PPR using af:commandButton's and af:table

I am testing PPR functionality using an af:commandButton (setting PartialSubmit to true and giving the control an id value) to update an af:outputText (setting the PartialTriggers property to the id of the af:commandButton ) and I have no problem doing this.
However, I am now testing the functionality by trying to use an af:commandButton that is embedded within each row of an af:table (so if my af:table has 5 rows, the af:commandButton will be displayed 5 times). My af:outputText now will not update based on my clicking the af:commandButton.
Has any body tried to do this?
Is what I want to do even possible?
Any help would be appreciated.

In case anyone wants to do this, here is the solution...
1. Make sure the af:table containing the af:commandButton has its id set.
2. Set the PartialSubmit property for the af:commandButton to true.
3. Set the PartialTriggers property for the af:outputText to the following
<table id>:<commandButton id>
For example, if the id of the af:table is myTable and the id for the af:commandButton is myButton, then the PartialTrigger property for the af:outputText should be set to...
myTable:myButton
I hope that helps.

Similar Messages

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

Using power shell function and SQL Table

I have a table holding file path of over 1 million documents. so like column one is documentID and column two is full file path.
Now, I want to get the file size of each of the documents. I have a function in power shell that gets the size of a file given file path.
My problem, is I do not know how to use that function and the table to get the size of each of the files(documents).
Help Much Appreciated!!
ebro

I am not clear with your questions sir. Do you mean the category this question belongs too? If so, may be some body could help redirect the question to the appropriate place.
So what category does this belong too CM12 or Powershell?
http://www.enhansoft.com/

Problem w/ image item using 9i BLOB field and InterMedia ORDImage Object

Hi,dear all,
I have a problem with image item in Form 6i. Oracle 9i is used as backend DB, and a table contains image data is created for testing:
create table image_test(
id number,
image blob
In Form 6i, there is no problem to create a block for inserting/updating the image record into the database. However, it can not be used to retrieve image (blob field), the image item remains empty after 'execute query', while the id field can be retrieved. When the same table is created in Oracle 8.1.7, and the exact same form can be used without any problem both in inserting and retrieval. It seems that the Oracle 9i does not use the same way to store BLOB column. Has anybody ever encountered this problem? How to retrieve image (BLOB) in Form 6i from Oracle 9i?
I tried to use interMedia ORDImage as the data type in Oracle 9i, that is,
create table image_test(
id number,
image ORDSYS.ORDImage
Same problem, the form can insert record with image, but when retrieving, nothing displayed. Anybody could help! Thanks in advance!

hi!
well working with oracle8i and form6i.
same problem..but i used (instead of blob or clob as datatype..) Long raw..
it can be saved as usual..i mean Commit..
and can be retrieved..using Execute_Query..its working fine..
well if anybody get any other solution..do inform..
mail_id:
[email protected]

How can I use TopLink for querys that have two and more tables?

I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.

You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API

Using VO as form and table on same page

Hi,
We are facing some issues while using same view object on one page. The view object is dropped as input form and as table on same page. There are few fields in the input form that have autosubmit property set to true. Now while entering the data into form, after clicking any autosubmit field, if we refresh the page, then new row gets created in table with value of the auto submit field. This is in cache only and not created in DB. We tried by exposing two instances of same view object in application module but still same issue. Finally we created two view object, one which is EO based and another ready only through query. Its working fine now. But is there any other possible solution, without creating two view objects?
Jdev: 11.1.1.6.
Thanks

Hey Ami,
I've tried understanding your problem but i'm not sure if i could.
The problem is that you can insert via the form but it doesn't update the table ?
Is that it ?
Regards,
Frederico.

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
I have spent hours on the phone with what I now know is a call center in Texas on this question.
I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
I don't want to disable portrait mode.
Will Apple accept the books if I tell them this is not an "error?"

How to make reference wbs custom data carried to new wbs when using custom tab and custom table

I created a custom tab for WBS elements by using user exit CNEX0007 and custom screen and put a table control in it.
As table control's data has to be stored in a table I could not use append structure of PRPS.
When I used reference wbs, PRPS custom fields were carried also but I could not find any solution to fill table control data with reference table.
I need to get correspondence between reference number's and new id's key data. Is there any exit, enh. that I can store the relationship.

Solved...
I've used an enhancement point in include LCNPB_MF38. CJWB_SUBTREE_COPY exports a table called newnumbers. Here you can find correspondances between copied WBS and new WBS.
Exported table to memory id.
And imported it in another user-exit. You can use proper user exit for your need. ( EXIT_SAPLCNAU_002)

Using dbms_xmlgen.getxml with new and old tables in triggers

Is there a way to use getxml against the data stored in the new and old tables in a trigger? Simply doing this:
Xml_Variable := dbms_xmlgen.getxml('Select * from New');
Does not work.
Edited by: user13302591 on Jun 16, 2010 1:16 PM

user13302591 wrote:
How would I pass the information from the :new and :old to getxml?What are you trying to do? You could use, for example:
XMLELEMENT("old",:old.column_name)
XMLELEMENT("new",:new.column_name)SY.

