Premiere sends EDL with 'invalid timecode format string'

Following the suggestions in this thread, I am attempting to send an EDL of a Premiere sequence to Speedgrade.
When I attempt to import the EDL into Speedgrade I get this error message:
ERROR
In point timecode is invalid. Invalid timecode format string(hours): '23813+20'
in edit 1
File: 001 LR001 V C 2813+20 23815+17 0:00 1+37
Line: 2
I've worked very rarely with EDLs but have read the Speedgrade and Premiere guides. I must be missing something but can't tell what.  Here's the details from my project:
I'm editing in 24fps. The video files are generated in After Effects from DPX files. The timecode is based on the DPX file names, with the hour matching the Lab Roll number (so 11:00:00 for Roll 11)
I export an EDL in CMX3600 format. I've tried both default settings and without audio. Same results. I even get the same result if I make a sequence from a single clip and try exporting that EDL.
I don't think this is a Speedgrade issue, because if I try re-importing the EDL into Premiere, it seems like all the clips are only one frame long.
Any suggestions about what I might be doing incorrectly would be greatly appreciated.
Thanks,
Lev         

Are you wanting to just simply go from Premiere to Speedgrade? If so why not just use the "send to speedgrade" choice. Also I wanted to point out in the original thread you actually said you didn't want to use speedgrade, I've never used a EDL with speedgrade so I have 0 ideas there, but have you tried just using Premiere's built in send to speedgrade function?

Similar Messages

  • Oracleasm lib failed to load with "Invalid module format" error

    Hi,
    I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
    I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
    We're using Redhat 5 U 2
    [root@PG673 modules]# uname -rm
    2.6.18-92.el5 x86_64
    [root@PG673 modules]#
    The package I downloaded is an exact match with our kernel version
    [root@PG673 modules]# rpm -qa | grep asm
    oracleasm-2.6.18-92.el5-2.0.5-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasm-2.6.18-92.el5-2.0.5-1.el5
    oracleasmlib-2.0.4-1.el5
    oracleasmlib-2.0.4-1.el5
    [root@PG673 modules]#
    RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
    [root@PG673 other]# /etc/init.d/oracleasm configure
    /etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
    Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
    [root@PG673 modules]# modprobe -l | grep asm
    /lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
    [root@PG673 modules]# modprobe oracleasm
    FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
    [root@PG673 modules]#
    As I know this error could happen if the driver version is not match with the system kernel version.
    The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
    Really appreciate if someone could point me a direction.
    Thanks
    Mike

    Hi Mike,
    something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
    $ rpm -qa | grep asm
    oracleasm-2.6.18-164.el5-2.0.5-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
    http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
    http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
    http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
    Uninstall all asm packages and retry with just those three.
    Good luck!
    Cheers,
    David
    OCP 9i / 10g
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • Send email with attachment html format.

    Hello experts,
    I have 1 screen with 4 tables , 3  is table control , and 1 is container .
    I want sent e-mail which include this screen in html format.
    How can i do this?
    Thanks for the help.
    Avi.
    Edited by: avi azulay on Oct 13, 2010 10:38 PM

    Hello ,
    It is not help me, i want to know how convert screen with 3 table control and 1 container to html format?
    Thanks for the help,
    Avi.

  • Data services with SQL Server 2008 and Invalid time format variable

    Hi all
    Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
    I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
    $Load_Date = to_char(sysdate(),'YYYY.MM.DD');
    When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
    error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
    However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
    Could you please help me to fix this problem?
    Thanks for your help in advance.

    Thanks for your reply.
    The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
    I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
    When I deleted the column in the query object and added it again, my problem solved.

  • SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

    We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
    SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
    Error: 2014-01-28 15:52:05.19
       Code: 0x80004005
       Source: xxxxxxxx SSIS.Pipeline
       Description: Unspecified error
    End Error
    Error: 2014-01-28 15:52:05.19
       Code: 0xC0202009
       Source: Process xxxxxx Load TableName [48]
       Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Invalid date format".
    End Error
    Error: 2014-01-28 15:52:05.19
       Code: 0xC020901C
       Source: Process xxxxxxxx Load TableName [48]
       Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
    the specified type.".
    End Error
    But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
    This looks like bug to me, Any suggestion?

