Possibly unique interference issue. Is TC the answer?
I'm sure there are some similar topics on this forum, but I feel I may have a slightly unique issue...
Let me start by saying I'm currently using an Airport Express, MacBook Pro 3.1, iPhone 4 and the new AppleTV. I, like many others, am having trouble with radio frequency interference. At night, I have a great wifi connection...during the day, however, I have no wifi and my Airport doesn't even show up in Airport Utility.
I'm pretty sure I've pinpointed my problem. My apartment is directly above a hobby store that specializes in radio controlled toy planes, trains and automobiles. Radio frequency overload.
I've moved my Airport around, messed around with different channels in Airport Utility and turned on interference robustness...still nothing.
I realize I may be utterly screwed, which bums me out because I'd absolutely LOVE to use my AppleTV during the day, especially for music, but I remain hopeful. The question is: does Time Capsule have a much stronger signal? Should I ditch my Express for that, or are there more things I could try?
PS: I don't want to layer my floor with aluminum foil!
The strength of the Time Capsule signal would be the same as the AirPort Express, but it would have the advantage of using both normal 2.4 GHz wireless and 5 GHz wireless.
There are very few wireless networks using the 5 GHz band, so that might be a possibility for you to consider. Newer computers would connect at 5 GHz, but the iPhone would not, so you would have to use the normal 2.4 GHz network for those connections.
If you have a newer "n" AirPort Express that supports 5 GHz, you could try that as an experiment to see if it helps...and also check to see how many of your other devices can connect at 5 GHz.
AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Change the Radio Mode to 802.11n only 5 GHz
Update to save settings
You can always return to the previous setting by going back in.
Similar Messages
-
The Table Issue - is this the answer?
It'll take a while to get universal but...
Everything you know about CSS is wring:
http://www.digital-web.com/articles/everything_you_know_about_CSS_Is_wrong
And here's a discussion group on that:
http://www.reddit.com/r/programming/comments/78mha/everything_you_know_about_css_is_wrong
Cheers....
JJYou mean the genuinely horrible markup used on that page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"babarabatibiri" <[email protected]> wrote in message
news:gdpqpg$lno$[email protected]..
>
> "Jay Jhabrix" <[email protected]> wrote in message
> news:gdnopg$p0f$[email protected]..
>> It'll take a while to get universal but...
>>
>> Everything you know about CSS is wring:
>>
http://www.digital-web.com/articles/everything_you_know_about_CSS_Is_wrong
>>
>> And here's a discussion group on that:
>>
http://www.reddit.com/r/programming/comments/78mha/everything_you_know_about_css_is_wrong
>>
>> Cheers....
>>
>> JJ
>>
>
> A nice little joke (for those smart/knowlegeable enough
to look at the
> source code and see the irony):
>
>
http://www.freedomscientific.com/fs_products/software_jaws.asp
>
>
> : -) -
Vista & other MS HTML Issues==Anyone know the answer?
I am getting more and more email that looks like pure HTML code. When I look through the code, it usually has some reference to Microsoft Office 11, or Vista.
It looks like this:
{\rtf1\ansi\ansicpg1252\fromhtml1 \deff0{\fonttbl
{\f0\fswiss\fcharset0 Arial;}
{\f1\fmodern Courier New;}
{\f2\fnil\fcharset2 Symbol;}
{\f3\fmodern\fcharset0 Courier New;}
{\f4\fswiss\fcharset0 Arial;}
{\f5\fswiss Tahoma;}
{\f6\fswiss\fcharset0 Helvetica;}}
{\colortbl\red0\green0\blue0;\red0\green0\blue255;\red0\green0\blue255;\red0\gre en0\blue0;}
\uc1\pard\plain\deftab360 \f0\fs24
{\*\htmltag243 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">}
{\*\htmltag3 \par }
{\*\htmltag19 <HTML>}
{\*\htmltag34 <HEAD>}
Is there any solution to read these messages that are obviously from a Microsoft client?
Is there anything I can tell the MS user? Like a setting that will shut off the offending HTML?
ThanksRon,
You said in your original post:
Is there anything I can tell the MS user? Like a setting that will shut off the offending HTML?
That's what Allen gave you. Seems odd to get mad when presented with an answer, especially when you already opened the door to telling the MS users some way to correct it on their end.
