PR Release Duration
Hi,
I want the duration taken for release of PR.
I have the PR Creation Date but not the timestamp.
I have the released date and timestamp for all levels.
So I need the duration for release .
All this I need for a report having the below details.
PR number
PR Creator
PR Approver
PR Approved Duration
Can anyone help regarding this?
Thanks in advance.
Hello,
The first two you can get from whatever table the PR is stored in (EKKO?),
the last two from tables:
SWWWIHEAD
SWWUSERWI
SWW_CONTOB
SWW_CONT
SWWLOGHIST
But first, before resorting to the tables, see how much of it you can get from the SAP_WAPI function modules like
SAP_WAPI_GET_WORKITEM_DETAIL, SAP_WAPI_WORKITEM_RECIPIENTS, SAP_WAPI_WORKITEMS_TO_OBJECT.
regards
Rick Bakker
Hanabi Technology
Similar Messages
-
How to set the Expiration Date for a task which is been assigned explictly.
Hi,
When I assign a task to myself and not work on it for couple of weeks the task is getting released automatically into the original unassigned pool. The TaskActionHandler WSDL is causing that to happen. I don't want a task to be automatically released into the pool when I don't work on it for couple of weeks, how can I make that happen? TaskActionHandler is something which comes with the BPEL so I can't change the way how it behaves. Do I need to set the expiration date or duration explicitly when a task is created?then how do I do that?
If anybody could let me know how to make TaskActionHandler not to release a dehydrated task, I would be glad.
Thanks,
Mythili.Hi,
Make AUTO RELEASE a restricted action for the task by adding the following line:
<restrictedAction>AUTO RELEASE</restrictedAction>
to the <restrictedActions> tag in the task configuration file.
Works effectively.
Alternatively, you can specifiy the auto release durations on a per task priority basis. There is more on that in the BPEL Dev Guide.
Hth, Sjoerd -
Problem in activating BI contents
Hi Experts,
I am trying to activate some BI content ( 0D_PU_C01) Purchasing Data Info cube with collection mode "collect Automatically" & grouping " IN dataflow before & aftrwrds" after transfering seletion when i try to install the same in background system schedules a background Job but when i check the same job through transaction SM37 system shows status as "Released" & Duration seconds shows 0 but delay seconds coulmn shows seconds by which job is delayed i even tried to install this same info cube in foreground but that is also not working out.
When i do transfer selection in right hand side split window object shows green indicator mentioning "Active version available"
Pls help in installing this infocube.
Regards
SushantHi,
1. Navigate to the Administrator Workbench to install Business Content (selection of objects, settings for the transfer, starting the transfer).
2. Assign relevant source systems.
3. Group objects to be included, determine mode of collection for the objects.
4. Determine the view of the objects.
5. Transfer the objects in Collected Objects.
6. Check the settings for the Collected Objects with reference to the Install,Match or Copy and Active Version Available functions.
7. Make settings in the selection list and Transfer.
8. Correct errors
Hareesh -
H264 MPEG AVI import video timeline problem
Hi,
I am a new user of Adobe Premiere CS4. I am having a problem of importing H264 MPEG AVI files. I set my project to be HDV 720p 30fps. I grabbed Gspot and it has identify my video is a H264 codec name H.264/MPEG-4 AVC. When I import the video I setup the timeline and when I do a playback review in the far left window (default setting). It play the vido super fast, but the audio is playing normally. I zoom in the timeline and it seems to think each second is one frame. So it is playing the video like 30x speed(not 100% on how much faster, just lot). What am I doing wrong?
