Preparing Code for Ubot Studio

Hello,
I am looking to design my UI in Photoshop then slice it up and export my work into DW so I can code for UBot Studios User Interface Html window. I was wondering if there was a certain way to go about this. I realize the Adobe community might not be familiar with this software, however maybe there are some basic guidelines to follow so that when I export the code from DW it will work with UBots API? I am having some difficulty getting my design work to appear in the User Interface window, then obviously linking the buttons and search bars to my variables within Ubot...any help would be GREATLY appreciated!!!
best
WOLF

Similar Messages

Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error code -50) imovie 09 v8.0.6

When I try to export the movie I get this error code. Im doing a music video and have put days into it and now I can not get it to export! My other small project export with no problem.

Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated.

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Unable to Prepare Project for Publishing (error code -2015)

I have imported a Hi-def video from my Panasonic camera, edited it and am now trying to export it.
When I click on share ---> Export Movie ---> then click on large
I get the following error:
*Unable to prepare project for publishing*
The project could not be prepared for publishing because an error occurred. (Error code = -2015)

me no Unix expert. but -2015 reads as 'invalid time' of a movie file... whatever that means.. (?)
have you set time&date in your recording device correctly...?
have you set time&date in your Mac correctly...?
... that is only wild speculation, sorry, ... but worth a try

Code for Final Cut Pro 2 not being accepted by FC Studio 2

I upgraded to OS X 10.4.11 from 10.4.2. The FC Studio 2 icon would bounce a few times and stop, but nothing else would happen. 10.4.2 was reinstalled, erasing everything. An attempt was made at starting FCP 2, but the OS is not finding the files necessary in OS 9.
Upgrades Final Cut Pro 4 and FC Studio 2 were made since purchasing FCP 2 as a full package approximately 7 years ago, but FC Studio 2 is not accepting the code for Final Cut Pro 2. How do I correct the problem short of buying the full FC Studio 2 or buying a new hard drive?
Thank you.

It doesn't make sense to me either. As Thomas stated, the crossgrade that required you to send in your old FCP install disc was for Final Cut Studio version 1 (which included FCP 5.1) - NOT version 2. And regardless of the fact that you sent in your install disc, you should still have the serial number for FCP 4. It was printed on two stickers that were attached to the "Installing Your Software" booklet that was included when you purchased FCP 4 (upgrade or full retail versions).
There is NO need to have the old software installed in order to install and upgrade to FCS 1 or 2. All you need is the serial number form the older version; you'll be prompted to enter it during the install process for FCS 1 or 2.
FCP 2 may install on an OSX version, but will NOT run on ANY OSX version - it only runs on a full installation of OS 9.
-DH

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

Source code for "Creating an Extended Web Dynpro Application"?

Hello!
I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some help with is to find the source code for that tutorial so I can get som guidence from there.
Following text is cut out of this page:
http://help.sap.com/saphelp_nw70/helpdata/EN/5d/f42fef2eec724597a03b6bcc670c2c/frameset.htm
Creating an Extended Web Dynpro Application
You can download the Web Dynpro project for the current tutorial from the Software Developer Network SDN (http://sdn.sap.com -> Web Application Server -> Web Dynpro -> Sample Applications and Tutorials) in two versions: one skeleton version you can use for exercises and one final version (solution) for an immediate build, deployment and run on the Java engine of the SAP Web Application Server.
How hard I try I can't find the specific source code on sdn.sap.com
Does anyone have a clue where it is?
Thanks!
Best regards
/Johan Månsson Lindströ

Hi!
I did what you said but I seem to miss the IDE folder. This is what it looks in my Explorer
C: > Program Files > SAP > IDE > CE > eclipse > (no folder called "examples")
I also did a search in this eclipse folder for "examples" but I did'nt find the example I'm looking for
I am running a newer version of NWDS:
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP03 PAT0000
Maybe that's why things don't look the same?

Excel Importer for Visual Studio LightSwitch 2013

Has anyone managed to get the 'Excel Importer for Visual Studio LightSwitch' extension working with Visual Studio 2013?