Are you using Apple Mail when trying to view these emails? -
i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode
To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again. -
How to tune the SQL & solve UNIQUE Contraint issue using without duplicates
CREATE TABLE REL_ENT_REF
ROLL_ENT VARCHAR2(4 BYTE) NOT NULL,
ROLL_SUB_ENT VARCHAR2(3 BYTE) NOT NULL,
ROLL_ENT_DESCR VARCHAR2(50 BYTE),
ENT VARCHAR2(4 BYTE) NOT NULL,
SUB_ENT VARCHAR2(3 BYTE) NOT NULL,
ENT_DESCR VARCHAR2(50 BYTE)
CREATE UNIQUE INDEX REL_ENT_REF_IDX_PK ON REL_ENT_REF
(ROLL_ENT, ROLL_SUB_ENT, ENT, SUB_ENT);
ALTER TABLE REL_ENT_REF ADD (
CONSTRAINT REL_ENT_REF_IDX_PK
PRIMARY KEY
(ROLL_ENT, ROLL_SUB_ENT, ENT, SUB_ENT);
TOTAL NUMBER OF RECORDS FOR TABLE REL_ENT_REF : 123542
CREATE TABLE REL_COA_REF
ACCT VARCHAR2(9 BYTE) NOT NULL,
ACCT_LVL VARCHAR2(2 BYTE) NOT NULL,
ACCT_ID VARCHAR2(9 BYTE) NOT NULL,
REL_TYPE VARCHAR2(10 BYTE) NOT NULL,
ACCT_TYPE VARCHAR2(2 BYTE) NOT NULL,
ACCT_DESCR VARCHAR2(43 BYTE),
POST_ACCT VARCHAR2(9 BYTE) NOT NULL,
POST_ACCT_TYPE VARCHAR2(2 BYTE),
POST_ACCT_DESCR VARCHAR2(43 BYTE),
SIGN_REVRSL NUMBER
CREATE INDEX REL_COA_REF_IDX_01 ON REL_COA_REF
(ACCT_ID, REL_TYPE, POST_ACCT);
CREATE UNIQUE INDEX REL_COA_REF_IDX_PK ON REL_COA_REF
(ACCT_ID, ACCT, REL_TYPE, POST_ACCT);
TOTAL NUMBER OF RECORDS FOR TABLE REL_COA_REF : 4721918
CREATE TABLE REL_CTR_HIER_REF
ENT VARCHAR2(4 BYTE) NOT NULL,
SUB_ENT VARCHAR2(3 BYTE) NOT NULL,
HIER_TBL_NUM VARCHAR2(3 BYTE) NOT NULL,
HIER_ROLL VARCHAR2(14 BYTE) NOT NULL,
HIER_CODE VARCHAR2(14 BYTE) NOT NULL,
SUM_FLAG VARCHAR2(14 BYTE) NOT NULL,
CTR_OR_HIER VARCHAR2(14 BYTE) NOT NULL,
CTR_DETAIL VARCHAR2(14 BYTE) NOT NULL,
CTR_DESCR VARCHAR2(50 BYTE)
CREATE INDEX REL_CTR_HIER_REF_IDX_01 ON REL_CTR_HIER_REF
(HIER_TBL_NUM, HIER_ROLL, SUM_FLAG);
CREATE UNIQUE INDEX REL_CTR_HIER_REF_IDX_PK ON REL_CTR_HIER_REF
(ENT, SUB_ENT, HIER_TBL_NUM, HIER_ROLL, SUM_FLAG,
CTR_DETAIL, CTR_OR_HIER, HIER_CODE);
CREATE INDEX REL_CTR_HIER_REF_IDX_02 ON REL_CTR_HIER_REF
(ENT, SUB_ENT, HIER_TBL_NUM, CTR_OR_HIER, SUM_FLAG,
CTR_DETAIL);
TOTAL NUMBER OF RECORDS FOR TABLE REL_CTR_HIER_REF : 24151811
CREATE TABLE REL_TXN_ACT_CM
ENT VARCHAR2(4 BYTE),
SUB_ENT VARCHAR2(3 BYTE),
POST_ACCT VARCHAR2(9 BYTE),
CTR VARCHAR2(7 BYTE),
POST_DATE DATE,
EFF_DATE DATE,
TXN_CODE VARCHAR2(2 BYTE),
TXN_TYPE VARCHAR2(1 BYTE),
TXN_AMOUNT NUMBER(17,2),
TXN_DESCR VARCHAR2(46 BYTE),
TXN_SOURCE VARCHAR2(1 BYTE)
CREATE INDEX REL_TXN_ACT_CM_IDX_01 ON REL_TXN_ACT_CM
(ENT, SUB_ENT, POST_ACCT, POST_DATE, EFF_DATE,
