Post-Clone script error

Hello,
I am facing post-clone error on 11i O.S aix 5.3 when i run post-clone script on db it got error.share any solution is highly appreciable
$ perl adcfgclone.pl dbTier
Enter the APPS password [APPS]:
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
RC-50004: Error occurred in CloneContext:
null
Check logfile CloneContext_01210431.log for details.
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone.err file for errors
Thanks,
MAAN
Edited by: user1116442 on Jan 20, 2011 3:40 AM

Hello,
Yes i run sh orainstRoot.sh as root user after running orainstRoot.sh script as root user i run adcfgclone.pl script but it still getting error.
The 806 installer uses the oratab file.
The file oratab needs to exist at:
/etc/oratab
Please run the script /tmp/orainstRoot.sh as root
Restart adclone.pl after performing required corrections.
ERROR: Failed to execute /apps/oracle/orcldb/9.2.0/appsutil/clone/bin/adclone.pl
This error little bit change from above mention error which come at first time after running sh orainstRoot.sh.kindly look at this.
I didn't run adclone.pl as it saying in error Restart adclone.pl after performing required corrections.
i am asking you should i run adclone.pl as it in above error.and please tell how can i run adclone.pl..is it run as perl adclone.pl dbTier....?
Thanks,

Similar Messages

RH7 compiled topics won't display and throw an IE (syntax) script error

Pundits,
I am using RH 7 to create projects of about 600 topics. My OS is Windows XP Pro 2002, SP-3. My problem is that approximately 10% of the topics in my .chm file prompt an IE script error msg when I, or anyone else, tries to open them.
Here's the error msg:
When this window displays, user can click on either Yes or No and topic will display normally; the next time a user attempts to open this topic, same error displays, with same Yes/No click behavior.
When I look at the html for any of the "bad" topics (i.e., topics that won't display), there is always this one extra line of code, referring to the ehlpdhtm.js file in my project folder:
<script language="javascript" src="ehlpdhtm.js"></script>
This line is never in the html of the "good" topics.
Can anyone shed any light on what's causing this, and what I can do to remedy the situation?
Thanks in advance.
Dennis

William,
I have gone thru my project now and, as I stated in my May 1 mail to you, I have made duplicates of all of the "bad" topics and all of these new topics are now displaying correctly.
Now I have a related, but different issue.
Only one topic is causing that same error msg to display (refer to my original April 27 post: IE script error/syntax error; Line 13, character 1).
The only topic that throws that error msg is the initial topic that displays when the .chm file is opened (i.e., the topic that is specified as the "Default Topic" in the HTML Help Options window when I click the Generate Layout button in the SSL pod.)
Furthermore, the topic that throws the error message will only do so if it is the one specified as the Default Topic.
As an example, if I have the topic Apple specified as the Default Topic, when the .chm file is opened the error msg window will display; when the user clicks either Yes or No to the "Do you want to continue running scripts?" query, the Apple topic will display normally. Each time that topic is selected it will throw the same error msg. window.
If I go back to my project in RH and change the Default Topic to the Pear topic, re-compile the project, when the .chm file is opened the error msg will display; when you click Yes/No the Pear topic will display normally (until it's selected again). The Apple topic now displays fine at all times.
This tells me that the problem seems not to be with the Apple topic, as I'd suspected, but with something that's going on with RH and how it displays the initial topic in a compiled project. I think.
Any ideas on how I can remedy this issue?
Thanks in advance.
Dennis

HTTP 500 Internal Server Error while starting AppsTier post-clone

Hello,
Adcfgclone scripts on both DB and App Tiers, as well as Adautocfg scripts, complete successfully but I am faced with a "HTTP 500 Internal Server Error" and "The website cannot display the page" through IE when starting R12 Apps post clone. So far I have run a script on the cloned environment to synchronize the Workflow tables with APPS user, and re-ran autoconfig on both DB and App Tiers, but I still see the 500 error.
Any other pointers? Thanks in advance!

