Pr00 missing in webui while creating the transaction in ui

Hi
we have the scenario in crm like opportunity management , quotation analysis where in pr00 condition we have to input .
pr00 condition is mandatory in all the transactions in crm . for this reason pr00 we maintained as mandatory in the pricing procedure and we replicated all the pricing procedures in to crm . and when we tested a transaction in SAP GUI system is giving message as "PR00 is mandatory " and we are going in to item conditions tab and we are entering the pr00 manually .
But the same when we are trying to configure on webui , we added all the fields of gui in to webui by searching the components . and when we run the transaction in webui , system is giving the message "pr00 is mandatory"and when we go into pricing details tab , there is no pr00 in the price type drill down . i cannot input manually the proo in webui ,  i have to select it form drop down list only . but which is not appearing .
please suggest

issue solved

Similar Messages

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • An error occured while creating the original attribute for

    Hi All,
    We encounter  this error in  "An error occured while creating the original attribute for " DMS  very often when a user edits a file & tries to check in.
    I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
    inconsistencies will repair this issue.
    I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
    so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
    Regards
    -Neha

    Hi Neha,
    Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
    DMS_ACTIVE_VERSION 00 Active Version
    DMS_APPLICATION 00 Logical application
    DMS_CHECKOUT_USER 00 Checkout User
    DMS_CREATE_AUDIT 00 Generate new version of the original
    DMS_DEFAULT_LANGUAGE 00 Default Language
    DMS_DELETEABLE 00 PHIO deletable
    DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
    DMS_DOC_VERSION 00 Version of relevant document
    DMS_DRAW_APPNR 00 Application number from DRAW
    DMS_DRAW_DTTRG 00 Data carrier from DRAW
    DMS_DRAW_FILEP 00 File name from DRAW
    DMS_FILE1 00 File name(firstpart)
    DMS_FILE2 00 File name(secondpart)
    DMS_FILE3 00 File name(thirdpart)
    DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
    DMS_FRMTXT 00 Format description, ID of additional file
    DMS_MUP_CAT 00 Markup category
    DMS_MUP_FLAG 00 Markup flag
    DMS_ORDER 00 Sequence of additional files
    DMS_STATUS 00 Document status
    DMS_STATUSNR 00 Number in status protocol
    DMS_STATUSNR_X 00 References to Status Log
    Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
    For further information you can also see the corresponding SDN WIKI page under
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
    Regards,
    Ravindra

  • While creating the Transfer Order system is not picking Sale order stock?

    Hi All,
    In the B2B  process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
    Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
    Regards.

    C S Javali
    Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
    Regards
    Pradeep

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Error while creating the Organization structure.

    Hi,
    I am trying to create an Organization structure in SRM 5 sytem, I have created a Root for the structure and when i try to click on the Attribute Inheritance or the Check tab below i am getting an error "Start program BBP_LOCATIONS_GET_ALL first (see note 563180 and long text)" but i have replicated one plant from the R/3 system using BBP_LOCATIONS_GET_SELECTED and the material groups and all the other relevant datas from R/3. I can see in the table BBP_LOCMAP the plant been associated with the relevant company code. I am now struck in creating the organization structure. I am not sure where i am going wrong while creating the Org model.Please give me your valuable inputs to overcome this error.
    Regards
    GGL

    Go to transaction SM30, table T77S0
    Add an X to the following entry:
    Group = EBP          
    Sem abbr. = LMIGR        
    Val. Abbr. = X       
    Description = Locations Successfully Migrated
    This tell the system that the locations have been replicated and the error indicating location get all needs be executed will go away.
    thanks,
    justin
    Edited by: Justin Farley on Feb 25, 2009 7:16 PM

  • Getting error while creating the Shopping cart.