Hi Kevin,
I assume you mean this extension here -
http://code.msdn.microsoft.com/silverlight/Excel-Importer-for-Visual-61dd4a90
From what I can tell that does not yet support VS 2013. The source code is of course available, so you could attempt to fix it up yourself and tell us the result.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Crystal report for visual studio 2005 dblogin problem

Dear Sir,
I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
also.
I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
[ODBC]
DRIVER=SQL Server
UID=sa
PWD=sa
DATABASE=HRISDB
WSID=S-AGD-PAY01\HRSERVER
APP=Microsoft Data Access Components
SERVER=S-AGD-PAY01\HRSERVER
so it is dynamic bcoz i need change server name sometimes. my question is when same report want show user from their pc then below screen appears:
database login
server Name: C:\program files\HRIS\HRISDB.dsn
Databse: HRISDB
user id:
PassworD:
Integrated Security: it is checked and a finish button.
(i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
Please help me how can I overcome it.
It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

You know, this forum is for controls, apis, components for the user interface Windows Forms.
Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
Try the Crystal reports forum for .Net
http://scn.sap.com/community/crystal-reports-for-visual-studio
Success
Cor

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

IPhone 3GS stuck in recovery mode, iTunes "Preparing iPhone for restore" nothing is happening.

When loading iTunes this morning an update that I had been putting off popped up and I figured since I was going to be in the house for a while I'd finally do it. An error took place that I foolishly ignored and made no note of.
My iPhone is now stuck in Recovery mode (I assume so anyway, after having googles my problem for hours), iTunes tells me I need to restore the phone and so I click to allow it to. It then gets to the "Preparing iPhone for restore" and just sits there, doing nothing.
I am unable to use my phone and I feel very much out of my depth as I have NO idea what to do. Any help (noob friendly) would be greatly appreciated.

I appear to have managed to fix the issue through googling the error code (rather than ignoring it this time), and figured I'd add the solution here for anybody in the future.
I simply moved my cable connecting my pc and iPhone to a USB port in the back of my computer rather than using the ones in the front and the process kicked off almost instantly without any further issues.

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125).

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why?

That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
In the Share to Media Browser dialog box choose the Large Size.
When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
Create a new project and click on the Media button near the lower right hand side of the Project Window.
Then click the Movies button in the Browser window just above that.
Under the iMovie star icon you should see the name of the project you shared out from iMovie.
Drag that into the project and burn the DVD.
If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
Bengt's tips for great DVDs

MySQL 5.5, Crystal Report for Visual Studio not working when hosted IIS

Software and Component detail
Microsoft visual studio 2010
MS .NET Framework
Version 4.0.30319 RTMRel
MYSQL SERVER Database
Version 5.5
MySQL Connector 6.6.4 64 Bit
MySQL ODBC Driver Version 5.2.a
Crystal Report for Visusl Studio 64 Bit 13.0.5
(CRforVS_redist_install_64bit_13_0_5)
Current Setup
1. I have WebSite in ASP.NET Visual Basic which works fine and is connected to MySQL Database, using MySQl Connector 6.6.4 64 bit
and is using a connection string,defined in web.confg.
2. I am using a Crystal report( It is very complex report, so cannot dare to redo it). Data Source for the report is set using a connection string
DRIVER={MySQL ODBC 5.2a Driver};SERVER=Licensedb;DATABASE=License;pwd=root;PORT=3306;OPTION=3 and this report is called from website using the below code
Dim crystalReport As ReportDocument = New ReportDocument()
Dim repPath As String = Server.MapPath("~/Reports/") + "LicenseReport.rpt"
crystalReport.Load(repPath)
CrystalReportViewer1.ReportSource = crystalReport
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
crystalReport.Refresh()
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
CrystalReportViewer1.Visible = True
3. The above setup works fine, when I run the website from Visual studio 2010. But when i use IIS 7, the aspx page having crystal report viewer control load and its blank.
However it work very well from studio it self.
4. So I changed the setup in point 2, by having a ODBC Data source defined. And changed the report accordingly. It work fine in Visual studio , but from IIS
it gives error "Failed to Open Connection, Failed to Open Connection <Crystal Report File name.rpt>"
5. I tried creating a System DSN and same connection string in IIS Application Connection string. But nothing changed.
Please can anyone point in correct direction. I must admit this is my first website development work, so I might have overlooked some minor details.
Any help would be much appreciated.
Thanks
Dilpreet ([email protected])

hello again. I fear that what is said in that article does not apply to my particular case.
First of all i am using the Crystal Report Basic 2008, which I think is not the same product as Crystal Reports 2008.
In addition, printing fails always, on my PC and on the web server.
On the other hand I can not find anywhere printcontrol.cab file or printcontrol.dll, just do not exist either in my PC or on the web server.
The folder where the report viewer is located is not CrystalReportViewers12, is CrystalReportWebFormViewer4, and is located at wwwroot\aspnet_client\system_web\2_0_50727\
Investigating I found something, but has not helped me:
[http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/0af08d25-dd71-41ce-92fa-ca374f933eaa/]
This problem is what always happens to me when on my local PC I access my web server by its public IP.
I think I must resign myself to use only the PDF print
thanks anyway

Preparing Code for Ubot Studio

Similar Messages

Maybe you are looking for