elements to your pages (so they're not just static HTML pages). Things like PHP, Perl, Ruby, Python and more are built in, as is MySQL if you want a databased-driven site. Some technologies are not supported, though, such as ASP. Therefore you might need to consider what dynamic content system (if any) you want to run.

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

Is it possible to sign the transport and its content?

Hey Everyone,
Is it possible to sign the transport and its content when I release transport? So that when a particular transport is imported into destination system we can say with certainty that transport is not tempered with?
I am more worried when we give data and cofile to be imported into some System it may be tempered with so that it may look like the same transport but its contents are modified. (I am not sure even if its possible for somone to modify these files and hence the actual ABAP Object in it are changed.)
Of course, it is possible to sign the file content itself and send it over, but I am trying to minimize the risk even more so that when we release transport or when someone is importing it signing is automatically done or checked.
Thanks,
Nilay

There is no way of sense water and CO2 by a single sensor.You could be able to measure CO2 and water seperately but before that i need to know much details and chemical specifications about your liquid.

Is it possible to get the decline and answer buttons from sleep mode?

The way my iphone operates now, when a call comes in and the phone is in sleep/locked mode, the only option is to slide the lock to answer the call. When a call comes in and the phone is not locked, it gives the option to decline the call with a red button and answer the call with a green button. My question is this: Is it possible to set the phone so it gives the decline/answer option coming straight out of sleep/locked mode?

Nope. But single clicking the Sleep/Wake button will silence the ring, and double-clicking the Sleep/Wake button will send the call to voicemail, having the same effect as "Decline."

Is it possible to Remove the inbuf and outbuf tags from a SALT exposed Tuxedo Service?

Hi All,
Currently I have the need to expose my tuxedo Service in a pre-created WSDL file (with all the fields names and namespaces already defined). Searching the web and the examples presented in the Tuxedo and Salt Package, I was able to configure most of the fields but still can't remove the wrapper inbuf tag.
Is there any parameter or configuration I can use to eliminate this tag so I can expose the SALT generated WSDL the way I want? Or is it a requirement for every tuxedo service to have his input exposed that way by using SALT?
If you need anything else in order to provide an answer for this, please let me know. I'm also open to any sugestions.
Thanks in advance,
Brunno Attorre

Hi,
You would need to set the environment variable GWWS_WSDL_NO_BUF_WRAPPER="Y" (and restart the GWWS server).
This should prevent the <inbuf> and <outbuf> tags from being added but it may depend upon the SALT release and rolling patch
level you are using(i.e. if it is included or not)
Regards,
Bob Finan

Possibility to abort the execution from within the PreUUT and MainSequence

Similar Messages

Maybe you are looking for