PR Header customer tab

Hi
I used user exit MEREQ001, it helps in enhancing a tab screen at item level.....but I want to enhance at header level.....
the BADI me_proces_req_cust how is it helpful in this? as if i try to add a screen in the subscreens tab there it says it will generate the changes in cl_ex_me_process_req_cust, which is a std class...
what should be done?
Thanks

I can use that BADI for adding a tab strip to header?
How?

Similar Messages

  • Add Header Custom Tab to PO and Contract

    Dear Gurus,
    I need to add custom tab with WYT3 field to PO and Contract Header.
    Could you please help me to understand how to do that?
    Thank you in advance,
    Fuffo

    Hi Ganga,
    This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
    1. fing out the package or program name for the transaction(by gng in the setting)
    2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
    3.find out the appropriate one by putting in the break point.
    4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
    5. there you will get the fm exit for PBO and PAI as well.
    Hope this might help you in solving the problem.
    Pooja

  • Subsinvprocess in the sales order header --- billing tab and in the custom

    Hello All
    there is a field SubsInvProcess in sales order header - billing- tab and in the customer master - billing tab
    what was the functionality of this field. I never worked with it
    kindly help on this one. 
    Thanks,
    prasad

    Dear Vara prasad,
    The value of this field is if you want to print the invoices that are being posted manually you can activate this field.
    It will be directly proposed from customer master to sales document, where you can change.
    Please let me know if you want any further clarifications.
    Please go through this thread also for further reference.
    Clarification for usage of Subsequent Invoice Processing in Customer Master
    Thanks&Regards
    Raghu.k

  • Display Both Excise Tab And Customized Tab in MIGO header screen

    I want to display both  Excise tab and My customized tab in header screen in MIGO..But I have seen at a time one tab is displaying.Can anybody tell me
    how I want to diplay both tab at a time??

    Hi DEBDATTA PANDA,
    In MIGO - Excise tab is showing as a part of  customization. In PO if tax values are available that values will show in migo(drop down will show  capture/refer /capture+post few more  ) under excise tab.
    pre req. is mat + Vendor +plant need to be excisable .
    Now on your Customized tab is purely a Z development.only you can tell .
    Also , if you are not seeing excise tab in migo , it means either config or master data missing for material code ,  Vendor, Plant
    regards
    manu

  • Hiding a customized tab (from header and item) in ME21N, ME22N and ME23N

    Hi SAP gurus,
    I need to make invisible a customized tab in Po creation(me21n), change(me22n) and display(me23n) in enjoySAP transaction for a particulat Doucument type.
    Please let me know the possibility and the solution to implement.
    Thanks,
    Kishore P

    Hi Kishore,
    The customized tab cannot be made visible or invisible conditionally. Instead you can write some text inside the tab to distinguish between different document types.
    Hope this helps.
    Regards,
    Abhijeet Kapgate

  • Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

    Hello all,
    I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
    We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
    Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields. 
    So, my question is how do I handle line selection in the context of these BAdIs?  Is there a way to know which lines have been selected and then only change the data in those items?
    I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet. 
    I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N.  However, I haven't found a way to work with it.  It doesn't get passed to any of the methods in the BAdIs, as far as I know. 
    January 27, 2012  **************
    We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI.  The lines are in the lt_models table. 
    So, now my issue is getting data to save in ME22N.  When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save.  It does work when I make a change in another field, like changing the description for instance.  I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work. 
    I'm getting the idea that I'm the first ABAP developer to try this...
    Thanks for any help.
    Kind Regards,
    Chris
    Edited by: Chris  Mowl on Jan 11, 2012 10:33 AM
    Edited by: Chris  Mowl on Jan 11, 2012 4:24 PM
    Edited by: Chris  Mowl on Jan 27, 2012 10:57 AM
    Edited by: Chris  Mowl on Jan 27, 2012 2:00 PM

