Prerequisite "Clusterware version" fail while applying 10.2.0.4 pachset
I've installed Oracle Clusterware and Oracle RAC 10gR2 on two nodes.
Now I'd like to apply latest pachset 10.2.0.4 available for Linux 32bit.
This is the output about my current versions:
[oracle@node1 ~]$ crsctl query crs activeversion
CRS active version on the cluster is [10.2.0.1.0]
[oracle@node1 ~]$ crsctl query crs softwareversion
CRS software version on node [node1] is [10.2.0.1.0]
Why am I getting the following prerequisite error ?
Checking Oracle Clusterware version ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The 'active' version of Oracle Clusterware is not 10.2.0.4.0.
Recommendation: You must upgrade all nodes of the cluster to Oracle Clusterware 10.2.0.4.0. If you have upgraded some but not all of the nodes to use the 10.2.0.4.0 version of Oracle Clusterware, then the 'active' version will not be 10.2.0.4.0. You must upgrade all nodes in the cluster to Oracle Clusterware 10.2.0.4.0 before proceeding with this installation.
Can I simply check this prerequisite (as User Verified) and continue to upgrade (first) the Oracle Clusterware and then the database ?
Thanks,
Marco
Looks like you are attempting to patch the ORACLE_HOME to 10.2.0.4 before patching the CRS. You have to first patch the CRS home to 10.2.0.4 and then your $OH.
Or possibly you are really intending to patch the CRS, but apparently you are selecting the destination home as $OH instead of $CRS_HOME.
HTH
Thanks
-Chandra
Similar Messages
-
Hi,
I'm following this
guide I'm getting an error when running the below command:
Set-VMNetworkAdapterVlan -vmname PurpleVM1 -Isolated -PrimaryVlanId 2 –SecondaryVlanId 4
Generates the following error:
Set-VMNetworkAdapterVlan : The operation failed.
Failed while applying switch port settings 'Ethernet Switch Port VLAN Settings' on switch 'New Virtual Switch': One or
more arguments are invalid (0x80070057).
A parameter that is not valid was passed to the operation.
Does anyone know why this is happening?
taHi TomG101,
It seems that there is a configuration conflict on the virtual switch port .
Also I tested the command on my lab , it works .
For troubleshooting please create a new virtual switch then try to configure again .
Any further information please feel free to let us know .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail -
Relinking failed while Applying VCP 12.1.3.8 PATCH (Patch -14247039)
Hi Hussain/All,
Apps : 12.1.3
DB : 11.2.0.3
OS : Linux 64bit
While Applying VCP 12.1.3.8 PATCH (Patch -14247039), got relinking failed.... continued by typing Yes as of now.
========================
adrelink is exiting with status 1
End of adrelink session
Date/time is Sat Feb 16 22:24:43 EDT 2013
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /d01/oracle/apps/apps_st/appl/admin/oracle/log/adrelink.lsv
New copy is /d01/oracle/apps/apps_st/appl/admin/oracle/log/adrelink.log
An error occurred while relinking application programs.
Continue as if it were successful [No] :
=============================
Thanks,
AbdullahAs it is a big file.. pasting some part of it.. adrelink.log file
collect2: ld returned 1 exit status
make: *** [d01/oracle/apps/apps_st/appl/msc/12.0.0/bin/MSCXGCAL] Error
1
Done with link of msc executable 'MSCXGCAL' on Sat Feb 16 22:24:34 EDT 2013
Relink of module "MSCXGCAL" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /d01/oracle/apps/apps_st/appl/msc/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'msc' on Sat Feb 16 22:24:34 EDT 2013
Starting link of product 'mso' on Sat Feb 16 22:24:34 EDT 2013
Current product is mso
Current product TOP is $MSOTOP
Current prodarea is /d01/oracle/apps/apps_st/appl/mso/12.0.0
Relinking module 'MSONEW' in product mso ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_mso_14501.mk
/d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW
Starting link of mso executable 'MSONEW' on Sat Feb 16 22:24:34 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW \
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/msonew.o \
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
/d01/oracle/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
/d01/oracle/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libilocplex.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libcplex.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libcplex.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a
-lsql10 -lclntsh `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
`.gnu.linkonce.t._ZN17SCOProfileOptionsC1Ev' referenced in section `.rodata'
of /d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdl.o):
defined in discarded section `.gnu.linkonce.t._ZN17SCOProfileOptionsC1Ev' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdl.o)
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomitemorgbkt.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomitemorgbkt.o
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresourcebkt.
