Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27   18:38:25:627   868   ba4   AU   ## START ## AU: Search for updates
2013-03-27   18:38:25:627   868   ba4   AU   #########
2013-03-27   18:38:25:627   868   ba4   AU   <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:25:627   868   934   Agent   *************
2013-03-27   18:38:25:627   868   934   Agent   ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:25:627   868   934   Agent   *********
2013-03-27   18:38:25:627   868   934   Agent      * Online = Yes; Ignore download priority = No
2013-03-27   18:38:25:627   868   934   Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27   18:38:25:627   868   934   Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27   18:38:25:627   868   934   Agent      * Search Scope = {Machine & All Users}
2013-03-27   18:38:25:627   868   934   Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27   18:38:25:627   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27   18:38:25:627   868   934   EP   Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27   18:38:25:627   868   934   Setup   Checking for agent SelfUpdate
2013-03-27   18:38:25:627   868   934   Setup   Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27   18:38:25:799   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27   18:38:25:799   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:25:815   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:25:815   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:26:002   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Setup   Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27   18:38:26:002   868   934   Setup   SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27   18:38:26:440   868   934   PT   +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27   18:38:26:440   868   934   PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27   18:38:28:846   868   934   WS   WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27   18:38:28:846   868   934   WS   WARNING: Original error code: 0x80072efe
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error receiving the HTTP reply.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the remote endpoint was terminated.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the server was terminated abnormally
2013-03-27   18:38:28:846   868   934   WS   WARNING: Web service call failed with hr = 80240440.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Current service auth scheme='None'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27   18:38:28:846   868   934   WS   FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: PTError: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: Sync of Updates: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27   18:38:28:846   868   934   Agent      * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent      * WARNING: Exit code = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent   *********
2013-03-27   18:38:28:862   868   934   Agent   ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:28:862   868   934   Agent   *************
2013-03-27   18:38:28:862   868   934   Agent   WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27   18:38:28:862   868   598   AU   >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Search callback failed, result = 0x80240440
2013-03-27   18:38:28:862   868   598   AU   #########
2013-03-27   18:38:28:862   868   598   AU   ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU   #############
2013-03-27   18:38:28:862   868   598   AU   All AU searches complete.
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Failed to find updates with error code 80240440
2013-03-27   18:38:28:862   868   598   AU   AU setting next detection timeout to 2013-03-27 12:38:28
Ricky

some more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky

Similar Messages

Error when using Variable Transport Binding in Sender Mail Adapter

Hi,
I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
Any ideas why this is happening?
Thanks,
Brad

Hi Luciana,
Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
Good luck!
Cheers,
Brad

Windows Update Errors

Good Evening I constantly keep getting Windows update errors when trying to update the OS. I have tried allsorts from the windows update fixer to clearing out the Windows Update cache yet to no joy. Im starting to think that ive got possibly corrupt files somewhere...? A screenshot is below.. I have also used the Windows Resource Protection but it was unable to fix issues it found. Pic below.. PLease help!

Hi lincro40,
The main issue is that the windows update will work incorrectly ,right ?If it is possible ,please share us the error code you have got ?
We can take the following step to have a troubleshoot .
If there is any antivirus software installed ,please turn them off temporarily to have a check:
1.Run the built-in troubleshoot tool to have a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows Update.
2.Clear the windows update cache.
net stop wuauserv
cd %systemroot%\SoftwareDistribution
ren Download Download.old
net start wuauserv
Restart the machine and manually check for updates again
3.Try the fixit tool to reset Windows update Components as S.Sengupta posted.
How do I reset Windows Update components?
https://support.microsoft.com/en-us/kb/971058
If the issue persists ,please check the Event Viewer (Event Viewer \Windows Logs \Application ,System ,Setup )and the "Windowsupdate.log" (Search it directly) for more information to troubleshoot this issue .If you have troubles in analyzing this
issue ,we can upload them to the OneDrive and paste the link here
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows update error 800f0246 when installing printer driver

I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?

No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

-t2cGetCharSet error when using thick client with 1.0.0.15.57

I think I have found a bug in 1.0.0.15 related to accessing a database using the thick client. I have tested this with 1.0.0.14 release of SQLDeveloper and that version DOES work OK.
Simply put, I try connecting to a database using the 10g Client on Windows XP and I get "Failure: -t2cGetCharSet" error when running 1.0.0.15.57. I must use 10g thick client so that I can use encyption between the client and the database. 9i thick client doesn't work between Windows and Linux when using encryption. Also, instant client isn't an option; it doesn't support Advanced Security Option (encryption).
I DID test without encryption enabled to eliminate that as a possible cause and the results were the same.
If need be, I could back down to 1.0.0.14, but I would prefer not to.

