PPR does not work - I need a workaround

I have 2 boolean checkboxes nested in tabs; PPR does not seem to work, so I am using a method that does the rerendering for me if I pass in the component. However, in the case of checkboxes which are nested in a panel box, the rerendering fails with the method call. I reset the values of the associated with the checkboxes(value attribute on the component) from the backing bean before I call the method to rerender the page, Is there a workaround. I do not know why the PPR fails to begin with, it might be a bug. There are other components within the tabs that should use PPR but PPR fails on. I have autosubmit and immediate set to true.
Thanks,
Veena

Hi Veena,
the most common mistake with PPR is setting the listener on the actual component itself rather than the surrounding component. If you a rendering or hiding components you need to set the listener on a surrounding component that will always be present on the page (a component can't listen if it is not on the page).
Brenden

Similar Messages

  • My up button for volume does not work and need to turn incoming call volume up. is there an app to do this

    my up volume button does not work and i need to turn the incall volume up. is there an app that does this?

    Hey skeith75,
    Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
    iOS: Using AssistiveTouch
    http://support.apple.com/kb/HT5587
    If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

  • PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

    Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
    In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
    Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

    No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
    This would not be an option to me because of the buds fixed in 11.1.1.1.0.
    Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
    Timo

  • Flash player does not work i need help!!

    flash player 10 says it downloads but it doesn't work youtube does but like myspace and facebook doesnt work it still says I need  to install it so I tryed the other way with the zip file and the uninstall and change ActiveX thing and it still doesn't work

    Hello, the first thing that I would do in this case is to make sure that you have Flash Player
    version 10.0.32.18 installed.  Go to www.adobe.com/software/flash/about.  Adobe will tell
    you if this is installed, the version number and if the install was successful.
    Now, the next thing to do is go to Tool>manage add ons, find Shockwave Flash Object,
    click on it, look down at the bottom right side and click on Update Active X.  When that
    is finished, then you will need to restart Windows.
    Now go to the sites that you were having problems with and see if they now work.
    Please post back one way or the other.
    Hope it works for you, it did for me.

  • Try to use Headset for Skype on G5, but microphone does not work! Need help

    I recently installed skype on my G5, bought a headset, can hear people talking to me, but nobody can hear me. It's not an USB or bluetooth headset, but with 2 plugins (sorry, i'm austrian...).
    Does anybody know what setups to change that it works?
    I try the system configuration and set up line in and line out...
    Pleas help!

    I have used a headset with the 2 connections. In order to connect I use the Griffin iMic as my adapter. Every once in awhile I get the 2 plugs in backwards and have to switch them.
    http://www.griffintechnology.com/products/imic/
    The other thing I have had happen is that my machine seems to auto mute when I switch things around. Sometimes I have had to go in to the System or program preferences to change the settings. For some reason the system has muted me or the program I am using did not keep the previous settings due to having the headset unplugged/replugged etc.
    Message was edited by: Casey

  • Viewing web cam does not work, help needed

    I'm having trouble viewing an iSight webcam on my iBook. I start up iChat on my MacBook then click accept to start viewing the webcam. 'connecting' comes up and thats as far as it goes. Same with audio, click accept and then it goes to 'connecting' then the same happens. I thought you could still 'view' the webcam even though theres not one installed on my iBook? Any help would be much appriciated, thank you!

    Hi Tymon,
    Can I ask if you have an AIM or @mac name (A screen name ) ?
    If so have you set this up in iChat ?
    "Connecting" would indicate you are not Logged on to the AIM server hence my first question.
    You can View your Preview by Clicking on your own Video icon next to your Buddy Icon pic. (or by going to the iChat > Preferences > Video section).
    If the mac firewall is On but you have not set iChat ports then you could have problems particularly if in the Advanced section you have Stealth mode selected.
    You will also need to open the ports in any device that routes to connect you to the internet.
    This FAQ may help explain the questions further
    http://discussions.apple.com/thread.jspa?threadID=527902
    10:41 PM Sunday; April 29, 2007

  • Changing icons & Controls does not work- Help needed

    When changing the theme in "theme preferences" only the window borders change... The icons and window controls remains as the same boring default.
    Does anybody have a solution to the problem?

    kapelrud wrote:
    Oh, sorry... I just had to forget that
    I use gnome 2.8 as my DE
    Update: A nice little reboot fixed the problem. It may have been because I added fam to the startup...
    i always use ... "switch" and "switch2" from pacman.  they're small programs to switch gtk/gtk2 themes... I don't have the whole gnome package so that works well for me.

