Possible to find MIN of UITextFields with corresponding UILabel as the Result in Obj-c?

I'm wanting to do the following:
12 UITextFields (each will call an int that ranges between whole numbers 2 - 200)
12 UILabels that correspond to each UITextField ("Month 1" Label corresponds/belongs to "Month1" TextField and so on..)
and have the UITextField that contains the lowest number print in a Results UITextField the corresponding Month.
IF there is a tie on only the lowest ranking number of the 12 (i.e. Month 1 & Month 12 both equal 5 and 5 is the lowest number of the 12) the output has to be the Month closest to 1. (in this example it would be "Month 1")
Currently the following is not working (after declaring the ints "a" thru "l"):
min(a,b,c,d,e,f,g,h,i,j,k,l) = min(min(a,b),c), min(min(d,e),f), min(min(g,h),i), min(min(j,k),l);
Where am I going wrong? What am I missing here? Thanks.

This is a little method I worked up:
test.h
-(int)findMin:(NSArray *)arrayOfIntegers;
-(void)callFindMin;
test.m
-(int)findMin:(NSArray *)arrayOfNSNumbers
    int min = 0;
    for (int i=0; i<[arrayOfNSNumbers count]; i++)
        if (i==0)
            min = [[arrayOfNSNumbers objectAtIndex:i] intValue];
        if ([[arrayOfNSNumbers objectAtIndex:i] intValue] < min)
            min =[[arrayOfNSNumbers objectAtIndex:i] intValue];
    return min;
-(void)callFindMin
    NSNumber *a = [[NSNumber alloc]initWithInt:200];
    NSNumber *b = [[NSNumber alloc]initWithInt:100];
    NSNumber *c = [[NSNumber alloc]initWithInt:10];
    NSArray *array = [NSArray arrayWithObjects:a,b,c, nil];
    NSLog(@" min=%i", [self findMin:array]);
    [a release];
    [b release];
    [c release];
No guarantees but I did a little bit of testing and it seemed to work.

Similar Messages

  • Is it possible to find out which user was used to delete the job?

    Is it possible to find out which user was used to delete the job?
    Any logs?

    Hi,
    You can find who are the users who executed sm37 in ST03N.
    This might also help you in analyizing.
    Regards,
    Vamshi.

  • Is it possible to find a stolen MacBook with only the serial number

    The police in Mexico told me that it is possible to find a MacBook or an Ipad by tracking it with only the serial number, anyone that may have done it ... Thanks

    No. That can't be done.
    Ask them to show you how.
    Allan

  • I have Photoshop CC 2014 on my Mac and cannot find Mini-bridge under file, window or in the online add-ons.

    Was Mini-Bridge discontinued in Photoshop CC2014? It is not under the file or Window menus. I cannot find it under add-ons on line. I have a Mac, is that why I'm not seeing it? Any help would be very useful.

    Aricia93313 wrote:
    Was Mini-Bridge discontinued in Photoshop CC2014?
    Yes.
    See Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
    "Mini Bridge
    Mini-Bridge is an Extension Panel using Flash and therefore must be removed now that Flash is no longer supported in Photoshop. Bridge CC remains available as a stand-alone file browser application for designers and photographers needing to browse non-photographic file formats.
    Lightroom, which is available with Creative Cloud and the Photoshop Photography Program, is an alternative for photographers as a way to work with multiple photos and hand them off to Photoshop for additional processing."

  • Is it possible in finder to arrange folders by kind and then the subfolders by a different criterion, say by name?

    In finder, I would like to sort the main folders by kind and then the subfolders by name.  Is it possible to do this in Finder?  I cannot find a way so far.  I am a newbie to Mac having been PC based for all my computer years!!  HELP!

    Here's what it should look like: the Documents folder:
    In the Finder, with Command-J:
    Do the screen shots make more sense than my explanations, maybe?
    Clinton

  • After doing a search with firefox 4.0 the results are unaccessable and friefox is unresponsive

    I have just upgraded to firefox4.0 . but when I do a search,
    I cannot access the results a timer appears and firefox is un responsive , bookmarks and shortcuts work fine

    Confirming that doing the full uninstall (deleting all local content) did fix this issue for me across all 3 PCs I was having the issues on.
    I did take some time to see if I could find something in AppData or about:config I could delete/reset to avoid doing the full uninstall (because I'm sure there's something in there that just got corrupted), but had no luck.

  • Welcome Find and share solutions with Apple users around the world Ask a Question

    I ignored an emergency call on my iPhone 6, and the phone was disabled for three minutes. What is that all about? I am not even sure that the emergency call was legitimate.

