Premeire CS5 Freezes on save when using Elgato HD videos

First off, I'm using Adobe Premiere Pro CS5 on a 2009 21" iMac running Mountain Lion (OS X 10.8.5) with a 3.06 ghz core 2 duo and 12 gigs of ram.
I keep having the program freeze whenever I save a video from my Elgato Game Capture HD. The save bar fills in, but it will sit and the program will not respond, doing the error sound when I click anything. I have to force quite each time, luckily it as far as every time I have done this, saved properly and nothing was lost, but this is seeming like a huge risk every time and not to mention even if it works, that its just aggravating having to force quite and start up every time I want to save.
Originally it would not even import, but I have tried converting the video through an app called miro video converter and this new problem began. I also found I could convert video straight from the Elgato Program, with the same end result. I also did some tests to trouble shoot if its premiere just freaking out on me (trust me ghost problems are pretty common for me) I tested on an iShowU Recording as well as one from my SD Elgato video Capture (which should as I understand have the same H264 compression) and a video I pulled off YouTube just to see how well that works, and they all save just fine.
Also another note, I tried deleting the video from the project and saving as one of the tests and the program still froze without the elgato video even being in the project any more. It seems like once I put an Elgato HD video in the program at all it wont save properly.
Any help at all will be greatly appreciated.

The elgato record at 59.97 (I think) I know its the one near 60 frames, and as far as I can tell their is no way to reduce that. In my test the iShowU video had an FPS of 12. I'm not sure if the way it handles lower to higher FPS would cause the problem, but I have had varied frame rates in the past, but the only one that I have that can go over 30 right now is the elgato HD

Similar Messages

Problem description: Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom-.

Problem description:
Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom….     Help is much appreciated!
EtreCheck version: 2.0.11 (98)
Report generated 3. november 2014 kl. 01.23.41 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:49:19
Disk Information: ℹ️
Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (260.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/sysctl.conf - Exists
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/IPVanish.app
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Applications/Private Eye.app
[loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
/Library/Application Support/HASP/kexts
[not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) Support
[not loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.digitalrebellion.EditmoteListener.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.mcafee.menulet.plist Support
[invalid?] com.mcafee.reporter.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.orbicule.WitnessUserAgent.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[failed] com.aladdin.hasplmd.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.ipvanish.helper.openvpn.plist Support
[loaded] com.ipvanish.helper.pppd.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.mvnordic.mvlicensehelper.offline.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.orbicule.witnessd.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.xrite.device.xrdd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Skype Program (/Applications/Skype.app)
GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
EarthDesk Core UNKNOWN (missing value)
Dropbox Program (/Applications/Dropbox.app)
AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 Support
F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
Safari Extensions: ℹ️
Facebook Cleaner
Better Facebook
SiteAdvisor
Incognito
Bing Highlights
YouTube5
AdBlock
YoutubeWide
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences Support
EarthDesk Support
Editmote Support
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Witness Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      13% taskgated
      12% WindowServer
      1% WitnessUserAgent
      1% sysmond
      1% Activity Monitor
Top Processes by Memory: ℹ️
327 MB com.apple.WebKit.WebContent
137 MB softwareupdated
94 MB Safari
82 MB VShieldScanner
82 MB Dock
Virtual Memory Information: ℹ️
65 MB Free RAM
1.58 GB Active RAM
1.54 GB Inactive RAM
647 MB Wired RAM
2.95 GB Page-ins
260 MB Page-outs

You have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.

When using Firefox certain videos play but the image is green and distorted.. help?

Firefox 3.6.8 and 3.5 (I downgraded to see if that would solve the issue)
Windows 7
Intel Core i5
Flash Player: WIN 10,1,53,64
When using Firefox certain videos play but the image is green and distorted. The image turns into lines and sometimes it half of the screen of the video. Examples are streaming MLB.tv video and some vimeo videos. The odd thing is that it isn’t all Vimeo videos. Is this a flash issue?
The issue does not happen with Internet Explorer which leads me to believe this is an issue with Firefox. I downgraded to 3.5 and the issue still persists.
Screen Caps: http://yfrog.com/1x46496103j and http://yfrog.com/n112309689j
Any help?
== URL of affected sites ==
http://

Try disabling hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash settings] (using Firefox, right-click on any Flash object on a webpage, select Settings, uncheck "Enable hardware acceleration on the Display tab).
Ref:
http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos

Can I use Elgato VHS Video Capture with my Macbook pro?

