Possible to set Dynamic Config from ABAP Proxy

Hi,
I know how to get and set Dynamic Config from Java/XSLT mappings and adapter modules. But I want to do this from an outbound ABAP Proxy Call (in the same way I can set the serialization context for EOIO), is that possible?
The scenario is: I have an interface; Proxy -> Xi -> ftp, with no mapping. It seems unnecessary to introduce a mapping just to set some dynamic config values for the receiving adapter which are already known at the outbound proxy call...
rgds Johan

Hi Bhavesh,
In the thread you mention it is shown that you can set Dynamic Config properties during an ABAP mapping. My question was if I can set these properties already in the proxy call? Or did I miss something?
Of-course I can introduce a dummy mapping in Java/XSLT/ABAP which copies the source message to the result message and sets the dynamic config properties, but I would rather not introduce a mapping if not neccessary...
rgds Johan

Similar Messages

Is it possible to call web service from ABAP SAP 4.6 c..If yes how

Hi Friends,
Is it possible to call web service from ABAP-SAP 4.6 c..If yes Could you please let me know how.
Thanks in Advance.
Murali Krishna K
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:09 PM
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:11 PM

Olivier CHRETIEN wrote:>
> Hi Terry,
>
> So these function modules must use the SAPHTTPA RFC destination which uses the exe saphttp.exe ?
>
> How much abap code lines do you have for a web service call ?
> Do you have to code the call specifically for each different web service ?
> Are you able to use the WSDL ?
>
> Nice job if you have coded your own private SOAP runtime !
>
> But I don't think this is an easy solution for everybody...
>
> Regards,
>
> Olivier
Yes, SAPHTTPA (runs on application server) and/or SAPHTTP (runs on front-end pc), one of which, is required for HTTP communication. So far, nothing too elaborate as far as SOAP goes, but the logic is simplistic. Here's some sample code:
DEST = 'SAPHTTPA'.
TRANSLATE HOST TO LOWER CASE.
MYURL = 'wssrvTest/Service.asmx/GetByOrderItem'.
CONCATENATE HOST MYURL INTO MYURL.
REQUEST_HEADERS-DATA =
 'Content-type: application/x-www-form-urlencoded'.
APPEND REQUEST_HEADERS.
CLEAR REQUEST_HEADERS.
*........Convert Order Number to External Format........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 INPUT = ORDER
 IMPORTING
 OUTPUT = ORDER.
*........Convert Item Number to External Format.........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 INPUT = ITEM
 IMPORTING
 OUTPUT = ITEM.
*........Convert Material Number to External Format.....................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
 EXPORTING
 INPUT = MATERIAL
 IMPORTING
 OUTPUT = MATERIAL.
CONCATENATE 'sOrder=' ORDER
 INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sItem=' ITEM
 INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sMaterial=' MATERIAL
 INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CALL FUNCTION 'HTTP_POST'
 EXPORTING
 ABSOLUTE_URI = MYURL
 RFC_DESTINATION = DEST
 BLANKSTOCRLF = 'X'
 TABLES
 RESPONSE_ENTITY_BODY = RESPONSE_BODY
 REQUEST_ENTITY_BODY = REQUEST_BODY
 RESPONSE_HEADERS = RESPONSE_HEADERS
 REQUEST_HEADERS = REQUEST_HEADERS
 EXCEPTIONS
 CONNECT_FAILED = 1
 TIMEOUT = 2
 INTERNAL_ERROR = 3
 TCPIP_ERROR = 4
 DATA_ERROR = 5
 SYSTEM_FAILURE = 6
 COMMUNICATION_FAILURE = 7
 OTHERS = 8.
CHECK SY-SUBRC = 0. "more appropriate msg goes here
LOOP AT RESPONSE_BODY.
 IF RESPONSE_BODY+0(7) <> '<string' AND
 RESPONSE_BODY+0(8) <> '</string' AND
 RESPONSE_BODY+0(5) <> '<?xml'.
 SPLIT RESPONSE_BODY-DATA AT '=' INTO FIELD_NAME FIELD_VALUE.
 TRANSLATE FIELD_NAME TO UPPER CASE.
 CASE FIELD_NAME.
 WHEN 'HEIGHT'.
 HEIGHT = FIELD_VALUE.
 WHEN 'WIDTH'.
 WIDTH = FIELD_VALUE.
 WHEN 'LENGTH'.
 LENGTH = FIELD_VALUE.
 WHEN 'WEIGHT'.
 WEIGHT = FIELD_VALUE.
 WHEN 'QTY'.
 QTY = FIELD_VALUE.
 ENDCASE.
 ENDIF.
ENDLOOP.
Hope this helps...
Terry
Edited by: Terry West on Feb 4, 2008 3:08 PM

Is it possible to set table-variant from one user to another one?

Is it possible to set table-variants from a t-code like fb60 from one user to another one?
I mean that both user have the same table-variants.

