Posting key 31 is ignored when processing Batch Input Map

Hi,
I have a problem when uploading an ascii file via RFBIBL00 to generate a batch input map. The map holds vendor and account bookings. The file looks like this:
0MapName     001sap_user            X/
1FB01                12062007YR0001120620076 EUR ...
2BBSEG                         31/         //            3381,00/...
2BBSEG                         40/         //            1111,00/...
The file uploads fine, the batch input map is created. Then I start to process the map. Transaction FB01 is filled with the necessary information. But instead of the starting with posting key 31 it starts with key 40. Field lengst, size of the 31 line is identical to the line with posting key 40 and 50 (expect for some fields like cost center, tax code,... which are not filled in the 31 line). For me it looks like that the line with the posting key 31 is totally ignored. oO
What could be the problem? Where to check?
Thank you for your help.
best regards
Hasan

problem solved,
thank you anyway

Similar Messages

Error for the fact table while processing the cube - attribute key cannot be found when processing

Please help as I am new to SSAS and this is urgent requirement. This is a MOLAP cube and below is the error that I am receiving when processing the cube. The cube is set to Prrocess Full. Several similar errors are popped up for various dimensions.
"Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'Fact_Table', Column: 'ID', Value: '1'. The attribute is 'Id'. Errors in the OLAP storage engine: The attribute key was converted to an unknown member because
the attribute key was not found. Attribute Id of Dimension: 17 - Ves - PoC Cont from Database: DB, Cube: IPNCube, Measure Group: iSrvy, Partition: Partition1, Record: 1."
Thanks in advance.

Thanks for the recommendations David.
It will be really great if you can clear some of my doubts:
To my information, all the dimensions need to be processed first and then the fact table will be processed.
So if the ID's are not present in the dimension tables, then it should not be present in the Fact table either.
Here we found null values in the dimension table and the ID's were present in the Fact table. What might be the reasons causing such situation?
Also how frequently the cube needs to be processed? Currently the ETL which processes the cube, is scheduled in a SQL Job Agent on hourly basis everyday.
Is there any possibilty that the cube might be under processing state and the SQL job for the next run getting executed trying to access and process the cube while it was still processing?

Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: performance_fact

Hi
We are using SSAS 2008 r2 and have a cube on our data warehouse, this has been running fine for quite a while now.
However it failed yesterday with the error message:
Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table:
'Performance_Fact', Column: 'accountexternalId', Value: '9474'. The attribute is 'External Id'."
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation."
An error occurred while processing the '2011' partition of the 'Fact' measure group for the 'DB' cube from the DB database.
Please can someone help me to resolve the error, I don't understand what it means.
Thanks

Hello,
The error means that you have a key in the fact data which don't exist in the related dimension. Ensure that the dimension is also processed so that it contains all used keys.
Olaf Helper
[ Blog] [ Xing] [ MVP]

A duplicate attribute key has been found when processing

Hi
When I process one of my dimensions it fails and I get the following error:
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'Customers', Column: 'DisplayName', Value: 'Stephen Grant'. The attribute is 'Display Name'.
I don't know if this is significant, but the attribute to which it is making reference was added through BIDS 2008 (the cube was originally created with BIDS 2005).
There are no duplicates of 'Stephen Grant' in the DisplayName column. Not that it should matter if there were as this attribute has a cardinality of Many, with an rigid attribute relationship directly to the dimension's key attribute. The Key column for the Display Name attribute simply refers back to the same (DisplayName) column in the table.
If I delete this record, or even just update the DisplayName field from 'Stephen Grant' to something else, the dimension processes just fine. I can't work out what it is about this record that is stopping the dimension from being able to process.
Can anyone help me figure out what's going on?
Julia.
P.S. I am using SSAS 2008 on Windows Server 2008

