Posting messages from an EJB
Hi!
I have an EJB (stateless session bean) that should post messages to a Queue.
The EJB have container-demarced transactions and transaction-attrib set to
REQUIRED. I can't seem to get the messages posted though, they are kept in
the pending state when looking in the console. If I choose to create
QueueSession without transactions they get posted fine but I need to post to
rollback in case the bean should.
Could anyone shed some light on this?
/Lars-Fredrik Smedberg
Short answer :) but the only resonable thing left for me to think of...
thanx again for the help!
/Lars-Fredrik Smedberg
"Tom Barnes" <[email protected]> skrev i meddelandet
news:[email protected]...
>
> Lars-Fredrik Smedberg wrote:
>
> > Hi!
> >
> > I didnt use a transacted session but I forgot to turn
> > user-transaction-enabled on when configuring. This is a bit confusing
> > though, is the JMS provider looking at the container-managed transaction
by
> > the EJB container as a User-Transaction?
>
> Yes.
>
> >
> >
> > Thanx
> > Lars-Fredrik Smedberg
> >
> > "Tom Barnes" <[email protected]> skrev i meddelandet
> > news:[email protected]...
> > > I think it is likely you are using a "transacted" session, which is
not
> > what you
> > > want (yes
> > > this is anti-intuitive). To get a JMS client to participate in the
tran,
> > use a
> > > connection factory configured
> > > with "user-transactions-enabled", and a session with "transacted" set
to
> > false.
> > >
> > > See the JMS FAQ for info on JMS and transactions.
> > >
> > > Tom, BEA
> > >
> > > Lars-Fredrik Smedberg wrote:
> > >
> > > > Hi!
> > > >
> > > > I have an EJB (stateless session bean) that should post messages to
a
> > Queue.
> > > > The EJB have container-demarced transactions and transaction-attrib
set
> > to
> > > > REQUIRED. I can't seem to get the messages posted though, they are
kept
> > in
> > > > the pending state when looking in the console. If I choose to create
> > > > QueueSession without transactions they get posted fine but I need to
> > post to
> > > > rollback in case the bean should.
> > > >
> > > > Could anyone shed some light on this?
> > > >
> > > > /Lars-Fredrik Smedberg
> > >
>
Similar Messages
-
Error getting application exception message from client EJB 3
Hi, somebody nkow what is the error?
I have this simple session bean deploy in a jboss 4.0.5 GA application server
My interface:
package server.ejb.usuarios;
import javax.ejb.Remote;
@Remote
public interface Prueba {
public void getError() throws Exception;
}My Session bean implementation:
package server.ejb.usuarios;
import javax.ejb.Stateless;
import server.ejb.usuarios.Prueba;
public @Stateless class PruebaBean implements Prueba {
public void getError() throws Exception {
throw new Exception("Mensaje de error");
}Simple, i can deploy this bean on my application server, now i have this client code:
package clientold;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import server.ejb.usuarios.Prueba;
public class MainPruebaError {
* @param args
public static void main(String[] args) {
Context ctx;
try {
ctx = getInitialContext();
Prueba pruebaSession = (Prueba) ctx.lookup("PruebaBean/remote");
pruebaSession.getError();
} catch (NamingException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch(Exception e){
System.out.println("Get error from server: " + e.getMessage());
e.printStackTrace();
private static Context getInitialContext() throws NamingException {
Properties prop = new Properties();
prop.setProperty("java.naming.factory.initial",
"org.jnp.interfaces.NamingContextFactory");
prop.setProperty("java.naming.provider.url", "127.0.0.1:1099");
prop.setProperty("java.naming.factory.url.pkgs", "org.jboss.naming");
return (new InitialContext(prop));
}and my client catch the exception but i can�t get the correct exception message. I need pass custom message from my server to my clients and wrap it in a exception, but when i run this example got the next output:
Get error from server: [Ljava.lang.StackTraceElement;
java.lang.ClassNotFoundException: [Ljava.lang.StackTraceElement;
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at org.jboss.remoting.loading.RemotingClassLoader.loadClass(RemotingClassLoader.java:50)
at org.jboss.remoting.loading.ObjectInputStreamWithClassLoader.resolveClass(ObjectInputStreamWithClassLoader.java:139)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1624)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1323)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at org.jboss.remoting.serialization.impl.java.JavaSerializationManager.receiveObject(JavaSerializationManager.java:128)
