Precalculation server how to get the initial "ready" status

Hi guys,
i have scheduled 50 workbooks over night in 5 minute distances. The precalculation server is one physical server with 3 registered precalc server. Multiinstance precalculation is started. And when i come in the morning i see in RSRD_Log
with red icon the message "The system searches for the next free preliminary calculation server" and also "No free precalculation servers found (' 100" and the last message "An active RFC server could not be found ". Before i went i restarted the server so the precalculation registrations should all be green and ready and in an initial state.
From 0 o clock till 7 o clock they are all red the registrations and from 8 o clock they are green again and work fine. How come?
Does a reboot not put them into initial state? Do i also have to clear the queue from RSPRECADMIN? From 50 scheduled workbooks just 10 reach their target via mail. What am i doing wrong?
Thanks and kind regards,
Murat

Hi Vikram,
there are no paralel processes defined they are all scheduled sequentially. They are 70 scheduled in 5 minute distances.
But no parallel processes. What could be the reason?
Thanks and kind regards,
Murat

Similar Messages

How to get the initial (first) transaction

Hi, everybody.
I need to get the initial (or first) transaction, from which the current was called. Does anybody know how?
Example: Tr. FEBAN after some operations calls FB05, then in OPENFI-logic SY-TCODE = 'FB05'. How can I get 'FEBAN'.
Maybe there are some system functions?
Thanks.

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

How to get the initial state of JSF PAGE IN ORACLE ADF

Hi everybody
my Jdeveloper version is 12.1.3
I'm building my JSF pages based on a template that has a navigation pane which contains command navigation items , every one of them (command navigation items) appears as a link at runtime and calls a JSF page , I wish to get the initial state for any page when leaving it then entering such page again , and I would like to know what is the suitable place to write the code to do this task.
many thanks !

Clear the cache by adding the following to each jsf page.
<%
response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
%>

How to get the set pf-status and call Transaction work together in SA

hi,
I am using Set pf-status to display the details screen and the same time using call transaction va03 leave screen 0 to display the corresponing sales order.
The issue is both of them are not workin together properly.
it could be helpfull if you give some code which deals the issue in detail...
can you please give details how to get the previous screen once the new screen is obtained thru set pf-status
thanks and regards
Edited by: san dep on Jul 10, 2008 6:25 PM

Hi,
Try this code ---
SET PF-STATUS 'STATUS_NAME' OF PROGRAM 'ZPROGRAM_NAME'.
Regards
Pinaki

How to get the initial name.

public class asd{
public static void main(String[] args){
asd dkd =new asd();
how to show the object's name(dkd)?

Are you trying to obtain the reference variable name is?
Here is an example:
String str = new String("God is real!"); // "str" would be the reference variable nameIf you call the toString() method you will won't get "str". You would get "God is real!". Look at my example below:
String str = new String("God is real!"); // "str" would be the reference variable name
System.out.println(str.toString());OUTPUT:
"God is real!"
If you do a to string on like this:
asd dkd = new asd();
System.out.println(dkd.toString()); The Output would look like this:
"asd@lfee6fc"
I'm not clear on what you mean by object name, but using the toString() method wouldn't be how I would get it. If you mean the Class name you could use the getClass().toString() methods to obtain the Class name. That would give you "java.lang.String" for the first example and the second ouputput would be "class asd".

Where/How to get the initial set of loops

GarageBand is displaying the initial loops greyed out, and when I click one a dialogue comes up saying they're not installed. I'm given the option to Download now, later, or from disk. Since iLife came installed on my mac I have no disc. So's I select download now, and it shuffles me over to Software Update... which informs me that there are no new updates and quits itself. Attempting to re-open the dialogue in GB gives me a message saying that the download/install is underway, but there is no evidence of such.
So's... is there any way I can manually download and install these loops? Or, at the very least, remove the greyed out one from the library?
I'm suspecting that I refused this update early on or something... I've had my mac for about a year and a half but no need to use GarageBand until now.

http://www.bulletsandbones.com/GB/GBFAQ.html#noloops
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to get the initial boot log [solved]

Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Thanks.
Last edited by aclemente (2012-12-12 22:17:50)

aclemente wrote:
Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Please search the wiki: almost everything you need has already been documented...

[6136] How-to get the initial IMPS client ?

Hi, I have a Nokia 6136 which supports IMPS but with presence capability only. The chat capability has been removed by the operator but apparently, according to its support, it is possible to get the original configuration from Nokia. Is there a way to get the full IMPS client (with chat and presence capabilities) OTA ? Thanks for your help. -- kael

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

How to get the initial amount of a posted document?

Hi guys!
Upon posting a document, the amount of a G/L Account is automatically calculated (55,000.00) . From vbsegs it will be transfered to bseg table. And the value has been changed, the amount is divided by a tax code(12% VAT) = 49,107.14. How will I get 55,000 back without manually computing it? In what table or is there a standard bapi?
Points for helpful ideas. Thanks!

