PR not changable after PO & GR created

Hi Gurus,
If PO has been created with reference to PR and GR has been done against that PO,then system still allows to change the PR.
How to stop this?
I had tried "Requirement closed" tab in PO delivery schedule ,but no desired result.
Regards,
Krishna

Hi,
You can control this thru User Exit, Try User Ext- MM06E011 - Activation of requisition block or any other suitable user exit.
Regards,
Vikas

Similar Messages

Time Machine will not backup after an error creating the backup folder.

I have TM that will not make backups anymore after getting an error trying to create the backup folder. It wasn't able to complete that backup so it will not create new ones.
I also have a huge file in the backup directory:"dateofbackupattempt.inprogress". It is 231 Gb as if it was trying to do a complete backup instead of an incremental one.
Any idea how to fix this?
Thanks in advance!

georgefrommosman park wrote:
Thank you Pondini.
The Time Machine symbol in the menu appears as a grey ghost, not the black symbol usually seen.
That sounds like Time Machine is turned OFF (on the Preferences panel).
I assume you clicked the TM icon in your menubar or Dock and selected Back Up Now?
It had not saved a thing and the partial file in the folder was dated back to Feb when it all stopped recording. I repaired the disc again. No issues noted.
That sounds like a backup didn't get started at all.
Tried to restart Time Machine. Same grey ghost.
Do you mean moving the big slider button on the TM Prefs panel to ON, or Back Up Now?
Decided to erase and start anew. Got the message cannot erase as disc cannot be unmounted.
Where to next? Help!!!!
Assuming you were doing Back Up Now, let's see what your logs show. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.
Also either tell us what's on the Preferences panel, or post a screenshot of it.

PO not changable after Release

Dear Friends,
We have PO Release Strategy by A , B, C.
we want to restrict if PO Released by A and B then A cant unrelase the PO wihtout B Release and the same with B & C
at present if PO released A , B and C ... A can unrelease the PO and amending the same...
kindly advice the same
awaiting for ur kind reply
Thanks
Rajesh G

>
Rajesh_k1975 wrote:
> Thanks for your kind reply. our Release Indicator as follows
>
> 1     Cannot be changed
> 2     Changeable, no new determination of strategy
> 3     Changeable, new release in case of new strategy
> 4     Changeable, new release in case of new strat. or val. change
> 5     Changeable, new release if new strategy/outputted
> 6     Changeable, new rel. if new strat. or value change/outputted
>      Changeable, new release in case of new strategy
>
> Release code
>
> 50 A          0
>
> 51 B           0
>
> 52 C          9
>
>
> if i am putting 51 B 1 then after release B PO not coming to C for release.
>
> please advice how can to get
>
> regards,
>
> Rajesh G
Sorry but I am a bit confused Rajesh...actually as per your initial issue we had asked for your Release pre-requsite...how it has been maintained in your release strategy...
Cn you please let us know what is your actual issue?
Regards,
Indranil

Files not found after executable is created

I have created a simple data base tool for writing and reading information from excel. When run in project explorer everything runs fine. But no matter how I build it as a stand alone application I run into a issue of missing files. The intitial star Vi opens fine but when I click to open one of the interfaces lab view starts searching for files that should be part of the install all over the hard drive and eventually gives me the following error. " LabView: An input paramater is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @. The file 'SubDisplayMessage.vi' could not be loaded.
Please help,
Scott

As referenced in Document ID:22H8MDUZ Error 1 or 15 Opening Dynamic VI from LabVIEW Application the remove front pannel was not selected and the Application still does not work. Here is a copy of my build app. Every time and every thing I try as I access a VI other then the start up VI Labview goes looking for files that are part of the build and never finds them.
Attachments:
App build.gif ‏58 KB

Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel

Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.

See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

I have iPhoto 11 installed on my iMac. Has been working for last several months ok. I am trying to create photo books but it gets hung up after I select create book. Does not create the project. Used to work but won't create any projects

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

After downloading Mozilla Firefox 4.0 Beta to my desktop I restarted the computer, but I do not receive any prompts to create an account with a Secret Password. How do I set up the account if the prompt never show up?