at org.jboss.remoting.marshal.serializable.SerializableUnMarshaller.read(SerializableUnMarshaller.java:66)
at org.jboss.remoting.transport.socket.SocketClientInvoker.transport(SocketClientInvoker.java:279)
at org.jboss.remoting.RemoteClientInvoker.invoke(RemoteClientInvoker.java:143)
at org.jboss.remoting.Client.invoke(Client.java:525)
at org.jboss.remoting.Client.invoke(Client.java:488)
at org.jboss.aspects.remoting.InvokeRemoteInterceptor.invoke(InvokeRemoteInterceptor.java:41)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
at org.jboss.aspects.tx.ClientTxPropagationInterceptor.invoke(ClientTxPropagationInterceptor.java:46)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
at org.jboss.aspects.security.SecurityClientInterceptor.invoke(SecurityClientInterceptor.java:40)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
at org.jboss.ejb3.remoting.IsLocalInterceptor.invoke(IsLocalInterceptor.java:77)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
at org.jboss.ejb3.stateless.StatelessRemoteProxy.invoke(StatelessRemoteProxy.java:102)
at $Proxy0.getError(Unknown Source)
at clientold.MainPruebaError.main(MainPruebaError.java:21)What is the problem??, i must see on the output
Get error from server: Mensaje de errorbut i have :
Get error from server: [Ljava.lang.StackTraceElement;why???, is only a simple application exception and don,t work, somebody can help me??
i have tried to use an interceptor class for get the exceptions and work, but without interceptor, dont work
thanksI can resolve this problem change the JDK version used to develop my clint application and to run the jboss application server.
Current, in JBoss 4.0.5, the JDK requirement is JDK 5, and i was using JDK 6. -
Issue in Posting Messages from XI to MDM Console
Helloo Experts,
I am trying to Post the Message from XI to SAP MDM Console. When I am trying to post a test message it appears success in XI and it is not visible in SAP MDM.
But, the logs of MDM shows the Namespace and Interface were not registered.
Can any one tell me how I can register my Namespaces in the SAP MDM console?
From some of the previous topics I can understand that to register any interface I need to have the below details
Namespace :
Interface :
Bean :
Method :
I can provide the Namespace and Interface which I am using to post the messages to SAP MDM console.
Can any one tell me where do I can find the Bean and Method of the particular Inbound interface?
Cheers!
RamHello,
I think I clearly didn't explain my problem.
My Scenario is to post the message from SAP XI to one more External SAP system using HTTP cc (RFC destination)
Unfortunately that External System has been built on SAP MDM.
As per XI it is picking the message from the Source and successfully sending to the Receiver.
But at Receiver side we donu2019t see any message. But we can see certain Logs stating that
Error in processing the Inbound Message Exception:-Unable to Process the Message with Message ID u201C*********u201D with u201CNameSpace#Inbound InterfaceNameu201D is not Registered.
I want to know how to register the namespace and the Interface name of XI system ( my own system ) in External SAP System.
Cheers!
Ram -
Problem posting message from adapter engine to IS
Hello,
We experience the next problem. We use JMS sender adapter to post message into XI. Message comes into the adapter engine and tries to post it into integration server. http://<host>:8000/sap/xi/engine?type=entry
When posting we get the (very generic) error:
Received HTTP response code 500..
The Adapter engine does a retry every 5 minutes.
After the 3th retry most of the status of the message in the adapter engine is set to NON_DELIVERED.
However for what ever reason sometimes the 2nd or 3th time the message does get processed to the IS.
Is there anyone who experienced similar problems or does anyone know a solution for this.
tnx
EmileHi,
Is this the problem with JMS adapter or with any other Adapter.
<b>8000</b>, is this the same port in smicm-->services. B'cos sometimes people might have a different instance number even.
Cheers,
Siva Maranani. -
How to post message from SAP to solution manager
Dear Friends,
We have configured solution manager service desk and the users were able to send messages so that we can view it in solman ITSM.
Now we want to bifurcate the messages from different people, hence we woule like to use of Problems in incident management of solman.
