Post Script 2UP trayswitch Command need

Hi friends,
I am a fresher in post script file printing. I need a command for postscript 2UP trayswitching for xerox printers. Please help me.

PostScript is a programming language, and a PostScript file is a program. So editing is entirely possible, if you are prepared to spend the time to learn the programming language in detail.
I can tell you that this fragment means nothing by itself. The names w, x, L are not part of the PostScript language. They will be procedures defined above. A program can take a lot of unravelling and understanding, even for a very experienced PostScript programmer.

Similar Messages

How to Print Post Script Files

Hi All,
I am trying to make a utility software in foxpro that could print post script file on:-
1) Post script printer
2) Non Post Script printer
Operating System Windows 95 & above
Help is requested from all the community members
Reagards
Harsh

PostScript printer - send it to the printer port e.g. LPT1: with a simple copy.
Non-PostScript printer - you'll need to buy a PostScript RIP, or perhaps use Acrobat Distiller to convert the PostScript to PDF, then print the PDF with Acrobat's API - see the Acrobat SDK. (This is not possible with the free Reader).

Converting Back to Original PDF Using Post Script File

Is there any way to convert back to an original PDF using a post srcipt file that was created from that original PDF? Allow me to fully explain my situation:
I converted multiple pdf's that I created into a post script file. I then utilized Adobe Distiller to convert them into a pdf that could be used for better printing and better usability by the end user. Unfortunately, when Distiller did this conversion, it replaced my original pdf with the new one. By the time I realized what was happening, all files had been replaced.
I still have the post script file that was created from the original PDF file; is there any way possible using this post script file that it can be somehow converted back to the original PDF file? There are some edits that I need to do on the original PDF. The pdf that Distiller creates doesn't allow for anymore edits. My goal is to be able to make my edits without having to re-create 37 pages of documents.
The software versions I'm using are as follows: Adobe Acrobat X Version 10.1.4, Adobe Distiller Version 10.1.438.
If anyone has any ideas, please let me know!

Hello, thank you for responding.
Yes the url links start with http:
For example when I type in
http://canberracontemporaryartspace.wordpress.com/2013/07/06/staying-out-of-trouble/
in the word document and click on it, the link works; but when I save it as a pdf it says "not found"
And then when I type in
http://www.camberwellspecialists.com.au/what-is-skin-cancer.html
in the word document and click on it, the link works; but when I save it as a pdf it says "page not found"

Indesign Post Script name changing to back up file name

Hi all
I am in a pre press workflow that requires that I write a post-script file to a hot folder.
So saving as a post-script is the only option for our entire workflow to take place.
When saving the post script file from indesign , the name defaults to the back up file name which is
not similar to the original file name. We deal with an extremely large number of pages
and need for this file name to stay the same as the original not the back up. Manually putting these file names
in is a serious chance for error and takes too much time.
Does anyone know how to prevent the name from changing?
Thanks for any help.

You should be posting to the InDesign or Acrobat forum. Please repost there giving them your version of InDesign and Acrobat. Detail you method of creating the postscript file. You should be printing to file using the Adobe PDF printer instance. I only suggest the InDesign forum, since the print dialog box in InDesign is not a standard Windows Print dialog box.

Unable to create post script file in framemaker.

I installed TCS 4.0 licensed suite. Due to some reason I need to delete Adobe PDF from Devices and Printers. Since then I am unable to create post script file using framemaker. I have tried uninstalling and installing TCS 4.0 again, but all in vain. What should I do now?

If you delete critical parts of Acrobat there will be problems. Try doing a REPAIR of Acrobat Pro (from the Programs Control Panel), maybe it can undo the damage.

Creating Post Script File from Word Document

Hi How to create a Ps File from Word document.. Is there any api to do this ?
~Arjun

(1) It is
PostScript, not
Post Script or
Ps!
(2) To create PostScript from a Microsoft Word document, you simply open such a document in Microsoft Word and print to a PostScript printer driver instance, but chose the
Print to file option. Note that since PostScript from drivers is device-dependent, you do need to choose a PostScript printer driver instance very carefully based on a PPD that has few device dependencies.
- Dov

SapScript output spool to a POST script file

We generate billing invoice output using custom
program/Sap script. Subsequently we release the invoice print out from
the print spool to create a post script file from the print spool by configuring command set "G" in
transaction u201CSPADu201D. This processis is working fine in R/3
However, when we migrated the same functionality to ECC, we are finding
that the file created containing only garbage data.
Anyone has encountered this issue and have suggestions to resolve this.
Thanks
Palani

Hi Gary
How the issue is resolved, please let me know. Since i am also facing same issue.
Thanks
M G Shankar

How text data is formated in post script language level 2

Hi all,
In post script language level 3 files text data is converted to hexadesimal format and kept in between xshow commands. But in postscript language level 2 files, text data is converted to some other format.
Can you please inform me, to which format text data is converted.
Thanks,
Sateesh.