After playing around some more, it looks like the video are keyframes as the time jump from frame to frame is huge, not what it look like in a WMP. Did I somehow imported and it stripped out the deltas?I looked at the thread and tried it, I get this error.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
E:\TEMP>ConvAVI2MPEG.bat
ffmpeg version N-39494-g41a097a Copyright (c) 2000-2012 the FFmpeg developers
built on Apr 3 2012 20:23:48 with gcc 4.6.2
configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-ru
ntime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libope
ncore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --en
able-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger -
-enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwben
c --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-
libxvid --enable-zlib
libavutil 51. 44.100 / 51. 44.100
libavcodec 54. 12.100 / 54. 12.100
libavformat 54. 3.100 / 54. 3.100
libavdevice 53. 4.100 / 53. 4.100
libavfilter 2. 66.101 / 2. 66.101
libswscale 2. 1.100 / 2. 1.100
libswresample 0. 10.100 / 0. 10.100
libpostproc 52. 0.100 / 52. 0.100
[avi @ 0000000001E6EE40] max_analyze_duration 5000000 reached at 5024000
Input #0, avi, from 'SG19.avi':
Metadata:
encoder : VirtualDubMod 1.5.10.2 (build 2540/release)
Duration: 01:04:56.39, start: 0.000000, bitrate: 3426 kb/s
Stream #0:0: Video: h264 (High) (H264 / 0x34363248), yuv420p, 1280x720 [SAR
1:1 DAR 16:9], 29.97 fps, 29.97 tbr, 29.97 tbn, 59.94 tbc
Stream #0:1: Audio: ac3 ([0] [0][0] / 0x2000), 48000 Hz, stereo, s16, 384 kb
/s
[mp4 @ 0000000004490A60] track 1: codec frame size is not set
Output #0, mp4, to 'SG19.mp4':
Metadata:
encoder : Lavf54.3.100
Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuv420p, 1280x720 [SAR 1:1 D
AR 16:9], q=2-31, 29.97 fps, 2997 tbn, 29.97 tbc
Stream #0:1: Audio: ac3 ([165][0][0][0] / 0x00A5), 48000 Hz, stereo, 384 kb/
s
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Could not write header for output file #0 (incorrect codec parameters ?)
E:\TEMP>
I did not use the 32 bit one, but the 64bit. I will try the 32bit one now. Neither one worked. I also went back to an older build that maybe got farther but still failed somewhere else. -
How to make it done?
My client is really worried about their one toll free IVR service, some customers are dialing the trigger and keep connecting like 1500/1600 seconds or more!
How to release the ICM calls after a certain period of time like 300seconds as an example?
Thanks,
Mijanur RahmanI believe there is indeed no real-time field that will tell you the amount of time the call is connected to the IVR by default. But have a look at this and see if it will fit your requirements :
Create a dummy Skill Group without agents in it
As soon as the call enters the system, let it go through a Queue To SG node for that dummy SG
You can now start checking the Call.TimeInQueue variable in your script(s) to identify how long the call has been on the IVR
From there an 'If CallTimeInQueue > 300 ==> End' is easily added to your menu scripts
Do proper testing of this approach before implementing it though. Functionally it should work fine, but if you're not careful, it may result in drastically different reporting figures. Also, be aware of CSCti54657 , this defect affects the Call.TimeInQueue values on the latest UCCE releases. TAC will be able to help you on getting a fix if you would be affected.
Cheers,
Kris -
Error while executing the sp ORA-21779: duration not active
Hi there,
am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 and facing typical type of error
please find the steps below to reproduce it
in this basically i will pass a comma seperated values and function will return the
piped table witheach seperated values as new record
ex :1,2,3,4
1
2
3
4
Types created:
1) Create Type TPOBJ_Return as Object (tnames varchar2 (2000));
2) Create Type TPObjT_ReturnColl as Table Of TPOBJ_ReturnTable;
Function created:
CREATE OR REPLACE FUNCTION WB_FN_ReturnTable
tNameString IN VARCHAR2
RETURN TPObjT_ReturnColl
PIPELINED
AS
iOptionSel INT;
tOptionSel VARCHAR2 (9);
iLen INT;
tName VARCHAR2 (50);
tTempChar CHAR (1);
ptNameString VARCHAR2(2000);
BEGIN
ptNameString:=tNameString;
iLen := LENGTH(TRIM(ptNameString));
iOptionSel := 1;
tName := '';
WHILE iOptionSel <= iLen
LOOP
tTempChar := SUBSTR(ptNameString, iOptionSel, 1);
IF tTempChar = ',' THEN
IF LENGTH(TRIM(tName)) > 0 THEN
PIPE ROW(TPOBJ_Return(tName));
END IF;
tName := '';
ELSE
tName := tName || tTempChar;
END IF;
iOptionSel := iOptionSel + 1;
END LOOP;
IF LENGTH(TRIM(tName)) > 0 THEN
PIPE ROW(TPOBJ_Return(tName));
END IF;
return;
END;
Table created:
Create Table test (id number(16))
Insert into test values (1)
Please insert from 1 to 10.