Hello there,
Does anybody has the complete resolution for duplicate entries data. I am showing the data below .
RegionName
BranchName
LoanOfficerFullName
PRIME - TEAM NORTHEASTERN
CALIFORNIA
ALONA HAYES
PRIME - TEAM WESTERN
RENO-DAMONTE RANCH
VINCENT LOTITO
PRIME - TEAM WARTON
NEWARK (Chicago)
CHRISTOPHER CLIFTON
PRIME - TEAM WARTON
GRAND HAVEN (West Michigan)
SEAN FOLEY
PRIME - TEAM SALMANS
LAWTON (Amarillo)
THOMAS STEARNS
PRIME - TEAM BARTON
CALIFORNIA
ALONA HAYES
PRIME - TEAM ROBINSON
LAS VEGAS
ANGELA DEATON
PRIME - TEAM ROBINSON
LAS VEGAS
HERMAN VANDER VELDT
PRIME - TEAM ROBINSON
LAS VEGAS
DAWN ROBINSON
PRIME - TEAM ROBINSON
LAS VEGAS
MICHAEL BIRK
Here i have the Hierachies in order LoanOfficerFullName-->BranchName-->RegionName. Loan Officer is the lowest level. I had created another column and make that unique entries so that I could make the unique column as the Key and the hierachies i have linked with the key column value. The issue
is that i am getting the expected result in OLAP from data side. But the data is not getting aggregated like Team Barton is coming twice though for the Dimension I make IsAggregatable property to True. If anybody can help me I will aprecciate. If any other clarification need I can provide.

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

Errors in the OLAP storage engine: The attribute key cannot be found when processing

this is the absolute worst error message in all of computing. I despise it. Here is my situation.
SSAS 2008 R2.
I have one dimension. I have not even built my cube yet. only a dimension. I am trying to process it. I can process it when I only have a single attribute, they key. it is a composite key. When I add a new attribute (integer),
I get the error message. There are no null values. There are no blanks as its an integer.
The attribute key cannot be found where? I'm processing the dimension you idiot. there is not even a cube yet in order for any key to be found or not.

Hi Baracus,
According to your description, you get the error "Errors in the OLAP storage engine: The attribute key cannot be found when processing" when processing your cube, right?
Generally, the detail error message should like
Table: 'dbo_FactSales', Column: 'ProductID', Value: '1111'. The attribute is 'Product ID'
The above error explains that the fact table named "FactSales" contains column ProductID with value "1111" but the same ProductID is not present in your dimension table. There is a primary key - foreign key relationship exist
between the ProductID column of dimension table and fact table named "FactSales" and cube is unable to find ProductID with value 1111 in the dimension table.
At this time, what we need to do is to check either your dimension and fact table contains the value mentioned in the error message ( Value: '1111' in the above example). Here are some links about troubleshoot this issue, please see:
http://www.businessintelligence-solutions.com/ssas-typical-error-attribute-key-processing/
http://www.youtube.com/watch?v=5O7IAjvtAF4
If this is not what you want, please provide us more information about you issue, so that we can make further analysis.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Errors in the OLAP storage engine: A duplicate attribute key has been found when processing

Hi dear MSDN Community,
I am facing a problem while processing a cube with a customer hierarchy as follows:
Global Account --> Main Customer --> Master Customer --> Customer
The data comes from a flatted parent child table, that is, I create an extra column for every level of the hierarchy in the customer view. If a level is empty, then the value is filled with the previous value. Then I can use the property:
HideMemberIf = OnlyChildWithParentName for the intermediate levels (Main and Master Customer)
HideMemberIf = ParentName For the leafs (Customer)
HideMemberIf = never for the root (Global Account)
Consider this example:
Then, for the root level I am using as the key the fields in yellow in order to avoid duplicates. However, I am getting the error message "Errors in the OLAP storage engine: A duplicate attribute key has been found when processing" while processing.
I analyzed the query that SSAS issues to the server (select distinct ....) and I think it should work but it is still failing.
I had similar problems with the intermediate levels but I was able to solve it using a similar procedure.
Any help will be appreciated.
Kind Regards.