PostScript: Level 2

Exctract data from Post Script file

Hi all;
I need to extract, manipulate some data from post script file send them to database.
How can i do that process?

OT: Hey Rene, I see you've become a local celebrity
around here!I'm still waiting for the groupies to show up, though. No luck so far. :p
I think it's a nice initiative and
enjoyed reading the interview.
; )Thanks. :)

Aperture update and post script printers

I downloaded the latest Apple update for raw cameras, ie 50D, and now when I move any image to photoshop to print, I get a pop-up saying my epson 2400 is not a post-script printer and all prints cone out very dark regardless of adjustments....any ideas. The printer/photoshop combo has worked perfectly up to this point.

How are you moving your file from aperture to photoshop and in what format?
Check that the export preset you are using from aperture has not been changed by update.
Does the image look ok in photoshop before sending to printer? Does it look very different from same image in Aperture?
Try printing direct from Aperture (if you need photoshop processing do it using photoshop as the external editor), Aperture can do very good prints.
Try printing an image from photoshop that was exported from aperture before the update, if thats still bad then problem would appear to be with photoshop, if that print is good then problem probably lies between aperture/photoshop.
What version of Photoshop do you use?
Have you done any other updates to your system software in the same period?

How do I download a post script driver to create a PDF, I am receiving an erro message system error:1797 ?

I am trying to create a PDF from my layout page. I get the message that I have to download a post script driver. I have gone to the Adobe download site and attempted to download the driver but I get the error message Failure is AddPrinter (generic post script printer). System error: 1797 Printer driver unknown.
I have a HP Office Jet 6600 printer. Can anyone help?

Hi Chapinpro,
In order to convert your document/ Print your document to PDF you need to have PDF printer installed, which gets installed after installing Adobe Acrobat.
Using Adobe Acrobat you can convert most of documents to PDF.
Note: Postscript drivers are meant to convert documents to PDF format.
"These drivers enable you to print documents from applications running in these Windows platforms to any printer that includes Adobe PostScript Level 2 or Adobe PostScript 3. You can also use this driver if you received a previous version of AdobePS bundled with an Adobe application, and are printing to any device that supports PostScript language level 2 or later. This version of the AdobePS printer driver does not work with PostScript Level 1 devices, and does not work with Windows NT 3.5x. " Reference:: Adobe - PostScript printer drivers : For Windows : Adobe Universal PostScript Windows Driver Installer 1.0.6 - English
Regards,
Ajlan Huda.

Locating a post script printer

Hi all,
Its my understanding that MacBook Pro with Mountain Lion have a post script printer loaded up. When I try to select this printer, I do not see it. How can I find it? If there is not one built in, what is a good driver to get?
Thanks!

Apple does not make printers as far as I know, you must choose a printer that fits your needs, then download the drivers from the manufacturers site.
I think they refer to them as "air printers"

Post Script Drivers

Hi All,
We are using Canon IR8500 printer with 'POST Script printer driver' .
Our requirement is to print text vertically on a smart form using this printer. The way out is to define a print control for this printer to print the text vertically. But we dont have the Hexadecimal string or control character sequence to define the print control.
I have a hexadecimal string which we can use if we are using PCL driver; so i need the string for Post Script driver.
Please reply back if anybody knows wt's the string or how we can get that string value.
Thanks in advance.
Regards,
Pankaj Sharma

may be this can help u out.
text = prabhu
so maintain table like ths
p
r
a
b
h
then
maintain one Col to display in ur layout.
Regards
Prabhu

Post script set to asian

i am trying to pring several pdf files and the post script is set to asian and i am unable to change the settings is there something i need to download or something so i can print these out?