Adcfgclone scripts on both DB and App Tiers, as well as Adautocfg scripts, complete successfully but I am faced with a "HTTP 500 Internal Server Error" and "The website cannot display the page" through IE when starting R12 Apps post clone. So far I have run a script on the cloned environment to synchronize the Workflow tables with APPS user, and re-ran autoconfig on both DB and App Tiers, but I still see the 500 error.
Any other pointers? Thanks in advance!What does "adopmnctl.sh status" return?
The error you are getting "HTTP 500 Internal Server Error" is a generic one, please check Apache log files and the application.log file for details about the error.
R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [ID 813523.1]
Http 500 : Internal Server Error When Login To A New Cloned Environment [ID 781413.1]
Also, please confirm that you have no errors in the database log file.
Thanks,
Hussein

Error while running post clone on DB tier

Hi,
While running post clone on DB tier (12.1.1 version), I am getting the following error
Creating the control file for faat1212_jsrc-cn4 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Mar 8 18:24:10 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Mar 8 18:24:11 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
.end std out.
.end err out.
I am running the script only as oracle user and I also checked in the context file for the "dbuser", it also shows oracle user.
Please help
Thanks
Sasi

Hi,
I copied the ORACLE_HOME again and ran the post clone on DB tier again. This time I am getting the following error
Total System Global Area 1071333376 bytes
Fixed Size                  1318172 bytes
Variable Size             427819748 bytes
Database Buffers          629145600 bytes
Redo Buffers               13049856 bytes
Control file created.
alter database open resetlogs
*+
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Process ID: 6001
Session ID: 400 Serial number: 3
ERROR:
ORA-03114: not connected to ORACLE
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Mar 9 02:20:04 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
Disconnected from ORACLE
These are the last few lines in the alert log
+ORA-07445: exception encountered: core dump [PC:0x3D7E4214] [SIGSEGV] [ADDR:0xF718BE] [PC:0x3D7E4214] [Address not mapped to object] []+
Incident details in: /u02/app/oracle17/tech_st/11.1.0/admin/faat1212_jsrc-cn4/diag/rdbms/faat1212/faat1212/incident/incdir_2530/faat1212_ora_6247_i2530.trc
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0xB6F6A224] [PC:0x94EA856, {empty}]+
Errors in file /u02/app/oracle17/tech_st/11.1.0/admin/faat1212_jsrc-cn4/diag/rdbms/faat1212/faat1212/trace/faat1212_ora_6247.trc (incident=2531):
+ORA-07445: exception encountered: core dump [PC:0x94EA856] [SIGSEGV] [ADDR:0xB6F6A224] [PC:0x94EA856] [Address not mapped to object] []+
+ORA-07445: exception encountered: core dump [PC:0x3D7E4214] [SIGSEGV] [ADDR:0xF718BE] [PC:0x3D7E4214] [Address not mapped to object] []+
Incident details in: /u02/app/oracle17/tech_st/11.1.0/admin/faat1212_jsrc-cn4/diag/rdbms/faat1212/faat1212/incident/incdir_2531/faat1212_ora_6247_i2531.trc
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x1] [PC:0xAF3B863, {empty}]+
Tue Mar 09 03:20:08 2010
Sweep Incident[2546]: completed
Sweep Incident[2545]: completed
Sweep Incident[2538]: completed
Sweep Incident[2537]: completed
Please help..Thanks a lot in advance
Regards
Sasi

Error when running post clone

Hi. In running post clone on db tier I am getting following error for log permissions:
$ cd /FIS/app/DEV/oracle/product/9.2.0/appsutil/clone/bin
$ perl adcfgclone.pl dbTechStack
Enter the APPS password [APPS]:
password
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
The file access permissions do not allow the specified action.
sh: /tmp/adcfgclone.err: 0403-005 Cannot create the specified file.
The file access permissions do not allow the specified action.
sh: /tmp/adcfgclone.res: 0403-005 Cannot create the specified file.
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone.err file for errors
Which directory specifiically is this writing logs to? If its the /FIS/app/DEV/oracle/product/9.2.0/appsutil/clone directory then the permissions are already
drwxr-xr-x 9 oradev
Its kind of important I get this done soon.
Thanks for any advise.
DA

