Powershell reports that AD group doesn't exist (but it does)
Starting about two weeks ago, my Powershell script to verify that groups exist before attempting to add a user to them has started reporting that a particular group does not exist, even though it does.
It's not a new group, it doesn't have a horrific number of members, it's set up the same way as similar groups, has been around for a long time, has the same properties as similar groups, it's not disabled, etc. From the AD side I can see absolutely
nothing wrong. I can add users to it with no problem. And yet Get-ADGroup insists that it doesn't exist.
I know this isn't a Powershell failure because it's accurately finding every other group. It's just this particular one.
I did notify our "AD guy" but he hasn't had time to look into it. I'm hoping that I can get a jump-start on identifying and thus fixing the problem by posting this question.
I apologize for the lack of detail - I'll be happy to provide more info if I know what you need!
Does this happen from all computers running powershell or just one? Are you using the full dn when referencing the group
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:
It is happening to any user on any computer. We're not using the full dn - the cmdlet used is "get-adgroup 'admin-mke'. Interestingly though, when I tried the dn instead, it does find the group: get-adgroup -identity 'cn=admin-mke,ou=exchange
groups,dc=na,dc=qb,dc=llp'.
Does that suggest that it IS a Powershell issue after all? It's just strange because it used to work, and all the other groups can be found with the simpler cmdlet.
Similar Messages
-
/dev entry doesn't exist but /devices does!
I have a pseudo dd that seems to install and attach ok.
There is an entry in /devices but none in /dev.
I've tried modifying devlinks.tab and running devlinks, but this doesn't help.
Its nearly there(I think) - any advice or pointers would be appreciated.I have a pseudo dd that seems to install and attach
ok.
There is an entry in /devices but none in /dev.
I've tried modifying devlinks.tab and running
devlinks, but this doesn't help.
use correct syntax i.e tab space before /D and
also give driver name and minor name correctly.
no need to run devlinks when u say add_drv devlinks
get automatically executed.
Its nearly there(I think) - any advice or pointers
would be appreciated.i too faced the same problem now very fine -
I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
I have a paid mobile me account and did have idisk working. Now when I click on it I am being told that the account doesn't exist or is currently unavailable. Any ideas? Thanks
Solution: No. Idea: Yes. A lot of "funny" things are supposed to happen while Apple moves MobileMe accounts to the new data center which will run iCloud. Maybe that's related....
-
Suddenly now when I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!
Only songs that are physically stored on the iOS device can be deleted with a swipe. Songs that have been listened to, and are in the temporary cache, apparently can not be deleted with a swipe. The easiest way to get rid of these songs is to go to Settings > General > Usage, tap Music (you may need to scroll down in the list), swipe across "all music" then tap the delete button. This will delete ALL music on the device.
Also, iCloud and iTunes Match are not the same service. -
I like to use my Itune card but take out my credit card info, that I will no longer use but it does not say (none) what do I do?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done". -
Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?
The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html -
I figured I would try.
Hi Dupree29,
Yes this is possible to do on your iPad. Go to Settings -> Music and turn on "Sound Check". This will help to normalize the volume levels of all songs on your iPad. Its not perfect, but it definitely helps to auto correct the volume of songs.
If Sound Check doesn't work well enough for you, there are audio devices out there called compressors and limiters that will process audio levels. But that is definitely a more advanced (and more expensive) alternative.
Hope this answers your question!
~Joe -
TS1424 File doesn't exist but says it's installed.
Purchased app. Says installed but won't let me download.
It's not the AppleScript that's failing, but more likely the shell script.
It's likely that AppleScript is calling the perlscript.pl file just fine, but perlscript.pl is failing because it can't find a file. That error gets passed back to AppleScript, and AppleScript reports it to you as the user.
The reason behind the failure is almost certainly because you're relying on some element of the user's environment that doesn't exist in the do shell script environment - most typically $PATH.
For example, your user's $PATH may include the path to perl, but the do shell script's environment does not. If that's the case, then writing the first line of the script as:
#! perl
will work when called from your shell, but may fail when called from do shell script if the $PATH isn't configured.
The solution? Look at the perlscript.pl and make sure you're using absolute paths where necessary - at the very least it'll need a full path for /usr/bin/perl, but maybe also other files referenced by the script. -
I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?
There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement. -
I want to change the security answers on my account but have noticed that the email address I listed is a hotmail one which I cannot get into. How do I change this as I only see an edit button for logging into iTunes but not one where I can change in the security answers. Thankyou
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94157) -
My kidspurchased Littlest Pet Shop for the iPad2. It loads and then does nothing. There is no Report this App button in the top right corner as suggested in App Support. What else can I do?
Contact iTunes Support: http://www.apple.com/support/itunes/contact/
-
When I click on the Firefox icon, I get a message saying there is a problem loading page.
Can you try to update to Firefox 18?
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
I seem to be stuck in a deadend. I need to update ACR to 9.0 for Lightroom 6
Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes. -
I have printed from the iPad before, but now when I try to print, it goes through the process of contacting the printer, says it sent the job to the printer, and then nothing. Meanwhile, if I do the same from my iPhone to same printer on same wireless network, no problem.
Same problem here,....but all solved now. The answer was very helpful. Thanks! I also want to commend DSpurs for asking the question with complete and thorough detail. Appropriately scoping the problem is half the battle.
Maybe you are looking for
-
Anyone used a Firewire A/B switch with audio interfaces?
I've got an RME FireFace 400 that I'd like to share between two boxes. I've heard horror stories about unplugging or pluggin in Firewire to (I guess?) live machines - where the interface or the Firewire port got zapped. Is this safe to do if. 1. Both
-
Set account's business partners relationships
I'd like to know if there's a way to set an organizational chart of an specific client for use it on the oportunities. Thanks!
-
Can Premiere output at 2x the play duration of a clip ?
Premiere Pro CS3 Is it possible to bring an avi into Premiere and output it at half the duration ? Where is that procedure done ? In other words If I bring in a 10 second avi clip, can I save it as an avi that will play for 5 secs ? I have a 120fps f
-
Can I delete the key as below? HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\LanguagePack\OpenType At Windows XP,if I want to run my application,I have to delete the key.But at Windows 7,when I delete the key,notepad.exe can't work.
-
Extraction Queue - SMQ1 - entries..
HI All, We are running some data loads from source SRM to BI . We have a Strange Issue: Without triggering process chains or Infopack groups in BI side, Extraction queues (SMQ1 TRFCs ) are filled automatically with some entries. It will causes