Stored procedure created:
Create or replace procedure Sptest
As
Titems Varchar2(255);
pvalue Number(16);
Begin
Titems :='5,4,3';
Select MIN(id) into pvalue from test where id not in
(select tnames from table(WB_FN_ReturnTable(Titems )));
End;
Note:
while executing the sp for the first time am not getting any error
only ,if making a repeated call for execution then am gettings the errors specified below
ORA-21779: duration not active
ORA-03113: end-of-file on communication channel
ORA-03114: not connected to ORACLE
can anyone help me on these issueWhy a pipeline table function? I would not say that a tokeniser function is something that typically should require working in the SQL engine, piping rows. It can be a very straight forward PL/SQL function that returns a collection of strings.
E.g.
SQL> CREATE OR REPLACE function tokenise( line varchar2, separator varchar2 DEFAULT ',' ) return TStrings AUTHID CURRENT_USER is
2 strList TStrings;
3 str varchar2(4000);
4 i integer;
5 l integer;
6
7 procedure AddString( s varchar2 ) is
8 begin
9 strList.Extend(1);
10 strList( strList.Count ) := s;
11 end;
12
13 begin
14 strList := new TStrings();
15
16 str := line;
17 loop
18 l := LENGTH( str );
19 i := INSTR( str, separator );
20
21 if i = 0 then
22 AddString( str );
23 else
24 AddString( SUBSTR( str, 1, i-1 ) );
25 str := SUBSTR( str, i+1 );
26 end if;
27
28 -- if the separator was on the last char of the line, there is
29 -- a trailing null column which we need to add manually
30 if i = l then
31 AddString( null );
32 end if;
33
34 exit when str is NULL;
35 exit when i = 0;
36 end loop;
37
38 return( strList );
39 end;
40 /
Function created.
SQL>
SQL> select * from TABLE(Tokenise('col1,col2,col3,,col5,and so on'));
COLUMN_VALUE
col1
col2
col3
col5
and so on
6 rows selected.
SQL>
PS. The TStrings SQL user type is declared as a table of varchar2(4000). -
SQL Server Agent Job Duration monitor alerts incorrectly
As per SQL Server MP guide, changes in Dec 2007 update : Fixed a script that was resulting in invalid alerts being generated from the agent job's Job Duration monitor.
In my SCOM 2012 environment on few SQL servers I'm getting an alert from Job Duration monitor for SQL jobs that have completed well within the defined thresholds. Interestingly this monitor then resets on its own(The monitor has been initialized for
the first time or it has exited maintenance mode) and immediately turns critical again. I do not see any pattern around these state changes. These are weekly jobs, however the Job Duration monitor continues to alert for these specific jobs 10-15 times a day.
This is creating unnecessary noise in the environment.
Is anyone else facing this issue? I know I can disable this default monitor and create my own monitor. However I want to check if this is a known bug in this SQL MP(version 6.4.1.0).
Note : I'm aware about an updated MP version 6.5.1.0, however the release note doesn't specify if it fixes this issue.
Thanks,
Harry
Thanks, Harry :-)Resolution: The issue was that the SCOM Agent was getting restarted repeatedly. Post restart health calculation was done again and the SQL Job duration monitors would reset and generate new alerts.
There is a recovery configured in an aggregate monitor to restart the SCOM Agent if Handle Count/Private Bytes of Health Service/Monitoring Host breach a set threshold. I had to create an override to change the thresholds for all Health Service/Monitoring
Host and exclude the recovery on Physical servers.
If there are large number of workflow on an SCOM Agent due to multiple MP(SQL, HP, etc.), the increase in Handle Count/Private Bytes is usual.
Thanks, Harry :-) -
User Exit for Purchase Order Release Strategy
Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
MickHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren -
Re: [Fwd: Java Applet IIOP Call-In with Release 3C--How dowe speed up d
Hi Michael,
We have done exactly what you describe and have avoided the slow applet
download times. Although it can be a bit tricky, it is possible to use
the ORB bundled inside the Netscape 4.0 browser (Visibroker for Java by
Visigenic). Most of the code should follow Netscape's examples (on
http://developer.netscape.com)--just remember to initialize the ORB by
passing a reference to the current applet in orb_init() (so that you
invoke something like orb_init(this) [assuming you are extending
java.applet.Applet]). Pulling up the Java console within your web
browser should help debug quite a bit (a lot of debug messages will get
printed there the ORB is having problems).
