Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When view prior to sending the document is divided with black lines after each sentence.

Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When viewed prior to sending, the document is divided with black lines after each sentence.

Windows will only be able to open these if you have Word 2007+. Older versions of Word, for example Word 2003 would require a compatibility pack.
Perhaps you can try 'Saving As' a different file type instead?
Regards,
Steve

Similar Messages

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

Ipod touch remains black, cant restore reset or conect with i tunes. tried resetting recharging but remains black. before it shut down i was warned that i didnt have space to load a app then the screen went white with black lines; kinda of like fuzz

is there another way to restart?

- After charging for half an hour see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Last, make an appointment at the Genius Bar of an Apple store.

There is an error when I want to reinstall the applications that came with my mac (after having reinstalled the Mac OS X DVD). What can I do?

I erased my hard disk and then installed the Mac OS X DVD. After having done this I wanted to install the applications too, for which I introduced the Applications DVD. The DVD is recognized and I follow the instructions given. On the last step, the installation, the Installer shows me a Message. It says that there is an error, and that I should contact the Software developer. It is very weird, because there is no error number or any other explanation. If somebody could help, I would be enormously thankful.

If you have a backup (and I hope you did one as before any potentially dangerous task), you can restore it.
If you don't, but have a recent system, you may try to boot in recovery mode.
If you can't, you have to get another computer (or simply your Windows Mac) to "burn" your system image either on a DVD or a flashdisk (.dmg are just .iso so you can change suffix).
Anyway, each and every data you had on you HDD, including 3rd party apps, would be lost.

I have a iPod touch 5th generation and when i turn on the device, its white screen with black lines and different colors

I can turn off the device naturally. But when i turn it on it shows all white with black lines and different colors. Is my LCD screen broken? If it is, can apple fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price

When I scan and save the document to pdf, it comes out complete grayed out. What did I do wrong?

When I scan and save the document to a pdf, it comes out completely grayed out. What did I do wrong?

Thank you. I already have that checked. After an update, it started doing this. Preferences> Display>Page Content & Info > Show large images is checked.
It is almost like a protection on the document that grays out all the content.

My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.

My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!

You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock

TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

I cannot delete a file from the document folder. I can move it to the trash and then empty the trash, but when I go back to the documents folder it is still there.

I cannot delete a file from the documents folder. I can move it to the trash and then empty it, but when I go back to the documents folder, the file is still there.

Gay,
I wonder what your computing environment is. Is your account being administrated by another account? Are you working in an account subject to "Parental Controls"?
Jerry

When upgrading to Lion, will the documents, photos etc get wiped off..?

When upgrading to Lion, will the documents, photos etc get wiped off..?

All it does is update the OS.
Which in no way implies that you don't need a backup prior to upgrading. While extremely unlikely, anything can happen in the process.

I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

Can your scanner software create PDF documents?

When user clicks on button the document linked to this path must be display

hi sap masters,
i am developing a screen prog in which i have a requirment which is i have pushbutton called WEB.
When user clicks on button the document linked to this path must be displayed
ex : www.google.com
how can i display can i have some info please.
thank you,
pasala.

Hi,
Kindly go through the below programs....
RSHTML01                       Demo for HTML Control: Use as general WWW browser
SAPHTML_R3HTTP_DEMO            Demo for HTML Control: Use as general WWW browser
SAPHTML_UI_DEMO                Demo for HTML Control: Use as general WWW browser
UPWB_HTML_DEBUG                Demo for HTML Control: Use as general WWW browser
Hope it helps.
Regards
Arbind

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

Snow leopard installed, but now unable to open documents????

Dear all,
Has anyone experienced more problems with snow leopard? I have installed it, but it seems that I am less able to open attached documents when people e-mail me and I have now also problems opening older Leopard documents (pages).
What can I do to resolve this?
Thanks,
Myra

I just installed the upgrade to Snow Leopard 10.6.2. When I try to open a .doc file in an email attachment IWork(pages) opens by default. I dont have iWork Pages and dont need it. When I right click on the document in the email and select either Neoffice or Appleworks or text edit, the file still tries to open in Pages. It wont open in any other program But of course I cant use it unless I buy it. I dont think I should be forced to buy iWork when I dont need it. Any suggestions?
This just started with the latest upgrade to Snow Leopard.

On my mac i accidentally deleted all my documents and now i cant play my songs from itunes but can on my phone and my photos are there but when i open them they are not but i can see some on my iphone but not all. How do i get these back or are they lost?

I accidentally dleted all my documents and emptyed the trash can. I can play my music on my iphone but not through my mac because it says it cant locate the file/original and my photos are on my computer but when i double click to open them they come up with an ! however some of the photos are on my iphone but just the ones i took using the camera function. Can i get this stuff back or it lost forever.....

At the AT&T store. Tried using iCloud but only 120 songs were transferred and when I access my iTunes account now it only shows 120 and not the 450 anymore that I purchased on my old phone. Tried to sync again from the phone to iTunes and it still not working.
I purchased everything under the same apple ID account I called apple support and spent almost 2 hours with tech support for assistance and we got disconected and they never called me back.
I'm at the point where I'm about to never purchase anything anymore from apple go to another company retrieve every single charge made on my bank account from iTunes and file a law suit against the company. It's being a week that I called for assistance and no one called me back to help me with this matter even after I responded a survey with a complaint about not getting a resolution to my problem.
If you could please help me I will appreciate, I'm out of the country now and can't stay on the phone for a long time.
I need to sell my old phone but as right now besides all my bank statements the old phone is the only evidence that I purchased the songs.

Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When view prior to sending the document is divided with black lines after each sentence.

Similar Messages

Maybe you are looking for