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

    Hi Friends,
    I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
    Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
    For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
    But i want how to add custom tab in which item details were to be attached.
    i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
    And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
    can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
    Thanks a lot in advance.
    Thanks
    Ravi.
    can any one give the solution regarding to the above one.
    Edited by: ravikanth on Jul 23, 2008 8:13 AM

    Hello Priyanka,
    I have the same problem by using Service Ticket in SAP CRM 5.0.
    Did you already solved this issue? If so, can you please provide the solution!?
    How can I activate and check the transfer log?
    Thanks and regards
    Alex

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • Unable to add custom tab in ME21N using BADI ME_GUI_PO_CUST

    Dear All,
    I need one extra tab in Item Details of ME21N.
    This extra tab should have two fields of my own.
    I have put the coding in the SUBSCRIBE method of the implementation of the BADI ME_GUI_PO_POST as follows:
    data: ls_subscriber like line of re_subscribers.
    we want to add a customer subscreen on the item detail tab
      check im_application = 'PO'.
      check im_element     = 'ITEM'.
    each line in re_subscribers generates a subscreen. We add one subscreen in this example
      clear re_subscribers[].
    the name is a unique identifier for the subscreen and defined in this class definition
      ls_subscriber-name = 'Event Details'.
    the dynpro number to use
      ls_subscriber-dynpro = '0001'.
    the program where the dynpro can be found
      ls_subscriber-program = 'SAPLMEPOBADIEX'.
    each subscreen needs his own DDIC-Structure
      ls_subscriber-struct_name = 'ZSM_PO_STRUC'.
    a label can be defined
      ls_subscriber-label = 'Event ID'.
    the position within the tabstrib can be defined
      ls_subscriber-position = 5.
    the height of the screen can be defined here. Currently we suport two screen sizes:
    value <= 7 a sevel line subscreen
    value > 7  a 16 line subscreen
      ls_subscriber-height = 7.
      append ls_subscriber to re_subscribers.
    I put breakpoints in the implementation of the method, and it is going into it, yet the extra tab is not getting displayed on the screen.
    Please give your suggestions on this.
    Regards,
    Prosenjit.

    Hi Prosengit,
    I am not aure about u r BADI,
    BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
    IN thi senhancement u have thrre screen exits.In this enhancement
    SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
    u can add subscreen and u can add u r own fields here .
    and u can write u r code in 'EXIT_SAPMM06E_006'.
    if u want to change the title of the program.
    Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
    I hope this solves u r problem.

  • Custom tab field is missing in me21n

    hi all,
    i am doing one enhancement work.
    requirement is custom tab with custom field creation in me21n Tcode.
    i have created all the things using user exit and its working fine also.but now  inside the tab field is not displaying.
    i dont know what happen, pls some one help me its very urgent.
    thanks & Regards,
    S.Kavitha

    Hi ,
    Please find the below screenshot.it is used to add custom tab in header level or item level also.once you added the field in layout,active the layout screen and also active the Enhancement .
    Regards ,
    Karthikeyan R

  • Debit/Credit indicator in header tax tab in MIRO transaction

    Dears,
    would it be possible to let me know if it's possible and how the debit/credit indicator can be included in the MIRO header tax tab?
    I'm working on a 4.6 SAP R/3 system and I have been looking to customizing settings related to the issue that I've just explained to you, but, up to now, I do not have found the point in SPRO transaction from which this function might be maintained.
    Any help would be appreciated!
    Thanks in advance
    Davide

    i hope you already know this
    in Va05 further selection criteria check thes  sales document type is there or not
    if not
    SPRO-SD-Sales-list-define selection criteria prgram SAPMV75A Display variant "k"  enter the sales document type field and save
    in Va05 create a variant for a required sales document type excluding Debit and credit document types.
    this is only my observation likes points...