Hi Chandu,
Have you find the solution finally? Have you tried Pavan's suggestion?
Sorry for my lacking of code and script. If your requirement still haven't been achieved, I suggest we can ask a question in Exchange Development forum and Script Center for more professional suggestion:
Microsoft Exchange Development forum
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Script Center
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Regards,
Winnie Liang
TechNet Community Support

Acrobat distiller 8.0 post script

Hello -
we currently updated our adobe7 to adobe 8 professional, and we have a distiller that we put in a "watch folder" where it would PDF"s all our tables ... after the updated to 8.0 the post script no longer works... can someone explain to me what we need to change or do to get this to work again...
attached the scrip below... I appreciate any input
% PostScript program for distilling and combining multiple PostScript files.
% When embedding font subsets, it is highly recommended you use this technique
% to distill multiple PS files so only one font subset is used for each font.
/prun { /mysave save def % Performs a save before running the PS file
dup = flush % Shows name of PS file being run
RunFile % Calls built in Distiller procedure
clear cleardictstack % Cleans up after PS file
mysave restore % Restores save level
} def
(//sqlf1/test/Applications/web/products/out/highlite.prn) prun
(//sqlf1/test/Applications/web/products/out/table01.prn) prun
(//sqlf1/test/Applications/web/products/out/table02.prn) prun
(//sqlf1/test/Applications/web/products/out/figure01.prn) prun
(//sqlf1/test/Applications/web/products/out/table03.prn) prun
(//sqlf1/test/Applications/web/products/out/figure03.prn) prun
(//sqlf1/test/Applications/web/products/out/table04.prn) prun
(//sqlf1/test/Applications/web/products/out/figure04.prn) prun
(//sqlf1/test/Applications/web/products/out/table05.prn) prun
(//sqlf1/test/Applications/web/products/out/figure05.prn) prun
(//sqlf1/test/Applications/web/products/out/table06.prn) prun
(//sqlf1/test/Applications/web/products/out/figure06.prn) prun
(//sqlf1/test/Applications/web/products/out/table07.prn) prun
(//sqlf1/test/Applications/web/products/out/figure07.prn) prun
(//sqlf1/test/Applications/web/products/out/table08.prn) prun
(//sqlf1/test/Applications/web/products/out/table09.prn) prun
(//sqlf1/test/Applications/web/products/out/table10.prn) prun
(//sqlf1/test/Applications/web/products/out/table11a.prn) prun
(//sqlf1/test/Applications/web/products/out/table11b.prn) prun
(//sqlf1/test/Applications/web/products/out/table11c.prn) prun
(//sqlf1/test/Applications/web/products/out/table11d.prn) prun
(//sqlf1/test/Applications/web/products/out/table11e.prn) prun
(//sqlf1/test/Applications/web/products/out/table11f.prn) prun
(//sqlf1/test/Applications/web/products/out/table11g.prn) prun
(//sqlf1/test/Applications/web/products/out/table11h.prn) prun
(//sqlf1/test/Applications/web/products/out/table12.prn) prun
(//sqlf1/test/Applications/web/products/out/table13.prn) prun
(//sqlf1/test/Applications/web/products/out/table14.prn) prun
(//sqlf1/test/Applications/web/products/out/figure11.prn) prun
(//sqlf1/test/Applications/web/products/out/table15.prn) prun
(//sqlf1/test/Applications/web/products/out/table16.prn) prun
(//sqlf1/test/Applications/web/products/out/table17a.prn) prun
(//sqlf1/test/Applications/web/products/out/table17b.prn) prun
% (//sqlf1/test/Applications/web/products/out/tableb1.prn) prun
% (//sqlf1/test/Applications/web/products/out/tablec1.prn) prun
% (//sqlf1/test/Applications/web/products/out/tablec2.prn) prun
% (//sqlf1/test/Applications/web/products/out/figc1_c2.prn) prun
% (//sqlf1/test/Applications/web/products/out/tablec3.prn) prun
% (//sqlf1/test/Applications/web/products/out/tablec4.prn) prun
% (//sqlf1/test/Applications/web/products/out/figc3_c4.prn) prun
(//sqlf1/test/Applications/web/products/out/tableh1.prn) prun
% INSTRUCTIONS
% 1. Locate all PostScript files to be distilled.
% 2. Make a copy of this file and give it the name you want to have as the prefix
% for the resulting file. For example, you could name this file MyBook.ps.
% 3. Include a line for each PostScript file to be run using the pathname syntax
% appropriate for the platform running Acrobat Distiller.
% Macintosh pathname synta

Helge,
I have Acrobat-Distiller 9 Pro on Mac Leopard.
1) If I use Distiller directly, it will show "pstack flush" messages as well as error messages
in its own window.
2) If I use Distiller via Acrobat and there are no problems, I can't see "pstack flush" messages at all.
3) If I use Distiller via Acrobat and there is a problem, I get error messages AND
"pstack flush" messages in a TextEdit window.
Its header tells me about a log file but I can't find the logfile.
Perhaps I am too new to Acrobat 9, and need some experimenting with its setup.
Miklos

Post Script 2UP trayswitch Command need

Similar Messages

Maybe you are looking for