Prctl -n project.max-shm-memory -i process $$

Hi all,
when i execute the following command "prctl -n project.max-shm-memory -i process $$"
its output is
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 5.85TB - deny
5.85TB while RAM is only 32GB.
How i can change it for oracle user.

What does your /etc/project file says?
Mine is (showing oracle user):
oracle:100::oracle::process.max-sem-nsems=(priv,300,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,512,deny);project.max-shm-memory=(priv,8589934592,deny)
That is 8 GB RAM allowed for oracle use (max-shm-memory).
Change it using
projmod -sK "project.max-shm-memory=(priv,8G,deny)" oracleJan

Similar Messages

Shminfo_shmmax in /etc/system does not match project.max-shm-memory

If I specified 'shminfo_shmmax' in /etc/system and hava the system default in /etc/project(no change is made), the size of 'project.max-shm-memory' is 10 times larger than 'shminfo_shmmax'.
#more /etc/system // (16MB)
set shmsys:shminfo_shmmax=16000000
#prctl -n "project.max-shm-memory" -i project user.root
=> will display like below.
project: 1: user.root
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 1.49GB - deny -
system 16.0EB max deny
1.49GB is 10 times larger than 'SHMMAX'. If I add more entries /etc/system like below, max_shm_memory will become even larger.
#more /etc/system
set shmsys:shminfo_shmmax=16000000
set semsys:seminfo_semmni=2000
set shmsys:shminfo_shmmni=2000
set msgsys:msginfo_msgmni=2048
After I reboot with the above /etc/system and no change /etc/project(all default, no values added)
# prctl -n "project.max-shm-memory" -i project user.root
project: 1: user.root
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 29.8GB - deny -
system 16.0EB max deny -
Can anyone shed light about this area how to configure SHMAX in /etc/system right?

We saw similar behavior and opened a case with Sun.
The problem turns out to be that the (deprecated) /etc/system to (new) project resource limits isn't always one-to-one.
For example process.max-shm-memory gets set to shmsys:shminfo_shmmax * shmsys:shminfo_shmmni.
The logic here is that under the /etc/system tunings you might have wanted the maximum number of segments of the maximum size so the system has to be able to handle that. Make sense to some degree. I think Sun updated one of their info docs on the process at the end of our case to make this clearer.

Impact of project.max-shm-memory configuration in Solaris 10

Dear All,
I'm not sure if this an error or purposely configured as it is.
Current kernel configuration of project.max-shm-memory is *400Gb* while the hardware only have 8 GB RAM, and SGA_max set to 5GB (ORACLE database is 10g).
Will there be any impact in long run with this configuration based on your experiences?
project: 1: user.root
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged *400GB* - deny -
system 16.0EB max deny -
Suggestions and advices are much appreciated.
Thanks and Best Regards,
Eric Purwoko

Hi Helios,
Thanks!, the recommendation is 4294967295, but my SGA MAX and target is 5 GB. Will it cause problem if I put project.max-shm-memory lower than SGA?
Thanks for the link too. I guess I better put those configuration in /etc/system too.
But now wondering what's the best value looking at my SGA max configuraiton
Best Regards,
Eric

Max-shm-memory Problem - out o memoy. No space on device

Hi Everyone,
First time post. I'm a UNIX SA tying to troubleshhot the problem: On Solaris 10.
SQL> startup pfile=inittest1.ora
ORA-27102: out of memory
Solaris-AMD64 Error: 28: No space left on device
SQL>
u01/app/oracle/admin/dd00lod1/udump/dd00lod1_ora_25782.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/10.2.0.4
System name:    SunOS
Node name:      reuxeuux1089
Release:        5.10
Version:        Generic_147441-10
Machine:        i86pc
Instance name: dd00lod1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 25782, image: oracle@reuxeuux1089
skgm warning: ENOSPC creating segment of size 0000000005800000
fix shm parameters in /etc/system or equivalent
We have tied modifying the max-shm-memory settings, but no joy ! Please assist if you can.
Thanks
Amreek
prctl -n project.max-shm-memory -i project 100
project: 100: ORACLE
NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
project.max-shm-memory
        privileged       124GB      -   deny                                 -
        system          16.0EB    max   deny

consider to Read The Fine Manual; INSTALLATION GUIDE

How to set kernel parameter max-shm-memory automatically at startup

Hi,
We have a 11.1.0.7 Database on Solaris Sparc 10 64-bit server. We have settings of max-shm-memory as below;
-bash-3.00# prctl -n project.max-shm-memory -i project default
project: 3: default
NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
project.max-shm-memory
        privileged      50.0GB      -   deny                                 -
        system          16.0EB    max   deny                                 -
-bash-3.00# prctl -n project.max-shm-memory -i project system
project: 0: system
NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
project.max-shm-memory
        privileged      50.0GB      -   deny                                 -
        system          16.0EB    max   deny                                 -
Whenever we restart the db the second one is lost;
bash-3.00$ prctl -n project.max-shm-memory -i project default
project: 3: default
NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
project.max-shm-memory
        privileged      50.0GB      -   deny                                 -
        system          16.0EB    max   deny                                 -
bash-3.00$ prctl -n project.max-shm-memory -i project system
prctl: system: No controllable process found in task, project, or zone.
So our sys admin has to configure them again whenever we restart our db. How could I do this automatically at startup without counfiguring again from command prompt?
Thanks,
Hatice