You mean screen variant, where you will need to anter the GL line items in FB50?
then you can set your desired variant as DEFAULT for all users, when it is configured.
Else thru SU10, for all of your users, add parameter ID SCRVAR and give your parameter value (screen variant name) and SAVE.

Data passed from ABAP proxy not reaching PI...

Hi,
My scenario is
ECC ABAP Proxy --> PI --> legacy
In dev box, it is working fine, when data is sent from ECC dev, it reaches PI dev.
But when data is sent from ECC quality, data is not reaching PI quality.
This set up has already been in production and working fine.
I have done some minor mapping changes only in ESR and moved to PI quality. Nothing changed in the Integration builder side.
But a client copy was done from ECC prod to ECC quality (not PI systems). Will this have any impact on proxy ?
What can I check to make sure everything is in place ?
Pl advise.
thnks

Hi,
In SLDAPICUST the SLD server host and port will be maintained. The ECC will use this to connec to SLD at runtime and get the business sytem details. This can be checked via transaction SLDCHECK.
Also what the transaction SPROXY says in the ECC system. Is it connecting your PI system and loading the ESR information?
There are a few more configuration that needs to be checked in ECC system for proxy communication, I think this blog can help you.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
regards,
francis

Tags dont appear in XI from ABAP Proxy!!

Hi,
I have an interface which receives the data from SAP to XI via ABAP proxy. There are some fields in the structure which are mandatory in XI and the values are not been passed from SAP. As a result, the tags dont appear when the message enter XI and this results in the message mapping failure.
As a workaround, we are checking for the existence of this field in the incoming message and assigning some constant value to it.
But is this, the only option? do we have any better approaches to tackle this?
Thanks for all your inputs,
Regards,
Vinayak Kamath

Hi Vinayak,
There are some fields in the structure which are mandatory in XI
In XI, we make the fields mandatory based on the requirement and business rules of the sender side. If u r making it mandatory, that means the sender has requested u to do so. This implies that the sender should send the data according to the specifications it has provided to XI implementer.
So either request the sender to send data according to its specification or change the structure in XI.
If u couldnt do either, handling it in message mapping is good enough.

do we have any better approaches to tackle this?
U may also configure alerts for the same
[Reward if helpful]
Regards,
Prateek

How to extract attachment from ABAP proxy and store in archive link....

Hi Experts,
I need to consume an incoming email attachment in the ABAP Proxy program (POP Mail --> PI --> ABAP Proxy) and then store this file in the IBM content management server through the Archvie Link connection.
Any idea how to implement this piece of code in ABAP?
Regards,
Shobhit

Hi Shobhit
You can get the files from Sender Mail adapter. In proxy implement the method of protocol IF_WSPROTOCOL_ATTACHMENTS as said above.
Archive Link supports HTTP, RFC etc depends on the system you are going to use for archiving. For your case you have IBM server i think you have to do HTTP synchronous. This will be like an interface again for you.
Why are you using ERP system in middle. I think you can directly dump data to IBM server.
Thanks
Gaurav

Web Service to ABAP Proxy, Calling RFC from ABAP Proxy

can any body send me the notes or Step by step process of Webserice of calling RFC using ABAP proxy, I am new to XI. send me detail process of this perticular scenarios

Hope this helps
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
also refer to
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Rgds,
Kumar
Message was edited by:
Kumar

How to set ref_to_message_id in the abap proxy

Hi,
Does anyone have idea, how to set ref_to_message_id of a client proxy in the server proxy? My problem is, I send a message to a server proxy. The server proxy receives the message, retrieves the message id and tries to set the ref_to_message_id of the message, which will be sent to a client proxy, with its message id. Can anyone help?
regard
hu

hi Bin,
plz check this link it will be useful
Re: Importance of Message ID in soap adapter
How to retrieve file size and XI message ID?
/people/michal.krawczyk2/blog/2005/02/25/simple-java-code-in-graphical-mapping--xi
regards
sasi
Reward if useful

Is it possible to set init-parameter from the servlet

I want to set the value to the perticular servlet?
is it possible to set using programming(servlet) instead of specifying in the web.xml file

Couldnt get ur question buddy :(

Accessing Adapter Specific Attributes from ABAP proxy

Hi,
Now i have a scenario from where i take a file from FTP and send it to ERP by proxy. While taking the file i am taking also the file name by setting adapter-specefic message attributes -> File Name. So the file name appears inside the SOAP Header. Now how i am going to use the file name in my ABAP code on the SAP side.
Thanks.
Arman

Hi Arman,
Follow this link:
The specified item was not found.
Your case is very similar to that one. Extract file Name from SOAP Header and then map it into any
field of your proxy.
Carlos

Message Send from ABAP Proxy implemented in XI Server ABAP Stack

Hello everyone,
I have a question and I'm not sure of this is an ABAP question but I'll try here and try to find some information on ABAP forums and weblogs, I need to send a XML message to the XI pipeline from an ABAP Server Proxy implemented in the same XI ABAP Stack Server, why I need this? well actually I can't find a way to do it in a BPM so I'm going to try to set the logic for this message send in the ABAP Stack, so do you know like a Function Module so I can send a message to the pipeline but I need the message to be set as Scheduled, I'll try ABAP Forums and Weblogs too, thanks in advance.
regards,
julio

Hi
You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
Thanks
Gaurav

Is it possible to call COM objects from ABAP?