Netscape has just implemented the applet caching schemes you describe,
so it probably shouldn't matter too much if you use another vendor's
ORB (we've done this with Iona's OrbixWeb). If you use ZIP files, they
have to be uncompressed, and I don't think that the browser will cache
them between browser sessions. Netscape 4.0 does seem to handle
compressed JAR files just fine and it does indeed cache them between
browser sessions. I'd go with the JAR format anyway since the ZIP
bundling was just a workaround until Sun got their act together in the
1.1 JDK.
By the way, you also might want to take advantage of the code-signing
and capabilities APIs of Netscape if you are going to invoke methods on
objects not resident on your web server. Otherwise, you will probably
run into the (in)famous browser applet security restrictions and you may
have other problems doing things like callbacks from Forte, etc.
If you want more detail on how it works, let me know and I can post some
examples.
Oh, one last thing: we are a consulting firm specializing in these kinds
of things :)
Bill
Subject: Java Applet IIOP Call-In with Release 3C--How do we speed up download time.
Date: Wed, 2 Jul 1997 09:10:31 -0500
From: Michael Nelson <[email protected]>
To: "'[email protected]'" <[email protected]>
We have successfully implemented a simple Java Applet that calls into
Forte Services via IIOP. However, the duration of the download time
for
Applet and its required class files is UNACCEPTABLE in a typical
INTERNET environment where 28.8K modems and multiple hops around the
net
are not uncommon. We dialed into our network at 28.8K (but no
hopping),
and found that download times varied from 1.5 - 2.0 minutes. This is
unacceptable, even by internet standards. We have been using the
Visigenic Visibroker product as the ORB.
After doing some investigation, we've come up with several ideas to
speed up download time:
1. Figure out how to use the Visigenic components (CORBA/IIOP class
files) that come bundled with the latest version of the Netscape
Navigator browser, so that they don't have to be downloaded
2. Figure out how to use ZIP files. Here's what I've read: "Since
the
introduction of Netscape Navigator 3.0, you can specify an
uncompressed
.zip file as an addition to the code base of your application. By
specifying a ZIP file, the browser will load your applet's classes
from
a specified ZIP file before it searches the code base. This ZIP can
improve applet download time by reducing the number of HTTP
connections
required to fetch applet code. As an added benefit, Netscape caches
the
single ZIP file so that it will not reload your applet unless the date
of the ZIP file has changed."
3. Figure out how to use JAR files. Here's what I've read: "JAR
stands for Java archive. It's a file format based on the popular ZIP
file format and is used for aggregating many files into one. Although
JAR can be used as a general archiving tool, the primary motivation
for
its development was so that Java applets and their requisite
components
can be downloaded to a browser in a single HTTP transaction, rather
than
opening a new connection for each piece. This greatly improves the
speed with which an applet can be loaded onto a web page and begin
functioning. The JAR format also supports compression, which reduces
the
size of the file and improves download time still further."
Unfortunately, we've been unable to get any of these approaches to
work.
Has any one used these or other approaches to speed up applet
download
time? Or, does anyone know of consulting firms that specialize in
this
sort of thing?
Thanks in advance for your help.
Mike Nelson, Project Leader
Metrix, Inc.
[email protected]
414-798-8560 x1157
Billy L. Williams, Jr. | email: [email protected]
Sage Solutions, Inc. | Tel: (415) 392-7243 (x506) Fax: (415) 391-3899
| Pager: (415) 605-1791 (page me if urgent)Hi Michael,
We have done exactly what you describe and have avoided the slow applet
download times. Although it can be a bit tricky, it is possible to use
the ORB bundled inside the Netscape 4.0 browser (Visibroker for Java by
Visigenic). Most of the code should follow Netscape's examples (on
http://developer.netscape.com)--just remember to initialize the ORB by
passing a reference to the current applet in orb_init() (so that you
invoke something like orb_init(this) [assuming you are extending
java.applet.Applet]). Pulling up the Java console within your web
browser should help debug quite a bit (a lot of debug messages will get
printed there the ORB is having problems).
Netscape has just implemented the applet caching schemes you describe,
so it probably shouldn't matter too much if you use another vendor's
ORB (we've done this with Iona's OrbixWeb). If you use ZIP files, they
have to be uncompressed, and I don't think that the browser will cache
them between browser sessions. Netscape 4.0 does seem to handle
compressed JAR files just fine and it does indeed cache them between
browser sessions. I'd go with the JAR format anyway since the ZIP
bundling was just a workaround until Sun got their act together in the
1.1 JDK.
By the way, you also might want to take advantage of the code-signing
and capabilities APIs of Netscape if you are going to invoke methods on
objects not resident on your web server. Otherwise, you will probably
run into the (in)famous browser applet security restrictions and you may
have other problems doing things like callbacks from Forte, etc.
