Powershell script for pinging computers from a text file and displaying output with ip address

i am currently using the following script to display the computers that are pinging, i also want the script to display the
ipaddress along with the results but the results are displayed not properly, i want the result to be displayed in a table or list format, what am i missing?
$ServerName = Get-Content "C:\scripts\computers.txt"
foreach ($Server in $ServerName) {
if (test-Connection -ComputerName $Server -Count 2 -Quiet) {
"$Server is Pinging "
} else
{"$Server not pinging"
foreach ($server in $servername) {
Get-WmiObject -class "Win32_NetworkAdapterConfiguration"|Select-Object IPAddress|Format-List

Not sure I completely understand your question but looking at the code you posted I see one fairly simple change that may be what you are missing...your Get-WMIObject statement never passes a server name to the command. You loop through the list
you obtained but never actually pass that to anything. So the simple change would be to just do the following...
foreach($server in $servername)
Get-WMIObject -class win32_NetworkAdapterConfiguration -computername $server
| select IPAddress | FT -auto
you could also tuck that command into the previous foreach/if/else statement and just do each one that actually responds.

Similar Messages

Reading from a text file and displaying the contents with in a frame

Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
                    FileInputStream fis=new FileInputStream(new File("nieman.txt"));
                     InputStreamReader isr=new InputStreamReader(fis);
                     char[] buf=new char[1024];
                     isr.read(buf,0,1024);
                     fstr=new String(buf);
                     String Tokenizer st=new StringTokenizer(fstr,",");
                     while(st.hasMoreTokens())
                                      pcode1=st.nextToken();
                           pname1=st.nextToken();
          price1=st.nextToken();
                          sname1=st.nextToken();
     } //close of while loop
                } //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.

If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

I need to read data from a text file and display it in a datagrid.how can this be done..please help

hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

Having trouble reading specific lines from a text file and displaying them in a listbox

I am trying to read specific lines from all of the text files in a folder that are reports. When I run the application I get the information from the first text file and then it returns this error: "A first chance exception of type 'System.ArgumentOutOfRangeException'
occurred in mscorlib.dll"
Below is the code from that form.
Option Strict On
Option Infer Off
Option Explicit On
Public Class frmInventoryReport
Public Function ReadLine(ByVal lineNumber As Integer, ByVal lines As List(Of String)) As String
Dim intTemp As Integer
intTemp = lineNumber
Return lines(lineNumber - 1)
lineNumber = intTemp
End Function
Public Function FileMatches(ByVal folderPath As String, ByVal filePattern As String, ByVal phrase As String) As Boolean
For Each fileName As String In IO.Directory.GetFiles(folderPath, filePattern)
If fileName.ToLower().Contains(phrase.ToLower()) Then
Return True
End If
Next
Return False
End Function
Private Sub frmInventoryReport_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim intcase As Integer = 1
Dim strTemp, strlist, strFile As String
Dim blnCheck As Boolean = True
strFile = "Report Q" & intcase.ToString & ".txt"
Do While blnCheck = True
strFile = "Report Q" & intcase.ToString & ".txt"
Dim objReader As New System.IO.StreamReader("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\" & strFile)
Dim allLines As List(Of String) = New List(Of String)
Do While objReader.Peek <> -1
allLines.Add(objReader.ReadLine())
Loop
objReader.Close()
strlist = ReadLine(1, allLines) & "" & ReadLine(23, allLines)
lstInventory.Items.Add(strlist)
intcase += 1
strTemp = intcase.ToString
strFile = "Report Q" & intcase.ToString & ".txt"
blnCheck = FileMatches("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\", "*.txt", intcase.ToString)
Loop
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim intcase As Integer = 1
Dim strTemp, strlist, strFile As String
Dim blnCheck As Boolean = True
strFile = "Report Q" & intcase.ToString & ".txt"
Do While blnCheck = True
strFile = "Report Q" & intcase.ToString & ".txt"
Dim objReader As New System.IO.StreamReader("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\" & strFile)
Dim allLines As List(Of String) = New List(Of String)
Do While objReader.Peek <> -1
allLines.Add(objReader.ReadLine())
Loop
objReader.Close()
strlist = ReadLine(1, allLines) & "" & ReadLine(23, allLines)
lstInventory.Items.Add(strlist)
intcase += 1
strTemp = intcase.ToString
strFile = "Report Q" & intcase.ToString & ".txt"
blnCheck = FileMatches("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\", "*.txt", intcase.ToString)
Loop
End Sub
End Class
Sorry I'm just beginning coding and I'm still a noob. Any help is appreciated. Thank you!