o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresourcebkt.
o)
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomsupplierbkt.
o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomsupplierbkt.
o)
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdemandsatflo
w.o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdemandsatflo
w.o)
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresconsume.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresconsume.o
collect2: ld returned 1 exit status
make: *** [d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW] Error 1
Done with link of mso executable 'MSONEW' on Sat Feb 16 22:24:39 EDT 2013
Relink of module "MSONEW" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /d01/oracle/apps/apps_st/appl/mso/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'mso' on Sat Feb 16 22:24:39 EDT 2013
Starting link of product 'wip' on Sat Feb 16 22:24:39 EDT 2013
Current product is wip
Current product TOP is $WIPTOP
Current prodarea is /d01/oracle/apps/apps_st/appl/wip/12.0.0
Relinking module 'WICMEX' in product wip ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_wip_14543.mk
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
Starting link of wip executable 'WICMEX' on Sat Feb 16 22:24:39 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wimcmex.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wicmex.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/wps/12.0.0/lib/libwps.a \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/eng/12.0.0/lib/libeng.a \
/d01/oracle/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a \
/d01/oracle/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a \
/d01/oracle/apps/apps_st/appl/inv/12.0.0/lib/libinv.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a \
-lsql10 -lclntsh `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
chmod 755 /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
echo mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
echo
Done with link of wip executable 'WICMEX' on Sat Feb 16 22:24:42 EDT 2013
Done relinking module WICMEX in product wip
Relinking module 'WICMLX' in product wip ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_wip_14572.mk
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
Starting link of wip executable 'WICMLX' on Sat Feb 16 22:24:42 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wimcmlx.o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wicmlx.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/wps/12.0.0/lib/libwps.a \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/eng/12.0.0/lib/libeng.a \
/d01/oracle/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a \
/d01/oracle/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a \
/d01/oracle/apps/apps_st/appl/inv/12.0.0/lib/libinv.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a \
-lsql10 -lclntsh `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
chmod 755 /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
echo mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
echo
Done with link of wip executable 'WICMLX' on Sat Feb 16 22:24:43 EDT 2013
Done relinking module WICMLX in product wip
Done with link of product 'wip' on Sat Feb 16 22:24:43 EDT 2013
adrelink is exiting with status 1
End of adrelink session
Date/time is Sat Feb 16 22:24:43 EDT 2013
********************************************************** -
Relink of procbuilder fails while applying developer6i_patchset 19
I'am having a problem relinking procbuilder while applying developer6i_patchset 19 (6194129)
the error says shown below:
/usr/bin/ld: cannot find /M300i/DEV/devora/8.0.6/lib/stubs/libc.so.6
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
The compiler is looking for that file "libc.so.6" under "/M300i/DEV/..." directory, it is suppose to look under "/home/DEV/...." directory.
When we migrated our DEV instance Apps Tier last month, we initially migrated it to under "/M300i/DEV/" directory, but then later moved it to "/home/DEV/" directory and ran the corresponding autoconfig , now it looks like the compiler is still pointing to "/M300i/DEV/" directory.
shown below is what I tried to run and how it errored out:
[appldev@oracle lib]$ pwd
/home/DEV/devora/8.0.6/procbuilder60/lib
[appldev@oracle lib]$ make -f ins_procbuilder.mk install
rm -f de60desm /home/DEV/devora/8.0.6/bin/de60desm
- Linking de60desm executable...