Several months ago I installed the Firefox Home app on my iPhone to sync the bookmarks that I had on my Windows XP home computer. It has worked just fine until a few days ago. Just recently I was notified that the app would no longer work because of changes that have been made. I have tried to follow the instructions that were emailed to me regarding how to setup the new Firefox Sync add-on, but I am having a problem. After downloading Mozilla Firefox 4.0 Beta to my desktop and restarting my computer, I do not receive any prompts to create an account with a password and a secret phrase, as the instructions specify. How do I set up the account if the prompt never shows up?

Click on the Firefox button then select Options to open the Options dialog. Now go to the Sync panel for the option to setup a new account.

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

How to create credit note automatically after PGR?

Hello SD Gurus,
Client's Business Process: Return Order (ZRE, ZPOR, ZARE, and ZMTR) is created with reference to billing document number and item category used for this order type is REN or ZREN. After the order is created, they do PGR (Return Delivery Type is LR) and then credit memo is created "manually". So, the issue with this process is that it is very time consuming and a lot of manual intervention is required.
To-be Process: The requirement is to create credit note "automatically" after the PGR is done to reduce the manual intervention and expedite the process. If item category is REN, then credit note will be created with invoice value. If item category is ZREN, then credit note will be created with Zero Value.
How should I write code in the user exit MV50AFZ1?
Regards,
Mohammed Anwar

Hi
Apart from Lakshmipathi's suggestion you can share the below logic with your ABAPER. There are two BAPIs we use to create billing automatically. Check whether you can call these BAPIs in userexit you have mentioned in your post.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
* EXPORTING
*   CREATORDATAIN         =
*   TESTRUN               =
*   POSTING               =
        TABLES
          billingdatain         = billingdatain
          conditiondatain       = conditiondatain
*   CCARDDATAIN           =
*   TEXTDATAIN            =
*   ERRORS                =
          return                = return3
          success               = success
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      READ TABLE return3 WITH KEY type = 'E'.
      IF sy-subrc = 0.
        record-inv_rem = return3-message.
      ENDIF.
      WAIT UP TO 2 SECONDS.
*      READ TABLE return3 WITH KEY type = 'E'.
*      IF return3-type = 'E'.
*        WRITE:/ return3-message.
*      ENDIF.
      READ TABLE success INDEX 1.
      CLEAR: vbeln_vf.
      vbeln_vf = success-bill_doc.
    ENDIF.
Thank$

TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

Thomas,
FWIW, speaking from experience with the Save As route, I've seen
random "phunnies" in the final PDFs (such as the missing fonts
issues), a bigger .tps file than the .ps file generated from directly
printing to file, slower throughput in both the intermediate
postscript file creation and actual distilling (probably tied in to
the larger .tps file) and other differences from what the joboptions
should have been.
There should not have been any differences in the file sizes being
created if the same printer instance/configuration was actually being
used. I also see this on some automated runs with Miramo. It's not
consistent either - sometimes it works fine and then the next run, the
process is considerably slower and there are dropouts in the PDFs.
So far, manually printing to a ps file and distilling always seems to
work without any issues.
Your mileage may vary.
Arnis

How to create Delivery Note automatically after realising SO in VKM3

Hi,
I've realesed a Sales Order in VKM3 that was blocked by credit limit. I would like Delivery Notes/Orders to be automatically created once the Sales Order have been released. Is there any kind of configuration that has to be made so that this can happen?
Thanks for your help!

Did you try in T.code VOV8, in the sales document type by setting value A in the immediate delivery field.
Note that this will impact all the sales orders, even those orders not going into credit hold.
Regards,

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

ODI Procedures not working after upgrading from 10G to 11G

Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
Thanks

If you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ?

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

PR not changable after PO & GR created

Similar Messages

Maybe you are looking for