Ok it is clear now. I have one more question. When I check system I get below error;
# prctl -n project.max-shm-memory -i project system
prctl: system: No controllable process found in task, project, or zone.
Document says; The reason for the message reported above is because there is no active process(es) belong to the project.
But it is impossible for us because according to our project settings its for root user;
bash-3.00$ cat /etc/project
system:0::root::project.max-shm-memory=(priv,53687091200,deny)
user.root:1::::
noproject:2::::
default:3::oracle::project.max-shm-memory=(priv,53687091200,deny)
group.staff:10::::
oracle:100::::project.max-shm-memory=(priv,53687091200,deny)
Is it because I check with oracle user and I don't have sufficient privileges or there is something wrong with it?
Thanks.

Max-shm-memory - definition

Hi Guys,
I'm trying to get a clear definition on project.max-shm-memory. Lets say its set to 4GB for user.oracle. Does this mean that the maximum amount of shared memory available to the project is 4GB or that the maximum shared memory segment size created by ANY process in the project can be 4GB (i.e 2 processes could create 2 separate 4GB segments)? I'm pretty sure its the former but I wanted to check..
Thanks,
Tony

Even though SUN says many of the kernel tunables are now obsolete in /etc/sytem, some like shmmax actually will still work if reset with the global zone. The default is 1/4 system memory.

Max-shm-memory (Solaris 11.1)

I wonder if someone can give a definitive answer on this, or point me to somewhere that does?
If I have a 64GB RAM server running Solaris 11.1 that will run a single Oracle instance, what is the correct setting to make for max-shm-memory?
Should it be 64GB, or something a bit smaller? Or something a lot smaller?
I have read the installation documentation, but it gives examples of 2gb, 4gb and so on. They don't seem relevant to a 64GB+ server

Thank you, but that document doesn't answer my questions.
Specifically, it states at one point that "project.max-shm-memory=(privileged,51539607552,deny); ... sets a limit of 48GB per shared memory segment" (which is true, as far as I understand it). But it then goes on to say in the next breath that "The project.max-shm-memory limit is the __total__ shared memory size for your project. -- ie maximum total of all your segments.". Which, to my mind, contradicts its first statement.
The article then also goes on to give an example where "This system has 8GB of memory..." and shows the author setting "projmod -s -K "project.max-shm-memory=(privileged,4GB,deny)" 'user.oracle'"... so are we to deduce that you should set max-shm-memory to 50% of your physically-available RAM? Or not??
I had actually read this before I posted. It's the same sort of document I see over and over on this subject: lots of examples, some contradictory, but none stating what principles should govern the setting of max-shm-memory, and none stating what the consequences of (for example) allocating 100% of physically available RAM as max-shm-memory would be.
So thank you for the reference, but my question still stands: can someone provide a definitive answer on what the setting here should be? It's a 64GB server and will run nothing but Oracle database, with a single instance. max-shm-memory should be set to.... what, exactly?

Solaris Environment Manager maxs out memory.

We have a forte system in production, running on two Solaris 2.6 boxes. Each
has its own environment and they are connected. Our environments are called
"Data Center" and "Call Center". Our Forte memory settings are fairly
standard. We start at 20Mb and max out at 64Mb. We also have Forte keepalive
enabled, with the Forte recommended values. We are running Forte 3.0.L.3 and
using Oracle 8.0.5 for our database (as if it mattered). Each environment
has 1 or 2 NT Server boxes in it, and the clients are all NT4 using a model
node. Our Solaris machines have the patch installed that fixes the problem
that Peggy Adrian posted about earlier in the year.
Three times now in the past week, we have suddenly had the environment
manager for the data center suddenly start chewing up memory. When the data
center manager gets to about 64Mb, the data center environment manager
starts to do the same thing. Soon after, both environments die a hideous
death, and we have go in and start the node managers again.
Please note that we always export our environments to a ".edf" file and
bootstrap the environment manager (removing the environment repository)
whenever we install a new copy of the Forte applications, or whenever our
node manager dies (which seems far more frequent that I would like).
Interestingly, the environment repository hadn't grown any after the
environment manager "runs up the curtain and joins the choir invisibule".
If anyone can throw some light on this, and point us in the direction to
look to solve this problem it would be much appreciated.
Nick.

