SAP QUERY using ASSHR and ASSOB tables

We currently have SAP query that reports on additional payments (Info type 0015). The user wants to report the cost center held on the cost assignment (Tables ASSOB and ASSHR).
The existing query uses infoset created using PNP logical database.
How do I add or join the ASSOB and ASSHR tables to Info type 0015 to report the cost center?
Thanks in advance
Shamshudin

Hi Sham
You may need to create custom fields in the infoset and create some code to pull out and display details from ASSHR and ASSOB corresponding to the ifnotype record.

Similar Messages

Any problem using bseg and bkpf tables

For fico details i using bseg and bkpf tables.
I noted that programming is very difficult because of these tables are cluster table.
plz give me other tables
if i using these tables any problem will come?

>
mysvijai197715 wrote:
> Hi Aniesh,
>
> BSEG and BKPF are cluster tables. It contains transperant tables like BSIS, BSIK etc. For example to take vendor details usr the BSIK.If you use BSEG and BKPF it will take long time search. suppose your concern having lot of data means may be your server will get shutdown. So use only trasnperant tables like BSIS, BSIK etc.
>
>
> Regards
> R.Vijai
Incorrect. BKPF is a transparent table and not a cluster table and you can use it just like any other transparent table. BSEG is a cluster table but there is no problem selecting from it so long as you use the key of BUKRS, BELNR, GJAHR - unless you are selecting a very large amount of data, but then this can cause problems when selecting from any type of table.
The advantage of using BSEG over the other FI line item tables such as BSIS and BSIK is that it holds all the lines of an FI document while the others will hold only a subset eg BSIK will only hold lines that contain a vendor reference and BSAS holds only cleared GL account lines. Though you can only use it when you have the key. If you need to search on vendor, you can use BSIK as a starting point, but since I usually need to get hold of all the lines on an FI document, I then have to select from BSEG anyway.

SAP Query Use and Transport Strategy

Anyone wish to share their experience in the use of SAP Query? We generally have an understanding that we don't want to be giving out this tool to end-users in Production. We would like to create queries, and when we wish to give them out we'll attach t-codes to them and roll them out.
However in practice, this is becoming difficult. An example is where in our gold client we create queries and then we would typically transport to our unit test client. But whenever we do an export, it generates a transport request. Before we are done testing we may end up with 10's of transports for a single query?
Anyone have some ideas on a transport strategy for SAP Query? How about it's use in Production? Our landscape for changes are typically DEV Gold -> DEV Test -> QAS -> PRD. We would ideally like our transport strategy for queries to match what we do for everything else.

HI,
Query objects are transported in different ways according to the query area in which they were created.
In order to know which transport options are available, you must first understand how query objects are created.
Standard Area
Query objects are stored in the client-specific table AQLDB. They are not connected to the Change and Transport Organizer.
Global Area
Query objects are stored in the cross-client table AQGDB. They are connected to the Change and Transport Organizer.
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb467f455611d189710000e8322d00/content.htm
Global area objects can be transported into other systems. Standard area query objects can not only be transported to other clients within their own system, but into all clients of other systems as well. In addition, query objects can be transported from the global query area to the standard query area and back within the same system.Transports are normally performed by the system administrator, not by end-users. For this reason, you need the appropriate authorizations
Check the below links for detailed explanation
Transporting Global Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052786a30411d1950a0000e82de14a/content.htm
Transporting Standard Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052789a30411d1950a0000e82de14a/content.htm
General Transport Description
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb4699455611d189710000e8322d00/content.htm
Generating Transporting Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46a6455611d189710000e8322d00/content.htm
Reading Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46e7455611d189710000e8322d00/content.htm
Managing Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46f4455611d189710000e8322d00/content.htm
Transporting Objects between Query Areas
http://help.sap.com/saphelp_47x200/helpdata/en/ec/05278ca30411d1950a0000e82de14a/content.htm
I hope this solves your purpose.
Regards,
Vara
Message was edited by:
varaprasad bhagavatula

SAP Query (SQ01) who and when to use the report

HI Experts!!!
Is there somewhere recorded information: who and when to use the report from SAP Query (SQ01)?
Thanks

Hi
This topic doesn´t belong to the Service Marketplace Area.
regards Martin

SAP Query PNPCE LDB with additional table.

