PREPARE_JSPM_QUEUE stuck message "The Stack XML .... is not supported"

Hi All
We have recently upgraded from SAP 4.7 SR1 to SAP ECC 6.0, Netweaver 7.00 EPH1.  We are in the middle of installing EHP4.  We have managed to get through the ABAP phase.  We are now on the J2EE phase.  We immediately received the following error:
"An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase."
"The stack XML /usr/sap/trans/EPS/in/SMSXML_CROSSSYS_20100211171349.693.xml" is not supported by this EHP installer".
I have looked at error logs PREPARE_JSPM_QUEUE_CSZ_01.LOG and TroubleTicket_01.txt but don't see anything wrong but I could be reading the logs incorrectly.
The .SCA files referred to in the xml file  are in the ../ESP/in subdirectory.  This problem seems similar to thread:
/thread/1562459 [original link is broken]
but I can't resolve the issue.
Any suggestions.
Thanks.
Stephen

for the other guys that had the same problem.
the problem is the generated xml file .
make sure
1) you have filled all the fields in SMSY for the landscape components under
SERVER
DATABASE
PRODUCT
2) you have connected the system with RFC wizard
3) for dual stack (very important)   you have
    a) flagged the NW AS JAVA and flagged the connection to system component of type JAVA (see the next point)
    b) flagged the NW ADOBE DOCUMENT SERVICES and flagged the connection to system component of type JAVA (see the next point)
4) created under LANDSCAPE COMPONENT --> SYSTEM COMPONENT --> JAVA
for
a) your solution manager entry  and compiled all the fields EVEN the part releated to DATABASE (otherwise you could have the error SYSTEM NO HOST in mopz)
b) your system in the case you cannot put your system under the SLD of solution manager SLD and in this case you MUST point your system to this entry
example of correct entry for JAVA
messageserver : hostname
dispatcher : hostname.domain..
PORT : java port
DATABASE : what you have put on database (with all the fields compiled even for it)
DB SCHEME : what you see from system-> status
Doing this you can selecte the dual stack XML that should have the CROSS in the middle of its name
Edited by: Bruno Astorino on Mar 31, 2010 6:07 PM

Similar Messages

  • Error message: "The Birthdays calendar does not support events."

    Error message: "The Birthdays calendar does not support events." pops up 100 times..probably as many times as I have birthdays in my contacts....very irritating...

    Well mother of christmas Apple, what the **** is this?! Please help us get this off the screen

  • Error Message: "The formula syntax is not supported by the report"

    We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
    I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
    doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
    But when I tried to Add FormulaField, it succeeds
    Please help me in knowing how to add SQlExpressionFields to ReportDocument.
    Regards,
    -atul

    Thanx Don & Ludek for the reply.
    CR provides support for addition/modification of SQLExpressions.
    CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
    CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
    innerReport .SQLExpressionFields.Add(name, strSQLExpression)
    CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
    Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
    Thanx
    -atul
    Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

  • HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

  • The invoked member is not supported in a dynamic assembly?

    I have an application that creates a report viewer control on a windows form.  It then creates a derived ReportClass using System.Reflection.Emit.   When the viewer ReportSource is set to the derived ReportClass we get the following message:
    The invoked member is not supported in a dynamic assembly.
    Any idea what is happening here?
    Are dynamically created types not going to work?
    Thanks,
    mike.

    It's entirely possible. The viewer's ReportSource does have COM dependencies for rendering the report. I haven't heard of anything specific to reflection and dynamic classes but from what I've heard there have been issues (not specific to CR) beween that and COM in general. I'm not well-versed in reflection so I can't speculate as to what the actual issue might be.
    If you want a finite answer from the Product Group on this one, your best bet is to log a message. Otherwise, were you looking for another workaround, other than the one you've already found?