Ok, so if I'm following this correctly you should be able to just loop through all of the files in that folder whose file name matches the pattern and then read the first 22 lines, recording only the first and the last.
Exactly how you store the animal data probably depends on how you are going to display it and what else you are going to do with it. Is there anything other than name and cage number that should be associated with each animal?
You might want to make a dataset with a datatable to describe the animal, or you might write a class, or you might just use something generic like a Tuple. Here's a simple class example:
Public Class Animal
Public Property Name As String
Public Property Cage As String
Public Overrides Function ToString() As String
Return String.Format("{0} - {1}", Name, Cage)
End Function
End Class
With that you can use a routine like the following to loop through all of the files and read each one:
Dim animals As New List(Of Animal)
Dim folderPath As String = "E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\"
For Each filePath As String In System.IO.Directory.GetFiles(folderPath, "Report Q?.txt")
Using reader As New System.IO.StreamReader(filePath)
Dim lineIndex As Integer = 0
Dim currentAnimal As New Animal
While Not reader.EndOfStream
Dim line As String = reader.ReadLine
If lineIndex = 0 Then
currentAnimal.Name = line
ElseIf lineIndex = 22 Then
currentAnimal.Cage = line
Exit While
End If
lineIndex += 1
End While
animals.Add(currentAnimal)
End Using
Next
'do something to display the animals list
Then you might bind the animals list to a ListBox, or loop through the list and populate a ListView. If you decided to fill a datatable instead of making Animal instances, then you might bind the resulting table to a DataGridView.
There are lots of options depending on what you want and what all you need to do.
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"

Shell scripts to read data from a text file and to load it into a table

Hi All,
I have a text file consisting of rows and columns as follows,
GEF001 000093625 MKL002510 000001 000000 000000 000000 000000 000000 000001
GEF001 000093625 MKL003604 000001 000000 000000 000000 000000 000000 000001
GEF001 000093625 MKL005675 000001 000000 000000 000000 000000 000000 000001 My requirement is that, i should read the first 3 columns of this file using a shell script and then i have to insert the data into a table consisting of 3 rows in oracle .
the whole application is deployed in unix and that text file comes from mainframe. am working in the unix side of the application and i cant access the data directly from the mainframe. so am required to write a script which reads the data from text file which is placed in certain location and i have to load it to oracle database.
so I can't use SQL * loader.
Please help me something with this...
Thanks in advance.

1. Create a dictionary object in Oracle and assign it to the folder where your file resides
2. Write a little procedure which opens the file in the newly created directory object using ULT_FILE and inside the FOR LOOP and do INSERTs to table you want
3. Create a shell script and call that procedure
You can use the post in my Blog for such issues
[Using Oracle UTL_FILE, UTL_SMTP packages and Linux Shell Scripting and Cron utility together|http://kamranagayev.wordpress.com/2009/02/23/using-oracle-utl_file-utl_smtp-packages-and-linux-shell-scripting-and-cron-utility-together-2/]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Include text file and display from text file

Ok. I'm found the site with the monkey on the the flash thing and all it shows is a name, email and something else and I used it and it works by including a txt file and displaying text from that file as putting down this information
name.text = this.name;
and I can't find the site anymore to get help.
I want to know how to include a PHP script that shows this information like this
text=something I need&username=My Name&email=[email protected]
I want to show this stuff on the flash but every time I execute by using it as localhost/test.php, it will show a sentax error.
This is really stressing me out and I need a lot of help on this stuff.
Can someone help me?

ok. let me describe something else.
there's 3 text boxes that is dynamic text.
one of them is called name
the other one is called email
and last one is called location
in the text file, it shows this for importing to the flash file
name=My Name&email=EMAIL&location=My Location
When viewing the flash file that you created, it shows the name, it shows the email, and it shows location.
When I do it on my own even with a text file, it keeps on saying that there is an error on line 1.
I found a site that shows how to do it and it shows what to put in a text file, and it shows the action script. On the FLA file that he shows me has a monkey on the flash file and it has 3 text boxes that I described above. As well as the text file, it is the same. I used the example and it worked but I can't find the example again. I don't know what happened to the website and I don't know what happened to the download I had but it is not downloaded any more. I have adanced systemcare pro so it clears out my recent web searches and my recent downloads so I can't find it. I did a google search on anything about action scripts. I even did a monkey action script search and I couldn't find it.
It's making me mad and I don't know what to do. This is stressing me out way more than you think.
UPDATE:
I did a google search on a file I found in my www folder and I found it. finally.
Here's the site.
http://www.kirupa.com/developer/mx/externaldata.htm
now, I need to figure out how to load it from a PHP file.