  • Update fields from custom tab in selected lines in ME22N

    Hello all,
    I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
    We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
    Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
    So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
    I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
    I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
    Thanks for any help.
    Kind Regards,
    Chris

    Hi, i understand
    if you are sure that if with MEPO1211-TCSELFLAG  this variable you can able to get,
    even though it is not been passed to BADI, you can achieve it to get the variable.
    Just try as follows,
    DATA lv_head_ptr(30) VALUE '(SAPLMEGUI)MEPO1211'.
    FIELD-SYMBOLS: <l_MEPO1211> TYPE MEPO1211.
    ASSIGN (lv_head_ptr) TO <l_MEPO1211>.
    Now, <l_MEPO1211> will contain the structure of the MEPO1211.

  • Custom tab not reflecting in ME21N & ME22N

    Hello,
    I need to add an additional tab on the Header level of PO. I have implemented the BAdI ME_GUI_PO_CUST & ME_PROCESS_PO_CUST as specified in the sample example.
    However, I'm unable to see the custom tab in ME21N & ME22N, whereas I can see the tab in ME23N.  I have code in the method FIELDSELECTION_HEADER but it doesn't stop at breakpoints when I run ME21N & ME22N. 
    When I debug, I can see the breakpoints but the program never reaches them. 
    Thank you for any help on this and implementing these BAdIs in general.  This is the first time I have worked with these BAdIs and it has proved to be very frustrating. 
    Kind regards,
    Chris Mowl

    Hi Chris,
    Madhu is right. Check the point he suggests. For instance in IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER
      DATA: l_persistent TYPE mmpur_bool,
            l_changeable TYPE mmpur_bool.
    * if the item is already on the database,
    * we disallow to change field badi_bsgru
      l_persistent = im_header->is_persistent( ).
      l_changeable = im_header->is_changeable( ).
    * after coding
       IF CONDITION IS TRUE.
          IF l_changeable = 'X'.
            <fs>-fieldstatus = '.'. " READY FOR INPUT
          ELSE.
            <fs>-fieldstatus = '*'. " view
          ENDIF.
        ELSE.
          <fs>-fieldstatus = '-'.    "SUPRESS IT
        ENDIF.
    Remember note, if all fields that you add are suppressed, then the dynpro will not be viewed.
    I hope this helps you
    Regards
    Eduardo

  • Adding a custom tab in Purchase Order with two fields - ME21N

    Hello Experts,
    My requirement is to add a custom tab with two fields in purchase order at header level.
    The BADI ME_PROCESS_PO_CUST is alreday implemented previously as there was one custom tab added previously in header.
    The structure  CI_EKKODB already have the custom fields for the enhancement done earlier.
    Now to add my additional tab how should i proceed ....should i put my additional fields in the same structure and write my code in same BADI.....will there be any impact on already done enhanecement.
    Please suggest in achieving this functionality.
    Thanks,
    Naveen

    Hi,
    Check this [wiki|http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29], it tells you how to do with an example for item data.
    Regards,
    Eduardo

  • Rfx Custom Tab(Table) Value not mapping in Change Doc BADI

    Hi,
    I am currently adding Custom Tab with Table in SRM Rfx Webdynpro Screen SRM PPS 7.01 Extended classic . I did the configuration steps to add the custom table, visibility setups, created a new Webdynpro, enhanced in Component controller and could get current active instance Rfx values.
    In local memory using a class method i am exporting custom tab values to Change Doc BADI and updating the et_hcf with the custom values.
    The values are getting saved in the data base and i am able to get it via function module and show in the screen again.
    My Problem is when i am modifying a saved Rfx it saves the entry another time. When i debug the change doc badi i could see all the time the et_hcf and it_hcf is coming empty in the first place and each time the entries from screen are consider as new entries and getting saved in DB.
    I have created Custom tab with table in Contract screen, PO Header and shopping cart line item. Rfx screen is little different and not getting the et_hcf value again in Change Doc BADI. Do anyone have similar issue in handling Rfx.? Please help me. I can Change my code logic and fix this problem still it looks like a standard bug to me that et_hcf or it_hcf is not getting values to the change doc BADI as it does in PO or Contract. Also let me know if i need to check any of my configuration.

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

Maybe you are looking for