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
The fields of ZPA9050 is not available as selection fields when I try to Query through SQ01.
(How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01).
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
What needs to be done in order to get them as Selection fields (Input Fields)
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Pradeep

Hello,
at the time of cretaing INFOSET using transaction SQ02. You can click on the Extra button nad than on the selection tab to add some fields on the selection screen.
Reward if useful
Mohit

Inner join query used with 7 Database tables

HI All,
In a report they used the Inner join Query with 6 Data base table..now there is a performance issue with at query.
its taking so much of time to trigger that query. Please help how to avoid that performance issue for that.
In that 2 database tables containing lakhs of records..
According to my knowledge it can be avoided by using secondary indexs for those 2 database tables..
and by replacing the Inner join Query with FOR ALL ENTRIES statement.
i want how to use the logic by using FORALL ENTRIES statement for this..
So, please give you proper suggestion to avoid this issue..
Thanking you.
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 16, 2011 10:27 PM

Hi,
And what do you mean with "they used"? If "SAP used" then yo will need to ask a SAP for note
FOR ALL ENTRIES is quite good described in help. Please search forum also.
Without query it won't be possible to tell how it can be optimized, however you can try to use SE30/SAT and ST05. Maybe it will help you.
BR
Marcin Cholewczuk

Find SAP Query using Tcode

Hi All,
I have TCode of SAP Query, i need to find out SAP Query.
things i followed:
1) Executed TCode and menu bar --> System --> Status. I got Program.
2) I went to SE93 --> TCode --> Display --> bottom i got UserGroup, Query but when i try to check that Query in SQ01 it is saying Query has not created.
3) Executed program using FM RSAQ_DECODE_REPORT_NAME, got UserGroup n Query. but same issue as above.
Query is working but when i check in SQ01, it has not created is showing.
My requirement is - functional has created 4 SAP Queries. i need to merge all the SAP Queries into 1 report program.
i need how can we check those SAP Queries in SQ01 using TCode.
Regards,
Naresh.

Hi Naresh,
You did not explain how the reports were created, but if they can be accessed directly via a transaction code individually, they were probably manually created by a programmer via ABAP and were not created via SQ01. Thus, you cannot find them in the SQ01 table. Only if they were created via Ad Hoc Query (PQAH) or directly in SQ01, would they be available via SQ01.
If they were created in SQ01 in a Development system and transported to your Productive system, they can be found in the Global Area as indicated above by Boris. If they were created directly in the Productive system, they can be found in the Standard Area. And again, each area has its own set of User Groups, so you may be looking in several areas. The key is to learn how and where the queries you are searching for were created.
Paul

Creation of SAP Query in SQ02 with Single Table With Condition

Hi All,
I want to Create SAP Query in SQ02 using single Table MCHA.
ii) I dont want all entries of MCHA Table I mean , I have to apply some Condition on this Table.
i.e Suppose I am having actual data in MCHA table is like this for Material M1.
Plant    Material   Batch   BatchCreationdate
P1          M1         B1       20.06.2007
P2          M1         B1       04.05.2009
P3          M1         B1       04.05.2009
But I want the Output of SAP Query is like this:
   Material   Batch   BatchCreationdate
      M1         B1       20.06.2007
That is irrespective of Plant if Material & Batch are equal ---> 1st record with Lowest date shoud get at the output.
Please help me How write the code on single table in the SAP Query.
Thanks,
Kiran Manyam

Hi,
Your query should be like this:
Select MATNR CHARG HSDAT
from MCHA
into table t_mcha
where matnr = Materlal number from selection screen.
The structure of t_mcha should contain the fields that you select.
Then sort the table by date ascending
Sort t_mcha by HSDAT.
Hope this solves your problem.
Thanks,
Sowmya

Is there any BAPI for Goods receipt that uses LIKP and LIPS tables?

Hi experts
I want to pull info for a given delivery note(DN) by joining LIKP and LIPS tables. Is there any existing BAPI that can give my info by using the two tables?
Please help
Thanks
Gopal

Check the above link and reward points if helpful
http://help.sap.com/saphelp_nw04/helpdata/en/b0/dad2b40b3611d2a55a0060087832f8/content.htm

Integrate Sap Query into ESS and MSS

Hello
I have been following this http://scn.sap.com/docs/DOC-50736;IDSactivation=99FDF6E06B5918D0293BF0BE7884FBCB0606A0F376FFD7908517BA7F2738E3A6
for the intergration of SAP Query.
However i am getting stuck at step 6 as it appears RP_MSS_CONVERT_MDT_TO_LPD_CUST
does not exist and ideas what i am missing.
So i have had to convert my MDT scenario using PWPC_CONV_MDT_TO_LPA
From there i have then been able to run program APB_LPD_LPA_CUST_TO_LPD_CUST
which has converted it into a launchpad in LPD_CUST, however once there it has no system alias defined for my applications so they won't launch and the launchpad entries for managers desktop don't give me a system alias option.
Regards
Adam

Hi Adam,
what release are you on? Do you use any Add-ons? The document you are following is written for EHP6, and I think MSS Add-On 1.0 is also needed as this add-on brings the WD ABAP applications for MSS.
The report you don't have in your system is located in the WDA specific package for MSS, so I think it comes with the Add-on. The transaction you use for launchpad generation is the "old" one, that can be used from Enterprise Portal. Inside portal, you have a launchpad iView with properties for the scenario and the system alias.
Do you have a possibility to install MSS Add-On 1.0? This should solve your problem and let you follow the guide.
Regards,
Marc