Hi Maui,
If you go to table S001, you would see the details of the sales figures divided into "Gross and Net". You can also obtain some information from table VBAP.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to get the mouse's status ?

Hello,
Anybody knows call which API can reach to get mouse's status, not mouse position and click status I want , but its "Normal select" "Busy" "Working in background" etc status. thanks in advance.
and I have made one "GetCurrsor" sample attached, but, it is not well, why the count would change at labVIEW front panel only, if the cursor is out of labVIEW front panel, it is no response. is anything wrong ?
please help to point out.
Attachments:
Get_Cursor.vi ‏17 KB

Yup, and I am going to that forums too (LAVA), but I found Gilbert have told us his last concern Clearly.
Try to make everything Automatic

How to get the user active stauts in jspdynpro

How to get the user active status in jspdynpro.
I want check weather a user is active or not (Collaboration Launch Pad functionality)
in jspdynpage.
Thank's in advance,
Mr.Chowdary

Hi Eddy,
Here the scenario is to get the data of a field from the user defined table to pass the extracted values as a input to the XL reporter, which will be selected while generating the report.
It would be great if you provide any solution for this problem.
Thanks.

How to get the new dependency SCA's related to 7.4 version with out upgrading NWDI server

Hi
We are in process of upgrading the custom webdynpro and portal components to SAP Portal 7.4.
I saw in some discussions that, we don't need to upgrade NWDI , we need to install new JDK version(1.6) to map that jdk to the new track for migrating the custom component to new track.
But i have questions related to NWDI track dependency files.
When i create new track to support 7.4 components need to be available in the respective track.
we have central SLD and we create all the product and custom software components in that SLD(7.01) itself , To create the custom software component in SLD , i add required dependency files. once the software component is ready, when i create the track in nwdi system i will be able to fetch the custom software component in nwdi system by click on cms update.
But now i need following new new dependency software component versions in SLD related to 7.4 for creating new software component to those dependency's to support the new track in NWDI.
EP_BUILDT
SAP-JEE
SAP_BUILDT
SAP_JTECHS
But my SLD server version is : 7.01 version.
so do i need to upgrade the SLD server to 7.4 get the latest dependent SCA's or just need import new SLD content in SLD server to add new custom software component to create?
kindly advice how to get the new software components in SLD without upgrading the NWDI & SLD system to 7.4
Thanks

Jun,
Thanks for the reply.
But i am not able to find the following two SCA's related to 7.4 version. I am able to find the rest of the SCA's. I able to see only 7.02 version related to following dependency files.
SAP-JEE
SAP_JTECHS
SAP-EU (CA EU) ( having only 7.01, 7.02, 7.10, 7.11 and 7.20) related to Guided procedures.
Did they changed any naming conventions related to these software components? if so what are new software compnents names to use
Please clarify.
Thanks
Vijay

How to get the files in presentation server while uploading?

how to get the files in presentation server while uploading?
give me the function module name

Hi,
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME DEFAULT C_PRES. "Prsnt Srvr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      DEF_PATH         = P_FILE
      MASK             = ',..'
      MODE             = '0 '
      TITLE            = 'Choose File'
    IMPORTING
      FILENAME         = P_FILE
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.

How to get the absolute path of logicalhost server domain on Windows Sun

i am reading a file from Xsql Folder, that is located in the logicalhost Sun\AppServer\domains\domain1\applications\j2ee-apps.(IN Sun Application Server)
I am pretty sure that using the absolute path will solve this issue, so my first question is: How to get the absolute path of logicalhost server domain on Windows?
i tried with System.getProperty("com.sun.aas.instanceRoot").
but i am able to retrive Sun\AppServer\domains\domain1 upto this .i am unable to retrive Sun\AppServer\domains\domain1\applications\j2ee-apps.
please suggest me how u can get absolute path in sun application server

Take a look here

How to get the absolute path of logicalhost server domain on Windows?

My logicalhost server domain behaves strangely. I am reading a file from collaboration definiton, that is located in the logicalhost/is/domains/domain1/config folder. I thought, that this folder is used as an application root folder so I can read files like ./file from there. And it worked.
But then I've installed the domain as a Windows service, restarted the PC. When the domain1 gets started, I get exceptions saying that the file can't be found. Then I restart the domain (in domainmgr.bat) and it works again.
I am pretty sure that using the absolute path will solve this issue, so my first question is: How to get the absolute path of logicalhost server domain on Windows?
And my second question is: Why does this happen?

The default folder for a Windows Service is the system32 folder contrary to the instance root folder when starting it as a normal process.
That's the why, haven't tried the how, but you should be able to get the value by calling System.getProperty("com.sun.aas.instanceRoot").
Hope this helps
Paul

Precalculation server how to get the initial "ready" status

Similar Messages

Maybe you are looking for