Use of T168F and T168 Tables in System

Hi everybody
I'm making a development, the purpose is to assign the Release Strategy to RFQ's when the user sets the Unit Prices for Items in transactión ME47.
This action is executed in SAPMM06E in Routine strategie_ermitteln calling FM ME_REL_STRATEGIE_EKKO, but before the call there is a check at routine begin: t160-vorga NE vorga-angb (vorga-angb is a constant 'AG').
t160-vorga has the 'A' value for ME41 (creating RFQ), then in this transaction the Strategy is assigned.
But in ME47, t160-vorga has the 'AG' value, then the FM is not called.
I solved this making t160-vorga = 'A' (only in memory) in EXIT_SAPMM06E_017, and the Release Strategy is assigned ok.
But, when the user modificates a price using a button, the program makes a validation in Routine FCODE, checking that the value of t160-vorga exists in T168F and T168 tables with field fcode = 'KO'. Because i modified the value from AG to A, this record does not exist and the program set an error. But, if i don't modify the t160-vorga, the Release is not assigned because the check in Routine strategie_ermitteln.
So , i'm thinking in change my development, calling myself the FM ME_REL_STRATEGIE_EKKO in EXIT_SAPMM06E_012 when action Save, but i dont' like this solution because i would need to copy not only the FM call, but else all the code involved in fill the parameters.
So, i think other solution is to create the record for vorga = 'A', fcode = 'KO' in T168F and T168 tables.
If somebody can helpe, my doubts are:
1. what implicates this record creation in these tables T168/T168F, that is, wich is the usage of these tables in the system ??
2. Where can i see the meaning of t168-vorga values (AG, A, K, F etc.) ??
3. In wich transaction can i create records to these tables ??
4. Could be any problem if i add that records to these tables ??
Any help will be apreciated !!
(Excuse the long Topic text)
Thanks
Frank

Hi Frank,
2. Look the table T167T (to find this, I was going into the SE11, Data element: VORGA, : table, ...)
3. The table T167T could be updated with the SM30/SM31 transaction. But you have a warning message.
4. See the message, in the previous answer
Rgd
Frédéric

Guage and Pivot table uses in OBIEE

Hello Folks,
please help to understand what is PIVOT TABLE and GAUGE in OBIEE answers
in what cases or scenario will this things be used.
and what is CASE in OBIEE, where is it used and what is its use .
thanks in advance
KMR

The pivot table view is an interactive view that allows you to rotate the rows, columns, and section headings to obtain different perspectives of the data. Pivot tables are navigable and drillable, and are especially useful for trend reports.
Gauges are useful for showing performance against goals. Supported gauge types include dial, bar, and bulb-style gauges.
CASE statement is used for conditions, usage is case when x=y dothis end.. Its like IF statement in programming.
- Madan

Using interface builder to create a table view and add a cell

So I am using interface builder to make a table view. Should be easy. I drag a table view controller to my view, then it seems I should be able to drag a table view cell to the table view but it won't let me drop it down. If I do it in the documents window it just replaces the table view with a cell. Seems like this shouldn't be hard, but it's one of those things that should take 2 seconds but I have been messing with it for hours. It seems like most of the examples I have looked at in the same code don't use iB so I haven't found a good reference. If somebody can point me in the write direction let me know.

I struggled a bit too. Here's what I did on my recently completed app. I used IB to create the basic view and add the table. That's it. Then ensure your UIViewController based class implements the UITableViewDelegate and UITableViewDataSource protocols. Your cells will come from those methods, not anything you do in IB.
If you're creating a set of screens that just have tables that allow you to navigate up and down through the data then IB isn't worth using at all.
Just have your views extends UITableViewController and follow some of the supplied table based example apps.
I rewrote my first app 3 times as I slowly figured all of this out.
Hope that helps.

How to use CDHDR and CDPOS tables

Hello Gurus,
How can the data be extracted from CDHDR and CDPOS tables ?
For example, I want to find the changes for the material master, what is the object need to be given in the OBJECT value etc..
I tried to use restricting the transaction MM02 and the date valid from and to, but it is taking longer time.
Appreciate, if you can provide the objects which can be used to track the changed data like Production orders etc..
Thanks
Aadhya

Hi Aadhya,
For the Change Document Object (OBJECTCLAS), you can use the following item:
MATERIAL = material master
ORDER = production order/maintenance order
EINKBELEG = purchasing document
VERKBELEG = sales document
The Object Value (OBJECTID) is usually the object's number, such as material number, production order number, etc.
Get the Document Number (CHANGENR) and go to CDPOS to see the changes detail.
Regards,
Julian

SAP QUERY using ASSHR and ASSOB tables

We currently have SAP query that reports on additional payments (Info type 0015). The user wants to report the cost center held on the cost assignment (Tables ASSOB and ASSHR).
The existing query uses infoset created using PNP logical database.
How do I add or join the ASSOB and ASSHR tables to Info type 0015 to report the cost center?
Thanks in advance
Shamshudin

Hi Sham
You may need to create custom fields in the infoset and create some code to pull out and display details from ASSHR and ASSOB corresponding to the ifnotype record.

Using Logical Databases and the Tables or Nodes Statement

I want to start using Logical Databases whenever possible, but it seems that I need to use the Tables or Nodes statement for the Get statement to work. Is there anyway to avoid Tables/Nodes statement since they are obsolete (and still use LDBs)?
Message was edited by: Jason DeLuca

Hi Jason,
1) table statement is obligatory:
-> look at abap-docu to GET:
node is a node in the logical database that is assigned to the report (type 1 program) in the program attributes. <b>You must declare the node in the report using the NODES statement (or the TABLES statement, if the node is of the type "table").</b>
2) some ldb-selections from the selection screen
depends on the table-statement too, i remember...
regards Andreas

PPR using af:commandButton's and af:table

Similar Messages

Maybe you are looking for