Post long text in ' F-65 '.

Hi experts,
I have a program to upload to ' f-65 ' tcode, from the flat file.
i uploaded using bdc, there is an error in long text, as per my requirement it should be more than 200characters, but in the posting it accepting only 72characters only, if the text has more than 72 , then it showing error ' Text length is more than Screen field '... some body told use create_text Function module...
but i'm not getting clear idea.. can any body advice me with relavant coding.
Thank you.
Regards
Ravi M

Once the document is posted thru F-65 then use the document number to create the long text by using the FM INSERT_TEXT. Pass the parameters Text name ( it is combination of document number ), language, text id and text object.
Goto the long text editer then GOTO -> HEADER. here you can find the required details to pass the FM.
Step1 : Post the document thru F-65.
step2: Upload the long text by using the Function Module: INSERT_TEXT

Similar Messages

Post long text for document line item via FI-GL Inbound IDoc

Hi guru,
I am trying post extension ZFIDCP02 linked basic type FIDCCP02 and message type FIDCC2 IDoc in R/3 (4.6c) via IBM Websphere (Inbound IDoc),
I am use inbound function module IDOC_INPUT_FIDCC2 and activate exit 008 (EXIT_SAPLF050_008) and exit 002 (EXIT_SAPLF050_002),
In the extension ZFIDCP02 and under E1FISEG, I am add my segment ZITEXT include field TDSPRAS, TDID, TDOBJECT, TDLINE.
I am send ZFIDCP02 IDoc via IBM Websphere no error but all field TDSPRAS, TDID, TDOBJECT, TDLINE in my segment ZITEXT not post in FI-GL.
How can I post long text for document line item (ZITEXT) in FI-GL ?.
and I'm mean post ZITEXT to bank statement via IDOC.
Please throw light on this and may be I 'm want solution or example ABAP code for exit 002 (EXIT_SAPLF050_002).
Thanks in advance,
Akkapong Pirachai
CAT Telecom
Edited by: Akkapong Pirachai on Aug 20, 2008 7:40 AM

Close question because long time for answer.

Problem in Long text save in CO02

Hi All,
I am posting long text for a production order using 'CREATE_TEXT' and its updating in the tables succesfully.
The same old probelm is it is not appearing in the CO02 or CO03 tcodes.
I did a direct AUFK-LTEXT update as suggested in many of the threads I searched, but of no use.
Pls suggest some solutin in this regard.
thanks in advance.

I know this is old post but I got few updates like updating Long Text of Production Order using BAPI "BAPI_ALM_ORDER_MAINTAIN".
First check if Order is having long text maintained by checking AUFK-LTEXT. If blank -> no text.
For Existing Order(00XXXXXXXXXX) having no text maintained : -
METHODS TABLE
REFNUMBER
OBJECTTYPE
METHOD
OBJECTKEY
1
TEXT
CREATE
00XXXXXXXXXX
SAVE
IT_TEXT TABLE
If you want to add 2 rows, TEXTEND = 2.
ORDERID
LANGU
TEXTSTART
TEXTEND
003000036669
EN
1
2
IT_TEXT_LINES
TDFORMAT
TDLINE
LINE 1
LINE 2
Execute BAPI and call BAPI_TRANSACTION_COMMIT after this BAPI
For Existing Order having text maintained : - only one change in above process, populate other areas similarly
Methods table
REFNUMBER
OBJECTTYPE
METHOD
OBJECTKEY
1
TEXT
CHANGE
00XXXXXXXXXX
SAVE

Function Module for BOM for posting BOM component long text

Is there any SAP provided Function Module for posting BOM components long
text if so please let me know as it is very urgent for me.

Hello Sridevi,
The following customer exits are available for BOM, please check the excect one.
http://help.sap.com/saphelp_46c/helpdata/en/4a/d286ba5a1111d3b47b006094b9d648/frameset.htm
Hope this helps.
Regards
Arif Mansuri

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to display long text in Arabic quickly Flash Builder ?

Hi,
I have prepared an application for Android in Adobe Flash Builder. In application there are prayers in Arabic as a list. In app , short prayers are displaying quickly, but long prayers are displaying after a long time. This is my problem.
I share my project file in addition.Can anybody help me, please?
Note: I used SQLite database in my project as you can see and I used a font to view prayers in Arabic.
Prayers.zip - Google Drive

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

Why can i no longer text people from my mac?

before i could message my friends and their iphones.... but know my imeesage turned to google talk and i can no longer text directly to their phones. What is happening?

What was before? And what is now?
It is a good idea to include the machine type and OS version in your problem posts.

After upgrading to iOS 8.3, the keyboard has frozen up and I can no longer text or access my contacts. I've re-booted the phone several times, to no avail.

After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts. I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android. Can anyone help or have the same issues?