TXN_AMOUNT);
CREATE INDEX REL_TXN_ACT_CM_IDX_PK ON REL_TXN_ACT_CM
(ENT, SUB_ENT, CTR, POST_ACCT, POST_DATE,
EFF_DATE, TXN_AMOUNT);
TOTAL NUMBER OF RECORDS FOR TABLE REL_TXN_ACT_CM : 111042301
CREATE TABLE REL_CLPR_TBOX_GL_TXN
ORGANIZATION VARCHAR2(10 BYTE) NOT NULL,
ACCOUNT VARCHAR2(10 BYTE) NOT NULL,
APPLICATION VARCHAR2(10 BYTE) NOT NULL,
AMOUNT NUMBER(17,2) NOT NULL
CREATE UNIQUE INDEX REL_CLPR_TBOX_GL_TXN_IDX ON REL_CLPR_TBOX_GL_TXN
(ORGANIZATION, ACCOUNT, APPLICATION);
DELETE FROM REL_CLPR_TBOX_GL_TXN;
INSERT INTO REL_CLPR_TBOX_GL_TXN
ORGANIZATION,
ACCOUNT,
APPLICATION,
AMOUNT
SELECT --+ INDEX(T REL_TXN_ACT_CM_IDX_PK)
SUBSTR(REL_CTR_HIER_REF.HIER_CODE, 1, 5) || '.....',
TXN.POST_ACCT,
'GL-' || SUBSTR(TXN.TXN_DESCR, 1, 3),
SUM
CASE
WHEN TXN.TXN_CODE IN ('01', '21') THEN 1
WHEN TXN.TXN_CODE IN ('02', '22') THEN -1
ELSE 0
END
CASE
WHEN REL_COA_REF.ACCT_TYPE IN ('01', '25', '30', '40', '90', '95') THEN 1
WHEN REL_COA_REF.ACCT_TYPE IN ('05', '10', '20', '35') THEN -1
ELSE 0
END
REL_COA_REF.SIGN_REVRSL
TXN.TXN_AMOUNT
FROM
REL_TXN_ACT_CM REL_TXN
INNER JOIN
REL_CTR_HIER_REF
ON
REL_TXN.ENT = REL_CTR_HIER_REF.ENT AND
REL_TXN.SUB_ENT = REL_CTR_HIER_REF.SUB_ENT AND
REL_TXN.CTR = REL_CTR_HIER_REF.CTR_DETAIL
INNER JOIN
REL_COA_REF
ON REL_TXN.POST_ACCT = REL_COA_REF.POST_ACCT
INNER JOIN
REL_ENT_REF
ON
REL_CTR_HIER_REF.ENT = REL_ENT_REF.ENT AND
REL_CTR_HIER_REF.SUB_ENT = REL_ENT_REF.SUB_ENT
WHERE
REL_TXN.EFF_DATE BETWEEN L_MONTH AND LAST_DAY(L_MONTH) AND
REL_CTR_HIER_REF.HIER_TBL_NUM = '001' AND
REL_CTR_HIER_REF.SUM_FLAG = 'D' AND
REL_CTR_HIER_REF.CTR_OR_HIER = REL_CTR_HIER_REF.CTR_DETAIL AND
REL_CTR_HIER_REF.HIER_CODE BETWEEN 'AAA' AND 'ZZZ' AND
REL_COA_REF.REL_TYPE = ' ' AND
REL_COA_REF.ACCT_ID = 'ALPTER' AND
REL_COA_REF.ACCT_LVL = '9' AND
REL_ENT_REF.ROLL_ENT = '999' AND
REL_ENT_REF.ROLL_SUB_ENT = '111'
GROUP BY
SUBSTR(REL_CTR_HIER_REF.HIER_CODE, 1, 5),
REL_TXN.POST_ACCT,
SUBSTR(REL_TXN.TXN_DESCR, 1, 3)
HAVING
SUM
CASE
WHEN REL_TXN.TXN_CODE IN ('01', '21') THEN 1
WHEN REL_TXN.TXN_CODE IN ('02', '22') THEN -1
ELSE 0
END
CASE
WHEN REL_COA_REF.ACCT_TYPE IN ('01', '25', '30', '40', '90', '95') THEN 1
WHEN REL_COA_REF.ACCT_TYPE IN ('05', '10', '20', '35') THEN -1
ELSE 0
END
REL_COA_REF.SIGN_REVRSL
REL_TXN.TXN_AMOUNT
) <> 0;
[\CODE]
While try to run the query(only select statement), it is taking around 3+ hours & while try to insert the same query in the table, getting error called ORA-00001: unique constraint (INSIGHT.CLPR_TBOX_GL_TXN_IDX) violated.