If you want more detail on how it works, let me know and I can post some
examples.
Oh, one last thing: we are a consulting firm specializing in these kinds
of things :)
Bill
Subject: Java Applet IIOP Call-In with Release 3C--How do we speed up download time.
Date: Wed, 2 Jul 1997 09:10:31 -0500
From: Michael Nelson <[email protected]>
To: "'[email protected]'" <[email protected]>
We have successfully implemented a simple Java Applet that calls into
Forte Services via IIOP. However, the duration of the download time
for
Applet and its required class files is UNACCEPTABLE in a typical
INTERNET environment where 28.8K modems and multiple hops around the
net
are not uncommon. We dialed into our network at 28.8K (but no
hopping),
and found that download times varied from 1.5 - 2.0 minutes. This is
unacceptable, even by internet standards. We have been using the
Visigenic Visibroker product as the ORB.
After doing some investigation, we've come up with several ideas to
speed up download time:
1. Figure out how to use the Visigenic components (CORBA/IIOP class
files) that come bundled with the latest version of the Netscape
Navigator browser, so that they don't have to be downloaded
2. Figure out how to use ZIP files. Here's what I've read: "Since
the
introduction of Netscape Navigator 3.0, you can specify an
uncompressed
.zip file as an addition to the code base of your application. By
specifying a ZIP file, the browser will load your applet's classes
from
a specified ZIP file before it searches the code base. This ZIP can
improve applet download time by reducing the number of HTTP
connections
required to fetch applet code. As an added benefit, Netscape caches
the
single ZIP file so that it will not reload your applet unless the date
of the ZIP file has changed."
3. Figure out how to use JAR files. Here's what I've read: "JAR
stands for Java archive. It's a file format based on the popular ZIP
file format and is used for aggregating many files into one. Although
JAR can be used as a general archiving tool, the primary motivation
for
its development was so that Java applets and their requisite
components
can be downloaded to a browser in a single HTTP transaction, rather
than
opening a new connection for each piece. This greatly improves the
speed with which an applet can be loaded onto a web page and begin
functioning. The JAR format also supports compression, which reduces
the
size of the file and improves download time still further."
Unfortunately, we've been unable to get any of these approaches to
work.
Has any one used these or other approaches to speed up applet
download
time? Or, does anyone know of consulting firms that specialize in
this
sort of thing?
Thanks in advance for your help.
Mike Nelson, Project Leader
Metrix, Inc.
[email protected]
414-798-8560 x1157
Billy L. Williams, Jr. | email: [email protected]
Sage Solutions, Inc. | Tel: (415) 392-7243 (x506) Fax: (415) 391-3899
| Pager: (415) 605-1791 (page me if urgent) -
IPhoto '09 version 8.0.3 released today
*Back up* and upgrade - mine went fine
http://support.apple.com/kb/HT3532
http://support.apple.com/downloads/iPhoto8_0_3Update
http://support.apple.com/downloads/iLifeSupport_9_03
http://support.apple.com/downloads/DigitalCamera_RAW_Compatibility_Update_26
Apple today released iLife Support 9.0.3, iMovie 8.0.3, iDVD 7.0.4 and iPhoto 8.0.3 via their Software Update utility and on the Web. According to the release notes, the iLife 9.0.3 update addresses general compatibility issues, improves overall stability for the Media Browser, and fixes a number of other minor issues. The update is recommended for all users of iLife '09, iWork '09, and Aperture 2 and requires Mac OS X 10.5.6 or later.
The iMovie 8.03 update addresses general compatibility issues, improves overall stability and fixes a number of other minor issues. The issues addressed include support for 720p AVCHD Lite cameras and camcorders, deleting a beat marker no longer modifies the project duration, and the Video Effects palette now uses the correct thumbnail for still images. The iMovie 8.03 update is recommended for all users of iMovie '09 and requires Mac OS X 10.5.6 or later.
The iDVD 7.0.4 update addresses general compatibility issues and fixes an issue where iDVD is unable to add title/comment to an image in the image details list. This update is recommended for all users of iDVD version 7 and requires Mac OS X 10.5.6 or later.