    Hi Mohideen,
    Based on my research, the issue might be related to one of the following factors:
    Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
    A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
    Hope this helps.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Sending mail with excel attachment-improper format

    Dear experts,
    I am sending a mail to outlook with an excel attachment. The mail is sent with attachment and the data, but all in one cell.
    I am using SO_NEW_DOCUMENT_ATT_SEND_API1. What parameters do i need to manipulate to have data in different columns of excel? I am using "packing_list" table of FM. But dont know the exact parameters to be passed. Can anyone help with the same please?
    Best regards and thanks!
    Sumit Nene.

    Hello Sumit,
    I am using same function module to send mail with excel attachment.
    Below I am attaching my own code for your reference.
    Data which u want to add in excel file is maintain in IT_OBJBIN i.e. document information.
    CLEAR :IMESSAGE,IT_OBJBIN,IT_OBJPACK,IT_RECLIST.
    REFRESH: IMESSAGE[ ] , IT_OBJBIN[ ]  , IT_OBJPACK[ ] ,  IT_RECLIST[ ].
    " populate the text for body of the mail
    CLEAR WA_IMESSAGE.
    CONCATENATE    'Board : ' P_BOARD ':' 'Please find  the excel attached for the list of Material whose routing is created'   INTO WA_IMESSAGE-LINE.
      APPEND WA_IMESSAGE TO IMESSAGE.
    "document information
      W_DOC_CHNG-OBJ_NAME = 'Excel'.
      IF NOT P_BOARD IS INITIAL.
        CONCATENATE    'Board : ' P_BOARD ':' 'List Of Routing Materials' INTO  W_DOC_CHNG-OBJ_DESCR.
      ELSE.
        CONCATENATE     'List Of' ' Routing Materials' INTO  W_DOC_CHNG-OBJ_DESCR.
      ENDIF.
      W_DOC_CHNG-SENSITIVTY = 'F'.  " ->Functional object
      " displaying  material , plant in the excel
      CONCATENATE 'BOARD NO : ' P_BOARD INTO WA_OBJBIN.
      APPEND WA_OBJBIN TO IT_OBJBIN.
      CONCATENATE 'MATERIAL' 'PLANT' 'DESCRIPTION' INTO WA_OBJBIN SEPARATED BY C_TAB.
      CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
      APPEND WA_OBJBIN TO IT_OBJBIN.
      CLEAR : WA_OBJBIN.
      LOOP AT IT_DOWNLOAD INTO WA_DOWNLOAD. "It_orders is the internal table to be transferred to excel
        CONCATENATE WA_DOWNLOAD-MATNR WA_DOWNLOAD-WERKS WA_DOWNLOAD-DESC INTO WA_OBJBIN SEPARATED BY C_TAB.
        CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
        APPEND WA_OBJBIN TO IT_OBJBIN.
      ENDLOOP.
      DESCRIBE TABLE IT_OBJBIN LINES V_LINES_BIN.   " no of lines for excel data
      " pack the data as RAW
      CLEAR WA_IT_OBJPACK-TRANSF_BIN.                     "Obj. to be transported not in binary form
      WA_IT_OBJPACK-HEAD_START = 1.                   "Start line of object header in transport packet
      WA_IT_OBJPACK-HEAD_NUM = 0.                     "Number of lines of an object header in object packet
      WA_IT_OBJPACK-BODY_START = 1.                   "Start line of object contents in an object packet
      WA_IT_OBJPACK-BODY_NUM = MESSAGE_LINES.         "Number of lines of the mail body
      WA_IT_OBJPACK-DOC_TYPE = 'RAW'.
      APPEND WA_IT_OBJPACK TO IT_OBJPACK.
      " pack the data as excel
      WA_IT_OBJPACK-TRANSF_BIN = 'X'.
      WA_IT_OBJPACK-HEAD_START = 1.
      WA_IT_OBJPACK-HEAD_NUM = 1.
      WA_IT_OBJPACK-BODY_START = 1.
      WA_IT_OBJPACK-BODY_NUM = V_LINES_BIN.         "no of lines of it_orders to give no of unprocessed orders
      WA_IT_OBJPACK-DOC_TYPE = 'XLS'.   " ->  excel fomat
      WA_IT_OBJPACK-OBJ_NAME = 'EXCEL ATTACHMENT'.
      " attachment name
      IF NOT P_BOARD IS INITIAL.
        CONCATENATE P_BOARD '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
      ELSE.
        CONCATENATE 'LIST' '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
      ENDIF.
      WA_IT_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
      APPEND WA_IT_OBJPACK TO IT_OBJPACK.
      " creating email id
      DATA: STR1 TYPE STRING,
          STR2 TYPE STRING,
          STR3 TYPE STRING,
          ITAB TYPE TABLE OF STRING.
      DATA : WA_I LIKE LINE OF ITAB.
      SPLIT P_EMAIL AT ',' INTO: TABLE ITAB.
    e-mail receivers.
      CLEAR WA_IT_RECLIST.
      LOOP AT ITAB INTO WA_I.
        WA_IT_RECLIST-RECEIVER = WA_I.
      WA_IT_RECLIST-RECEIVER = V_MAILADDR.
        WA_IT_RECLIST-EXPRESS =  'X'.
        WA_IT_RECLIST-REC_TYPE = 'U'. "->  Internet address
        APPEND WA_IT_RECLIST TO IT_RECLIST.
        CLEAR WA_IT_RECLIST.
      ENDLOOP.
      " sending mail
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA                    = W_DOC_CHNG
         PUT_IN_OUTBOX                    = 'X'
         COMMIT_WORK                      = 'X'
       IMPORTING
         SENT_TO_ALL                      =
         NEW_OBJECT_ID                    =
        TABLES
          PACKING_LIST                     = IT_OBJPACK
         OBJECT_HEADER                    =
         CONTENTS_BIN                      = IT_OBJBIN
         CONTENTS_TXT                      = IMESSAGE
         CONTENTS_HEX                     =
         OBJECT_PARA                      =
         OBJECT_PARB                      =
          RECEIVERS                        = IT_RECLIST
       EXCEPTIONS
         TOO_MANY_RECEIVERS               = 1
         DOCUMENT_NOT_SENT                = 2
         DOCUMENT_TYPE_NOT_EXIST          = 3
         OPERATION_NO_AUTHORIZATION       = 4
         PARAMETER_ERROR                  = 5
         X_ERROR                          = 6
         ENQUEUE_ERROR                    = 7
         OTHERS                           = 8
      COMMIT WORK.
      IF SY-SUBRC = 0.
        MESSAGE I001 WITH 'Routing is Created for Board' P_BOARD 'and Mail send on e-mail id :' P_EMAIL.
      ENDIF.