Im having the same problem. This started with iOS 8 and Yosemite. Im in a group message with 10 people with and without iPhones. Currently have 9 threads and when ever a new person responds a new thread forms. they all have the same people but in a different order, that may be part of the reason why iMessage doesn't recognize them as the same conversation.
As I'm writing this post 3 new threads opened and other people with and without iPhones are mentioning the same problem
hope apple can fix this. VERY annoying

Box in Long text of sapscript

Hi All,
I have created a script.....in that i have to print only long text in the main window.
Now my problem is...the LONG text is breaking and going to next page...
means a part on 1 page and remaining on subsequent pages..
And the problem is the box which i have put arround the main window is coming only in first page and last page . In between pages the box arround the main window is not coming .
How to get the box around those pages also.
help me out...
Thanks,
Guru

Hi
The property of MAIN window is like that, If the Data is more than a Page it automatically goes to next pages.
So better decide where I mean in which you wants to print ? In MAin window , then it automatcially goes to other pages. use a new paragraph format and mention PAGE PROTECTION for that such that it prints in the Same page.
For the boxes see the seetings of the main window in all pages, especially in NEXT page.. so that the box is coming properly
see the box related commands
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Reward points for useful Answers
Regards
Anji

FI document Line item Long text store in which table .

Respected Members,
During posting of the FI document through Tcode F-02 i m giving the some text in the long text not in the text field.
Please anybody can be help me out where exactly this long text is going to be stored or in which table.
Through F1 it is saying Field is TXLINE and Structure is RSTXT.
But i want the table name.
Please give me the answer as soon as possible .
Thanks a lot.

Hi Lee,
I am also facing problem in getting the long text information into my on e of the custom report, i need onformtion in longtext field of the accounting document number which is against item posted to vendor.here i am sending you the screenshot of the document number and long text filed and READ_TEXT function module parameters, i tried with lot of options,but no luck, it would be great if you could provide me some hint on this..

Problem loading hierarchy long text. Item text only displays 45 characters

Hi,
When loading the Financial Statement hierarchy from ECC to BI I am only getting a 45 character long text for the nodes. This text seems to correspond to the "Item" text seen in transaction fse3 in ECC. However, the text that I need to have is the (concatenated) long text enterer in the multiple fields under either "End of Group" or "Start of Group" (under Item: Display Texts in fse3).
Does anyone know if it is possible to extract this information and how to go about when doing this?
Points will be rewarded for help.
Regards
Nils

Hello Vânia,
>> fac586, Thank you very much for your help ….
Just so you know, fac586 is called Paul :).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

BAPI_ACC_DOCUMENT_POST long text field missing

Hi,
I will have to transfer our vendor open items from v 3.1 to ERP 2004. I
am using BAPI_ACC_DOCUMENT_POST to upload these open items. However, I
cannot find the 'LONG TEXT' field in the said BAPI. In using F-02, a
long text field/button is available. How can i post an entry in the long text
field of the line item in f-02 using BAPI_ACC_DOCUMENT_POST.
Also, i have used the extension1 table and a BTE (note 487722) in
uploading the posting key. Since field bschl is available in table
accit, there was no problem in doing this. However, i cannot seem to
find the field long text in this table. Is it available? If not, what
can I do with the above situation.
Thanks.

Hi
Excuse me! you can't use RFBIBL00, use the fm SAVE_TEXT.
After calling the BAPI you should have the number of FI document will be created and know in which item you need to insert the long text so:
THEAD-TDOBJECT = <Object text>.
THEAD-TDNAME(4) = <Company code>
THEAD-TDNAME+4(10) = <Document number>
THEAD-TDNAME+14(4) = <Fyscal year>
THEAD-TDNAME+18(3) = <Item number>.
THEAD-TDID = <Id text>.
THEAD-TDSPRAS = <Language>.
THEAD-TDLINESIZE = 72.
These are the header data, transfer the text in LINES parameters.
Max

How to upload and download Long text for WBS, Project, Network

Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.

One thread in the correct forum is good enough, no need to double post across ABAP forums. Thanks.
Regards,
Rich Heilman

Put Fixed guide line in long text of Notification: IW21

Hi,
I have an requirement where I need to put some fixed guide line in the notification long text whenever notification order gets created.
For an example below guidelines need to be incorporated automatically in the long text of notification whenever they get created
Ex:
Long Text Template as follows:
Detailed description of fault:
What caused the fault?
Action taken to date:
Who:
Suggested Repair / resourcec:
Please suggest how can I implement this requirement?
Appreciate your help in advance.
Thanks,
Jay.
Moderator message : Duplicate post locked. Continue with original thread.
Edited by: Vinod Kumar on Sep 14, 2011 11:29 AM

Hi,
Check the user exit :- QQMA0025 PM/SM: Default values when adding a notification
For wiring into longtext i think u can update via WRITE_TEXT
You should also ensure that this information should not be changed
regards
pushpa

IW22/IW23 Long text font error

Hi,
I'm not sure whether this is the right thread to post this question, maybe it is about general basis, I'm not sure.
In the IW22/23 notification screen, the Turkish characters in the long text are displayed wrong, like in the picture.
The Sap GUI setting fonts are Turkish.
We are having this problem after the ECC EHP7 upgrade.
What can be done to resolve this issue?
Thanks,

Koray Tulumen,
Is it the same issue for other long-texts e.g. order header/operation long-texts?
I would discuss this issue with you ABAP/BASIS team.
PeteA

Post long text in ' F-65 '.

Similar Messages

Maybe you are looking for