Actually I just created more permissions on the .err and . res files in /tmp and post clone worked.
Now I am trying to do control file recreation but failing with this:
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01161: database name PROD in file header does not match given name of DEV
ORA-01110: data file 1: '/FIS/oradata/DEV/data/system01.dbf'
I have doen backup control file to trace, then edited the script to change to DEV. The script now reads:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "DEV" NORESETLOGS ARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 500
MAXINSTANCES 1
MAXLOGHISTORY 1361
LOGFILE
GROUP 1 (
'/FIS/oradata/DEV/redo/log01a.dbf',
'/FIS/oradata/DEV/redo/log01b.dbf'
) SIZE 50M,
GROUP 2 (
'/FIS/oradata/DEV/redo/log02a.dbf',
'/FIS/oradata/DEV/redo/log02b.dbf'
) SIZE 50M,
GROUP 3 (
'/FIS/oradata/DEV/redo/log03a.dbf',
'/FIS/oradata/DEV/redo/log03b.dbf'
) SIZE 50M,
GROUP 4 (
'/FIS/oradata/DEV/redo/log04a.dbf',
'/FIS/oradata/DEV/redo/log04b.dbf'
) SIZE 50M
-- STANDBY LOGFILE
DATAFILE
'/FIS/oradata/DEV/data/system01.dbf',
'/FIS/oradata/DEV/data/system02.dbf',
'/FIS/oradata/DEV/data/system03.dbf',
'/FIS/oradata/DEV/data/system04.dbf',
'/FIS/oradata/DEV/data/system05.dbf',
'/FIS/oradata/DEV/data/rbs01.dbf',
'/FIS/oradata/DEV/data/ctxd01.dbf',
'/FIS/oradata/DEV/data/owad01.dbf',
'/FIS/oradata/DEV/data/dba247_01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA10.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA11.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA12.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX10.dbf',
'/FIS/oradata/DEV/data/tools02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX11.dbf',
'/FIS/oradata/DEV/data/tools03.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES03.dbf',
'/FIS/oradata/DEV/data/tools04.dbf',
'/FIS/oradata/DEV/data/APPS_TS_ARCHIVE03.dbf',
'/FIS/oradata/DEV/data/tools05.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX12.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES04.dbf',
'/FIS/oradata/DEV/data/tools06.dbf',
'/FIS/oradata/DEV/data/tools07.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA13.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA14.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES05.dbf',
'/FIS/oradata/DEV/data/tools08.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX13.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA15.dbf',
'/FIS/oradata/DEV/data/APPS_TS_ARCHIVE04.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES06.dbf',
'/FIS/oradata/DEV/data/system06.dbf',
'/FIS/oradata/DEV/data/discod01.dbf',
'/FIS/oradata/DEV/data/noetixd01.dbf',
'/FIS/oradata/DEV/data/qasd01.dbf',
'/FIS/oradata/DEV/data/tools01.dbf',
'/FIS/oradata/DEV/data/olapd01.dbf',
'/FIS/oradata/DEV/data/disco4id01.dbf',
'/FIS/oradata/DEV/data/lbl4id01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_SEED01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_INTERFACE01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_SUMMARY01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_NOLOGGING01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_ARCHIVE01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_QUEUES01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_MEDIA01.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA03.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA04.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA05.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA06.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA07.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA08.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_DATA09.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX03.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX04.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX05.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX06.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX07.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX08.dbf',
'/FIS/oradata/DEV/data/APPS_TS_TX_IDX09.dbf',
'/FIS/oradata/DEV/data/APPS_TS_SEED02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_NOLOGGING02.dbf',
'/FIS/oradata/DEV/data/APPS_TS_ARCHIVE02.dbf',
'/FIS/oradata/DEV/data/rbs02.dbf',
'/FIS/oradata/DEV/data/interim.dbf'
CHARACTER SET US7ASCII
I have done this before and it worked ... Metalink doesnt help much right now. Another problem!!

Running reports in SCCM: ActiveX Script Error

When I try to run some reports, I authenticate then it throws a Script Error. Error: ActiveX component can't create object: 'Microsoft.XMLDOM'.
This only happens on some reports and it only happens remotely. If I try to run the same reports on the local server, there aren't any issues.

Have enabled remote errors?
http://be.enhansoft.com/post/2013/01/16/Enabling-Remote-Errors-in-SQL.aspx
What exactly is the error that your are getting!
http://www.enhansoft.com/

