Powerbook's dead after Hard DRIVE is replaced.

Please help. I was about to sell my 17 in since I bought the mac book pro and I wanted to keep my 100 gig and put the original 80 back. I opened it (following mac fixit guidelines) but after closing everything. I have NO power. I re did every connection including putting the 100 gig drive back, still no luck When I hit the power button I dont' hear anything. Machine doesn't make any noise and is totally dead.
The trackpad connection (I think that's what it is) the one under the ram which you have to remove before you open it seems loose.
Could that be doing it ? The plastic connector there came off and its now just resting in the groove.
What can I do? Is the machine a total loss now but for parts?
It was working totally fine till an hour ago.
Please Please help.

Download/install the trial versions, then activate them with your Adobe ID.

Similar Messages

Serial Number does not work after hard drive was replaced

My hard drive was replaced and now FCP 7 does not work even when I type in the correct serial number. Help please. Thanks

You posted your question in the Final Cut Pro X forum.
You should repost it in the Final Cut Studio forum.

How to re-download Ps and Lr after hard drive is replaced

I have license for CC on two computers. Had it installed on my PC and Mac. Hard drive for the Mac was replaced. How do I re-download my products?

Download/install the trial versions, then activate them with your Adobe ID.

HT3275 Unable to backup using Time Machine after hard drive was replaced

I recently had my hard drive fail and I had the hard drive replaced. I restored everything from my Time Capsule without a problem. Now when I go to backup with the Time Machine, it stalls. It states it is "backing up: 12.2MB of 227GB" for the past four hours. I have attempted to restart the backup and have had the same thing happen. Any suggestions? Thanks!

If you have restored the backup, did you correctly inherit the old backup when you setup TM again??
See Pondini on inheriting backups. B5 and B6
http://pondini.org/TM/Troubleshooting.html
Install the widget.. A1
Do a full reset of TM.. A4
Do a verify of the disk and the backup.. A5.
I strongly recommend you simply start over.. this happens with TM sometimes.
Archive off the old backups if you still want to keep them.. no bad idea in case there is something still to transfer.
In the airport utility erase the hard disk of the TC.. and then start again.
Make sure you do at least the first backup by ethernet as it is many times faster than wireless.

Built in iSight is no longer working after hard drive was replaced

I have a 2008 MacBook Pro that has served me well up until recently.
I had my hard drive replaced about a week ago and now I've noticed that my built in iSight is no longer working.
It doesn't work with any application or on any user.
The green light no longer comes on.
I noticed this the other day on my gmail account, no longer showing the camera icon next to my name when i'm online.
So I tried pulling it up on photobooth and ichat etc...no luck.
What should I do?
Please help.
Thank you.

Take your MBP back to whoever replaced the drive and ask them to resolve the rest of the problem.
(Before taking it in, make a current backup if you have added ANYTHING since you got the new drive)
If you want to try some things on your own before you take it back for professional resolution, here are a couple of relatively simple things you can try:
Reset the SMC. Instructions here: http://support.apple.com/kb/HT3964
Troubleshoot Flash as Adobe Suggests: http://kb2.adobe.com/cps/908/cpsid_90893.html

IWork won't work after hard drive is replaced

Recently I had my hard drive replaced. Now my iWork apps won't work. Pages asks for a serial number when it's opened. That number was long ago registered, lost and forgotten! Isn't there a place where I can find my old serial numbers and use them to reauthorize Pages, Numbers and Keynote?

Go here. You may need to use the chat option:
Activation & Deactivation Help

Reinstall Photoshop 11 after hard drive failure & replacement

Suffered a hard drive failure last week and lost everything. I need to reinstall Photoshop Elements 11.

Download the trial from http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Follow the Very Important Instructions on that page first BEFORE you click the download links.
Enter your serial number to license the software on your computer.

IPhoto backups won;t appear in Time Machine after hard drive was replaced

Please help me with this question. Not sure I posted it in the right thread to start with:
http://discussions.apple.com/thread.jspa?threadID=2135715&stqc=true