Hi,
@ Sunny: Thanks for response, the referred note was already checked and parameters are in sync as per note.
@Mohit: SAP wouldn't proceed till create database if Oracle software was not installed. thanks for the response.
@Markus: Thanks I agree with you, but I have doubt in this area. Isn't it like project.max-shm-memory was new parameter we need to set in local zone rather using shmsys:shminfo_shmmax in /etc/system. Do we need to still maintain this parameter in /etc/system in global zone.
As per SUN doc below parameter was obsolete from Solaris 10.
The following parameters are obsolete.
■ shmsys:shminfo_shmmni
■ shmsys:shminfo_shmmax
As per your suggestion, do we need to set below parameters in that case, please clarify.
Parameter                           Replaced by Resource Control      Recommended Value
semsys:seminfo_semmni   project.max-sem-ids                      100
semsys:seminfo_semmsl   process.max-sem-nsems               256
shmsys:shminfo_shmmax project.max-shm-memory             4294967295
shmsys:shminfo_shmmni   project.max-shm-ids                       100
Also   findings of /etc/release
more /etc/release
Solaris 10 10/08 s10s_u6wos_07b SPARC
Regards,
Sitarama.

Error when compiling firefox...Out of memory: Kill process 6763

I'm trying to compile the firefox version 15 as both 16.0.1 and I always get the same error, which I think leaves me with no ram even though I have 8 gigs, i try it with 8 gigs of swap but does exactly the same, here are all the facts about this problem, the only thing I have not tried is to change the compiler version, what do you think? this is a clear linkage error where the system breaks down after running out of physical memory...
ERROR--->-using yaourt -Sb or makepkg -s:
/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/toolkit/library/nsUnicharUtils.cpp:275:1: warning: always_inline function might not be inlinable [-Wattributes]
/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/toolkit/library/nsUnicharUtils.cpp:50:1: warning: always_inline function might not be inlinable [-Wattributes]
/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/toolkit/library/nsUnicharUtils.cpp:40:1: warning: always_inline function might not be inlinable [-Wattributes]
rm -f libxul.so
/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/_virtualenv/bin/python /tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/config/pythonpath.py -I../../config /tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/config/expandlibs_exec.py --depend .deps/libxul.so.pp --target libxul.so --uselist -- c++ -pedantic -Wall -Wpointer-arith -Woverloaded-virtual -Werror=return-type -Wtype-limits -Wempty-body -Wno-ctor-dtor-privacy -Wno-overlength-strings -Wno-invalid-offsetof -Wno-variadic-macros -Wcast-align -Wno-long-long -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -fno-exceptions -fno-strict-aliasing -fno-rtti -ffunction-sections -fdata-sections -fno-exceptions -std=gnu++0x -pthread -pipe -DNDEBUG -DTRIMMED -g -fprofile-generate -O3 -fomit-frame-pointer -fPIC -shared -Wl,-z,defs -Wl,--gc-sections -Wl,-h,libxul.so -o libxul.so nsStaticXULComponents.i_o nsUnicharUtils.i_o nsBidiUtils.i_o nsSpecialCasingData.i_o nsUnicodeProperties.i_o nsRDFResource.i_o -lpthread -Wl,-O1,--sort-common,--as-needed,-z,relro -Wl,-rpath,/usr/lib/firefox -Wl,-z,noexecstack -fprofile-generate -Wl,-rpath-link,/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/dist/bin -Wl,-rpath-link,/usr/lib ../../toolkit/xre/libxulapp_s.a ../../staticlib/components/libnecko.a ../../staticlib/components/libuconv.a ../../staticlib/components/libi18n.a ../../staticlib/components/libchardet.a ../../staticlib/components/libjar50.a ../../staticlib/components/libstartupcache.a ../../staticlib/components/libpref.a ../../staticlib/components/libhtmlpars.a ../../staticlib/components/libidentity.a ../../staticlib/components/libimglib2.a ../../staticlib/components/libgkgfx.a ../../staticlib/components/libgklayout.a ../../staticlib/components/libdocshell.a ../../staticlib/components/libembedcomponents.a ../../staticlib/components/libwebbrwsr.a ../../staticlib/components/libnsappshell.a ../../staticlib/components/libtxmgr.a ../../staticlib/components/libcommandlines.a ../../staticlib/components/libtoolkitcomps.a ../../staticlib/components/libpipboot.a ../../staticlib/components/libpipnss.a ../../staticlib/components/libappcomps.a ../../staticlib/components/libjsreflect.a ../../staticlib/components/libcomposer.a ../../staticlib/components/libtelemetry.a ../../staticlib/components/libjsinspector.a ../../staticlib/components/libjsdebugger.a ../../staticlib/components/libstoragecomps.a ../../staticlib/components/librdf.a ../../staticlib/components/libwindowds.a ../../staticlib/components/libjsctypes.a ../../staticlib/components/libjsperf.a ../../staticlib/components/libgkplugin.a ../../staticlib/components/libunixproxy.a ../../staticlib/components/libjsd.a ../../staticlib/components/libautoconfig.a ../../staticlib/components/libauth.a ../../staticlib/components/libcookie.a ../../staticlib/components/libpermissions.a ../../staticlib/components/libuniversalchardet.a ../../staticlib/components/libfileview.a ../../staticlib/components/libplaces.a ../../staticlib/components/libtkautocomplete.a ../../staticlib/components/libsatchel.a ../../staticlib/components/libpippki.a ../../staticlib/components/libwidget_gtk2.a ../../staticlib/components/libimgicon.a ../../staticlib/components/libprofiler.a ../../staticlib/components/libaccessibility.a ../../staticlib/components/libremoteservice.a ../../staticlib/components/libspellchecker.a ../../staticlib/components/libzipwriter.a ../../staticlib/components/libservices-crypto.a ../../staticlib/libjsipc_s.a ../../staticlib/libdomipc_s.a ../../staticlib/libdomplugins_s.a ../../staticlib/libmozipc_s.a ../../staticlib/libmozipdlgen_s.a ../../staticlib/libipcshell_s.a ../../staticlib/libgfxipc_s.a ../../staticlib/libhal_s.a ../../staticlib/libdombindings_s.a ../../staticlib/libxpcom_core.a ../../staticlib/libucvutil_s.a ../../staticlib/libchromium_s.a ../../staticlib/libsnappy_s.a ../../staticlib/libgtkxtbin.a ../../staticlib/libthebes.a ../../staticlib/libgl.a ../../staticlib/libycbcr.a -L../../dist/bin -L../../dist/lib /tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/dist/lib/libjs_static.a -lffi -Wl,-rpath-link,/usr/lib -L/usr/lib -lssl3 -lsmime3 -lnss3 -lnssutil3 -lcrmf -lXrender -lfreetype -lfontconfig -lsqlite3 -ljpeg -lpng -lz -lhunspell-1.3 -L/usr/lib -levent -lpixman-1 ../../dist/lib/libgkmedias.a -lasound -lrt -L../../dist/bin -L../../dist/lib -L/usr/lib -lplds4 -lplc4 -lnspr4 -lpthread -ldl ../../dist/lib/libmozalloc.a -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 -lX11 -lXext -lpangoft2-1.0 -lfreetype -lfontconfig -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lglib-2.0 -lgtk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lfreetype -lfontconfig -lgdk-x11-2.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpango-1.0 -lcairo -lgobject-2.0 -lglib-2.0 -lXt -lgthread-2.0 -lfreetype -lstartup-notification-1 -lvpx -ldl -lrt -lrt
collect2: error: ld terminated with signal 9 [Matat]
make[6]: *** [libxul.so] Error 1
make[6]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/toolkit/library'
make[5]: *** [libs_tier_platform] Error 2
make[5]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu'
make[4]: *** [tier_platform] Error 2
make[4]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu'
make[3]: *** [default] Error 2
make[3]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu'
make[2]: *** [realbuild] Error 2
make[2]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release'
make[1]: *** [profiledbuild] Error 2
make[1]: Leaving directory `/tmp/yaourt-tmp-enric/abs-firefox/src/mozilla-release'
make: *** [build] Error 2
dmesg output on ld :
[ 1521.353469] ld invoked oom-killer: gfp_mask=0x280da, order=0, oom_adj=0, oom_score_adj=0
[ 1521.353474] Pid: 6763, comm: ld Not tainted 3.6.0 #1
[ 1521.353475] Call Trace:
[ 1521.353482] [<ffffffff814cc68e>] ? dump_header.isra.11+0x5d/0x18e
[ 1521.353486] [<ffffffff812ae3dc>] ? ___ratelimit+0xac/0x120
[ 1521.353489] [<ffffffff810e2fb5>] ? oom_kill_process+0x275/0x3b0
[ 1521.353492] [<ffffffff810e2b10>] ? find_lock_task_mm+0x20/0x70
[ 1521.353494] [<ffffffff810e3455>] ? out_of_memory+0x1c5/0x290
[ 1521.353497] [<ffffffff810e742a>] ? __alloc_pages_nodemask+0x85a/0x870
[ 1521.353500] [<ffffffff811048c4>] ? handle_pte_fault+0x8c4/0xb10
[ 1521.353505] [<ffffffff81075ddf>] ? select_task_rq_fair+0x4cf/0x790
[ 1521.353509] [<ffffffff8100a21f>] ? native_sched_clock+0xf/0x70
[ 1521.353512] [<ffffffff8102b880>] ? do_page_fault+0x130/0x460
[ 1521.353515] [<ffffffff810e6301>] ? get_page_from_freelist+0x311/0x670
[ 1521.353519] [<ffffffff814d2275>] ? page_fault+0x25/0x30
[ 1521.353523] [<ffffffff810df577>] ? file_read_actor+0x67/0x1f0
[ 1521.353526] [<ffffffff810f6915>] ? shmem_file_aio_read+0x155/0x3a0
[ 1521.353530] [<ffffffff81128832>] ? do_sync_read+0x92/0xd0
[ 1521.353532] [<ffffffff811290c0>] ? vfs_read+0xa0/0x160
[ 1521.353535] [<ffffffff811291c7>] ? sys_read+0x47/0xa0
[ 1521.353537] [<ffffffff814d2275>] ? page_fault+0x25/0x30
[ 1521.353540] [<ffffffff814d27fd>] ? system_call_fastpath+0x1a/0x1f
[ 1521.353541] Mem-Info:
[ 1521.353543] DMA per-cpu:
[ 1521.353544] CPU 0: hi: 0, btch: 1 usd: 0
[ 1521.353545] CPU 1: hi: 0, btch: 1 usd: 0
[ 1521.353546] CPU 2: hi: 0, btch: 1 usd: 0
[ 1521.353547] CPU 3: hi: 0, btch: 1 usd: 0
[ 1521.353548] DMA32 per-cpu:
[ 1521.353550] CPU 0: hi: 186, btch: 31 usd: 0
[ 1521.353551] CPU 1: hi: 186, btch: 31 usd: 26
[ 1521.353552] CPU 2: hi: 186, btch: 31 usd: 59
[ 1521.353553] CPU 3: hi: 186, btch: 31 usd: 0
[ 1521.353554] Normal per-cpu:
[ 1521.353555] CPU 0: hi: 186, btch: 31 usd: 30
[ 1521.353556] CPU 1: hi: 186, btch: 31 usd: 156
[ 1521.353557] CPU 2: hi: 186, btch: 31 usd: 169
[ 1521.353558] CPU 3: hi: 186, btch: 31 usd: 0
[ 1521.353562] active_anon:1599337 inactive_anon:345122 isolated_anon:0