  • SAP_BS_FND addon was not selected as part of the stack xml

    We are in a process of upgrading production system (SAP NW 7.0) to EhP1, we
    have components SEM-BW,FINBASIS installed in the Netweaver system, we have added the system under Netweaver
    We have generated the stack xml file using solution manager MoPZ but we are not
    getting the option to select the upgrade addon SAP_BS_FND as part of
    stack xml file
    where in we had an option to select the SAP_BS_FND for Development
    and Quality and we have included the addon SAP_BS_FND in stack xml file
    my main question was why the component is not available for Production for selecting the option ??
    Please suggest us how to proceed further, we have read the note Note
    1326576 - SAP NetWeaver Systems Containing SAP ERP Software Components
    which says to install the addon after upgrade
    generating the stack file from Service Market Place too is not including the SAP_BS_FND in the stack xml
    Please help why it is behaving different for production
    Thanks,
    Ravi
    Edited by: ravi prasad on Aug 8, 2011 9:56 AM

    Hi,
    >The note says that if going with EhP1 with ERP components then it asking to register the system in Netweaver and then >upgarde the addon package with SAINT
    You should read the note carefully, below is extract from this note:
    Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP
    system in SMSY in order to download the EHP packages and to be able to
    maintain the system. Afterwards you must not use the generated Stack XML,
    but instead use a generated Stack XML from SAP Service Marketplace and
    include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the
    IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0.
    Thanks
    Sunny

  • Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing".

    Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing". How can I correct this ?
    Thank you
    Tom

    I't not iWeb that got damaged but the domain file. The index.xml file is inside the domain.sites file that's located in your Users/Home/Library/Application Support/iWeb folder. Do you have a backup of that file you can revert to?  If so then do it.  Otherwise a long shot but try the following:
    close iWeb.
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
    go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • SAP BW query to BOBJ Universe: The supplied XML is not valid.

    Help!
    The Business Objects Sever XI is giving us messages like the below, on some  but not all BOBJ Universes based on SAP BW queries.
    A database error occurred. The database error text is: The supplied XML is not valid. [various InfoObjects] [LEVEL01] (WIS 10901)
    These queries were executing 1 working day, 3 calendar days ago. No transports to SAP BW or promotions to BOBJ were made.
    Any ideas?
    Thanks,
    John Hawk
    When we refresh the Universe, we get this mesdage
    Error getting hierarchies for dimension 0INFOPROV (Cube FIGL_M10/FIGL_M10_Q001): Exception condition "HIERARCHY_NOT_FOUND" raised
    Edited by: John Hawk on Jun 1, 2010 9:15 PM

    Hi John,
    I'm also getting same error 'Error getting hierarchies for dimension 0INFOPROV (Cube ZLE_M10/YBO_FREIGHT_ZLE_M10_UNIV_MPT1): Unknown error' when tried to create universe on top of query which is based on multi provider. Could you please send me copy of program ZZ_REPAIR_HIEDIR?
    Thanks,
    Milind

  • Could not initiate the BPEL process :the input xml is not well formed err

    Hi
    I am calling a bpel process from the bpel console. It is a syncronous process and just fetches values from the database. I see that when ever i call this for some inputs i get the following error , in the response.
    Could not initiate the BPEL process because the input xml is not well formed, the reason is :
    Error parsing envelope: (1, 6168) Invalid char in text. Please correct the input xml.
    When i see the log i have the following message
    fault.collaxa.cube.ws> <AdapterFramework::Outbound> Returning outbound XMLRecord for OutputParameters
    Exception: Error parsing envelope: (1, 6168) Invalid char in text.
    e.ws.saaj.soap.soap11.SOAPImplementation11.createEnvelope(SOAPImplementation11.java:103)
    e.ws.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:76)
    e.ws.saaj.soap.MessageImpl.getSOAPBody(MessageImpl.java:935)
    ate__ws._jspService(_ngDoInitiate__ws.java:455)
    erver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    .runtimev2.JspPageTable.service(JspPageTable.java:453)
    .runtimev2.JspServlet.internalService(JspServlet.java:591)
    .runtimev2.JspServlet.service(JspServlet.java:515)
    let.http.HttpServlet.service(HttpServlet.java:856)
    nd.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    urity.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    ity.AccessController.doPrivileged(Native Method)
    rity.auth.Subject.doAsPrivileged(Subject.java:517)
    I understand that the error is coming with parsing the output from the database values. Further i see the process is completed successfully when i see the flow and log and the out is present in the output response. Has any body faced this issue. What is that character that it is nto able to parse as the error says.
    Thanks
    -Pradip