  • Sending email with 2 attachments in PDF Format

    Hi,
    I have 2 ALV Layouts, totally different in Structure.
    Now I need to convert these 2 ALV layout to 2 different PDF files and send email with thses 2 attachments.
    Can anyone provide me with sample report.
    I tried searching  for it  but there is no clue for ALV report-> PDF -> email.
    Thanks
    Mohan

    Hello,
    I doubt if you really searched before posting. You will find many posts indicating how to convert your report output be it ALV or classical into spool and then in to pdf. After you get the pdf binary format, its pretty much the same attaching those and sending E-mail
    Vikranth

  • Send Email with HTML format in Outlook Macro

    I can use the following to send email with HTML format in VBA. I also have created an HTML file. Is there a way to load the file into .HTMLBody to send it as HTML format message?
        Set OutlookApp = CreateObject("Outlook.Application")
        Set objMail = OutlookApp.CreateItem(olMailItem)
        With objMail
           .BodyFormat = olFormatHTML
           .HTMLBody = "<HTML><BODY>Enter the message text here. </BODY></HTML>"
           .Display
        End With

    Try: 
    Dim fso As Scripting.FileSystemObject
    Dim htmlFile As Scripting.TextStream
    Set fso = New Scripting.FileSystemObject
    Set htmlFile = fso.OpenTextFile("C:\path\to\my-html-file.htm")
    strInsert = htmlFile.ReadAll
    then change:
    .htmlbody = strInsert
    oh, and you need to set a reference to the Scripting runtime in Tools, References. 
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Send e-mail in HTML-format with attachment

    Does function SO_OBJECT_SEND allow to send e-mail with attachment?
    Does function SO_DOCUMENT_SEND_API1 allow to send e-mail in HTML format?