The iPhoto 8.0.3 update addresses general compatibility, improves overall stability and fixes a number of issues. This includes slideshow playback, location (GPS) info embedded in emailed photos and exported JPEGs, and publishing to MobileMe, Facebook, and Flickr. The iPhoto 8.0.3 update is recommended for all users of iPhoto 8.x and requires Mac OS X 10.5.6 or later.
Apple also released Camera RAW Compatibility Update 2.6 today. This update extends RAW image compatibility to Canon EOS 500D, Canon Rebel T1i, Canon EOS Kiss Digital X3, Nikon D5000, and Olympus E-30 cameras in Aperture 2, iPhoto '08, and iPhoto '09.
LN
Message was edited by: LarryHNWilliam @ Quebec wrote:
*Yeah I am having the same problem too.*
I have read the posts. Deleting com.apple.iphoto in the ~/Library/Preferences?? Can't find it.
Open the finder, then go to your home folder, then Library, then Preferences. The file is in there and called com.apple.iphoto.plist. Make sure to move it to the Trash.
And Deleting the com.apple.iPhoto.plist is a *very bad idea!*
How so? It's actually not that bad, you'll just need to reset some of your iPhoto preferences which shouldn't take long. All the critical information is actually stored inside your iPhoto library and not in the preferences file. -
ORA-21779: duration not active error line 25 of MDSYS.AGGRUNION
I execute the following pl/sql (line 56/57 in
a procedure called RebuildSMZLabels)....
v_query := 'SELECT /*+ INDEX ( A BASE_SMZ_A_SHAPE ) NO_INDEX ( A BASE_SMZ_A_RETIREDATE ) */ MDSYS.SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(a.s
hape,:1)) FROM &owner.base_smz_a A WHERE MDSYS.SDO_RELATE(a.shape,:2,''mask=ANYINTERACT querytype=window'') = ''TRUE'' and retiredate is
null';
EXECUTE IMMEDIATE v_query INTO v_union_shape USING v_diminfo(1).sdo_tolerance, v_trans_shape ;
And I get...
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at line 1
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 57
ORA-06512: at line 5
Got me beat... anyone got any ideas?
Simon Greener
GIS Manager
Forestry TasmaniaDan
I reverted to the old 8i code (with individual
UNIONS) and it still fails:
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.SDO_3GL", line 439
ORA-06512: at "MDSYS.SDO_GEOM", line 3096
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 74
ORA-06512: at line 5
Line 74 is:
v_union_shape := MDSYS.SDO_GEOM.SDO_UNION(v_union_shape,v_diminfo,v_shape,v_diminfo);
Any ideas as I need this to work in 9i ASAP (as it
doesn't work in 8i)?
PS Dan, it is the same database/code problem I sent
to you earlier this year. It is getting to the point
that I am going to have to rebuild all this database
centric code (which is where it needs to be in the
business process) within our GIS (ArcInfo) which is going
to be far more complex and not sustainable in the medium
term.
regards
Simon -
Dear Guru,
We have three types of contracts like A type, B type, C type......with these three types of contracts we have release strategy with different conditions.
For A type of contract : Release Strategy should trigger on cost center and value base.
For B Type of Contract : Same conditons like above.
For C type of contract : it should trigger on duration base like.....if contract create for one year itshould trigger manager........if one year to two years it should trigger to director........if above two years it should trigger to CEO.
This is my requirement.....how to configure this pls explain me.
Best Regards,
Bhaskar.Hi,
You can only have one class and so you will have to use all of the characteristics from each type of check that you want.
So you would need a characteristic of Cost centre, one for Value and one for start and end date. (in addition to whatever characteristic you are using to determine if the contract is type A, B or C.)
With the release strategies you need to ensure that for type A and B contracts the date range characteristic is not checked and so you need to specify that all date ranges are included (so if the difference between the two dates is one day to 999 years).
then on the release strategy for the type C contract, make sure that the cost centre and value characteristics are set to include all too (so cost centre 0000 to ZZZZ and value from 0.01 to 9999999, if you don't want either to be checked).
this should work, the basic idea is that you ahev to have ALL characteristics included in every strategy but you use the values to make sure that you ignore certain characteristics in certain situations.