active_file:140 inactive_file:222 isolated_file:0
unevictable:17 dirty:0 writeback:0 unstable:0
free:11562 slab_reclaimable:14927 slab_unreclaimable:21150
mapped:6681 shmem:932329 pagetables:10868 bounce:0
[ 1521.353567] DMA free:15892kB min:20kB low:24kB high:28kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
[ 1521.353568] lowmem_reserve[]: 0 3147 7925 7925
[ 1521.353575] DMA32 free:23592kB min:4520kB low:5648kB high:6780kB active_anon:2754024kB inactive_anon:412764kB active_file:16kB inactive_file:44kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3223060kB mlocked:0kB dirty:0kB writeback:0kB mapped:5892kB shmem:1294220kB slab_reclaimable:7144kB slab_unreclaimable:5108kB kernel_stack:216kB pagetables:8616kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:715 all_unreclaimable? yes
[ 1521.353576] lowmem_reserve[]: 0 0 4778 4778
[ 1521.353582] Normal free:6764kB min:6860kB low:8572kB high:10288kB active_anon:3643324kB inactive_anon:967724kB active_file:544kB inactive_file:844kB unevictable:68kB isolated(anon):0kB isolated(file):0kB present:4892832kB mlocked:68kB dirty:0kB writeback:0kB mapped:20832kB shmem:2435096kB slab_reclaimable:52564kB slab_unreclaimable:79484kB kernel_stack:2968kB pagetables:34856kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:2484 all_unreclaimable? yes
[ 1521.353583] lowmem_reserve[]: 0 0 0 0
[ 1521.353586] DMA: 1*4kB 0*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15892kB
[ 1521.353592] DMA32: 740*4kB 506*8kB 300*16kB 135*32kB 25*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 1*4096kB = 23872kB
[ 1521.353599] Normal: 637*4kB 0*8kB 0*16kB 2*32kB 1*64kB 0*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 6516kB
[ 1521.353605] 932908 total pagecache pages
[ 1521.353606] 0 pages in swap cache
[ 1521.353607] Swap cache stats: add 0, delete 0, find 0/0
[ 1521.353608] Free swap = 0kB
[ 1521.353609] Total swap = 0kB
[ 1521.369740] 2094576 pages RAM
[ 1521.369743] 80362 pages reserved
[ 1521.369744] 36619 pages shared
[ 1521.369745] 1993098 pages non-shared
[ 1521.369746] [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name
[ 1521.369752] [ 2286] 0 2286 6258 269 16 0 -1000 systemd-udevd
[ 1521.369754] [ 2293] 0 2293 153174 83 229 0 0 systemd-journal
[ 1521.369757] [ 3585] 0 3585 4695 188 13 0 0 mount.ntfs-3g
[ 1521.369759] [ 3615] 0 3615 3547 140 12 0 0 crond
[ 1521.369761] [ 3616] 0 3616 6708 2523 18 0 0 preload
[ 1521.369763] [ 3617] 0 3617 17762 297 38 0 0 cupsd
[ 1521.369765] [ 3619] 0 3619 43562 313 52 0 0 NetworkManager
[ 1521.369767] [ 3620] 84 3620 6988 70 20 0 0 avahi-daemon
[ 1521.369769] [ 3621] 0 3621 6515 72 18 0 0 systemd-logind
[ 1521.369770] [ 3622] 81 3622 4595 285 14 0 -900 dbus-daemon
[ 1521.369772] [ 3626] 0 3626 2275 32 9 0 0 agetty
[ 1521.369774] [ 3627] 0 3627 6693 53 19 0 0 kdm
[ 1521.369776] [ 3628] 84 3628 6957 52 18 0 0 avahi-daemon
[ 1521.369778] [ 3631] 0 3631 45316 12716 91 0 0 X
[ 1521.369780] [ 4287] 0 4287 15666 128 36 0 0 kdm
[ 1521.369782] [ 5131] 102 5131 92417 912 41 0 0 polkitd
[ 1521.369784] [ 5132] 0 5132 53222 346 41 0 0 colord
[ 1521.369786] [ 5163] 0 5163 129753 991 153 0 0 colord-sane
[ 1521.369788] [11395] 0 11395 523912 258 62 0 0 console-kit-dae
[ 1521.369790] [11468] 1000 11468 3668 111 13 0 0 startkde
[ 1521.369792] [11480] 1000 11480 3970 37 13 0 0 dbus-launch
[ 1521.369794] [11481] 1000 11481 4839 401 15 0 0 dbus-daemon
[ 1521.369796] [11507] 1000 11507 4068 94 12 0 0 gpg-agent
[ 1521.369798] [11510] 1000 11510 3760 87 11 0 0 ssh-agent
[ 1521.369799] [11524] 1000 11524 1013 21 7 0 -300 start_kdeinit
[ 1521.369801] [11525] 1000 11525 85821 1591 149 0 -300 kdeinit4
[ 1521.369803] [11528] 1000 11528 188590 3072 227 0 0 kded4
[ 1521.369805] [11534] 1000 11534 108217 2084 173 0 0 kwalletd
[ 1521.369807] [11539] 1000 11539 107913 2348 173 0 0 kglobalaccel
[ 1521.369809] [11542] 0 11542 55597 601 43 0 0 upowerd
[ 1521.369811] [11555] 1000 11555 1047 18 7 0 0 kwrapper4
[ 1521.369813] [11556] 1000 11556 127307 2185 174 0 0 ksmserver
[ 1521.369814] [11568] 0 11568 49409 269 33 0 0 udisks-daemon
[ 1521.369816] [11573] 0 11573 12394 89 28 0 0 udisks-daemon
[ 1521.369818] [11577] 1000 11577 214097 12177 260 0 0 kwin
[ 1521.369820] [11590] 1000 11590 93530 1489 131 0 0 kactivitymanage
[ 1521.369822] [11621] 1000 11621 343123 3417 215 0 0 knotify4
[ 1521.369824] [11631] 1000 11631 175587 4370 239 0 0 krunner
[ 1521.369826] [11633] 1000 11633 246522 16714 342 0 0 plasma-desktop
[ 1521.369828] [11636] 1000 11636 216148 5325 253 0 0 lancelot
[ 1521.369830] [11639] 1000 11639 50634 268 35 0 0 mission-control
[ 1521.369831] [11643] 1000 11643 37597 405 39 0 0 akonadi_control
[ 1521.369833] [11645] 1000 11645 357276 722 81 0 0 akonadiserver
[ 1521.369835] [11652] 1000 11652 377776 6206 70 0 0 mysqld
[ 1521.369837] [11738] 1000 11738 76786 1061 110 0 0 akonadi_agent_l
[ 1521.369839] [11739] 1000 11739 76783 1056 111 0 0 akonadi_agent_l
[ 1521.369841] [11740] 1000 11740 75143 1033 111 0 0 akonadi_agent_l