[\CODE]
How to tune & resolve this UNIQUE Contraint issue using without duplicates?Should the SELECT statement be returning duplicate rows? If you know that there are duplicate rows in the underlying tables, you could add a DISTINCT to the select. Which forces Oracle to do an extra sort which will slow down the insert. If you don't expect duplicate rows, you would need to figure out what join criteria is missing from your query and add that criteria.
Justin -
Hi. Possible fix done to my late- 2009 iMac's screen/graphics issue that may work God willing, hopefully for most [In my case it sometimes had that yellow circle that appears before it goes to the Finder but mostly it was a messed up desktop and menus (unreadable mostly) after months, prayers and weeks of fixing it; recommended to be read entirely first coz' it's a bit complicated (like a lot of subplots). If uncomfortable to try coz' it involved a GPU stress test, contact your authorized Apple service center for their advice]. I had an iMac (late 2009) screen garbling a few hours ago (was weeks ago when it resurfaced until it got worse that it's at every boot on Mavericks):
† I booted to Snow Leopard USB external (my back-up OS) drive then run the first person shooter at redeclipse.net. I set everything to max, including the display, resolution and graphics setting with fullscreen and v-sync on. I then refreshed it which brought it back to normal (I then tested it's stability with GPUTest 0.7 with Furmark for 15 minutes). * if the display options have been set to max before, bring it back to the default then refresh and then max it again Possibly any games that's has the graphic settings (or more advanced) of Red Eclipse could work (other free ones are Xonotic and Open Arena which are based on Quake 1 or 3s engine I believe).
Optional but not recommended (have warrantied if that's still available or have it repaired at authorized service centers):
If that doesn't work, review articles and videos on how to open an Intel iMac and get an iPhone/iPad/another way to get to the 'net ready for research (I opened mine very carefully on the right side with a cutter with blade extended far prying it carefully then I inserted a flat end, sturdy plastic used for mixing epoxy then removed the cutter carefully to let the plastic mixing tool do the prying) to see if the cable connected to the logicboard which is on top of, is connected (mine was detached but I'm not sure if the adjusting and tilting of the screen overtime for 2 & 1/2 years, detached it) then do † above again.
It could to be a software problem, a possible Apple ATI driver bug that takes overtime to surface (2 1/2 years it resurfaced because this started in my case after upgrading to Lion when Apple coded things mostly from the ground up. Snow Leopard didn't have this problem).
Thank you for your time. Have a great upcoming sunday mass/great upcoming weekend. I hope this helps.
God bless, Rev. 21:4, Matt. 16:18Does an external display also act in a similar manner as the internal one?
Some earlier Intel-based iMacs had graphic processor card issues; not sure what
the symptoms of the majority of them were, but some had odd patterns, others
went black, and some would range from OK to totally unusable. Among others.
So there is a chance the graphic processor may be going out; or just the circuitry
that controls the backlight. An inverter may be weak or other circuit to the display
could be wearing out.
http://www.apple.com/retail/geniusbar/
If you have access to an Apple Store with Genius bar, they can perform some kinds
of diagnostic tests there even though the computer is out-of-warranty; that may be
of help to narrow down the cause of the symptoms you've noticed. They may not be
able to repair it, however, at an Apple Store; as it is rather old by today's standard.
An Apple Authorized Service Provider could do repairs and testing on older models
the Apple Store's Genius and other may not be set up to handle due to vintage.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
There is a country locator page to help find either of the above in regions outside
of the US & Canada, not sure how the above links would work; and it appears my
bookmarks to the country locator page may not be accessible now to post here.
You may be able to get an idea about what kinds of parts support the display
function by name by looking into an iFixit.com repair guide for your iMac series.
Hopefully the parts supporting the display are the reason it is dimming down, as
a graphic processor failure likely would exhibit other behaviors than just dimming.
PS: I see you've added content to your thread after I'd started working on this
& the answer likely is a hardware repair; professional testing is worth the time
and you seem to have at least one other thread on the same topic....
Good luck & happy computing!
edited 2x -
Is it possible to activate Microsoft Office 2010 with the answer file?
