Post EhP4 Upgrade - SUIM does not show Composite Role report

Hi
I'm having trouble in SUIM after we upgraded to EhP4. Specifically in the Roles by complex criteria selection.
When a list of single roles is displayed, I select a role and click on Contained in Composite roles (3-arrow button)
Instead of showing me the list of comp role that selected single role is found in, I get a collective list of all the single roles that are located in the same composite roles as the selected single role is found in.
Any help out there?
Regards,
Yergat

Hi,
Refer the below SAP Notes:
SAP Note 1393940 - SUIM| Incorrect results when searching for profile and roles.
SAP Note 1543140 - SUIM|RSUSR070 long text, USER_COMMAND_AGR
Regards,
Raghu
Added a new SAP note, which is also relevant

Similar Messages

  • Transaction posted to subledger account does not show as open

    Hi Experts,
    After configuring the basic settings, I posted an expense based vendor invoice using T.Code FB60. When I checked this entry in Vendor line item(FBL1N), it does not show as open, but cleared. At line item level clearing details show as follows "Clearing     10/09/2011 / ALE-extern". Is it a technical problem or a fuctional?

    Hi,
    Please check this note which may help you:
    Note 712678 - ALE FIDCMT Correction Report: Reset Clearing 'External ALE'
    Note 382005 - ALE FIDCC1/2: correction report set/reset clearing
    I dont know which has been indicated in note but still it is something regarding external system for which your document gets cleared automatically in external system.
    You can also check with your ABAP or BASIS person.
    Regards,
    Jigar
    Edited by: Jigar Thakkar on Oct 10, 2011 1:04 PM

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • Plan Data Does Not Show in FI Report

    I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029.  I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report.  Is there some transfer transaction I am missing? 
    Thanks
    David

    I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table.  This report brings in all of the primary cost element postings as well as the secondary overhead postings.  This provides a much more holistic view of FICO reporting.  I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption.  This special section for orders should be zero if everything is settled to either WIP or variances.  Otherwise I see a order related settlement problem on the face of the income statement.  I found there was a slight problem with the secondary postings between the cost center and order.  I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
    Once I haad the actual postings working, the next problem was that no plan data was coming to the report.  I had to work through many details to finally get the plan data to come through, but now it works as designed.
    Juggler

  • Variable based on calender dashboard prompt does not show in the report

    hello,
    i have at the dashboard a calender prompt for a column of date format and a pres variable for that value ('DAY'); i placed in the report a column of which content (fx) is @{DAY};
    when i run the report the value of my variable is 0 instead of chosen calender day; the report gets filtered on the day, however only if data.day='@{DAY}; if i choose '<' or '>' it still filters on this one day; why is this happening and how can i work around?

    ok, found that
    http://108obiee.blogspot.com/2009/03/how-to-change-date-format-mask-in-date.html
    seems that this answers the questions

  • Internal table field does not show data.