Script Error in SE80 WDA Workbench WDYN Comp Layout

Hello folks,
I'm not sure whether to post this in the Basis Forum or somewhere completely different, but I'll try here first:
We've got a strange occurence since today within TA SE80 when opening WebDynpro Components and Navigating into the Layout of a View. The following script error is thrown repeatedly:
It doesn't seem to be a local problem since all co-workers I asked to check this were able to reproduce it. For some, me including, unfortunately, the error reoccurs infinitely, i.e. the error is thrown infinitley so that I can't even close the modus anymore and have to kill my SAP-GUI via the task manager. Naturally, developing is not possible at the moment :-/
I haven't found any threads/notes (neither manually nor via ANST) concerning this particular problem yet. Has anyone ever encountered something similar?
We are using WinXP SP3 with IE7 (please suppress the urge to tell me to use an up-to-date OS/Browser, I can't helpt it).
Backend System: NW AS 7.03 ABAP Stack 731 Level 11, ECC 606 (EHP 6) with SAP_HR 604 Level 73 and EA_HR 607 (HR-Renewal 1) Level 24
Cheers, Lukas
EDIT: P.S. I haven't implemented any notes recently that could cause this and nobody else I have asked so far did so either.
Message was edited by: Lukas Weigelt

Hi Kiran,
unfortunately the note is long obsolete for my system (see my opening post). I checked every MIME-Object (both those mentioned in the note and those that are not) for duplicates nevertheless - there are none.
That you pointed me to this note got me thinking though. We have recently applied several UR-Notes up to Patch 731 ST13/II in consultation with the SAP DEV support for unified rendering (because we opened some messages concerning accessibility problems). Could this script error be a side effect of doing that? Up until now, there have never been problems applying UR-Notes higher than the actual current Stack, this would be the first time.
I also checked for UR patches again today and found there now is one more patch available we have not yet implemented, i.e. Patch 731 ST13/III.... maybe I should implement that one as well, clutching at straws.
In any case thank you a lot so far, Kiran, thanks to you pointing to the note 1608760 I finally know what to search for, i.e. "view designer" and component BC-DWB-WD-ABA. My next step will be searching for more notes concerning this component. I'll get back here and put down some feedback once I've searched a bit.
Cheers, Lukas

Internet Explorer Script Errors in HTML Help

I am using Robohelp 8 HTML. I create both WebHelp and Microsoft HTML Help. My operating system is Vista.
The WebHelp file will be directly called from the application software to allow users to access topic specific help.
The Microsoft HTML help is to be attached to my company's website to allow remote users to access our online help.
I have created a project and generated WebHelp. Everything works as designed.
However, when I change the output to Microsoft HTML Help, I get Internet Explorer Script Errors when I try to review the output.
The compiler seems to find exception with two specific lines, specifically, AddMasterBreadcrumbs and again, highlightSearch.
When I attempt to review the output, I can simply click No when queried if I want to continue running scripts on this page and display the HTML help. It works as it is designed. Naturally I would prefer my users won't have to click through a few error messages to get to the help.
If I comment these two lines out in the topics, I don't receive these errors.
Although my work-around will allow a user to open the project without seeing those Script Errors, I am concerned that it might be introducing errors that I haven't found yet.
Does anyone else experienced this type of error in producing HTML Help?
Does anyone know the reason this is happening and can they offer an actual solution (and not a workaround?)
Thanks so much!
10570Fan

I've attached one of the screen shots and I took the liberty of posting the htm file (so you can track the specific line numbers to which the error messages refer). The second error message is the same, except it refers to line 117.
I checked with the developers and they will use the WebHelp version. However, they are curious (as am I) why we get these error messages. Any suggestions you can provide will be appreciated.
Thanks again.
10570Fan

Windows vista installer script errors

I have been unable to install certain pgms or windows vista updates because the installer gets a "script error". This occurred after IE v9 was automatically installed a year ago. I am looking for advice on how to repair the Vista OS because all repair efforts listed on Microsoft troubleshooting steps on the error code have failed. Can anyone tell me how to repair corrupt jscript files or re-load the OS without use of a VISTA install CD. This is a THinkpad R61i and the OS was pre-installed by Lenovo.

if you have the recovery partition you can use the thinkvantage button or F11 at startup to excess the recovery environment from there you can restore to factory or recover to a saved backup
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Trying to install latest version of Flash for Firefox on WinXP, get Internet Explorer Script Error