Hi guys, is it possible?
Can you also provide me a little sample code?
Thanx a lot!
Peter

I think OLE is possible through ABAP
as in
INCLUDE OLE2INCL.
DATA EXCEL TYPE OLE2_OBJECT.
CREATE OBJECT EXCEL 'Excel.Application'.
FREE OBJECT EXCEL.
i dnt know much about COM ..
there maybe somthing similar to this
hope this helps
Award forum points to helpful answers

Access/set dynamic configuration in client/server abap proxy

Hi,
I have 2 question regarding reading/setting dynamic configuration in ABAP proxies:
1) Is it possible to set dynamic configuration objects in a server abap proxy (SAP --> XI)?
When looking at the class CL_PROXY_FRAMEWORK is looks as if it is possible. This class has en attribute IF_XMS_MAIN~DY which is a reference to the class CL_XMS_MSGHDR30_DYNAMIC.
I'm not sure if I'm supposed to try and access the dynamic configuration objects via this class or if I'm supposed to use the GET_PROTOCOL method in some manner as suggested by:
http://help.sap.com/saphelp_nw04s/helpdata/en/51/d5cd16235e4643ae8ec92395c4ad97/frameset.htm
Above link is for client proxies not server, and I've been unable to find any documentation on this for server proxies.
2) The same question goes for server proxies (XI --> SAP), though now I would like to set some dynamic configuration data.
This I believe should be done using get_protocol( if_wsprotocol=>ws_header ) as indicated by before mentioned link.
However in both cases I'm not sure of if it is indeed possible and which road to choose for sure. So a hint or 2 would be really nice.
Best Regards,
Daniel
ps. maybe I should just mention that I am pretty new to the ABAP world, so bear with me.

The link that you gave does give you an example for both server and client proxies:
Accessing Protocol Classes for Client Proxies
In client proxies, you access the protocol class by using the GET_PROTOCOL method. Below is an example for the IF_WSPROTOCOL_PAYLOAD protocol:
DATA:
lo_clientProxy      TYPE REF TO co_clientProxy,
lo_payload_protocol TYPE REF TO if_wsprotocol_payload
lo_payload          TYPE REF TO if_ws_payload.
CREATE OBJECT lo_clientProxy.
Get Protocol Class Using Method GET_PROTOCOL
lo_payload_protocol ?=
       lo_clientProxy->get_protocol( if_wsprotocol=>payload ).
CALL METHOD lo_clientProxy->execute_synchronous
            EXPORTING output = ls_request
            IMPORTING input   = ls_response.
Use Protocol Methods
lo_payload = lo_payload->get_sent_request_payload( ).
Accessing Protocol Classes for Server Proxies (XI Only)
Within the implementation of a server proxy, you get the protocol class by using the CL_PROXY_ACCESS=>GET_SERVER_CONTEXT( ) method:
DATA: lo_server_context   TYPE REF TO if_ws_server_context,
       lo_payload_protocol TYPE REF TO if_wsprotocol_payload.
lo_server_context   = cl_proxy_access=>get_server_context( ).
lo_payload_protocol =
     lo_server_context->get_protocol( if_wsprotocol=>payload ).

Use dynamic configurations inside an abap proxy

Hi,
is it possible to set dynamic configurations inside an abap proxy?
Inside an abap-mapping I can use "CALL METHOD DYNAMIC_CONFIGURATION->SET_RECORD".
What's up with an abap proxy?
Regards
Wolfgang Hummel

Hi,
Not Possible.
Thanks!

Abap proxy call : synchronous / background ?

Hi,
I use currently abap proxy call to send data from ECC to XI, and it works fine ! But... I would like to know two points :
1. Is it possible to execute SYNCHRONOUSLY this call abap proxy and not only in asynchronous...
2. Is it possible to execute in BACKGROUND this call abap proxy, because it seems it use a dialog process, even if the call is inside an abap program executed in background
I will appreciate your feedbacks on these both points ?
Regards.
Mickael

Hi,
Yes, we can do Sysnchronous call in Proxy.
and we can do the Background job schedule also in Proxy .
Reffer this help file
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Reffer this BLOG also
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 12, 2008 11:19 AM

Possible to set Dynamic Config from ABAP Proxy

Similar Messages

Maybe you are looking for