Hello
I'm not sure if this is possible but I have a volume product Key for Microsoft Office 2010 and I am currently working on an image that would activate Office 2010. Is that possible and how would I put that in the answer file? Everything I see on product key
activation just goes to activating for Operating systems on the image. Any help would be much appreciated.Yes, it's completely possible, but there are some specific steps you must perform, to avoid issues in the deployed computers.
This is because the Windows sysprep providers don't include a provider for Office (which means that Office doesn't get generalized by sysprep).
You must also take care *not* to execute any Office applications/components *after* running ospprearm.exe (because that will cause the Office components to indivuate, which un-does the effects of ospprearm.exe)
http://technet.microsoft.com/en-us/library/cc178964(v=office.14).aspx
Preparing the reference computer
To prepare the reference computer for imaging, follow these steps:
•Install Windows 7 Enterprise Volume Licensed version from DVD media.
•Enable the local Administrator account.
•Delete the temporary user account and profile.
•Install Office Professional Plus 2010 from the network installation point.
•Rearm the Office Professional Plus 2010 installation.
•Generalize the installation.
Also, some people find it useful to insert a specific Office activation command as a last step in the deployment. This is because Office setup will by itself only attempt automatic activation one time and will not retry. This can lead to unactivated installations,
warnings to the user, and helpdesk calls to you.e.g.:
'cscript.exe "c:\Program Files\Microsoft Office\Office14\ospp.vbs" /act'
This is not really an issue if you are using KMS, it's more of an issue when using MAK.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan -
now i got the answer that i phone cant be downgradable from 7 to 6.1.If it possible thats good.I expect newer version will be better,one fuction i liked in older version is contact picture size is full screen
tell apple: http://www.apple.com/feedback/
-
Hi, recently I have been making a list of songs and now that I have all of the songs that I want my iTunes is telling me to answer security questions that I forget the answers to, is it possible to get rid if this?
Damian_2087 wrote:
... I forget the answers... is it possible to get rid if this?
No.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Is it possible to flip the multiple choice quiz "radio" button from left to right of the answers?
Hello forum,
I am using Captivate version 6.1.0.319 on a Windows 7 desktop PC and would like to know if it is possible to flip the multiple choice quiz "radio" button from left to right of the answers. I am working on a project that uses the "Require Right to Left composer" within the Global Preferences: General settings. The captions has been switched from left to right but the quiz answer radio buttons did not. Any help would be appreciated.
Thanks, in advance.Hello and welcome to the forum,
I'm not aware of such a possibility. A workaround could be to create your own MCQ slides, using standard objects and widgets like the radiobuttons widget (there is an enhanced version created by Jim Leichliter) and advanced actions. These articles were written for previous versions, but can give you an idea about the work involved:
http://blog.lilybiri.com/widgets-and-custom-questions-part-1
http://blog.lilybiri.com/extended-widgets-for-custom-mcq-and-tf-questi
Lilybiri -
Hi I would like to figure out the answers to my security questions, is this possible?
Hi I would like to figure out the answers to my security questions, is this possible.
Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
How is it possible to download Lion on a Macbook Air. I have the answer that "it can't be downloaded on this computer". I bought it with my previous MacBook and I would like to make DVD of it. Thank you.
Check that your MBA meets the System Requirements for Lion..
See Here under General Requirements...
http://support.apple.com/kb/SP629 -
Dear,s
I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email:
<Email Edited by Host>
ThanksYou are not addressing Apple here. And your post is a bit confusing. See Klaus's answer in this thread:
https://discussions.apple.com/thread/5228474?tstart=0 -
I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.
I dont know how to check my particulars during filling up my registration in apple store support.
Hope u could give us advice. Thanks...
CandidoSG
<Edited by Host>Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699
Maybe you are looking for
-
Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter inco
-
SUS Purchase Order Confirmation notification (or alert) is possible ?
Hello, We work on a SRM 5 release with a classic scenario. We use the EBP-SUS supplier collaboration scenario (clients are different for SRM and SUS). The purchasing document flow is describe below: 1- SRM Shopping Cart 2- R/3 Purchase Request (then,
-
Start up issue - Fuzzy grey screen & lines on blue screen
Hi I have an issue where my Mac has recently had problems with starting up. I get the grey 'Apple' screen with lots of fuzzy lines. Sometimes it will progress to a login screen & sometimes will go to a plain blue screen with lines on it. It will alwa
-
This is just a simple OOP problem that i cant decide on a best implementation for. im passing an object to an instance of, 'TabbedFrame', which is just a frame with a Tabbed Pane in it that is holding custom panels. however, these custom panels need
-
TS4268 Can't get iMessage to start
Can't get iMessage to work