  • Auto brightness does not work anymore, need help!

    Auto brightness quit working... I see a several posts but no replies? Anyway to fix this? Is this an iso6 issue?

    If you have tried the troubleshooting steps for the iPhone, (power off/on, reset, restore) and none of them work, then I would say it is probably a hardware issue. The sleep button can fail after a period of time and you state you are using a 3G, so it is possible it was failing before you did the upgrade and that it has finally given up. It may be you need to either look for a repair facility to repair it or replace the phone. Up to you.

  • E61 Bluetooth modem does not work - help needed

    I have an IBM ThinkPad R51 Laptop with XP Profesional SP2. I have installed the latest version of PC Suite, 6.82.22.0. I can sync using the bluetooth connection. I can connect my laptop to the internet with my E61 using the USB cable.
    But I cannot connect to the Internet using the BlueTooth connection. The BlueTooth modem appears to be the problem. When I try and connect it fails with the msg "Failed to connect to the Network! One Touch Access could not connect to the selected device."
    If I go to the Blue Tooth Modem properties via the Control Panel and Query the modem I get the following error msg:
    "The modem failed to respond. Make sure it is properly connected and turned on. If it is an Internal modem or is connected, verify that the interrupt for the port is properly set."
    BlueTooth stack is WIDCOMM ver. 1.4.3.4.
    NB. I am unable to select the Microsoft stack in Connection Manager.
    Operating system:
    Microsoft Windows XP
    Build 2600
    Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Locale: English
    Input language: English
    Nokia PC Suite:
    Version 6.82.22.0
    Language: English
    Connectivity Cable Drivers:
    Not installed
    PC Connectivity Solution:
    Version 6.43.9.0
    Microsoft Outlook:
    Version 11.0
    Build 8010
    Bluetooth stacks:
    Microsoft Bluetooth stack
    Version 5.1.2600
    Build 2180
    WIDCOMM Bluetooth stack
    Version 1.4.3
    Build 4

    seems to be something with the ibm software on the laptop
    I have the same problem with a thinkpad r60

  • Hp pavilion dv6000 coprocesor does not working .

    My hp pavilion dv6000 coprocesor (windows7-64 bit) does not working.i need to install it but I cant find it, can u help me abut this regerd.
    This question was solved.
    View Solution.

    Welcome to the HP Forum!
    rajurasidh wrote:
    My hp pavilion dv6000 coprocesor (windows7-64 bit) does not working.i need to install it but I cant find it, can u help me abut this regerd.
    Please identify your notebook with the product name (p/n). It should be on the barcoded sticker on the bottom of your notebook or in the HP Support Assistant.
    What you probably need is to install the chipset drivers. You can find them at the drivers & software download section of the HP web support portal for your notebook. Install the drivers that match your installed operating system.
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Areca Raid Controller - ArcHTTP - does not work

    Areca Raid Controller - ArcHTTP - does not work - in need your help !!!
    I am running Win 7pro, 64 bit, 24 MB RAM
    Areca 1680 controlls Raid 3 7TB and Raid0 1TB. McRaid works fine.
    1. Areca ArchHTTP V 1.85 is installd fine
    2. When opening ArchHTTP-GUI it is showing:
         a. Controller #01(PCI): Port 81 running
         b. Cfg Assistent:          Port 82 running
       Application started, 1 contoller found, launch...........:81
    3. when i activate Cfg Assistant and launch Browser, ARCHTTP - Configurations opens
    4. when i activate Controller #01(PCI) and launch Browser, the website for unsername and password opens
    5. after filling in user pandpassword ....nothing happens, the website doesnot open. It seems that i could not be found.
    Any idea, thanks for help
    klfi

    This is likely do to new Phishing or Popup rules in IE9. Most web based controller management utility's do not show up as a valid website since they use local host or internal IP addresses. I know Areca has in the past used Java for their utility which also trips many of those rules. Try adding the web utility as a trusted website.
    Eric
    ADK

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • My iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

    my iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

    If you weren't able to sync the purchases to a computer previously and now your iPod needs to be restored so you can't sync it now, then you may be out of luck and will need to purchase your content again. Officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. The official statement of their policy can be found here, among other places.
    You can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it. 
    Good luck.

Maybe you are looking for