VB Script to accept PC names in text file and get registry key value out of those systems

Hi All,
My task: Create VB script to accept PC names from a text file, process each host name to get Registry key value of individual host name and finally export them to a text file or an excel sheet having registry key value against each pc.
I want to pull key value of LSFORCEHOST located in HKCU/Environment of each PC and export this value against each pc in a text or Excel file.
What I achieved: I am able to process against single pc name but failed to process 3000+ systems listed in a text file which I tried to process through VB script. I am not pro and learning the VBS and cant write complex code.
My VBS code written so far(It failed many time with issue):
Option Explicit
Const HKEY_CURRENT_USER = &H80000001
Dim oFSO, sFile, oFile, sText, strComputer,oReg, strKeyPath, strValueName, strValue, objFSO, objFile, strContents
Set oFSO = CreateObject("Scripting.FileSystemObject")
sFile = "test.txt"
If oFSO.FileExists(sFile) Then
Set oFile = oFSO.OpenTextFile(sFile, 1)
Do While Not oFile.AtEndOfStream
sText = oFile.ReadLine
If Trim(sText) <> "" Then
strComputer = sText
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
strComputer & "\root\default:StdRegProv")
strKeyPath = "Environment"
strValueName = "LSFORCEHOST"
oReg.GetStringValue HKEY_CURRENT_USER,strKeyPath,strValueName,strValue
Const ForReading = 1
Const ForWriting = 2
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile("C:\destination.txt",1, ForReading)
strContents = strValue
Set objFile = objFSO.OpenTextFile("C:\destination.txt",2, ForWriting)
objFile.Write strContents
objFile.Close
End If
Loop
oFile.Close
End If
I think when I tried to process each PC name from text file against registry key value, above code not working. As per my knowledge some issue in loop. Do I need to add FOR EACH feature?
Please help to correct it. Thanks in advance.

I think when I tried to process each PC name from text file against registry key value, above code not working. As per my knowledge some issue in loop. Do I need to add FOR EACH feature?
Please help to correct it. Thanks in advance.
Your code contains numerous errors. Furthermore you make things difficult for yourself by giving similar names to the objects used for your input and output. If you are a systems administrator then your best bet is to make an effort to learn the language
instead of grabbing a few code fragments from here and there and hoping that somehow they will work.
Try the cleaned up code below for this particular project. Note the consistent code indentation. It helps you enormously when trying to understand the structure of the code. Remember also that you must fully qualify all file paths. Writing to "Destination.txt"
will cause endless confusion because you never know for sure where this file will reside.
Const HKEY_CURRENT_USER = &H80000001
Set oFSO = CreateObject("Scripting.FileSystemObject")
sKeyPath = "Environment"
sValueName = "LSFORCEHOST"
sFile = "D:\Test.txt"
If oFSO.FileExists(sFile) Then
Set oInput = oFSO.OpenTextFile(sFile, 1)
Do While Not oInput.AtEndOfStream
sComputer = oInput.ReadLine
If Trim(sComputer) <> "" Then
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" _
& sComputer & "\root\default:StdRegProv")
oReg.GetStringValue HKEY_CURRENT_USER,sKeyPath,sValueName,sValue
Set oOutput = oFSO.OpenTextFile("D:\destination.txt",8, True)
oOutput.WriteLine sValue
oOutput.Close
End If
Loop
oInput.Close
End If

Retrieve data from a text file and insert in table

hi,
i am writing an application which when executes would creates a user table and populates it with the data i.e. username and passwords taking it from a text file.
i would like to know if anybody can help as to how can i retreive the user name and password for every insert statement that will be fired to populate the user table.
thanks in advance for the help

for csv try a little search:
http://search.java.sun.com/Search/java?col=javafrm&qp=%2Bforum%3A31&qt=csv+import
search for ini files:
http://search.java.sun.com/Search/java?qt=ini+file&col=javafrm&rf=0&qp=%2Bforum%3A31
hope this helps
tobias

Compare data from 2 text files and output match

Hi all,
I need some advice.
Firstly in BinaryCode.txt the data is as such:
Replace BinaryCode0 1 0 0 0 0 0 0 0 0
Replace BinaryCode0 1 0 0 0 0 0 0 0 1
Replace BinaryCode1 1 1 1 0 1 1 1 1 1
Replace BinaryCode1 1 0 0 0 0 0 0 0 0
the first line in the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1)appear in the Timed_Sets.txt file.
The data in Timed_Sets.txt is as such:
BinaryCode0,6,40,.........................
BinaryCode0,7,40,.........................
BCName1,0,20,.............................
BCName1,1,20,.............................
For example since BinaryCode0 is a match I will output the entire row in Timed_Set.txt to another array.
I have been working on a program but I don't get the expected output.
The text files and the VI are attached.
I appreciate your kind assistance in the matter.
Thank You
Regards
kart
Solved!
Go to Solution.
Attachments:
BinaryCode.txt ‏1 KB
compare text files.vi ‏15 KB
Timed_Sets.txt ‏2 KB

If I understood correctly what the output should be then what you basically need to do is to walk through the column in BinaryCode.txt and for each unique value pull out the corresponding rows from Timed_Sets.txt. There's a variety of ways to do this, depending on how much data you have and whether or not you can use any kind of prior knowledge as to the actual file content (such as the names of the keys being searched). Attached is one way. Modify as needed.
Attachments:
compare text files MOD.vi ‏27 KB

How can I get text from a text field and display it in an alert?