SAP Query - Need to join 3 Tables via outer join

Hi,
I need to join 3 Tables using SAP Query. I wish an OUTER JOIN to be performed for the table join.
For Example:
Table 1 has 1000 Entries           Field A             Field B
Table 2 has 300 Entries             Field A            Field C
Table 3 has 100 Entries             Field A           Field D
The normal Join (INNER JOIN) gives me only the records that exists in all the 3 Tables.
But what i need is:
In the above example, If one entry in Table 1 has no matching records in Table 2 / Table 3, there should be an output entry in the SAP Query like
Field A            Field B              Field C            Field D
xxxx              yyyy                  Blank             Blank
If there is a common record that exists in the tables, that record should appear in the same entry in the Query output.
Field A            Field B              Field C            Field D
xxxx              yyyy                  zzzz              aaaa
In this way, there should be a minimum of 1000 entries (Largest no of records in the Tables joined). More than 1000 records in the Query output depends on the number of common records.
Kindly help if you have come across such a scenario.
thanks & regds
sriram

Hi
Please join the outer join as below
Table1 with Field A to Table 2 Field A-----outer join
Table1 with Field A to Table 3 Field A------outer join
then you get the out put as per your requirement
Regards
Damu

Project Stock report using QBEW and QBEWH tables

Dear All,
First of all Happy New Year to all of you.
Here is my question: I want to build a ABAP report for stock situation for project stock. The report demands the stock by closing month. Suppose I run the report for month 11/2010, it should show the closing stock at the end of the month 11/2010.
Now I am using the values from table QBEW for this purpose.But QBEW table shows only current entries. If a material stock is changed or value is changed, it goes into history table QBEWH.
Now problem is that if I try to make sum of QBEW and QBEWH, the stock value is excessive. Now I am not sure which entries I should consider from QBEWH table for this purpose.
Has anybody worked on similar requirement?
Thanks in advance!
Regards,
Mahendra Dighe

Hi,
Please try the report S_P00_07000140 - Inventory and Raw material for special stock report.
Thanks.
abdul

SAP Query: Duplicte records after joining table CSKT

Guru's,
We have created a query in SQ02 for Z table which has fields with KOKRS and KOSTL as well.
Ztable fields:
PLAN_TYPE
PLAN_PROCESS
KOKRS
KOSTL
We want to display cost center description. SO joining this Z table with CSKT(KOKRS,KOSTL). We are getting duplicate records in output because CSKT has duplicate KOSTL.To solve this, we want fetch Latest KOSTL comparing DATBI GE SY-DATUM.
Can anybody help us how to code this logic in Query. I have gone thru most of the SDN threads but could not find the answer.
Please help us.
Thanks in Advace.
Shreyansh

Moderator message - Duplicate post locked

SAP Query (SQ01) - create and save queryies

Hi Expert;
We wanted to implement SAP query reporting (SQ01) tool, and already developed custom HR infoset and user groups and transported to QAS. We experienced the problem that we can not directly "save" any queries in SQ01. We pretty much have the client opened up and set at "Changes without automatic recording". But keep getting a "transport object create" dialog upon "save" query. But in Adhoc (PQAH), we don't encounter same problem. We wanted our users be able to create and save any queries directly without creating any local objects. Is there another setting that needs to be set?
Thanks for any information that you can provide. Points will be awarded.
Helen

Hello Helen,
in SQ01 you can save queries like in HR Ad Hoc Query (or Infoset query as it is called outside HR).
However this is only possible in the "Standard Area" not in the "Global Area". However as Ad Hoc Query is based on the SQ0x basics it only hides this effect.
If you are doing HR specifics you should consider the documetnation on the special HR switches:
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000076208&
In general if you are new to the topic you should consider the courses BC407 for Query Basics and HR580 for reporting in HR.
Also to get a feeling for the different types of reporting with the InfoSet Query you can look at the following documentation:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/2e7237a323427ee10000009b38f8cf/frameset.htm
HR Reporting Tools -> Sap Query -> InfoSet Query -> Calling InfoSet Query.
Or you can book a special training if you need a contact let me know your email adress
Best regards,
Michael

How to use CDHDR and CDPOS tables

Hello Gurus,
How can the data be extracted from CDHDR and CDPOS tables ?
For example, I want to find the changes for the material master, what is the object need to be given in the OBJECT value etc..
I tried to use restricting the transaction MM02 and the date valid from and to, but it is taking longer time.
Appreciate, if you can provide the objects which can be used to track the changed data like Production orders etc..
Thanks
Aadhya

Hi Aadhya,
For the Change Document Object (OBJECTCLAS), you can use the following item:
MATERIAL = material master
ORDER = production order/maintenance order
EINKBELEG = purchasing document
VERKBELEG = sales document
The Object Value (OBJECTID) is usually the object's number, such as material number, production order number, etc.
Get the Document Number (CHANGENR) and go to CDPOS to see the changes detail.
Regards,
Julian

SAP QUERY using ASSHR and ASSOB tables

Similar Messages

Maybe you are looking for