I'm trying to install the latest version of Flash (filename install_flashplayer11x32_mssd_aih.exe), browser = Firefox 14 (current), OS = Windows XP. I've tried multiple times, making sure to disable Norton Antivirus Autoprotect first.
At some point along the process - either during download or during installation - I get the following error message:
Internet Explorer Script Error
Line: 1
Char: 10010
Error: 'ActionLaunchAdobe' is undefined
Code: 0
URL: http://127.0.0.1:1174/app/_js/adobe.js
Do you want to continue running scripts on this page? [yes] [no]
Whether I answer [yes] or [no] the result is the same - the program hangs. It does not close, and when I close it manually it asks if I really want to stop it. But if I leave it there, nothing happens.
Per advice of the website, I uninstalled Flash in order to start over fresh. What that means is that, instead of having an outdated version of Flash, I now have none.
I've tried to RTFM but searches for this error come up empty. I'm curious why Internet Explorer is being involved in this to begin with. But mostly, I'm just curious how to get this thing to work.
Thanks for whatever help you can give me.
Dave

We're investigating this issue and we'd like to get some additional details. I'd appreciate if anyone experiencing these errors could do the following steps:
Download the Flash Player installer
Open a command prompt and navigate to the installer location (eg. "cd c:\users\username\downloads\")
Run the installer, using a “/debug”.argument (eg. “install_flashplayer11x32ax_chrd_aih.exe /debug”)
Once the installer runs and the error is reproduced, a file named “host.developer.log” will be created in your system’s temp folder.
You can quickly access the temp folder by clicking on Start > Run, then type "%temp%".
Locate the "host.developer.log" file and either post the contents in a reply or send directly to [email protected]
Along with the debug log, please include the following info:
Operating System (if you're on XP, what service pack do you have installed)
Browser
Network proxy setup (if applicable)
Thanks!
Chris

Unable to print pages directly from internet explorer 9 script error 2126

HP photosmart wireless b109n-z
computer Packard Bell One Two L5861 64bit
I am unable after going to many forums where it seems to be quite a problem and trying different ways to try and rectify a error mesage
An error has occurred in the script on this page
Char 1
Error Unspecified erroCode 0
URL: res://ieframe.dll/preview.js
do you wish to continue running scripts on this page?
yes no
I also have avio laptop which i have no problem with printing on the same printer
I have checked internet option advance settings and both have the same boxes ticked
i have ticked and unticked boxes reset internet unstalled and reinstalled printer
I can save most pages to documents and then print from there this depends on whats in the page
The only thing that seem to make any difference was to untick the internet option security enable protection mode which would ineffect leave my computer vulnerable to attacks which is not advisible
would be very pleased to hear if this can be resolved
many thanks

tejo11,
Script errors like this can happen with IE and while uncommon are not unheard of. With the print and scan doctor coming back fine we can move to troubleshooting the browser where the error originates. If you would like try using a different browser as a temporary workaround and use this microsoft guide for troubleshooting the script error you are getting: http://goo.gl/k7aTU
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Workshop ANT Script Error in JAX-WS and XMLBeans Facet

I am having a strange problem. I have a web service project created in Eclipse BEA Weblogic 9.2 Workshop IDE. The structure is:
-EAR...which consitutues
-JAX-WS WAR project
-EJB Project
The JAX-WS WAR has XMLBeans/XMLBuilder facets enabled to be used for compiling my XSD schemas being used in my web service.
When I build the project and export the ear through the IDE it works fine. I wanted to generate ANT scripts for all these projects so I can build and export the EAR through the command prompt. I was able to that. Now I wanted to check-in the project code in a source control management tool. Naturally I shouldn't check-in the .xbean_bin and .xbean_src folders generated by the the JAXB API against my schemas. The problem happens that when I delete these folders and then run my ANT build script through command prompt I get the following error:
assembly: [mkdir] Created dir: C:\Projects\kc\kces2\kcesWs\build\assembly\.src
[assemble] Input fileset contained no files, nothing to do. init.env: init.typedefs: init: generated.root.init: webservice.build:
[jwsc] JWS: processing module weboutput
[jwsc] Parsing source files
[jwsc] Parsing source files
[jwsc] 1 JWS files being processed for module weboutput [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\Syunus\LOCALS~1\Temp\_5l950r10
BUILD FAILED
C:\Projects\KEYCOM~1\kces2\kcesEar\build.xml:184: The following error occurred while executing this line: jar:file:/C:/bea/WEBLOG%7e2/workshop/lib/wlw-antlib.jar!/com/bea/wlw/antlib/antlib.xml:91:
The following error occurred while executing this line: C:\Projects\KEYCOM~1\kces2\kcesEar\build.xml:196:
The following error occurred while executing this line: C:\Projects\kc\kces2\kcesWs\build.xml:401:
The following error occurred while executing this line: C:\Projects\kc\kces2\kcesWs\build.xml:293:
The following error occurred while executing this line: C:\Projects\kc\kces2\kcesWs\build.xml:490: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
Total time: 13 seconds
The above mentioned XMLBean folders are created, my schemas are compiled but the build process terminates at that point when trying to compile the web service code file i.e. the jwsc task fails. Right after that, if I again initiate the build everything goes fine. Apparently the build script expects these 2 XMLBean folders to be present before hand?
The ANT build chain goes like this:
-ANT build script for the EAR project -> which calls child ANT build scripts for all referenced sub projects, which are the WAR (here it fails on the first run) and the EJB projects in my case.
Any idea why it is happening? Thanks a lot.
cross-posted at
http://www.coderanch.com/t/485654/Ant-Maven-Other-Build-Tools/ANT-Script-Error-JAX-WS:

Hi,
Hope you are doing good.
I needed some information on how to write a ANT script to create a deployable WAR file of web service built using JAX WS.
Could you help me with steps / ANT tasks / sample if any.
Thanks in advance.
Chandan
PWC

Scripting errors in date pickers

I have a problem whenever I am trying to access the date pickers in a UIX app that they will not display but come up with scripting errors and a whole load of questions marks ? Is this some sort of problem with the version of Java Im using ? Classpath or path variables ? I have noticed that the EM website wont render correctly either and has scripting errors on each page.
PS - Install on both tiers on Windows XP Pro
Thanks,
Brent

Brent,
JavaScript errors and missing images occur when your UIX installable resources (the cabo directory) are missing or out of date. To fix this, delete the cabo directory in you public_html directory (if you have one), then unpack JDEV_HOME/jdev/redist/uix2_install.zip into your public_html directory. (You can also delete the cabo dir and then compile the project in JDev, which will automatically unpack the installables for you.)
-brian
UIX Team
PS: Please try to include JDev version numbers in all posts so we know whether you are talking about 9.0.3 or 10g.

Script Errors

I tried uninstall/install, debugging, changing everything for
securty and popups, i have not tried using a "kitchen sink". Now I
am getting a lot of script errors.I might just try to System
Restore before all the changes and if that doesn't work, go
flash-less. This needs to be fixed.

Open Internet Explorer 10 on the desktop (not the Start screen). On the Tools menu, click Internet Options. (If you can't see the Tools menu, press the Alt button to display the menu bar.) On the Advanced tab, click to clear the Display a notification about every script error box.
Always tell us which computer you have when you post here. There is a label on the bottom.
-Jerry

Unable to launch the URL of the R12.1.1 Instance post clone

Dear Experts,
I am unable to get the home page of my insance post clone.
Upon Investigation i have seen the following error in the below location
$INST_TOP/logs/ora/10.1.3/j2ee/oacore/oacore_default_group_1/application.log
12/12/06 09:43:49.272 html: Error initializing servlet
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.sso.Utils
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:116)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
12/12/06 09:43:49.273 html: Servlet error
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.sso.Utils
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:116)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
12/12/06 09:47:44.783 html: 10.1.3.4.0 Stopped
Regards
Mohammed Abdul Muqeet

Please post the details of the database version and OS.
I am unable to get the home page of my insance post clone.Did postclone complete successfully with no errors?
Can you find any errors in the database log file?
Please run AutoConfig and make sure it completes successfully.
Upon Investigation i have seen the following error in the below location
$INST_TOP/logs/ora/10.1.3/j2ee/oacore/oacore_default_group_1/application.log
12/12/06 09:43:49.272 html: Error initializing servlet
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.sso.Utils
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:116)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
12/12/06 09:43:49.273 html: Servlet error
java.lang.NoClassDefFoundError: Could not initialize class oracle.apps.fnd.sso.Utils
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:116)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
12/12/06 09:47:44.783 html: 10.1.3.4.0 StoppedWhat is the output of "adopmnctl.sh status" command?
Please see these docs.
R12: Users Are Unable to Log Into Applications [ID 1497554.1]
R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [ID 813523.1]
R12: On a cloned target the logon screen reports 'HTTP error 500 Internal server error' [ID 1335176.1]
Thanks,
Hussein

Post-Clone script error

Similar Messages

Maybe you are looking for