Can I use Elgato VHS Video Capture with my Macbook Pro? It comes with a CD on which is the software. My Macbook pro does not have a CD drive. how do i get the software?

Elgato provides a download link to their latest Video Capture software v1.1.5. Supposedly runs on Snow Leopard and later. They recommend Yosemite.

Playback not supported by http proxy when using Amazon instant video - what to do?

Message
playback not supported by http proxy when using Amazon instant video - what to do?

Settings > General > Reset > Reset Network Settings

Flash freezes (halts/hangs) when using SLC FastForward flash based product. Help!

I'm using Windows XP SP3 - Chrome Version 23.0.1271.97 m, Firefox 17.0.1. - i7 Q Core 3.4 Ghz, 4 Gb DDR 3, AMD Radeon HD 6452 (Video Card) : The screen seems to completely lock up with no response from the HID (Keyboard, Mouse). I have to restart the computer, sometimes it will let me restart the browser. I'll be using the product for several minutes and the computer locks up. It mainly occurs in Chrome and am wondering; since it's a peppered version of Flash that it's requiring more resources from the video card (512mb) it's locking the system up. Anyone have ideas why flash would be failing/freezing during the use of this product? The symptoms and behavior are similar to those that occur when using other flash based products such as YouTube. Any one have any ideas?

the next time it happens, post your logs. /var/log/Xorg.0.log would be one of things to look at. Check your CPU usage at that time. See what process or processes are taking most of the CPU cycles and/or memory and other resources.

Machine freezez/lock ups when using password protected certificates in IE 11 Windows 8.1 Pro

When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
Not sure if this
KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.

Hi Simon,
You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
Regards
Wade Liu
TechNet Community Support

Does the new Photoshop Elements 13 have the freeze mask tool when using liquify

Im wanting to know if the new photoshop elements 13 has the freeze mask .. thats used in liquify ? I know the older versions do not, and also aware that PS does have it… was hoping they included it in the new elements 13 ??

Yes.
Click on an icon that looks like this:
Now look for something like this in the tools options panel that looks like this:
If you don't get this panel open then click on tools option as shown in this picture:
Hope this helps.

Error Message when using iChat w/ Video

I am receiving an error anytime that I use iChat video. It only occurs in certain circumstances though. They are anytime I have been in a video conference with someone for about 20/30 minutes, I am told that audio still comes through but the camera feed freezes. Then when that happens, I close down the video screen/window and attempt to re-connect. When attempting to reconnect, it tells me that it is asking for the other party to join in, tells me that it is connecting then I get an error message popping up.
I'm going to go ahead and throw this in here. I am using a 2Wire Router, my internet provider is ATT U-verse (I know feel for me).
Now, in order to get video to run again, both parties have to reboot their computers. Otherwise we will both continue to get an error. What in the bloody heck is going on? SOMEONE PLEASE HELP!!!!
Here is the particular error message.
iChat Connection Log:
2008-07-25 16:37:49 -0500: AVChat started with ID 1359333755.
2008-07-25 16:37:49 -0500: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2008-07-25 16:37:49 -0500: 0x1013e6f0: State change from AVChatNoState to AVChatStateInvited.
2008-07-25 16:37:55 -0500: 0x1013e6f0: State change from AVChatStateInvited to AVChatStateConnecting.
2008-07-25 16:37:55 -0500: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-07-25 16:38:10 -0500: 0x1013e6f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-07-25 16:38:10 -0500: 0x1013e6f0: Error -8 (Did not receive a response from 0x1013e6f0.)
2008-07-25 16:38:10 -0500: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2008-07-25 16:38:10 -0500: [email protected]: Error -8 (Did not receive a response from 0x1013e6f0.)
Video Conference Error Report:
12.027970 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
3834.187259 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
3836.188887 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
10.027592 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK1fbb672f3f9c3757
Max-Forwards: 70
To: "u0" <sip:user@rip>
From: "0" <sip:user@lip:16402>;tag=1675795393
Call-ID: 0b4908fe-5a89-11dd-91ae-dc6cc6f84012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
Message was edited by: Shawnda