    Hi SS
    See if you can understand this sample program
    PARAMETERS: po_email TYPE AD_SMTPADR LOWER CASE.
    DATA: li_objcont TYPE STANDARD TABLE OF solisti1,
    li_reclist TYPE STANDARD TABLE OF somlreci1,
    li_objpack TYPE STANDARD TABLE OF sopcklsti1,
    li_objhead TYPE STANDARD TABLE OF solisti1,
    li_content TYPE STANDARD TABLE OF solisti1,
    lwa_objcont TYPE solisti1,
    lwa_reclist TYPE somlreci1,
    lwa_objpack TYPE sopcklsti1,
    lwa_objhead TYPE solisti1,
    lwa_content TYPE solisti1,
    lwa_doc TYPE sodocchgi1,
    l_lines TYPE i.
    REFRESH: li_objcont[], li_reclist[],
    li_objpack[], li_objhead[],
    li_content[].
    CLEAR: lwa_objcont, lwa_reclist,
    lwa_objpack, lwa_objhead,
    lwa_content, lwa_doc.
    MOVE '<body>' TO lwa_objcont.
    APPEND lwa_objcont TO li_objcont.
    MOVE '<p>' TO lwa_objcont.
    APPEND lwa_objcont TO li_objcont.
    MOVE 'This is a sample HTML content from test program' TO lwa_objcont.
    APPEND lwa_objcont TO li_objcont.
    MOVE '</p>' TO lwa_objcont.
    APPEND lwa_objcont TO li_objcont.
    MOVE '</body>' TO lwa_objcont.
    APPEND lwa_objcont TO li_objcont.
    lwa_reclist-receiver = po_email.
    lwa_reclist-rec_type = 'U'.
    APPEND lwa_reclist TO li_reclist.
    lwa_objhead = 'test.htm'.
    APPEND lwa_objhead TO li_objhead.
    lwa_content = 'Please find attached document for more details'.
    APPEND lwa_content TO li_content.
    CLEAR l_lines.
    DESCRIBE TABLE li_content LINES l_lines.
    READ TABLE li_content INTO lwa_content INDEX l_lines.
    lwa_doc-doc_size = ( l_lines - 1 ) * 255 + STRLEN( lwa_content ).
    lwa_doc-obj_langu = 'E'.
    lwa_doc-obj_name = 'Test HTML file'.
    lwa_doc-obj_descr = 'Test HTML file'.
    CLEAR lwa_objpack-transf_bin.
    lwa_objpack-head_start = 1.
    lwa_objpack-head_num = 0.
    lwa_objpack-body_start = 1.
    lwa_objpack-body_num = l_lines.
    lwa_objpack-doc_type = 'RAW'.
    APPEND lwa_objpack TO li_objpack.
    CLEAR: lwa_objpack, l_lines.
    DESCRIBE TABLE li_objcont LINES l_lines.
    READ TABLE li_objcont INTO lwa_objcont INDEX l_lines.
    lwa_objpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( lwa_objcont ).
    lwa_objpack-transf_bin = 'X'.
    lwa_objpack-head_start = 1.
    lwa_objpack-head_num = 0.
    lwa_objpack-body_start = 1.
    lwa_objpack-body_num = l_lines.
    lwa_objpack-doc_type = 'HTM' .
    lwa_objpack-obj_name = 'Test HTML file'.
    lwa_objpack-obj_descr = 'Test HTML file'.
    APPEND lwa_objpack TO li_objpack.
    *Sending the mail
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = lwa_doc
    put_in_outbox = 'X'
    TABLES
    packing_list = li_objpack
    object_header = li_objhead
    contents_bin = li_objcont
    contents_txt = li_content
    receivers = li_reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    operation_no_authorization = 4
    OTHERS = 99.
    IF sy-subrc NE 0.
    WRITE:/ 'Document sending failed'.
    ELSE.
    WRITE:/ 'Document successfully sent'.
    COMMIT WORK.
    ENDIF.
    This should give you all you need to know to send an HTML file.
    Thanks buddy

  • ViScanf invalid format string due to #sample size data1, data2,... response

    I'm writing a program which will utilize the internal memeory of the Agilent 34410A DMM for making fast measurements (10K/s).  In order to do this, I need to setup a test, have the data stored to the internal memory, then read and delete it, while other measurements are still happening.  The best command for the read/delete function is the R? command, but it returns the data in a strange format which breaks the ViScanf format string.  
    an example of the R? reading in below:
    R? 2
    #231+2.87536000E-04,+3.18131400E-03
    Is there a way to setup the ViScanf format string to handle this?
    Thanks
    Ryan

    Yes, I am using CVI
    If it was just returning one value I would use a simple viScanf function like this:
    viScanf (vi, "%f", fbuf);
    If you do a READ from in the instrument, it returns an array of floats so you need to adjust you viScan fuction parse the string into an array of floats like this (array of 500 for this example):
    viScanf(vi, "%,500f", fbuf);
    The problem is the data response to the R? command starts with the array size and is then followed by the data (#231+2.87536000E-04,+3.18131400E-03).  In the previous example, I need to delete the #, and parse the 231 into an array size variable and then fill an array (fbuf in this case) with the data.

  • Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When view prior to sending the document is divided with black lines after each sentence.

    Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When viewed prior to sending, the document is divided with black lines after each sentence.

    Windows will only be able to open these if you have Word 2007+. Older versions of Word, for example Word 2003 would require a compatibility pack.
    Perhaps you can try 'Saving As' a different file type instead?
    Regards,
    Steve

  • Format String with pattern

    Hi Folks,
    my Problem is that i need to format a String by using a pattern.
    The Input String is like "20081208" and the Output String has to be "2008-12-08".
    I could simply do this by using String.substring but i think it's not that elegant.
    Also i found a way by doing it with SimpleDateFormat.
    But it needs to much lines of code to do this as it's worth.
    Is there a simple way like String.format just to do this in one line?
    I'd like to pass the String which should be formatted and a format String to a method and it gives me the result.
    Thanks in advance,
    xtremliep

    Darryl.Burke wrote:
    System.out.println("20081208".replaceAll("(\\d{4})(\\d{2})(\\d{2})", "$1-$2-$3"));Note that if you're processing a large amount of data, this will almost certainly be slower than using a StringBuffer as already advised by two members.You can get a big performance boost by pre-compiling the regex and instantiating the Matcher ahead of time:
    static final Matcher matcher = Pattern.compile("(\\d{4})(\\d{2})(\\d{2})").matcher("");
    String newString = matcher.reset(oldString).replaceFirst("$1-$2-$3"); It will probably still be slower than the StringBuilder solution, but not by much. Of course, if the data is really huge, even a very small difference can have a noticeable impact.

  • "Invalid Keystore Format" with Java Web Start

    I got a user with a "invalid keystore format" problem He's running Windows XP and it happens when our java webstart application is starting up. He had a mix of java 5 and java 6.
    We uninstalled all his javas and deleted his c:\program files\java\jre6\lib\security\cacerts file as suggest by my company's support people and reinstalled java 6 U 22 and he still has the problem.
    The other users don't have a problem.
    How do we get our java web start application on work for him? It a java application and not a java applet.
    He got a new Dell laptop a couple of months ago and it has never worked for him. That model of laptop works for other users.

    the jar containing the native lib (win32com.dll) needed to be under the <nativelib> tag in the jnlp rather than <jar> .. duh!
    fixing that solved the problem :)

  • Dealing with Fixed Length formats both at sender and receiver side

    Hi all,
    I have file -- File with fixed lenght formats.
    Source system will generate a text file with fixed lenght and target also needs the same file with same format.
    Then we have an idea to implement the interface with out IR Development .this is fine upto now.
    But now the problem is we are receiving more fields from source than we require for target process. we are not using at receiver side.
    So receiving system needs only few required fields from the source file.
    From soucre
    Ex: Source....  DocNum   Invoice No   Bill date   Bill amount vendor code
    We require at target
    Ex: Target.....   DocNum  Bill Date Vendor code
    Please suggest me
    Regards

    Hi,
    >>The source file content conversion is simple...In the target when you specify the target field names just leave out the ones you dont need...
    from source we wil read all the fields, this is fine and in the target how to mention the field positions
    Here all fields will come into picture, we cant mention the positions at receiver
    Source side Ex: Docnum    InvoiceNo     Billdate     Bill Amt     Vendor
    Fixed lenghts are 10            20               10             10            20
    Target Expects Ex: Docnum   BillDate  Vendor
                                  10            10          20
    in receiver side if you mention fixed lenghts like 10 10 20 means it may read docnum, Invoiceno, BillDate
    It wont ignore InvoiceNo field in this case
    Regards

  • Invalid datetime format with odbc connection (VBA, Excel)

    Hello!
    I try to use QueryTable to extract data from the oracle-db.
    Source:
    sConn = "ODBC;DSN=" + odbc_dns + ";"
    Set oQt = tabelle.QueryTables.Add(Connection:=sConn, Destination:=tabelle.Range("a5"), sql:=sSql)
    oQt.Refresh
    As result I get this error message:
    "[Oracle][ODBC] Invalid datetime format"
    Is there any setting I need to do?
    regards
    Pietro

    Select to_char(entrydate,'dd/mm/yyyy) from usertable;Forgot the closing ' after yyyy.

Maybe you are looking for