gcc -o de60desm -L/home/DEV/devora/8.0.6/lib/ -L/home/DEV/devora/8.0.6/lib/ -L/home/DEV/devora/8.0.6/lib//stubs/ \
/home/DEV/devora/8.0.6/procbuilder60/lib/detk2.o /home/DEV/devora/8.0.6/procbuilder60/lib/demsr.o /home/DEV/devora/8.0.6/procbuilder60/lib/demcl.o \
/home/DEV/devora/8.0.6/procbuilder60/lib/ui10.o /home/DEV/devora/8.0.6/procbuilder60/lib/uiicxd.o \
/home/DEV/devora/8.0.6/rdbms/lib/defopt.o -lde60 \
-lca60 -lucol60 \
-lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
-luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /home/DEV/devora/8.0.6/lib/libpsd.a -lplsf -lplsb -lextp \
-lslax /home/DEV/devora/8.0.6/lib/nautab.o /home/DEV/devora/8.0.6/lib/naeet.o /home/DEV/devora/8.0.6/lib/naect.o /home/DEV/devora/8.0.6/lib/naedhs.o `cat /home/DEV/devora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /home/DEV/devora/8.0.6/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/usr/bin/ld: cannot find /M300i/DEV/devora/8.0.6/lib/stubs/libc.so.6
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
[appldev@oracle lib]$
Can someone help me to find out where is it that it is pointing to "/M300i/DEV/" instead of "/home/DEV/" ?
PrashanthiThank you Hussain,
That note helped me solve that problem, but I'am getting another error now, shown below:
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
Shown below is full error :
[appldev@oracle lib]$ make -f ins_procbuilder.mk install
rm -f de60desm /home/DEV/devora/8.0.6/bin/de60desm
- Linking de60desm executable...
gcc -o de60desm -L/home/DEV/devora/8.0.6/lib/ -L/home/DEV/devora/8.0.6/lib/ -L/home/DEV/devora/8.0.6/lib//stubs/ \
/home/DEV/devora/8.0.6/procbuilder60/lib/detk2.o /home/DEV/devora/8.0.6/procbuilder60/lib/demsr.o /home/DEV/devora/8.0.6/procbuilder60/lib/demcl.o \
/home/DEV/devora/8.0.6/procbuilder60/lib/ui10.o /home/DEV/devora/8.0.6/procbuilder60/lib/uiicxd.o \
/home/DEV/devora/8.0.6/rdbms/lib/defopt.o -lde60 \
-lca60 -lucol60 \
-lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
-luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /home/DEV/devora/8.0.6/lib/libpsd.a -lplsf -lplsb -lextp \
-lslax /home/DEV/devora/8.0.6/lib/nautab.o /home/DEV/devora/8.0.6/lib/naeet.o /home/DEV/devora/8.0.6/lib/naect.o /home/DEV/devora/8.0.6/lib/naedhs.o `cat /home/DEV/devora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /home/DEV/devora/8.0.6/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
[appldev@oracle lib]$
Prashanthi -
Work failed while applying the patch 3480000
Dear All,
Please Help
At the phase of applying the patch 3480000 while upgrading from 11.58 to 11.5.10.2
workers failed:
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
Time is: Tue Apr 05 2011 06:30:13
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.Hi Hussein,
Sorry for being late
next is output screen for patch 3480000
There are now 39641 jobs remaining (current phase=A84):
6 running, 216 ready to run and 39419 waiting.
Assigned: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
Assigned: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 4 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 1 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 3 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 6 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 2 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
next is last lines in adworker log file
adjava -mx256m -nojit oracle.apps.fnd.wf.WFXLoad -u &un_apps &pw_apps &jdbc_db_addr &jdbc_protocol US &fullpath_cln_patch/115/xml/US_cln2a12os.wfx
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"h:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\rt.jar;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\i18n.jar;h:\oracle\prodcomn\java\appsborg.zip;h:\oracle\prodora\8.0.6\forms60\java;h:\oracle\prodcomn\java"
Calling h:\oracle\prodora\8.0.6\jdk\bin\java.exe ...
Oracle Workflow XML Loader 2.6.2
Connecting to APPS@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD))) -- UTF8
Connected to (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD)))
SQL Exception encountered during upload: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'UPLOADOBJECT'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Fatal error encountered during upload between line 10 and 35
Error encountered when upload.