[ 1521.369843] [11741] 1000 11741 75144 1042 110 0 0 akonadi_agent_l
[ 1521.369845] [11742] 1000 11742 75800 1048 112 0 0 akonadi_agent_l
[ 1521.369847] [11743] 1000 11743 75800 1054 107 0 0 akonadi_agent_l
[ 1521.369848] [11744] 1000 11744 76786 1064 108 0 0 akonadi_agent_l
[ 1521.369850] [11745] 1000 11745 76780 1073 111 0 0 akonadi_agent_l
[ 1521.369852] [11746] 1000 11746 84215 1305 155 0 0 akonadi_maildis
[ 1521.369854] [11747] 1000 11747 92098 1211 138 0 0 akonadi_nepomuk
[ 1521.369856] [11774] 1000 11774 59745 591 76 0 0 nepomukserver
[ 1521.369858] [11777] 1000 11777 287924 2235 149 0 0 nepomukservices
[ 1521.369860] [11795] 1000 11795 100823 10181 51 0 0 virtuoso-t
[ 1521.369861] [11801] 1000 11801 93041 786 99 0 0 pulseaudio
[ 1521.369863] [11802] 133 11802 41125 46 17 0 0 rtkit-daemon
[ 1521.369865] [11811] 1000 11811 17253 140 36 0 0 gconf-helper
[ 1521.369867] [11813] 1000 11813 11527 127 26 0 0 gconfd-2
[ 1521.369869] [11816] 1000 11816 68886 1148 123 0 0 kuiserver
[ 1521.369871] [11837] 1000 11837 58146 1047 105 0 0 nepomukservices
[ 1521.369873] [11839] 1000 11839 53655 966 98 0 0 nepomukservices
[ 1521.369875] [11840] 1000 11840 92263 1128 107 0 0 nepomukservices
[ 1521.369877] [11841] 1000 11841 109750 1232 107 0 0 nepomukservices
[ 1521.369878] [12942] 1000 12942 41975 542 78 0 0 kwrited
[ 1521.369880] [12944] 1000 12944 246808 6774 195 0 0 ktorrent
[ 1521.369882] [12954] 1000 12954 93430 1212 139 0 0 polkit-kde-auth
[ 1521.369884] [12957] 1000 12957 70673 1126 130 0 0 nepomukcontroll
[ 1521.369886] [12959] 1000 12959 92309 1654 138 0 0 kgpg
[ 1521.369888] [12966] 1000 12966 109879 2164 176 0 0 klipper
[ 1521.369890] [13009] 1000 13009 86477 1682 131 0 0 kio_http_cache_
[ 1521.369892] [17302] 1000 17302 270535 59165 488 0 0 firefox
[ 1521.369894] [17322] 1000 17322 10407 86 26 0 0 gvfsd
[ 1521.369896] [17324] 1000 17324 50365 171 31 0 0 gvfs-fuse-daemo
[ 1521.369897] [18462] 1000 18462 138761 5014 199 0 0 konsole
[ 1521.369899] [18464] 1000 18464 4227 156 13 0 0 bash
[ 1521.369901] [19535] 1000 19535 3885 324 13 0 0 yaourt
[ 1521.369903] [19680] 1000 19680 3800 253 13 0 0 makepkg
[ 1521.369905] [22861] 1000 22861 174765 6917 209 0 0 dolphin
[ 1521.369907] [24940] 1000 24940 12258 2121 27 0 0 Xvfb
[ 1521.369909] [24941] 1000 24941 2944 134 11 0 0 make
[ 1521.369911] [25116] 1000 25116 2946 137 11 0 0 make
[ 1521.369913] [25337] 1000 25337 3013 200 11 0 0 make
[ 1521.369915] [ 473] 1000 473 2977 169 12 0 0 make
[ 1521.369917] [ 3719] 1000 3719 3006 176 12 0 0 make
[ 1521.369919] [10784] 1000 10784 3006 175 13 0 0 make
[ 1521.369921] [12252] 1000 12252 115351 9567 175 0 0 kvirc
[ 1521.369922] [26014] 1000 26014 4256 168 13 0 0 bash
[ 1521.369925] [30177] 1000 30177 4255 167 14 0 0 bash
[ 1521.369926] [30976] 1000 30976 86977 3634 138 0 0 plugin-containe
[ 1521.369928] [ 915] 1000 915 87003 1648 132 0 0 kio_file
[ 1521.369930] [ 916] 1000 916 109277 2635 176 0 0 kio_thumbnail
[ 1521.369932] [ 1186] 1000 1186 4227 157 13 0 0 bash
[ 1521.369934] [ 2105] 1000 2105 86873 1689 132 0 0 klauncher
[ 1521.369936] [ 2473] 1000 2473 87003 1648 132 0 0 kio_file
[ 1521.369938] [ 3468] 1000 3468 141313 5962 206 0 0 kate
[ 1521.369940] [ 6331] 1000 6331 109512 2225 174 0 0 kate
[ 1521.369942] [ 6733] 1000 6733 2983 150 12 0 0 make
[ 1521.369943] [ 6760] 1000 6760 17243 1559 39 0 0 python
[ 1521.369945] [ 6761] 1000 6761 1882 30 9 0 0 c++
[ 1521.369947] [ 6762] 1000 6762 1816 23 9 0 0 collect2
[ 1521.369949] [ 6763] 1000 6763 812215 809141 1588 0 0 ld
[color=#FF40BF][ 1521.369951] Out of memory: Kill process 6763 (ld) score 402 or sacrifice child
[ 1521.369953] Killed process 6763 (ld) total-vm:3248860kB, anon-rss:3236396kB, file-rss:168kB[/color]
gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.7.2/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --disable-ppl-version-check --disable-cloog-version-check --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-multilib --disable-libssp --disable-build-with-cxx --disable-build-poststage1-with-cxx --enable-checking=release
Thread model: posix
gcc version 4.7.2 (GCC)
cat /proc/meminfo
MemTotal: 8056856 kB
MemFree: 1240336 kB
Buffers: 278356 kB
Cached: 4591784 kB
SwapCached: 0 kB
Active: 2700172 kB
Inactive: 3860720 kB
Active(anon): 2498432 kB
Inactive(anon): 2441488 kB
Active(file): 201740 kB
Inactive(file): 1419232 kB
Unevictable: 68 kB
Mlocked: 68 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 124 kB
Writeback: 0 kB
AnonPages: 1690996 kB
Mapped: 218032 kB
Shmem: 3249176 kB
Slab: 172972 kB
SReclaimable: 90332 kB
SUnreclaim: 82640 kB
KernelStack: 3264 kB
PageTables: 38384 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 4028428 kB
Committed_AS: 6713700 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 92972 kB
VmallocChunk: 34359642076 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 10240 kB
DirectMap2M: 7237632 kB
/etc/makepkg.conf
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
MAKEFLAGS="-j5"
thanks a lot
Last edited by papu (2012-10-13 17:35:38)