Hello! I am BRAND NEW to Objective-C and Xcode and iOS, so PLEASE be forgiving of what is going to be a stupid question. I have a text field. I want to enter some text, click "return", and see my text in an alert. It doesn't serve any useful purpose, but this is how I learn. So far, I am unsuccessful. Here's my function from my HelloEarthViewController.m file:
-(IBAction)showInputMessageUITextField *)textField
if ([textField.text isEqualToString:@""])
    return;
UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                     initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textField.text]
                                     delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
// Display this message.
[helloEarthInputAlert show];
Then I go option+click the text field and drag it to File's Owner and connect it to "showInputMessage:" Then I run it and the build succeeds, but nothing happens when I click my "return" button on the iPhone simulator.
What have I missed? Where have I gone wrong?

Okay, here's where I am. I have this in my view controller .h file:
@interface HelloEarthViewController : UIViewController <UITextFieldDelegate>
    IBOutlet UITextField *textFieldTest;
@end
And this in my view controller .m file:
-(IBAction)showInputMessage
    if ([textFieldTest.text isEqualToString:@""])
        return;
    UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                         initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textFieldTest.text]
                                         delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
    // Display this message.
    [helloEarthInputAlert show];
And I have connected the text field to showInputMessage. When I hit "return", however, I still get nothing.
Is an "action button" a real button? From my limited understanding, the alert should launch when I click "return" since showInputMessage is attached to Editing Did End on the text field.
Thanks for the help. The transition from writing C# for web applications to writing Objective-C for iOS applications is not going as smoothly as I'd anticipated.

Read data from text file and displaying on Webdynpro

Hi all,
I need some help. I have a text file with set of name, phonenumbers . I want to know how to display the data using Webdynpro. Could some one help me. help is appreciated and I promise to award points for right answer.
Thank you
Maruti

Hi Maruti,
just open the file and loop on the rows, here an example::
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.IOException;
FileReader f = new FileReader("c:
FileName.ext");
while ((s = in.readLine()) != null)
//Here you can put the line into a WD context structure, i.e:
wdContext.currentContoEconomicoFormElement().setField(s);
}catch (Exception e) {.....}
in.close();
f.close();
For any others questions, please, let me know.
Vito

Need to delete the old page number from a combined file and replace it with the new number. is there a way for me to do that using JavaScipt

is there a way of using JS to delete the old page number (1,3,32,78) on a combined PDF and inset it with a new page numbers (1,2,3,4) Thank you

Depends. If the page numbers can be located by their location on the page then a script can be written to redact that area, and then add new page numbers in their place (or somewhere else).

Read a text file and display a xy graph

Hi!
I am using LabVIEW 8.5, and I am trying to read columns from
a file and plot with xy graph. I can do it with two channels, but I am having
problems when the numbers of channels connected increase (maybe six or ten).
My text file looks like this:
[Where first column x = time, the rest of the columns are
channels = y]
8.828        22.604        23.076            [The number of channels connected can
change]
9.828        22.604        22.604
10.828      21.658        22.131
11.828      22.131        22.131
12.828      22.131        22.131
13.828      22.604        22.604
14.828      21.658        22.604
15.828      22.131        22.131
16.828      21.658        23.076
17.828      22.604        22.131
18.828      22.131        22.604
I attached a picture of what I already try… Now I am trying
a combination of those. If anyone has some
advice or suggestion, please let me know.
Sincerely,
Julieta.
Solved!
Go to Solution.
Attachments:
xygraph.PNG ‏25 KB

Thanks for the advice!... I just modified what I had a
little bit and it is working, maybe is not the optimums solution…
I would like to make the time invisible in the graph… It that possible? I attached a picture of my graph, because my English is not good. There are two lines near to 22 (two channels
connected at that moment), and a line near to 0 which is time (the strong pink one). I would like to make invisible the strong
prink one only. I try to make invisible,
but I fail… I changed colors looking for another solution and I fail again,
because it is taking the colors that I choose for the channels. I can not disable because I need it to make
the x axes works with the time that I already saved.
If someone has an advice or suggestion I really appreciate it…
Sincerely,
Julieta.
Attachments:
xygraph.PNG ‏9 KB

Powershell script for pinging computers from a text file and displaying output with ip address

Similar Messages

Maybe you are looking for