How a end user can create a message so that it comes and fall in problems folder of incident management,
Normally create support message from SAP will make the message to be visible in incidents of solman ITSM, but we want the message to fall in problems section of ITSM in solman.
Please help.
Thanks
SureshHi,
In 7.1 we do have dedicated services as Problem management, with the transaction type SMPR. you can create ZMPR and proceed similar to SMIN ( incident) in ITSM.
also refer here Problem Management in SAP Solution Manager 7.1 - Part 2
Thanks
Jansi -
Email messages from my personal email account are being posted (copied) to SMS messages. I have a new cell device (swtched from Droid to iPhone) and this is happening on the new device also. The copy/forward to SMS is NOT being initiated by my email provider, and not by Gmail. How do I end ûVerizon's forwarding my personal email to SMS?
Thanks.Maybe I'm missing something but how can Verizon have control over your personal GMail account? Sounds like you do have your email set up to forward to sms.
I have certain emails that are forwarded to me as SMS but that is an option that is enabled on the email side of things and is independent from Verizon. -
While Posting IDOC from XI to R/3 Message Type needs to be changed
We are doing mapping IN XI. For one condition we want Message Type to be ORDERS and for one condition we want Message Type to be ORDERSCHG
when posting IDOC from XI to R/3.
Pls revert anybody asap.
RegardsHi,
>>>>It means I need to create two Interface Mappings for the same message mapping and then I can use the Interface Determination . Am I right.
no, you need two message mapping
and two interface mappings
file - orders.orders05
file - ordrchg.order05
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Problem in Posting Messages to MDM from SAP XI
Helloo Experts,
First of all I want to tell you this is my first day working with SAP MDM. I donu2019t even know the basics of MDM.
I am trying to Post the Message from XI to SAP MDM Console. When I am trying to post a test message it appears success in XI and it is not visible in SAP MDM.
But, the logs of MD shows the Namespace and Interface were not registered. Can any one tell me how I can register my Namespaces in the SAP MDM console?
From some of the previous topics I can understand that to register any interface I need to have the below details
Namespace :
Interface :
Bean :
Method :
I can provide the Namespace and Interface which I am using to post the messages to SAP MDM console.
Can any one tell me where do I can find the Bean and Method of the particular inbound interface? I mean do I need to deploy the any files in MDM server so that it can understand
Cheers!
RamHi Ramachandra,
I am trying to Post the Message from XI to SAP MDM Console. When I am trying to post a test message it appears success in XI and it is not visible in SAP MDM.
1.But, the logs of MD shows the Namespace and Interface were not registered. Can any one tell me how I can register my Namespaces in the SAP MDM console?
2.I am trying to Post the Message from XI to SAP MDM Console. When I am trying to post a test message it appears success in XI and it is not visible in SAP MDM.
3.But, the logs of MD shows the Namespace and Interface were not registered. Can any one tell me how I can register my Namespaces in the SAP MDM console?
firstly your Scenario be like this:
R/3-(Proxy OR IDOC)->XI (MSG-MAPPING) where sender side having R/3 structure should mapped with MDM Receiver side (Repository structure) --->MDM (File Adapter) which will ping at the ready folder of your inbound Port for your maintain Remote system.
1. you dnt need to maintain NameSpaces in the MDM console afterall. you need to create Remote system, inbound port(where you define what kind of file it accept (Xml, Excel etc).
2. For this firstly you need to Map your both source and target structure. Apart you also should need to have a save map in MDM Import Manager using this map( inwhich you map fields and values of your source file to target MDM Repository Structure) only then you could able to insert Data into MDM Data Manager.
3. As i said above you dnt need to maintain NameSpaces in the MDM console afterall. Also in File as Adapter comm channel you define FTP sever IP machine, path of the inbound Ready folder .
i think you just start with Basics of MDM tools now:
SAP Reference guides:
MDM Console -- http://help.sap.com/saphelp_mdmgds55/helpdata/en/88/9f9c427055c66ae10000000a155106/frameset.htm
MDM Import manager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/120367f94c3e92e10000000a1553f6/frameset.htm
MDM DataManager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
MDM Syndicator --http://help.sap.com/saphelp_mdmgds55/helpdata/EN/43/5fe0e8a55f5f6be10000000a1553f6/frameset.htm
Hope it will Help you,
Rewards if Useful....