    Sorry - no clue what you are describing. Can you provide full detail of what happened, and how the title of your post is related?
    Cheers,
    GB

  • Cfolder with SRM, role and the result not match

    Dear All,
    We are using Cfolder in SRM. But I found I cannot control it by role.
    For example, the Cfolder user only has a 'Read' role in the  Collaboration area or Public area, but this user still can create or delete any folder or document in this area.
    Very appreciate your help!!!
    Karl.

    Maybe your answer is part of the problem, this photos I took with Sony RX100 M3 and I do not find the right profile for this camera.
    But why the pano work perfect with the PS CC?
    Thank you

  • Web services with multiple elements in the results

    We are using ASP.Net and LiveCycle Forms with LiveCycle Designer 7.0. LiveCycle forms is running on JBOSS (turnkey installation). Our problem is that if the web service returns multiple results e.g.
          £12.99
          Widget
          £0.99
          Grommett
    The form does not grow to accommodate the extra results. Has anyone had any experience of this issue. Adobe say it can be done but so far we have had no luck.

    <[email protected]> ha scritto nel messaggio <br />news:[email protected]..<br />> We are using ASP.Net and LiveCycle Forms with LiveCycle Designer 7.0. <br />> LiveCycle forms is running on JBOSS (turnkey installation). Our problem is <br />> that if the web service returns multiple results e.g.<br />> <products><br />>   <product><br />>      <price>£12.99</price><br />>      <description>Widget</description><br />>   </product><br />>   <product><br />>      <price>£0.99</price><br />>      <description>Grommett</description><br />>   </product><br />> </products><br />> The form does not grow to accommodate the extra results. Has anyone had <br />> any experience of this issue. Adobe say it can be done but so far we have <br />> had no luck.<br /><br />You have to create a subform that has flow content, then flag "repeat the <br />subform for each data item" (or something similar, I've not Designer <br />installed on this machine). Remember to save as dynamic PDF.<br /><br />Bye,<br />Alessio

  • Is it possible to find or export the Stationary in the Mail application?

    Hello,
    I normally use the Mail for e-mail but at work I'm on a PC and use Outlook Exchange which has me experimenting now with Entourage 2008. I figured out how to add background in Entourage but is it possible to export the Stationary section in the Mail app so I can use it as a background in Entourage?
    Or where is the Stationary part of the Mail located on my hard drive? Not sure if this can be done but I love the Stationary feature in Mail and want to try and get it in Entourage.
    I would appreciate any tips you might have.

    This is the answer I found on another forum:
    stationary for mail is stored in /Library/Application Support/Apple/Mail/Stationery - there's more folders after that, so you'll have to keep drilling down, but that'll get you there. each stationary item (.mailStationary extension) is actually a package folder with all the images inside, organized using an html template and a plist file. unless entourage supports a direct conversion of mailstationary you'll have to muck with it to get the results you want.
    It's the best solution I can find but not sure I want to attempt it.

  • STOLEN IPHONE - IS IT POSSIBLE TO FIND IT?

    Is it possible to find my stolen iPhone through the imie code? using iphone makes sense when you have an Apple ID. Is it possible to find my iPhone through IMEI if someone restored the pjone and connected it to a new Apple ID? That would mean that one IMEI is in two Apple Accounts. Is it possible to find out that?
    Second question - I didn't have Find My Phone software on the stolen iPhone, but installed it on another (old one i have) and it showed both iphones the old one i am using now and the stolen one. The fact that the stolen device appears in my account means that the phone has not been restored or it could have been restored and now works in another account?
    Thanks for information in advance.

    Dear AnaMusic,
    I read the infomration in the link you sent me, but there is no information about the option 'report a stolen device'. I can't see any option like that one. I can see only that I can look for it through 'Find My iPhone' application, which, I heard, is useless if the telephone has been restored.
    Where can I report a stolen iphone?
    regards,
    Martin

  • ITSM Search on status with "is not" gives incorrect results due to SLA statuses

    Hi,
    When executing a search on Solution Manager ITSM tickets, on the search criterion Status and with operator "is not", the result list does not give correct results.
    For example, an incident with status "Confirmed IRT Exceeded" does show up when searching with criterion "Status is not Confirmed".
    Is there any solution for this behaviour?
    Kind Regards,
    Joyca