Is System Preferences > Quicktime > Streaming set to 1.5Mbps ?
Restart iChat if you have to change (the Automatic setting can cap iChat in Tiger and to a lesser extent Leopard)
In iChat > Preferences > Video Section set the Bandwidth Drop down to 500kbps
I say this as the symptom you describe may be your ISP trying to control Peer-to-Peer File sharing and as iChat is Peer-to-Peer in Video and Audio Only chats it seems it is subject to those ISPs playing with Bandwidth to control this.
It may pay to have the Connection Doctor (In the iChat > Video Menu) open to monitor if your Connection speed or your Buddies is the one that is dropping off.
You can change the Bandwidth setting in iChat during a chat and it does not need a restart.
Which 2Wire device ?
What can you tell us about how it is set up for iChat ?
Does it have and is it using UPnP ?
Does it have DoS or SPI protection as this may also get in the way ?
10:56 PM Saturday; July 26, 2008

Screen flicks when using miniDVI - S Video on WinXP

Hi -
I have installed WinXP using BootCamp. Now when I try to use miniDVI to S-Video the screen on Laptop flicks and the TV shows 'no signal'. I tested this on OSx10 and seems like this setting works and I can see the extended screen on my TV without the laptop screen getting flicked.
Can anyone help in finding the problem. Would appreciate the help.
Thanks,

Hello rmj49,
Welcome to the HP Forums!
I understand the computer display flickers when using the AMD driver. The issue is probably related to hardware, but there are a couple things I would like you to try fist:
First, please uninstall and reinstall the AMD Driver according to these steps:
1. Go into Device Manager, then Display Adapters.
2. Right-click on the AMD driver, and select uninstall.
3. Restart the computer. This will force a driver to be reinstalled.
If that doesn't help, my other suggestion is to update the computer to Windows 8.1. Using the AMD driver in a different OS might work.
If nothing works, I would contact HP phone support to address the actual AMD card itself. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP.

RAM preview doesn't save when using multiprocessing

I'm running After Effects CC on a MacPro 2013. When I normally render a RAM preview, and I finish playing it, the green bar stays.
When I switch to the multiprocessing feature for RAM previews, after I finish playing it, the green bar disappears.
I have a large SSD global cache drive being used, so storage of the preview isn't the problem. There's plenty of RAM in the system (64GB). I've tried a number of different multiprocessing settings, and even if I only use 2 processors for RAM previews, they won't save after I play them.
Is this just the way RAM previews work with multiprocessing, or can I change some settings to fix it.
Thanks!
Jerry MacKay
Littleflick Pictures

Here's a shot of my current settings. I tried a number of other settings, with different numbers of processors and allocated RAM. But every time I enable multiprocessors for RAM previews, I get the same result (the RAM preview works, until I stop playing it...then the rendered frames are deleted).

Internet Options, LAN Settings don't save when using Run As

Hi,
On Windows Server 2012 RTM with IE ESC off I can log on to the console of the server as UserA, I can open IE, open the Internet Options window, select the Connections tab, click LAN Settings, change a setting (eg specify a proxy server), click OK, and click
LAN Settings again to confirm my changes were saved.
However, if whilst logged on as UserA, I right-click the IE icon on the taskbar, select "Run as different user" and specify credentials for UserB instead, any changes I make in the LAN Settings window are forgotten the moment I click OK.
But, if I log on to the console of the server as UserB and open IE, the LAN Settings window does remember the changes I make, so this is not a user permissions or Group Policy issue.
Additionally, if I use Fiddler's "Tools, WinINET Options" menu to access the Internet Options window, I experience the same variations in behaviour I described above depending on whether Fiddler is run from the console user, or via "Run as different user".
Lastly, using Sysinternals's ProcMon, when the LAN Settings are saved correctly, I can see it is done via DllHost.exe (WinInetBroker) calling GetUrlCacheEntryInfoEx which in turn writes the "Internet Settings\Connections\DefaultConnectionSettings" value
to the registry. I can also see iexplore.exe writing the "Internet Settings\Connections\SavedLegacySettings" key. When attempting to change the LAN Settings when "Run as a different user", ProcMon still shows the successful write to the SavedLegacySettings
key but the other key is never written to, there isn't even an Access Denied.
A reference to "GetAppContainerRegistryLocation" in one of the ProcMon captured stack traces suggests this is behaviour new to Windows 8 as part of the "Metro"-style app isolation, however this is occuring in IE desktop mode and Fiddler (which is not a Metro
app).
I believe this is either a bug that needs to be fixed to allow changes to save correctly or return an error when attempting to save the changes if they will be ignored. At the very least, this behaviour needs to be documented.
Regards,
Jason