See:
Re: TNS Connection Issues
Raptor does not find My tnsnames
If don't to solve your problem, let us to know.

Windows update error Code 80072EF3

Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

Hi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Burning error when using toast

i am using leopard 10.5.5 and using toast 9.0.2 with the hd plugin.
i am getting an error when trying to burn a dvd, i have created a file in an animation program, taken it into final cut pro, edited what i wanted, then exported it as 1080i50. the file plays no problem in quicktime on my laptop, but i need to put it on DVD. opening up toast, it goes into the prog window, encodes the file but then i get an error, -50, can not burn DVD.
does anyone know of this problem, or maybe has any ideas on what i can do to work out the problem?
cheers
bret

Bruce Etnyre wrote:
His first sentence states the OP is using 10.5.5 and apparently has not updated the profile.
sure confused me
I occasionally get errors when using Toast to burn DVD’s. I found quitting other applications during the burn eliminated the errors. Not the optimal solution, but it couldn’t hurt to try.
I think he is referring to HD DVDs per his first sentence, but it's not clear to me.
It could be anything from a bad blank to a flaky optical writer to, as you mention, other software running. I usually turn all my apps off when burning DVDs. Mail, Safari, Firefix, etc., although on fast machine like this one it probably does not matter.
On the other hand, when I burn a R/W DVD or CD, I ignore these things and just computer as usual.

Windows Update error code 8024402C

I've been having this problem for months and I can't make any updates so please solve my problem, I went to your website about that problem and it still doesn't solve my problem, I would really appreciate if you could solve it thank you in advance.
PS: I'm using window 7 64bit if that can help.

Hi,
About Windows Update error
8024402C, please refer this article from Microsoft:
http://windows.microsoft.com/en-US/windows7/Windows-Update-error-8024402C
If it doesn’t help, please temporally disable firewall and antivirus program and update again.
If the issue persists, you can try to reset Windows Update components for test:
http://support.microsoft.com/kb/971058
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows update error code 80246002

I have 4 PCs running Windows 7 (both 64 and 32 bit) and found that after the last update on Wednesday morning, all 4 are now getting a code 80246002 when I did a check for updates today. I tried uninstalling the latest updates and this did not help. On 2
of the PCs, I did a restore to a week ago (when I know that there had been at least two successful checks for updates and this did not resolve the problem. I have seen a lot of posts implying that this is related to KB 2982791 and KB 2993651 but uninstalling
these didn’t resolve the issue.
Any suggestions on how to resolve this?
Mize Johnson

Hi,
If you receive Windows Update error 80246002 while checking for updates, it means that files required by Windows Update might be damaged. This often can be corrected by renaming the Windows Update download folder, and then running Windows Update again.
Try to run the following commands:
1. Type net stop wuauserv. Hit Enter.
2. Type: ren c:\windows\SoftwareDistribution softwaredistribution.old.
Hit Enter.
3. Type: net start wuauserv. Hit Enter.
4. Type: exit and hit Enter.
If it doesn't resolve the issue, run this "Fix It" tool below:
Troubleshoot problems with installing updates
http://windows.microsoft.com/en-in/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Karen Hu
TechNet Community Support

Windows update error code 80072EFD and 80244018

An error occured while checking for new updates from my laptop
WindowsUpdate_80072EFD" "WindowsUpdate_dt000
WindowsUpdate_80244018" "WindowsUpdate_dt000
Help me with this error. i try to solve by using Microsoft TechNet but still cannot solve the problem, Also i try all the link that appear still cannot solve. Help me please..

Hi,
Have you tried this link?
Windows Update error 80072efd
http://windows.microsoft.com/en-in/windows/windows-update-error-80072efd#1TC=windows-7
And for error 80244018, in addition to solutions mentioned in the first reply, you can also try this, in start button, type "services.msc", enter, locate "Background intelligent Transfer Services" and "Windows Update", stop these two services, then
clear C:\Windows\SoftwareDistribution folder, restart the two services.
Regards
Yolanda Zhu
TechNet Community Support

Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

Similar Messages

Maybe you are looking for