    hello experts,
    I am currently modifying a code in a report where it shows PO's and it amount, downpayment, Invoice, GR, payment and balance. Now the problem is, some of the PO amount(it gets the amount from ekpo-netwr) does not show on the report output. the field is t_amount-netwr. I really need help on this one guys. Thanks and take care!
    PERFORM process_with_budat.
    FORM process_with_budat.
      DELETE t_pohistory WHERE hist_type <> 'A'
                           AND hist_type <> 'E'
                           AND hist_type <> 'Q'.
      LOOP AT t_account.
        DELETE it_dtl WHERE ebeln = t_account-ebeln
                        AND psphi IS initial.
        DELETE t_ekpo WHERE ebeln = t_account-ebeln
                        AND ebelp = t_account-po_item.
        t_proj-ebelp = t_account-po_item.
        SELECT SINGLE psphi FROM prps INTO t_proj-psphi
              WHERE posid = t_account-wbs_elem_e.
        CHECK sy-subrc = 0.
        LOOP AT t_pohistory WHERE po_item = t_account-po_item
                              AND ebeln   = t_account-ebeln.
          t_amount-ebeln = t_account-ebeln.
          t_amount-psphi = t_proj-psphi.
          ON CHANGE OF t_pohistory-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
          ENDON.
          IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ELSEIF v_ebeln <> t_account-ebeln AND
                 v_ebelp <> t_account-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ELSEIF v_ebeln = t_account-ebeln AND
                 v_ebelp <> t_account-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ENDIF.
          CHECK NOT t_amount-psphi IS INITIAL.
          if t_pohistory-pstng_date LE pa_augdt.
         IF t_pohistory-pstng_date IN so_augdt.
            IF t_pohistory-db_cr_ind = 'H'.
              t_pohistory-val_loccur = - t_pohistory-val_loccur.
              t_pohistory-val_forcur = - t_pohistory-val_forcur.
              t_pohistory-cl_val_loc = - t_pohistory-cl_val_loc.
            ENDIF.
            IF t_pohistory-hist_type = 'A'.
              IF t_pohistory-currency <> 'PHP'.
                t_amount-dpamt = t_amount-dpamt + t_pohistory-val_forcur.
              ELSE.
                t_amount-dpamt = t_amount-dpamt + t_pohistory-val_loccur.
              ENDIF.
            ELSEIF t_pohistory-hist_type = 'E'.
              IF t_pohistory-currency <> 'PHP'.
                t_amount-gramt = t_amount-gramt + t_pohistory-val_forcur.
              ELSE.
        t_amount-gramt = t_amount-gramt + t_pohistory-val_loccur.
              ENDIF.
            ELSEIF t_pohistory-hist_type = 'Q'.
              IF t_pohistory-currency <> 'PHP'.
           t_amount-iramt = t_amount-iramt + t_pohistory-val_forcur.
              ELSE.
                t_amount-iramt = t_amount-iramt + t_pohistory-val_loccur.
              ENDIF.
            ENDIF.
            IF t_pohistory-currency <> 'PHP'.
              IF t_pohistory-val_loccur = 0 OR
                 t_pohistory-val_forcur = 0.
                t_amount-tramt = t_amount-iramt.
               t_amount-tramt = t_amount-dpamt.
              ELSE.
                t_amount-tramt = t_amount-iramt.
              ENDIF.
            ELSE.
              t_amount-tramt = t_amount-iramt.
             t_amount-tramt = t_pohistory-cl_val_loc + t_amount-dpamt.
            ENDIF.
            IF NOT t_pohistory-cl_val_loc IS INITIAL.
              CONCATENATE t_pohistory-mat_doc t_pohistory-doc_year
                    INTO bkpf-awkey.
             SELECT SINGLE * FROM bkpf
                   WHERE awkey = bkpf-awkey.
    *AVH - removed wrbtr and dmbtr from selection
              SELECT augdt augbl shkzg FROM bsak
                    INTO (bsak-augdt,bsak-augbl,bsak-shkzg)
                    WHERE bukrs = bkpf-bukrs
                      AND gjahr = bkpf-gjahr
                      AND belnr = bkpf-belnr.
    *AVH
                if not bsak-augbl is initial.
                  select belnr gjahr from bsak
                   into (bsak-belnr, bsak-gjahr)
                    where bukrs = bkpf-bukrs
                     and belnr = bkpf-belnr
                     and gjahr = bkpf-gjahr.
                    select awkey from bkpf
                     into v_bkpf_aw
                     where bukrs = 'GLOB'
                       and belnr = bsak-belnr
                       and gjahr = bsak-gjahr.
                      w_len = strlen( v_bkpf_aw ).
                      w_off = w_len - 4.
                      v_awkey_1 = v_bkpf_aw+0(10).
                      v_awkey_2 = v_bkpf_aw+w_off(4).
                      select single dmbtr wrbtr from ekbe
                        into (ekbe-dmbtr, ekbe-wrbtr)
                       where belnr = v_awkey_1
                         and gjahr = v_awkey_2.
    *AVH - Changed all bsak-wrbtr to ekbe-wrbtr and dmbtr to ekbe-dmbtr.
                      IF bsak-shkzg = 'H'.
                        ekbe-dmbtr = - ekbe-dmbtr.
                        ekbe-wrbtr = - ekbe-wrbtr.
                      ENDIF.
                      IF t_pohistory-currency <> 'PHP'.
                        IF bsak-augdt GT pa_augdt.
                 IF bsak-augdt IN so_augdt.
                          t_amount-tramt = t_amount-tramt + ekbe-wrbtr.
                        ENDIF.
                      ELSE.
                        IF bsak-augdt GT pa_augdt.
                 IF bsak-augdt IN so_augdt.
                          t_amount-tramt = t_amount-tramt + ekbe-dmbtr.
                        ENDIF.
                      ENDIF.
                    endselect.
                   endselect.
                  endselect.
                endif.
              ENDSELECT.
            ENDIF.
            IF t_account-distr_perc <> 0.
              t_amount-dpamt = ( t_account-distr_perc *
                                 t_amount-dpamt ) / 100.
              t_amount-gramt = ( t_account-distr_perc *
                                 t_amount-gramt ) / 100.
              t_amount-iramt = ( t_account-distr_perc *
                                 t_amount-iramt ) / 100.
              t_amount-tramt = ( t_account-distr_perc *
                                 t_amount-tramt ) / 100.
            ENDIF.
          ENDIF.
          IF t_amount-tramt < 0.
            t_amount-tramt = 0.
          ENDIF.
          t_amount-tramt = t_amount-iramt.
          t_amount-blamt = t_amount-netwr - t_amount-tramt.
          COLLECT t_amount. CLEAR t_amount.
          APPEND t_proj.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR v_netwr.
          SELECT SINGLE netwr FROM ekpo INTO v_netwr
                WHERE ebeln = t_account-ebeln
                  AND ebelp = t_account-po_item.
          t_amount-ebeln = t_account-ebeln.
          t_amount-psphi = t_proj-psphi.
          t_amount-tramt = t_amount-iramt.
          t_amount-blamt = t_amount-netwr - t_amount-tramt.
          COLLECT t_amount. CLEAR t_amount.
          APPEND t_proj.
        ENDIF.
      ENDLOOP.
    endform.
    **This is where it transfers the data**
    LOOP AT t_amount.
        it_dtl-netwr = t_amount-netwr.
        it_dtl-dpamt = t_amount-dpamt.
        it_dtl-gramt = t_amount-gramt.
        it_dtl-iramt = t_amount-iramt.
        it_dtl-tramt = t_amount-tramt.
        it_dtl-blamt = t_amount-blamt.
        MODIFY it_dtl TRANSPORTING netwr dpamt gramt
                                   iramt tramt blamt
              WHERE ebeln = t_amount-ebeln
                AND psphi = t_amount-psphi.
        CLEAR it_dtl.
      ENDLOOP.

