While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

Similar Messages

System should Not copy sales order header text

Hi all,
My requirement is system should not copy sales order header text while copying sales order to sales order with same order type.
for example i have order type OR - standard type with 500 line items with reference to that same sales order we are creating another order with same line 500 line items,but requirement is system should not copy source document header text in to target document header text,
Do you have any standard functionality to avoid this or we need to go exit
Regards
Nishad

Hi,
You can do it via standard SAP configuration.
Transaction VOTXN.
In the access sequence you have the corresponding Text ID added with "Text Object" VBBK. That's the reason why you are copying text.
Change the entry.
Check below link on how exactly to do that. This doc says about how to copy customer text to the sales order. But procedure is same for you as well. Just the object is different.
[Text type config|http://learnsaptips.blogspot.com/2010/09/text-type-configuration-in-sap.html]
Hope it helps!
Best regards,
Rahal

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

Purchase Order quantity must not Exceed Sales Order quantity

Dear Experts
My requirement is when i am creating PO in me21n and taking Document type as Domestic PO and giving account assignmnet as "C" Sales Order, must have to enter Material and quantity and must have to Give Sales Order number and item no in account assignmnet tab , the quantity i am entering in PO must not exceed my Sales Order quantity that is my requirement.
Regards
Abi

Hi,
You do not create a PO with reference to sales order. In PO you enter sales order number for reference. A purchase requsition can be created directly from Sales order or through MRP depending on the system settings. Then this PR can be converted to PO. here you can restrict the quantity. As in order to change the quantity in PR also you will have to change the quantity in sales order.
Regards
Raj

While creating the user getting iPlanetAMUserService does not exist error.

Hi,
I was trying to create a user in access manger 7.1 console . I am getting error like iPlanetAMUserService does not exist.
path: Access control>Realm>Subjects.
can anyone please help me to give the suggestions.
Thanks
GV

And why do you think those jars are required? Guess work? Glassfish already provides them, remove them from the application deployment and try again.

Fiscal Year Not allowed while creating the Process order (COR1)

Hi Friends,
My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
The Diagnosis shows as below
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
Can any one help me where the setting is missing or what whould be the probable reason for this issue.
Regards,
Deva

Hi Prakash,
Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
Is there any other probablity the date is picking from any Production related set ups??
The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
Is there any other possibility of the missing settings or problem in date control???
Regards,
Deva

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Material Listing Error while creating the sales order

Hi Guru's
I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
I have done the basic invetingation on the folowing aspects
1)checking the material in the listing
2)Validity periods
3)Material not blcoked
4)Mateial is extened for the respective sales org
Kindly help ASAP.
Thanks & Regards
Tarakaram

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error while creating the sales order with billing reference

hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

"An error occurred while creating the system proxy" after upgrade to 11.2

Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.

Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ?

Updating the VETVG table while creating the purchase order

hi all,
I have one requirement to calculated the delivery creation date while creating the Purchase Order. It is calculated based on the delivery date of PO. I have calculated that one but how to update it after calculation. Can any body give a user exit or BADI with implementation which will update the VETVG table while creating the PO.
Thanks
rajkumar

hi sanjay,
thanks for reply, I am using same BADI(ME_PROCESS_PO_CUST) and implementation(FIELDSELECTION_ITEM_REFKEYS). In this implementation i am setting the shipping data with SET_SHIPPINGDATA method . but after that the values are not updating the EKPV and VETVG tables but it is only showing in the screen. Can you give a idea where to pass these values so it will update the tables.
thanks
rajkumar

While creating the purchase order

Hi all,
While creating the purchase order I am getting error like No account assignment to customer order (Not Active in co area 1100, Year 2007)
please help me out from this problem
Thanks and regards,
Sreekanth Lokaray

Hi Nazim,
I got the solution by doing the maintain controlling area I activate the sales order.
and In t.code vkoa I have given the condition type for sales organization.
Thanks and regards,
Sreekanth.L

Materialo slip no not updating when creating the transfer posting(MB1B 313)

Hi all
I have a problem in updating material slip no when creating the transfer posting(MB1B 313).
when creating the MB1B if i put the mat slip no manually then system updating in the material doc.
But when system creating the transfer posting(through auto Jobs) the material slip no not updating in the material doc.
this is started to happen only after i deleted the condition records(ZDRL) for printing the doc for a relavent storage location.Kidly let me know is there any relation between ZDRL and the material slip updating.
Thanks
Manju

hi krishan,
Pl ensure that there is any release strategy, or in the transfer posting enter the plant and m.type also storage location in the application tool bar click with reference to PO, and enter the po number and try to proceed. it will work.
Regards,
nagarajan

While creating the Transfer Order system is not picking Sale order stock?

Similar Messages

Maybe you are looking for