Hi Nidan,
Thanks for digging out the support article!
Sadly it didn't help me either.
Indeed, as Murphy may have it, I think several things might have gone wrong at the same time for me.
My Setup:
Mac Mini called "chief" with 10.5.2, two WD MyBook 1TB drives connected via FW and mirrored with RAID-1.
Mac Book Pro called "tiff" with 10.5.2, connects to mini via ethernet and AFP for Time Machine.
Both machines have been backing up since November and I have been successfully recovering files on both machines as needed.
Until now.
What has happened:
First, one of the MyBooks died, was sent in for repairs and I received a replacement yesterday. The RAID rebuild is still running (takes about 30 hours for 1TB). Even so, the file system is visible, can be mounted etc.
Today I installed Leopard on a third firewire disk, connected to the mac book pro (for testing). I called this system "leopard-test" and told it to back up also, assuming I would get a "leopard-test" sparse bundle. Sadly this attempt crashed so I turned off time machine on the test system.
Now I'm using the original Mac Book Pro system (tiff) and the time machine preferences still point to the Mac Mini disk, still report the oldest backup as being in November 2007 but when I try to recover a file, no history is shown at all.
Indeed, time machine isn't even mounting the backup image any more.
I can manually mount the image and all of the archives back to November seem to be there... it's just that time machine doesn't seem to recognise the image any more.
Any help greatly appreciated! (I REALLY don't want to lose the stuff I've been doing lately! Since I can get at the files manually, I'm thinking of renaming the original archive and starting a new one - at least then I know the old data won't be corrupted (further?))
Any help greatly appreciated!!!

How to get Microsoft word, excel, powerpoint back on macbook after hard drive was replaced??

Lost the disc but need it back on my computer...

Hi,
You can refer to the link that Stefan provided, go to Order backup for Office on a Mac.
If this doesn't help, since we support Office for Windows in this forum, I suggest you post the question in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

HT1751 My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used). ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!

This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2

How to reinstall iWork '09 (part of Mac Box Set) after recalled mac hard drive was replaced?

imac 27" late 2009 OSX 10.8.2
Have spent a week trying to get iwork opened ( use Pages for my business ) - read almost every support, tried all options to no avail - earlier restore using Time Machine after affected Seagate hard drive was replaced no charge.
The error message reads: "Pages cannot be opened because of a problem. Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Click Report to see more detailed information and send a report to Apple."
Can any one confirm a simple ...
1)
2)
3)
4) answer
or am I better to $buy another box??
Unfortunately I find the multitude of support suggestions too beside the point - yet to sight a sound solution!

Hi Kappy -
Yes, thought you had the answer .... but .... NO !!!
I purchased Pages to upgrade but no go .... alas .... message, should have guessed it? .... yes -
'Pages already installed on this computer. Choose Software update from the Apple menu to check for available updates !'
HELLO ? I have no software updates or even record of purchase.
I now realise this matter will never ever be resolved .... soooooo .... plan B -
1) I will sue APPLE for $US80k because my business is based around PAGES and has lost approx $US15k to date over 31/2 weeks - unfortunately, this loss of opportunity will quickly balloon with 2012 closing.
2) If recompense is not forthcoming by negotiation I will initiate a campaign on all Social Networks to let the world know that Apple may sell you an unreliable toxic hard drive which will cost your business a truck load of money .... they openly admit that some of their 1TB Seagate hard drive's ( probably millions ) sold in an historic space were corrupted and should be replaced free of charge. Hey, that's the worry free bit ! I employ people who need to be paid! I didn't order their belighted hard drive!!
3) Failing which I will link with another operator and retain my campaign for $repayment from APPLE.
Accumulate.

PowerBook G4 (Gigabit Ethernet): Hard Drive Replacement Instructions

Hi, the instructions indicate the hard drive is replaced via removal of the back 8 screws with a torx t8. However, on mine the screws are way smaller, and none of my torx fit it. they are really small and look like + that.
ANy ideas?

You seem to have bad instructions. Use these from iFixit:
http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-15-Inch-1-5-1-67-BT-2-0-LR/Hard- Drive-Replacement/64/8/Page-1
You need a #0 Philips and a 1.5mm hex, despite what iFixit says on the first page. They correct themselves later on. No Torx involved.

Missing iphoto files after hard drive replacement

I am working with iMac (27 inch, late 2009) running OS X Yosemite. Run time machine to an external hard drive.
Earlier this month, the hard drive crashed and had to be replaced. Before the hard drive crash, the computer was not using Yosemite. The iMac's hard drive was replaced and a full time machine restore was done. Everything was there except for all photos in ten very recent events in iPhoto. The event is named correctly "Halloween 2014," but there is no thumbnail picture. When I click into an event, the thumbnails for all the photos are are gray with white dotted lines around them. I repaired the thumbnails, and that didn't solve the problem.
I noticed in one (only one) event album, when I click into it, I can see the images at the bottom (in the teeny thumbnails) but when I click on them, I get the exclamation point in a triangle.
I have a few fairly basic questions -
1. When looking for an original photo file in Finder, is the correct way to do it by "Showing Package Contents" when the iPhoto icon is selected in iPhoto? This is the first time I've had to dig around to make sure the actual photo is on the computer. What is the organization default on the folders? Upload date? It doesn't make much sense to me yet.
2. Is it worth it to even bother doing this? Should I just either a) repair permissions, b) repair database or c) rebuild database?
3. What do a-c even mean?
4. If I do a-c, am I in danger of loosing photos I've uploaded since the hard drive install? I have some very precious professional family photos that I have on the computer now that I am deathly afraid of loosing.
Thanks!