    Hi ,
    I am getting error while creating the Shopping cart.
    a.Error in account assignment for item 1  (Item  Testing SC ) 
    b.Duplicates of Cost Centre T10063 are defined in SRM  (Item  Testing SC ) 
    Kindly provide the solutions.
    Thanks,
    Dev

    Try the following in the ERP backend system:
    Standard Hierarchy Inconsistencies
    Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
    Update from SAP Global support, the following was the email received:
    in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
    If you think that your standard hierarchy is inconsistent you can check that as following:
    Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
    Alternatively, you can run the report 'RKCORRH1' (TN SE38).
    Run both the Hierarchy->Master data->test and the
    Hierarchy->Master data->comparison.
    As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
    Once the above two are run, again when you go to test, the inconsistency disappears.

  • Error while creating the document

    Hi Experts,
    When i create the document in CV01N transaction and while i try to check in the document in "DMS_C1_ST"  i am getting the error message as * An error occured while creating the original attribute for PDF*.
    Kindly let me know how to resolve this issue.
    Regards,
    Bhanu

    Hi Bhnau,
    could you please check the following link and made sure that the mentioned entries in table SDOKPROP are maintained correctly in your system.
    http://wiki.sdn.sap.com/wiki/display/PLM/Error26296in+CV01N
    Best regards,
    Christoph

  • Material Listing Error while creating the sales order

    Hi Guru's
    I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
    While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
    I have done the basic invetingation on the folowing aspects
    1)checking the material in the listing
    2)Validity periods
    3)Material not blcoked
    4)Mateial is extened for the respective sales org
    Kindly help ASAP.
    Thanks & Regards
    Tarakaram

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Error while creating the product group by MC84

    Hello Friends,
    I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
    Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
       Please guide.

    Dear,
    This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
    Try to create the product group as material of material type"PROD"
    Then you go on adding the memebers in SOP Transaction.
    In some of the versions of SAP it is the problem.
    I have also faced this problem in some versions.
    Regards,
    R.Brahmankar

  • Bank Analyzer - Error while creating the Position Structure

    Hi,
    We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
    We facing an Error while creating the Position Structure,
    Error Message: Status of structure S40CURRACC is "New"
    Anyone has an idea how to fix this?
    Thank you,
    John Crawford

    Hi,
    1.Run Transaction - /BA1/F0_SGS_START
    2.Entered the name of the structure and try to "activate". 
    3.It will get Active without any inconsistency.
    Regards
    Phani

  • Error while executing the transaction QC22 (Quality Certificate for Batch)

    Hello Friends,
    While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
    Message no. ZQ010
    Diagnosis
    Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
    System Response
    The missing charactertistic will not be printed on the certificate,
    Procedure
    Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
    One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
    As i am new in QM, kindly explain we were to maintain the certificate profile.
    Waiting for the experts inputs.
    Thanks and Regards,
    Jitendra Chauhan

    Hi
    Try with QA33 you may have display authorization,  or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
    Regards
    Naveen.
    Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

  • Error message while creating Sales transaction

    Hi Gurus
    While creating a sales transaction in Mobile Sales I am getting the following error message.
    No Valid sales channel exists for this business partner enters a sales channel in the business partner sales area data.
    I have checked in table SMO_KNVV, there is an entry for this business partner. What can be the possible reason? Please help.
    Regards
    Javed

    Hi Javed,
    Your logged employee should also have some sales area assigned to him/her.
    This can be done by assigning you employee to sales position under sales area in CRM Org Management (PPOMA_CRM).
    Once this is done and org. data is replicated to Mobile. you can very much create the transactions without error.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • Fiscal Year Not allowed while creating the Process order (COR1)

    Hi Friends,
    My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
    The Diagnosis shows as below
    Fiscal year 2010 is not allowed
    Message no. F5568
    Diagnosis
    The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
    System Response
    Error.
    Procedure
    Correct the fiscal year entered.
    I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
    Can any one help me where the setting is missing or what whould be the probable reason for this issue.
    Regards,
    Deva

    Hi Prakash,
    Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
    We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
    Is there any other probablity the date is picking from any Production related set ups??
    The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
    Is there any other possibility of the missing settings or problem in date control???
    Regards,
    Deva

Maybe you are looking for