    hi ,
    just place the code and check for a particular po if its there inthe ekpo table then it has to get it for ur select single query .
    but ur logic is build on if --- endif.check this option first of all.
    if in the debugging u see the value then as u say in the report output u r not able to see the value then the problem will be space alignment also.
    check the value in debugging and let us know first of all . okay
    vijay.
    IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.
    v_ebeln = t_account-ebeln.
    v_ebelp = t_account-po_item.
    ELSEIF v_ebeln <> t_account-ebeln AND
    v_ebelp <> t_account-po_item.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.
    v_ebeln = t_account-ebeln.
    v_ebelp = t_account-po_item.
    ELSEIF v_ebeln = t_account-ebeln AND
    v_ebelp <> t_account-po_item.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.

  • TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

    After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

    I have the same problem. It was working fine up until the last update for iTunes 11.0.2
    Here's the details:
    I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
    I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
    AppleTV used to be there consistently, then disappeared upon update to 11.0.2
    Apple TV also does not show up in the devices tab under the Preferences window.
    I have tried multiple suggestions on the support forum but none have worked.
    Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return. 
    Both have latest software downloads.
    I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
    I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
    One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
    Have you ever wronged a two year old?
    It is NOT pretty.
    Help me Apple-wan-kenobi...I can't take the screaming!

  • After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

    I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
    I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
    Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
    My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
    I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
    Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
    Any help would be appreciated. Thank you.

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
    In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
    I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

    After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

    Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc")  upwards.  I thought it was gone too but it's still there~just takes different way to access it.

  • Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination"  the installation stalls and does not show any destination disks

    I have a Power Mac G4, it has OS 9.  Imam trying to upgrade to OS 10.2.3 (Jaguar).  It is going smoothly until I get to the "Select Destination"  screen.  It stalls there and does not show any disks to choose from.
    Any ideas?
    Thanks. Abe Oliver

    Hello Abe,
    If it's a Digital Audio or earlier, you need to install a Firmware update first...
    As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
    http://support.apple.com/kb/HT1395?viewlocale=en_US
    Power Mac G4
    Firmware Update
    Download Document No.
    Power Mac G4 (Mirrored Drive Doors 2003)
    no update needed
    Power Mac G4 (FW 800)
    no update needed
    Power Mac G4 (Mirrored Drive Doors)
    no update needed
    Power Mac G4 (QuickSilver 2002)
    no update needed
    Power Mac G4 (QuickSilver)
    no update needed
    Power Mac G4 (Digital Audio)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (Gigabit Ethernet)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (AGP Graphics)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (PCI Graphics)
    no update needed
    Power Mac G4 Cube
    Power Mac G4 Cube Firmware Update 4.1.9
    75129

  • HT1338 Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows "  System Version:     OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an update

    Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows "  System Version:
    OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an update

    You can Contact MAS here.

  • Want to upgrade to lastest version - help/about Firefox window does not show "upgrade" as in instructions.

    I want to upgrade to latest version but -Help/About Firefox- window does not show "upgrade" as in the instructions. I cannot find an "upgrade" function anywhere else. How do I upgrade? The version I have is -18.0.1- it came with this used computer.
    I believe this computer was hacked. Word started doing very strange things. We wiped the hard drive and reloaded everything as it was originally when I bought it. I am now getting hacked online.
    They originally got into one of my credit cards last fall. That is when this all started. They got my AOL email address. They also got the credit card current balance, minimum payment, due date and then even the payment amount. They got into my Barnes & Noble account and now checkout does not work. Now I believe they have gotten into my AOL account - one thing after another has started going wrong. I cannot change that AOL user id/email address since it is the master and I would lose about 15 years of "stuff".
    The folks that sold me this computer told me to use a free version of an antivirus. I am very unhappy with it. I never had ANY trouble when I used TrendMicro's expense products. Those folks also told me to use Firefox, since AOL uses Internet Explorer - which I already knew is like Swiss cheese.
    Now, I cannot seem to get an upgrade of Firefox. Is this also a hack?
    Please help any way you can. Thank you for your time.

    It's probably just the Firefox updater having some problems. go to www.getfirefox.com and download Firefox 20.0.1

Maybe you are looking for