Steve B -
Purchase Requistion release date as system date
Dear Experts,
Our Requirement is the top management want to know time taken to release a purchase requisition,means the duration
between purchase requisition creation date to release date.
here user are manually changing the release date to system date to know duration exact time duration between the creation date and release date,so user requirement is the release date should be system date so he can easily understand when the requisition is released.
we are thinking that,if we make the release date as system date,please suggest me.
Thanks in Advance.
VarunDear Madhu,
1.) Whenever you are creating a new PR system will automatically take that PR creation date as system date.
2.) All the releases in SAP System will be recorded as Item/Header change and system will maintain their history in Item/Header change details
3.) If your requirement is to track the duration between creation, release of levels it can be very much possible by creating a quary it self.
Regardsu2026
Srini Rao -
Human Task Auto Release Default and configuration question in 11g
Is there anyway to turn off the auto release feature of a human task if you do not put an expiration date on a task? Also the documentation says the default is 12 hours. If there is not a way to turn off the auto release feature, can the 12 hour default be changed? The documentation is not fully clear to me and then when I look at the UI from the console I do not understand what the identifiers of P5D, P4D, etc mean under the Default Duration column. I get the use of percentage but it is unclear what Default Duration is and how to use that field.
I saw in 10.1.2 there was a way to turn off the auto release feature of task via restrictedActions but I did not see this in 11g.
And last question is does anyone know if human task is stored to a database if it runs for too long similar to the concept discussed around bpel processes of hydration and dehydration?
Thanks,
DianeI am able to fix this issue. After a series of R & D I was able to find that the root cause is %APPDATA%\jdeveloper. Deleting the relevant directory will solve this issue. In fact, I tried to delete the entire jdeveloper directory under %APPDATA% and the jdev 11.1.1.7 form generation issue got resolved. Those who find "referential integrity" issue may follow this approach.
This solution also applies to this thread
Auto Generate task Form -
Prime Infrastructure 2.2 Released
For those who haven't noticed, Prime Infrastructure (PI) 2.2 was released on 17 December. The Release Notes, Quick Start guide, etc. are all posted on the PI product support page.
I downloaded the 3.2 GB ova and deployed / installed via vCenter into a VMware ESXi 5.5 environment without issue.
The migration path is to backup your supported earlier version to a repository and then restore from that repository onto the new host. I grabbed a fresh backup of our PI 2.1.2 and followed the guide to restore. It took a while (about 1-1/2 hours to restore and then 30 minutes more to start completely - see output below) but the process ran without a hitch. You do need to make sure that the new host meets or exceeds the hardware specs of the old one - i.e. amount of memory, disk and vCPUs.
My initial look at the new system seems to indicate all is well - I see all the expected maps and devices and old configuration archives were pulled over. I have quite a bit of exercising the new feature set to do but initial indications are promising.
It's good to finally see the Topology map.
- Marvin
PI/admin# show restore log
Started at : Thu Dec 18 11:59:29 2014
Initiating restore. Please wait...
Restore Started at 12/18/14 11:59:36
Stage 1 of 9: Transferring backup file ...
-- completed at 12/18/14 12:00:33
Stage 2 of 9: Decrypting backup file ...
-- completed at 12/18/14 12:05:08
Stage 3 of 9: Unpacking backup file ...
-- completed at 12/18/14 12:05:10
Stage 4 of 9: Decompressing backup ...
-- completed at 12/18/14 12:08:30
Stage 5 of 9: Restoring Support Files ...
-- completed at 12/18/14 12:08:31
Stage 6 of 9: Restoring Database Files ...
-- completed at 12/18/14 12:08:54
Stage 7 of 9: Recovering Database ...
-- completed at 12/18/14 12:36:03
Stage 8 of 9: Updating Database Schema ...
Stage 1 of 5: Pre Migration Schema Upgrade ...
-- completed at: 2014-12-18 12:56:00.638, Time Taken : 0 hr, 14 min, 59 sec
Stage 2 of 5: Schema Upgrade ...
: This could take long time based on the existing data size.
-- completed at: 2014-12-18 13:11:04.244, Time Taken : 0 hr, 15 min, 3 sec
Stage 3 of 5: Post Migration Schema Upgrade ...
-- completed at: 2014-12-18 13:31:26.188, Time Taken : 0 hr, 20 min, 21 sec
Stage 4 of 5: Enabling DB Constraints ...
-- completed at: 2014-12-18 13:31:58.651, Time Taken : 0 hr, 0 min, 27 sec
Stage 5 of 5: Finishing Up ...