When are you having this error? While processing the dimension or during cube processing?
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Editing is terminated message when running batch input error using lsmw

Any Idea why would I get the info message like
"Editing is terminated message when running batch input error using lsmw"
please suggest where to look at.
Thanks,
Edited by: mark_yellow mark on Jul 1, 2008 3:27 AM

Hi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik

Manual Bank Reconciliation Statement - Processing Batch Input Session

Hi experts,
After processing FF67 transaction, while processing batch input session, system expecting manual clearing of open items in bank sub accounts. If I manually clear, then only it is processing further till end of all transactions in batch input session. Can any one suggest, how to avoid this manual intervention in Batch Input Session, system should map cheque number, amount and clear automatically?
suggestions will be rewarded.
Regards
Sarma BH

Hi Sarma
In FF67 transaction code please select bank postings only check box
If thr anything u want tell me
Please award points if it is useful
Regards
Raju.k

What are the problems in processing batch input sessions?

hi,
What are the problems in processing batch input sessions? How is batch input process different from processing on line?
regards.

sorry, question resolved.

Tracking Deleted Batch Input Map from SM35

Dear All,
I want to find the details of deleted Batch Input Maps from SM35. e.g. if some one deletes a Batch Input Map from SM35 transaction then I need to find the details of the user along with date and time.
I tried finding the table but I could not. Please let me know if this is possible some way.
Regards,
lalit

AFAIK this information is not stored in SAP database
(Check FM BDC_OBJECT_DELETE and include LSBDCF01 form DELETE_SESSION of FG SBDC)
You may ask system to store it in DBTABLOG "Log Records of Table Changes"
- (SE11) Activate the general logging for the table - the technical setting of
the table needs to be adjusted to "Log data changes". To check whether
it is activated for a table, use transaction AUT01.
- (RZ10/RZ11) You may also be required to set the profile parameter rec/client on.
Regards,
Raymond

Batch input maps

How to find the list of all the deleted batch input maps for a specified time period?
I know it should be in sm35 transaction, but I am not able to find where.

.......................

How posting key is taken up when we generate accounting document

hi ,
i am trying to bill a customer using billing type RE which is credit for returns. but when i generate posting document instead of crediting the customer account its getting debited ie) it is taking up the posting key 01 instead of 11 .
how this posting key is determined when we generate accounting documnet .
if u have any questiin or clarification kindly ask me.
thanks

hi,
start with checking OBXW, here you check the customer item outgoing invoice, where you will find posting keys assigned for debit and credit. Might be its configured wrongly here.
Second, Check T.code OB40 this is where we tell what type of accounts are affected with this posing key and is the effect a debit or credit. You have radio buttons for it.
But remember these are all standard SAP config settings and i guess there would really be a need to change them here if not while practising.... Make the settings as required and do consult an FI guy on this.
regards
sadhu kishore

How to process batch input session through program

Hi Friends,
I am getting 5 batch input sessions in SM35,but I want to process these all sessions through program without going to SM35.
How it is possible through Program?
Please Guide me!
Thanks,
Yogesh

Hi,
It's the report to run the batchinput sessions.
When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
For example you can use it in the same program where you create B.I.:
Here the code to fill the structures of FI batch input
standard....
...here it creates session...
SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
WITH CALLMODE = CALLMODE AND RETURN.
....here it runs session....
SUBMIT RSBDCSUB WITH MAPPE = P_NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
TO SAP-SPOOL
LIST NAME P_NAME
LIST DATASET P_NAME
COVER TEXT P_NAME
NEW LIST IDENTIFICATION ' '
EXPORTING LIST TO MEMORY
AND RETURN.
regards,
Shiva.

LSMW : error message when ru batch input

Hi,
i want to integrate some FI docs with LSMW, when i run the Batch input i have this error : Choose valid function.
Any idea to solve that.
full points will be assigned.
Regards

Hi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik

Posting key 31 is ignored when processing Batch Input Map

Similar Messages

Maybe you are looking for