Mandeep Saini -
Sending XML messages from server to client using POST method
Dear everyone,
I have a simple client server system - using Socket
class on the server side and URLConnection class on
the client side. The client sends requests to the
server in the form of an XML message using POST method.
The server processes the request and responds with
another XML message through the same connection.
That's the basic idea.
I have a few questions about headers and formats
especially with respect to POST.
1. In what format should the response messages from the
server be, for the client? Does the server need to
send the HTTP headers - for the POST type requests?
Is this correct?:
out.println("HTTP/1.1 200 My Server\r");
out.println("Content-type: text/xml\r");
out.println("Content-length: 1024\r");
out.println("\r");
out.println("My XML response goes here...");2. How do I read these headers and the actual message
in the client side? I figured my actual message was
immediately after the blank line. So I wrote
something like this:
String inMsg;
// loop until the blank line is through.
while (!"".equals(inMsg = reader.readLine()))
System.out.println(inMsg);
// get the actual message and process it.
inMsg = reader.readLine();
processMessage(inMsg);But the above did not work for me. Because I seem to
be receiving a blank line after each header! (I suppose
that was because of the "\r".) So what should I do?
3. What are the different headers I must pass from
server to the client to safeguard against every
possible problem?
4. What are the different exceptions I must be prepared
for this situation? How could I cope with them? For
example, time outs, IOExceptions, etc.
Thanks a lot! I appreciate all your help!
Georgehello,
1) if you want to develop a distributed application with XML messages, you can look in SOAP.
it's a solution to communicate objects distributed java (or COM or other) and it constructs XML flux to communicate between them.
2) if it can help you, I have developed a chat in TCP/IP and, to my mind, when you send datas it's only text, so the format isn't important, the important is your traitement behind.
examples :
a client method to send a message to the server :
public void send(String message)
fluxOut.println(message);
fluxOut.flush();
whith
connexionCourante = new Socket(lAdresServeur, noPort);
fluxOut= new PrintWriter( new OutputStreamWriter(connexionCourante.getOutputStream()) );
a server method in a thread to receive and print the message :
while(true)
if (laThread == null)
break;
texte = fluxIn.readLine();
System.out.println(texte);
that's all ! :)
If you want to use it for your XML communication, it could be a good idea to use a special message, for example "@end", to finish the server
ex :
while(true)
if (laThread == null)
break;
texte = fluxIn.readLine();
// to stop
if (texte.equals("@end"))
{break;}
processMessage(texte );
hope it will help you
David -
Sent Messages from iPad Appear as Posted Message
Hi All:
We have a single user (out of about 50 Mobility users) who is having an issue with sending messages from her iPad2. Whenever she sends or replies to an e-mail from the iPad2, the message is never sent to the receipient(s). Instead, a blank "posted message" appears in her inbox (both on the iPad and in her Groupwise inbox) originating from herself. Nothing appears in sent items on her Groupwise client - the only indication that anything was sent is the blank posted message that appears in her inbox. If she sends a message from the Groupwise client, the message sends perfectly. Contacts, calendars, and the inbox are synced to the iPad perfectly; it's just replying/sending that generates this posted message in her inbox.
We've tried removing the user from GWMobility and re-adding, running "Analyze/Fix Databases" from ConsoleOne on the user, and running a structural rebuild, but still have the same issue. We've also tried another iPad and were met with the same results.I apologize if this was posted in the wrong area. I just found the DS: Mobility Pack forums and will repost there.
-
Challenge: call local ejb from remote ejb on weblogic 9.2
Hi ALL,
How do I call to local ejb from remote ejb object. The jar file is deployed on weblogic server 9.2, if you want get it http://geocities.yahoo.com.br/lindembe/BEAProject.jar and the source code are http://geocities.yahoo.com.br/lindembe/BEAProject.zip. It is a sample app with two ejb that works so good on JBOSS, JOnAS, but BEA Weblogic.....
The complete problem you watch http://forum.java.sun.com/thread.jspa?threadID=768718&messageID=4387570#4387570
or
http://forums.bea.com/bea/message.jspa?messageID=600043148&tstart=0Your code in SigemFacadeBean should just do:
InitialContext ctx = new InitialContext();
when you lookup the local EJB. (This will work on all app servers. There's no need to put an app-server specific intial context factory in your code.)