AD Run Java Command is complete.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Apr 05 2011 06:30:13
Thanks&BR
Tarek -
Automatic files deployment failed while applying HCM - MP4
Hi Nicholas,
i am applying MP4 using Change Assistant but it failed to automatically deploy the files in the PS_HOME directory.
so i manually copied files from the source package and placed into the respective directories in PS_HOME
Now while the change assistant was performing the job (1 of 3), i need to copy files from the 'classes' folder and have to place it in PS_HOME, but i did not see any 'classes' directory in PS_HOME
Regards,
Irfan Sheikh
2nd while the change assistant was performing the job (3 of 3), i need to copy files from the 'maint' folder and have to place it in PS_HOME, but i did not see any 'maint' directory in PS_HOME
so please guide me where should i place these files in PS_HOMEIrfan,
i need to copy files from the 'classes' folder and have to place it in PS_HOME, but i did not see any 'classes' directory in PS_HOMECheck $PS_HOME/appserv/classes
2nd while the change assistant was performing the job (3 of 3), i need to copy files from the 'maint' folder and have to place it in PS_HOME, but i did not see any 'maint' directory in PS_HOMEMAINT is nothing, but a depot folder. You can create it (generally in upper case) and put the files there.
Nicolas. -
Opatch failed with error code 74 while applying 4329444
Hi all,
Im on the way to Updrade 10.2.0.1 to 10.2.03 for installaing aplication management Pack
while applied patch 432944 using opatch
Opatch errored out with code 74
here are the logs
Invoking OPatch 10.2.0.1.6
Oracle Interim Patch Installer version 10.2.0.1.6
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /U00010.00/Grid/oms10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/oms10g/oui
Log file location : /U00010.00/Grid/oms10g/cfgtoollogs/opatch/opatch2008-05-30_11-54-49AM.log
ApplySession applying interim patch '4329444' to OH '/U00010.00/Grid/oms10g'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 4329444: Required component(s) missing : [ oracle.rdbms, 10.1.0.4.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/oms10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/oms10g/oui
Log file location : /U00010.00/Grid/oms10g/cfgtoollogs/opatch/opatch2008-05-30_11-54-49AM.log
INFO:Starting ApplySession at Fri May 30 11:54:50 IST 2008
INFO:Starting Apply Session at Fri May 30 11:54:50 IST 2008
INFO:ApplySession applying interim patch '4329444' to OH '/U00010.00/Grid/oms10g'
INFO:Starting to apply patch to local system at Fri May 30 11:54:50 IST 2008
INFO:Start the Apply initScript at Fri May 30 11:54:50 IST 2008
INFO:Finish the Apply initScript at Fri May 30 11:54:50 IST 2008
INFO:Patch 4329444 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 4329444
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4329444
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4620348
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4547445
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4488715
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4141076
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4067264
INFO:
Running prerequisite checks...
INFO:Space Needed : 616096
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 4329444
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 4329444: Required component(s) missing : [ oracle.rdbms, 10.1.0.4.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Fri May 30 11:54:53 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Fri May 30 11:54:53 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/oms10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
Please help me in solving this issueee
Regards,
PradeepCheck the steps to follow if you have already upgraded your repository database. I would suggets you read the upgrade guide thoroughly.
You already have another related thread here:
upgrading grid control from 10.2.0.1 to 10.2.03 -
OPatch failed with error code 73 while applying patch 5191377
hi,
while applying patch 5191377
i got the following error
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /U00010.00/Grid/db10g/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch-2008_May_29_15-36-47-IST_Thu.log
ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: Required component(s) [ oracle.sysman.repository.core, 10.2.0.1.0 ] not present in the Oracle Home or a higher version found.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
can anyone please help to solve this issue....
Regards
Pradeephi,
Please find the log
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5191377
INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
INFO:
Running prerequisite checks...
INFO:Space Needed : 629324
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
~
~
~
~
~
"/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C -
While applying the patch getting an error Failed:xdoloader.class on worker
Hi,
While applying the patch getting an error Failed:xdoloader.class on workerWhile applying the patch getting an error Failed:xdoloader.class on workerPlease post the details of the application release, database version and OS.