    hi
    I have tried it using both xml and the initiate tab. I get the same error every time i do it for a particular value. i further think that this is occuring for the out put response that is got from the data base as the log says. ( given in the initial post). I can surely paster the input xml for you
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/top/InputXXESIOEHEADERSIFACE">
    <ns1:XxesiOeHeadersIfaceCollection>
    <ns1:XxesiOeHeadersIface>
    <ns1:orderSource></ns1:orderSource>
    <ns1:originalsystemreference></ns1:originalsystemreference>
    <ns1:customerNumber></ns1:customerNumber>
    <ns1:Country></ns1:Country>
    </ns1:XxesiOeHeadersIface>
    </ns1:XxesiOeHeadersIfaceCollection>
    </soap:Body>
    </soap:Envelope>

  • I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

    I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded".  Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • I recently purchased itunes match, but I get the message "The requested URL was not found on this server".

    I have had problems with playing music on my Iphone 5 from day 1.  I have purchased almost 500 songs in itunes, and only a handful would play.  I decided to purchase IMatch, but playing music is even more difficult.  It quickly skips through my playlists showing me the artwork/album cover for each song, and will occassionally play a song, but I mostly get the message "The requested URL was not found on this server". 
    Help Please!  I need my music on my phone for 2 hours/day!

    Ok, then as long as the videos reside on your PC, do the following:
    1) In iTunes on your PC, unsync the music videos (On the Music tab, uncheck "Include Music Videos, and then sync your iPad).
    2) Sync the music videos back to the iPad (check that same box again and sync once more).
    Does this fix it?

  • How to open a Numbers doc after message "The document (name) could not be opened." is received?

    I opened an Excel file with multiple worksheets by doubleclicking on it, saved it as a Numbers file and made lots of changes to it. Now I can't open it at all. All I get is the message "The document (name) could not be opened."
    Any ideas?

    It seems that your doc is corrupted.
    Try to rename it from ********.numbers to ********.numbers.zip
    then double click it
    You will get a new ********.numbers file with the structure 'package'.
    Try to open it by double-click.
    Sometimes it works.
    Yvan KOENIG (VALLAURIS, France) jeudi 22 décembre 2011 13:16:28
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

    How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

    You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
    If I upgrade to Yosemite will I be forced to go to the new Photos program
    No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
    Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

Maybe you are looking for

  • PO items not showing up in MR11

    the problem is the open items in the GL aren't showing up in T code MR11.  Usually when the lines are blocked they will not show up to post the clearing.  For the line items below the PO lines were NOT locked and they still weren't showing in MR11. w

  • Division calculation using different filters in OBIEE 11g

    Hello, I have a requirement where I want to calculate division of same column using different filters in one report. e.g. No. of Units (Where Active flag='A')/No. of units (Where Active flag='I'). I am using OBIEE 11g. Thanks.

  • Which all table contains a particular field

    Hi Can any one give me the query for finding which all tables in the database contains a particular field. Like I want to find out all the tables which has fields with field name like '%LOC%' Thank You .S

  • Update Missing links

    I would to batch the process of changing document to inches & update all missing links, save & close. The images are located in a folder in another volume. The script is changing document to inches but it is not updating the missing links. In what pa

  • Unable to install large applications in nokia 2690

    Hi, I want to install a collins dictionary .jar application in my nokia 2690 suite via bluetooth. It's around 8 mb big. However, an error occurs saying that the file is too big. First i used the ovi suite and then Windows explorer. It failed both the