Also, you can remove the jndi-name setting for the local ejb from your weblogic-ejb-jar.xml. jndi-name is only applied to remote ejbs.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Mail not getting all messages from server and other strange behavior
Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
BozHello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there. -
Cannot Delete SMS Text Message From My Blackberry Curve -
I cannot delete a SMS text message from my Blackberry Curve. What are some options I can try that would remove the text message?
you already reset the device taking out the battery? if yes View your Saved Messages folder and see if it is also there
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
Hi Guys,
I have a question regarding mail management.
Here is my situation:
I have a GMX e-mail account; when I manage my e-mail on a computer (any computer), I always use the web-based e-mail straight from the website. I have this e-mail address configured in Mail on my iPad as an IMAP account. When I check my mail via iPad, it shows me my current inbox, but if I delete messages from iPad, it moves the message to trash, but does not reflect this on the server. So when I go to login to my account from a regular computer, any e-mail(s) that I have deleted through my iPad are still in my inbox at the GMX website.
On my iPad, I have turned Push to Off and I have Fetch set to manual, whenever I launch Mail. I have tried hitting the refresh on my iPad after I move a message to Trash, and my iPad's Mail settings are set to move deleted items to the "Trash" folder on the GMX server. Sending and receiving e-mails are no problem.
What am I doing wrong here? I am tired of deleting messages on my iPad (such as spam) and then having to go onto a computer and login to GMX and delete them again.
Btw, same exact issue on my iPhone with exact same e-mail settings.
Thanks,
EmileThanks for the tip, Ralph.
I just went over to the GMX website and went to their support forum and apparently this is a known problem when accessing e-mail through an IMAP or POP3 e-mail client. A post was made at the end of August saying they are aware of the problem and are trying to fix it.
I've had this issue with my GMX account since my first-generation iPhone and they've just realized it a month and a half ago. I wonder how long it's going to take for them to repair the issue, sheesh!
I will mark this thread as resolved but since I just have to wait for GMX to fix the problem on their side. At least we got to the bottom of this, thanks for the help guys.
Message was edited by: MrElussive -
How can I export text messages from Companion?
Dear all!
I have a number of old text messages which I would like to keep for the future. They are already erased from my tiny phone memory (I have an old SE "Cybershot"). So, right now they are only accessible via PC Companion. But: This only works if I connect my phone. If I launch the "text message synchronizing menu", the software asks me to plug in a phone, if I cancel, I'm back to main screen. However, I don't want to keep my old phone lying around for the next years just in case I want to browse through my old text messages some day.
Is there a way to export my these old messages or can I find them on my hard drive?
This might have been covered in some of the other threads, but I couldn't find a relevant post. I understand that "my Phone Explorer" allows to export text messages from the phone, but since mine are somehow hidden inside Companion, I am at a loss.
Thanks for your help!
JanAhem, yes, that works Didn't think of this possibility at all...
You can save indivual messages or put all the highlighted ones into one single text document. It's not very comfortable to read, but it certainly does the job!
Thank you very much!
Maybe you are looking for
-
I suddenly have two flashing lights on my keyboard by the caps lock key and over the end/pg up key.
I encountered a problem waking my laptop (Pavilion dv7-1270us) this morning. At first it would not wake up and had to do a hard reboot. Now I have two flashing lights on the keyboard -the caps lock light and the one over the end/pg up keys over the
-
The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name
-
Parameters in the Body of the Query.
Hi, I am really finding my self in dilemma. I am doing a report and I ended up with a query having three unions. I am assigning the creation_date as one of my condition, for example: AND TRUNC(Creation_Date) Between Date_From and Date_To Is there a w
-
Trial version of Flash CC not showing new menus
Hello, I am missing some menus from my 30-day trial version of Flash CC Professional The HELP > About Flash menu displays "Adobe Flash Professional CC, Build 14.0.0.110. But the menu does not display the FLASH menu item. Do I have the correct vers
-
CF data file missing on FCP project files
Every time I open a saved project file on Final Cut Pro, it says CF data file missing on my FCP project files. Files seem to be in constant frames folder but all black and not highlighting. suggestions? I was saving things on a MyBook studio external