-- completed at: 2014-12-18 13:32:22.251, Time Taken : 0 hr, 0 min, 23 sec
-- completed at 12/18/14 13:33:29
Stage 9 of 9: Re-enabling Database Settings ...
-- completed at 12/18/14 13:33:29
Total Restore duration is: 01h:33m:53s
INFO: Restore completed successfully.
Starting PI Server... This may take some time
Starting Prime Infrastructure...
This may take a while (10 minutes or more) ...
Prime Infrastructure started successfully.
Finished at : Thu Dec 18 13:56:36 2014
PI/admin#Hello,
I have a case where customer is restoring backup from Prime Infrastructure 2.1 to 2.2.The zipped DB size is 28GB. It's being more than 29hrs....the restoration process ongoing. Customer is restoring the database from FTP server.
Please find the log from dbadmin_StdOut.log
ade # tail -f dbadmin_StdOut.log
In com.cisco.upgrade.MigrateRFMModel: preMigration()
2.1.0.87 matched within [2.1.0.0,2.1.0.999]
-- completed at: 2015-03-10 17:07:31.928, Time Taken : 0 hr, 14 min, 27 sec
Stage 2 of 5: Schema Upgrade ...
: This could take long time based on the existing data size.
-- completed at: 2015-03-10 17:11:06.612, Time Taken : 0 hr, 3 min, 34 sec
Stage 3 of 5: Post Migration Schema Upgrade ...
In com.cisco.upgrade.MigrateRFMModel: postMigration()
/**** PostMigration SQLs ****/
2.1.0.87 matched within [2.1.0.0,2.1.0.999]
ade # tail -f sqlUpgrade.log
10-MAR-15 05.19.38.743478000 PM +00:00: 10-MAR-15 05.19.38.743411000 PM +00:00:: Beginning upgrade script rootallUrlTask
10-MAR-15 05.19.38.744821000 PM +00:00: 10-MAR-15 05.19.38.744797000 PM +00:00:: get count from xmptask where instancename=rootallUrlTask and urlexpression=.*
10-MAR-15 05.19.38.746149000 PM +00:00: 10-MAR-15 05.19.38.746127000 PM +00:00:: Update xmptask for instancename=rootallUrlTask to exclude credential API
10-MAR-15 05.19.38.746201000 PM +00:00: 10-MAR-15 05.19.38.746188000 PM +00:00:: Committing
10-MAR-15 05.19.38.750147000 PM +00:00: COMPLETED script PI22_upgrade_rootAllUrlTask_Expression.sql execution
10-MAR-15 05.19.38.752041000 PM +00:00: STARTED script setauth.sql execution
10-MAR-15 05.26.40.031852000 PM +00:00: COMPLETED script setauth.sql execution
10-MAR-15 05.26.40.033094000 PM +00:00: STARTED script ifm_sam_pm_ddl.sql execution
10-MAR-15 05.28.15.781912000 PM +00:00: COMPLETED script ifm_sam_pm_ddl.sql execution
10-MAR-15 05.28.15.784297000 PM +00:00: STARTED script PA_Upgrade_2_1.sql execution
Maybe you are looking for
-
Can't install oracle 10g on windows XP(Virtual Box)
Hi all, I have installed windows XP in Virtual Box, trying to install Oracle 10g in it. It won't start the installation..no clue about it. I installed winrar(as the 10g setup was in rar format, had to extract it). without any issues winrar got insta
-
How to determine Last Lite Item of a Main Window in SCRIPTS
Hi All, I have a requirement <b>to print a value after all the Line Items have been printed in a main window.</b> The question is <b>how do I determine the end of Line Items</b>? Also, this needs to be done without a change in the print program. Plea
-
My firefox 4 default theme looks nothing like the one in the video.
I just installed firefox 4. Sadly my default theme looks nothing like the one in the video.. Heres how it looks.. http://i51.tinypic.com/2w5ru4o.png
-
Migration from Windows Live mail to Mac mail
Hello Friends, Please try and help me out as need a solution desperatly. At present, I am using Windows live mail and intend to move from Microsoft to Mac. I have got many emails on my server host which would be easy to migrate as per the normal proc
-
What's the "replacement iPod"?
I was reading the page about iPod battery replacement & in the page I found that you can only change your battery by sending it to the Apple Customer Service along with 99 U.S. Dollars (only if there isn't a warranty on the iPod), So I was wondering