Hi Jason,
I have tested in my lab, and got same result with you. below is my test and results.
1. log on with user1>> click "IE" and select "Run as different user">> type user2's credential >>change proxy, click "OK". open "internet option" again, the change was not saved.
2. log on with user2, check proxy in IE, the change was not saved.
Then I tested on "Home Page", zone settings, , I found the changes can be saved.
I have done further test on other applications, such as notepad (enable/disable status base), calculator (View >> standard/scientific/programmer/statistics), the change can be save from "Run as different user".
since this is a behavior of IE, I suggest you submit a post in IE forum and IE experts may give you explanation on that.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Photoshop CS5 freezes during save (Mac Os 10.9)

Dear users of Photoshop, I have a serious problem.
Every time I try to save a blank Photoshop file also does not respond and I have to force quit.
Work on a MacBookPro with 8 MB of Ram.
The system is compatible.
Until recently it worked.
I tried to repair permissions.
I tried deleting everything even with the use of Adobe Cleaner and reinstall.
I tried to launch the appicazione Adobe to fix the licenses.
Please help me.
From Activity Monitor I see that the application is not responding.
I'm desperate ... What can I do?
Thank you and by.
Sara

Update: The uninstaller clearly does not uninstall everything. Something is left on or in the flies is corrupt. I have trashed everthing I could find after an unistall and even things that Apple support helped me find. Still crashes after uninstall and fresh reinstall.
Good News: I found a work around for now. I logged into another user account on the same computer. Contribute CS5 opened, I enter the Key and information, and I have access again. At least I have one way in. The trouble is most of the content I want to add is in the other main user account, so I have to put all files/photos into a shared folder so I can get access.
Any other ideas?
Thanks

Illustrator CS3 Windows - Freezes/Crashes/locks when using open dialog.

I have looked all over the internet for a solution like this and tried all sorts of possible combinations and none worked.
So I set about tracking it down one afternoon. It only took me 4 hours to find the issue.
I think it's when the Version Cue preferences gets corrupted.
SOLUTION:
Close Illustrator. If it's crashed used task manager to stop the application.
Navigate to: C:\Documents and Settings\username\Application Data\Adobe\ and remove the workflow directory completely.
Restart Illustrator and the workflow directory will be recreated and now you can open your files with a dialogue as you would normally expect to.
Good Luck

The video card is opening the Save dialog offscreen, outside the visible desktop area.
Select Alt+ Spacebar, choose move and then use the arrow keys to move the dialog box back on screen and resize it so it fits and opens in the correct position.

Photoshop Elements 5 freezes and restarts when using Vista

I have a minor problem with Photoshop Elements 5. When I first start the program and click on 'File' the system freezes. If I wait about 30 or 40 seconds it all recovers and then when working again all is fine. It's really just very annoying when you first start the program and if someone else has had this problem and knows a fix, I would be very grateful.
Already tried: -
Uninstalling and re-installing
Repairing the installation
De-selecting Adobe Active File Monitor V5
None of these worked. The problem seems to be related to running Vista, everything worked fine on my old XP machine.
I am now using an Acer Aspire 5536 with Windows Vista installed as the operating system.

I haven't downloaded the patch, so I will give it a try and let you know if it worked. Many Thanks
Just to update you, I downloaded the patch and opened and closed Photoshop 3 or 4 times with no problem. So fingers crossed it looks like this did the trick. many thanks for your prompt reply.
The patch is available here for anyone else that needs it http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=3569&fileID=3369

Premeire CS5 Freezes on save when using Elgato HD videos

Similar Messages

Maybe you are looking for