Possible to connect the iPad VGA accessory to a DVI display?
I have the VGA accessory. It connects to an old CRT/VGA display and looks pretty good but my current display is a LCD/DVI unit.
Is there an adapter available that can adapt from the VGA female to male DVI?
Thanks.
Theoretically? yes... Realistically? You'll have to try to see...
Check here for the part: http://www.google.com/products/catalog?q=vgato+dviadapter&oe=UTF-8&hl=en&client=safari&um=1&ie=UTF-8&cid=15028545843490663161&ei=4 3CITIbFoL6lwf16-kj&sa=X&oi=product_catalogresult&ct=result&resnum=1&ved=0CDEQ8wIwAA#ps-sellers
Similar Messages
-
I've always used PC and I'm planning on making the transition to Mac. That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time. Is that true? I'm a speaker and that was the main reason I was considering buying an iPad, so I didn't have to carry my laptop. Thanks for your help!
Thanks for your reply. Looks like it can as I have just found this https://www.youtube.com/watch?v=nKp02y4JXVs
-
Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?
You can purchase an adapter from apple that uses the monitor cable from the projector, its the same one that is probably connecting either your laptop or school workstation. On the projector control you might need to refresh the source.
-
Connecting the ipad to a data projector when projector is on the ceiling
I am trying to connect the ipad to a data projector when projector is on the ceiling. I have the VGA cord but it is way to short ...is there another cord to connect the both?
It is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.
-
Error 0xE8000065 on my iTunes when connecting the iPad to my MacBook Pro
hello! a couple of hours ago, I tried to switch off my iPad. flipped the finger over the red arrow and the classic wheel started to run... but the iPad never switched off. is still "thinking"... then, I connected the iPad to the Computer (MacBookPro OS X 10.7) and iTunes shows an error message: 0xE8000065.
I've read everything about it. The problem is that all the possible solutions don't contemplate the possibility of the iPad not been able to be switched off because is in a kind of loop, or blocked... I don't know what to do. I've called Support and they don't work on sundays. Any similar case that can give me some light on this problem? never before my iPad got stuck and were not able to be shut down and restarted again...
halps in advance
fernandofrommadridyes, I read "everything" including this article, which is mostly for PC users. I am a Mac user. In the last part of the feature they explain what to do with a Mac computer, a test that of course I did before putting my request in this forum, but as I explained, none of these answers take into consideration the fact that my iPad was in a kind of loop and couldn't be accesed. So I tried, and succeed, to do a hard reset and it worked.
thanks for the link -
Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.
Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
Apple won't permit PC software that infringes its proprietary apps.
Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
Classrooms are not able to keep up with the technology of using the iPad
Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts. -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
I want to send a VGA signal to a couple of iPads using them as monitors. I currently use a pair of regular 13" VGA 1024x768 lcd monitors looping thru an LCD projector displaying the same signal sent to the projector.
I want to use the iPad VGA adapter and WIRE them in just like a convention LCD monitor. Yes there are apps like air display and others but they don't allow cloning and have latency issues and must be networked. I need an app to use the VGA adapter and actually wire them in using a VGA signal from my existing VGA distrubution amp.
The size of the iPad is perfect for my application however I cannot find an app to let me send a signal into the iPad via VGA adapter.
Any ideas?
thanks,
the Shermhttp://www.shapeservices.com/en/products/details.php?product=idisplay&platform=i phone
Cool ... takes on all of the complex-ip-aliasing to turn the Mac into the center wi-fi a screen share netork -
When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?
Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?
-
iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?
I have had the same issue since day 1 of the ios5 installation. I always hit "Cancel" and then the iPad eventually shows up again in iTunes. Then a few hours later, I get the same message again. Annoying, but I've not found a way around it.
-
How do you connect the iPad too, How do you connect the iPad to apple tv
How do you connect the iPad to Apple TV
On the same network and same apple ID with home sharing turned on they should connect.
-
I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!
You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network. -
i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please
You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock -
When I purchased my iphone and ipad last week they told me I would connect the ipad to the internet through the phone but can get niether the phone nor the ipad to see the internet?
Connecting the iPad to the internet via the iPhone is done by setting up a personal HotSpot, but you have to have that supported by your carrier and have to have established the account to do so.
On the iPhone, Settings > General > Network > Set Up Personal Hotspot
Maybe you are looking for
-
Hi When i click on the print version in the portal, i can take the printout of the report in the PDF format. When i have only 6 columns in the report then all fit in one page. But if i drill down and add one more column to the report and try to do th
-
New wifi card for PowerBook G4 (2002, OS 10.4.11)
Hello, Can anyone recommend a wifi card for a PowerBook G4? I've just bought a secondhand model, and I'd like to broaden its wifi capability. Being able to use WPA security would be a good start. - Richard
-
Unable to find BAPI in the explorer
Hi Guys, This maybe a common issue. But i was unable to find the solution. I am using ECC6.0. I have released the business object and the method successfully. I could also test the method. After that i generated the Business Object successfully. Bu
-
Report RFFOAVIS_FPAYM with E-Mail -- Error SO619
Hello, we are sendung SEPA prenotifications to customers during using payment run with transaction F110. Here we are creating output messages (email) with report RFFOAVIS_FPAYM. Printer is MAIL. Sometimes we are getting error messages that some messa
-
Target Currency 0MEANTODAY does not exist
Dear Experts, I got this error while execting a report. Error Msg: Target Currency 0MEANTODAY does not exist. Kindly suggest. Regards, KV