1 - best to stay out of the iPhoto library - it is very complicated and easy damaged
2 - Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
3 - ?
4 - see 2 - step one is backup the Photo libreay in case a rare prblem does cause an issue
LN

Cannot restore from Time Capsule after hard drive replacement (recall)!

Hard drive was replaced on a recall from Apple. I have spent weeks on the phone with Applecare whose conclusion now is that a WD drive I had connected about a year ago (and which was disconnected and software uninstalled) has corrupted the files on the Time Capsule (?) Anyone heard of that?
I am a photographer and all my photos are there (?) The capsule appears to be quite full.
Anyways Apple won't pay for recovery since they say 3d party software caused the issue.. WHY DO THEY SELL THOSE DRIVES IN THE STORE THEN?
Solutions anyone?

See Pondini's <a href="http://Pondini.org/TM/FAQ.html">TM FAQs</a>, for starters.
As for why they carry 3rd-party stuff in the stores, that's to satisfy their customers desires, but they don't guarantee them to work. WD externals have s a history of being crapola w/Macs, since they're focused on windows boxes.

Restoration after Hard Drive Failure

Hello all.
My Powerbook G4 suffered a hard drive failure a couple of months ago, and every bit of information was lost in no-man's land. After seeking help with Apple, I was sent to DriveSavers. Thankfully, they were able to recover 100% of my drive or that's what they tell me anyway. (No need to scold me, I have learned my lesson about backing up EVERYTHING -- especially when the bill arrived from DriveSavers!) The Powerbook was kaput, so I decided to purchase an new iMac. DriveSavers has put my entire Powerbook contents onto several DVD discs, but so far I have had very little luck with actually transferring and using any of it on the iMac. I have been able to copy document files from Appleworks, Photoshop, etc. onto the iMac, and I can open them and use them with no problem. Although, I did have to go back and re-install the actual Photoshop and Appleworks applications from their original software discs since I was unable to successfully copy the applications from the DriveSavers discs onto the iMac. Still, I am in desperate need of certain Apple applications from the Powerbook that just will not appear on the iMac -- things like Address Book, all of my Stickies , plus the other Stickies that were only located on Dashboard (i was a stickies freak), the emails and contacts saved in Mail, the appts. & scheduling in iCal, etc. I cannot successfully access these kinds of things. I am able to copy an entire disc from DriveSavers onto the iMac, but when I launch the Address Book application from that folder, it just opens up the empty, brand new Address Book from the iMac or the new, empty iCal. The same thing happens with other similar programs. (I think iTunes has been the only thing with which I have any kind of success.) I've even rifled through the DVD discs and gone through my old User folder to the Library folder, then the Caches folder, and finally to the .com.apple.AddressBook folder where I extracted just the Metadata folder which clearly contains all of my contacts. When I try to add just the contact cards to the iMac's Address Book application, I still doesn't work and remains empty. The only way I've been able to look at any of my contacts is to use TextEdit to open those contact cards, and then dig through all of the jargon and piece together the info. It's very frustrating and time-consuming. I would just like for my Powerbook to be reincarnated, if you will, here on this new iMac. Is this even possible? I am completely baffled, and beginning to fear that I may have paid thousands of dollars for DVDs that would serve me better if I were lost in the Sahara and needing to signal a plane flying overhead by reflecting them against the sun. If anyone has any advice or tips, I would be very grateful.
Cheers,
Maize
Intel-based iMac Mac OS X (10.4.6)
PowerbookG4 Mac OS X (10.4.6)
PowerbookG4 Mac OS X (10.4.6)

Hi,
Maybe this article can help :
http://docs.info.apple.com/article.html?artnum=106941#2c
Take a look at the 'manual' backup and restore sections of the article.
Good luck!
iBook G4 Mac OS X (10.4.7)

Powerbook's dead after Hard DRIVE is replaced.

Similar Messages

Maybe you are looking for