yes it's true it take 4gigs of 8 gigs i have, but when i was using gentoo never had this problem when i was compiling any package and then my pc was 4gigs.
df -hT
Filesystem Type Size Used Avail Use% Mounted on
rootfs rootfs 51G 7.7G 41G 17% /
dev devtmpfs 3.9G 0 3.9G 0% /dev
run tmpfs 3.9G 1.6M 3.9G 1% /run
/dev/sdb2 ext4 51G 7.7G 41G 17% /
tmpfs tmpfs 3.9G 76K 3.9G 1% /dev/shm
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 56K 3.9G 1% /tmp
/dev/sdc1 fuseblk 299G 237G 62G 80% /mnt/share
/dev/sdb1 ext2 183M 28M 146M 16% /boot
/dev/sdb3 ext4 18G 6.2G 11G 37% /home
i am using vanilla kernel 3.6.0
cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
# /dev/sdb2
UUID=412194cb-8953-4d02-94b4-d25d21bd7126 / ext4 rw,relatime,barrier=0 0 1
#/dev/sdb1
UUID=8bc28611-e3ee-4079-b311-33b9d4a0f36a /boot ext2 rw,relatime 0 2
#/dev/sdb3
UUID=2d6d63e0-a59f-439f-9c11-f6673055e65a /home ext4 rw,relatime,barrier=0 0 2
#/dev/sdc1
UUID=60F0F9D3F0F9AF80 /mnt/share ntfs-3g umask=0 0 0
what i have to do ?
thanks so much. friends!
Last edited by papu (2012-10-13 19:44:17)