    Hi Vivek,
    Thanks for the Knowledge Article.
    The content of the document would indeed help if we only wanted to find "not confirmed" tickets.
    However, the same thing is happening on other statuses. For example searching for "status is not proposed solution" is still not possible with the descriptions in the knowledge document, since the user status "proposed solution" is linked to system status "in process" (I1003), like all the other in-between user statuses such as "customer action" and "in process" etc.
    The only workaround that I see is to use only "is" as operator and never "is not". However, the underlying problem remains. I think it should be possible to use also "is not" without having issues due to those SLA statuses...
    Kr,
    Joyca

  • Using Brio with VB but without the Brio VB API

    Hi there. We're currently attempting to integrate our product (a website) with Brio. For the time being it's only being done for a demo to gauge whether are customers are interested in the functionality or not, so it may or may not actually happen for the version proper. Because of this our company is unwilling to invest in the API just yet, but still wants the work done (the usual developer's conundrum). I'd like to know is it possible to call into Brio, generate a report and embed the results on a webpage without using the VB API supplied by Hyperion? Does anyone know how to do this? It's being done for a demo, so efficiency and performance aren't yet relevant - just more or less a hacked version that can act as a proof of concept. I'm personally new to Brio, so I don't really know how to go about it. Do we need to get the VB API immediately, or can we wait 'til we know we need to write a version that we can sell.Basically, the task is to pass a customer ID into a .bqy file when the user selects an option from a dropdown, and display the results in a frame on the webpage.Any thoughts?

    This kind of questions are sometimes posted. To use GPIB from .NET managed environment, the easiet way is use VISA COM software. The VISA COM software is available on every PC which installs NI-VISA 3.0. I posted a C# example using VISA COM at the following post. Basically the approach is the same for VB.NET and VC++.NET.
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000047A30000&USEARCHCONTEXT_CATEGORY_0=_26_%24_13_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_26_%24_13_&UCATEGORY_S=0
    Makoto

  • Replacing A1175 battery with a RoHS disables the mousepad anyone know why?

    Replacing apple A1175 battery because it doesn't work for more than 5 mins fully charged with a RoHS disables the mousepad anyone know why?

    Is the battery one from Apple?  If not, it may be physically different and thus interfering with the trackpad.
    Ciao.

  • Is it possible to find a version of pages to install on 2007 mac mini running lion?

    Can't install the latest system on my mac mini, it's too old.
    Want to install pages to work with files a friend is sending me.
    The app store only shows the current version of pages which requires the current system.
    Is it possible to find an old version of pages to install to run on 10.7.5 ?
    or better yet on 10.6.8? (on which I'm stuck because quicken stuck there)
    Thank you.

    I cannot answer your Pages question, but...
    What type of file is your friend sending you?
    FYI: Quicken 2007 for Macs (Snow Leopard, Lion, Mt. Lion and Mavericks) is available for only $15 download directly from Intuit:
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    Also, if/when you upgrade, be sure to partition your hard drive or add an external drive and install Lion, Mt. Lion or Mavericks there!
    Keep your Snow Leopard partition and DO NOT install upgrade over it, as the upgrade will destroy the Snow Leopard environment.

Maybe you are looking for

  • [Amixer] Invalid Argument - Sound but not levels

    \o/ I recently bought a USB Headset. I'm using ALSA without Pulseaudio. The sound is working fine, but I have a problem setting levels etc. When I open amixer and the default card is set to the headset, the mixer fails to load with amixer: Mixer defa

  • How can I share cache files between users in a sandboxed Mac app?

    Our app downloads media files and stores them for use later. The size can be up to a few GB so it's considerable. Because this can be so large I want the cache to be shared across different users. My understanding of sandboxing is that you cannot wri

  • Outlook 07 synch to Palm Treo 650 Sync Conduit produces Contacts DUPLICATES in Outlook... Help!

    I downloaded the Sync Conduit from Palm, ran a synch from Treo 650 to Outlook 2007 (Vista 32) and it created duplicates for most of my CONTACTS in Outlook 07, not all but most, wierd. Treo 650 (Cingular)   -  ( Palm Desktop 6.2 )  -   Outlook 2007 (O

  • How to do data quality check on XI?

    Hi XI guru, I am working on a project, our architect want XI to perform some data quality check to make sure the message contains correct data in future processing. Is there any existing solution or walk arround for XI to perform the data quality che

  • Help with Basics PLZ!

    So i'm really bad with Photoshop. I was trying to edit my pic seeing tutorial and understand the step given in this image -- Plz If any one explain everything I need to do in it! How do i paste my image into the canvas? And how do i resize it?