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

Project Accounting Month end Closing Process

Dear Experts,
Any one can help me by explaining Project Accounting Month End Closing Process
Thanks & Regards
Bharath

Bharath
1. Clear all the transactions from Interface tables
2. Import them
3. Run all the Expenditures (PRC, Interface processes) make sure none of the expenditures are not accounted
4. Run Borrow and Lent process if any, Transfer to GL
5. Run Revenue Process, make sure revenue is generated, accounted
6. Review the revenue draft versions created, make sure all revenue draft versions are released
7. INterface revenue to GL, then later Tie back process
8. Run the Invoicing process
9. Make sure to Approve, release all the Invoices in draft version
10. Interface to AR ( ensure that none of the records are in error)
11. Auto Invoice Import in AR
12. Tieback process in PA
13. run Exc: Transaction Exception details by GL Period/ PA period , Exc: Transaction Exception summary by GL Period/ PA Period
14. Make sure the report output on step 13 are blank, if yes try to clear all the transactions and re run the reports
15. Now try closing the period
Thanks
Krishna

Executing ABAP Report- No memory for processing HTTP, HTTPS or SMTP query

Hello experts,
I am getting same error while running ABAP Report- /OSP/TRIGGER_LEAVE_SCHEDULER
Error-
No memory for processing HTTP, HTTPS or SMTP query .
Please help.
Regards,
Shashank

Hello
This should solve it
1562539 - No memory for processing HTTP, HTTPS, or SMTP queries.
Thanks
Alagappan

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

/etc/profile: line 28: ulimit: max locked memory: cannot modify limit: Oper

Hi;
I writed one sh which is checking tablespace size and its working well ( i used this before for someother client) Now i try to run it on one server and i have this error:
/etc/profile: line 28: ulimit: max locked memory: cannot modify limit: Operation not permitted in /var/spool/mail/root
Anyone has idea what is problem?
Thanks

Well, check line 28 of /etc/profile, and see what command it is trying to execute. If it's a ulimit -l command, check if the value it is trying to set the limit to is higher than the current ulimit value of the current user. If it is, then that operation is not allowed. You can increase the limit for the current user (at login time) by modifying /etc/security/limits.conf . This is documented in the various guides, notes, whitepapers that talk about installing Oracle database on Linux.

Does more iPhone memory speed processing?

Does buying an iPhone with more memory speed processing?

No, not really.
'Memory' or 'RAM' would allow more temporary storage for processing which could improve processing, however I think you are confusing memory with 'storage'.
Apple only offer the same memory capacity for each model but offer different 'storage' sizes.
More storage simply allows you to store more apps, music, photos etc on the device. You can't buy an iPhone or iPad with more memory, only the storage sizes differ.

Prctl -n project.max-shm-memory -i process $$

Similar Messages

Maybe you are looking for