What is the patch number you are trying to apply?
Please post the complete error message from adpatch log file.
Thanks,
Hussein -
The final_patching_report.log is showing as follows:
----------START OF PATCHING REPORT------------------
* BIAPPSSHIPHOME Patching Report ..........
Patch Succeded: fsclite_rel7mlr2_16424872.zip
Patch Succeded: BISHIPHOME_11_1_1_7_0_GENERIC_130409_1210_16492220.zip
Patch Succeded: atglite_rel7mlr5A_database_16239380.zip
Patch Succeded: atglite_rel7mlr5_16480022.zip
Patch Succeded: fsmlitedb_rel7mlr2_16424869.zip
Patch Succeded: fsmlite_rel7mlr2_16424870.zip
Patch Failed: BISERVER_11_1_1_7_0_WINDOWS_X64_130326_2045_4_16583998.zip
Patch Failed: BIFNDN_11_1_1_7_0_WINDOWS_X64_130322_1000_5_16462147.zip
* Oracle Common Patching Report ..........
Patch Failed: p16433147_111170_Generic.zip
Patch Failed: p16080773_111170_Generic.zip
Patch Failed: Webservices_Patch-3-PS6RC3_bug-16487786.zip
Patch Failed: p16433036_111170_Generic.zip
Patch Failed: JDEVADF_REL7MLR10-RT_16525527.zip
Patch Failed: WebCenter_BP1REL7RC3_16311963.zip
Patch Failed: fmw_diagnostics_14757820_2.zip
Patch Failed: SOACOMMON_REL7B8_16438735.zip
* SOA Patching Report ..........
Patch Failed: SOA_REL7B8_16438735.zip
* ODI Patching Report ..........
Patch Succeded: p16629917_111170_Generic.zip
* Weblogic Patching Report ..........
----------END OF PATCHING REPORT------------------
The biappshiphome_win64_patches.log output:
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : C:\MiddlewareHome\Oracle_BI1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.9.9
OUI version : 11.1.0.9.0
Log file location : C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch detects the Middleware Home as "C:\MiddlewareHome"
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following files are active :
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice-api.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\common.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice.jar
Log file location: C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch failed with error code = 73
Similar output in oracle_common_generic_patches.log.
There is no output for Weblogic Patching Report.
Thanks,
NeerajHi Niraj,
in which method your going to install the OBIEE i.e in the Enterprise installation mode or software installation mode. have u edit the apply platform patch file. will you let me know content in the files.
Thanks,
Yogi. -
Opatch failed with error code 74 while applying patch 5191377
hi,
grid10g@appsnet6 5191377]$ opatch apply
Invoking OPatch 10.2.0.1.6
Oracle Interim Patch Installer version 10.2.0.1.6
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Please help meehi,
Thanks for the replyy
here is the log
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5191377
INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
INFO:
Running prerequisite checks...
INFO:Space Needed : 629324
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
~
~
~
~
~
"/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C
Regards,
Pradeep -
While applying patch 3653484, Relink of module "ar60desb" fails
Hi All,
While applying patch 3653484, Relink of module "ar60desb" fails
adrelink.log file entry
Starting link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
ld -s -H512 -T512 -bhalt:4 -brtl -L/erpbkp/oracle/tstora/8.0.6/lib
-L/usr/lib -o /erpbkp/oracle/tstappl/fnd/11.5.0/bin/ar60desb.new
/erpbkp/oracle/tstora/8.0.6/lib//s0main60.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/sslmdgtab.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xitsrw.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/xirpo.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/libpo.a
/erpbkp/oracle/tstappl/fa/11.5.0/lib/xirfa.o
/erpbkp/oracle/tstappl/fa/11.5.0/lib/libfa.a
/erpbkp/oracle/tstappl/ar/11.5.0/lib/xirar.o
/erpbkp/oracle/tstappl/ar/11.5.0/lib/libar.a
/erpbkp/oracle/tstappl/ff/11.5.0/lib/xirff.o
/erpbkp/oracle/tstappl/ff/11.5.0/lib/libff.a
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xirfnd.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/fdxsrw.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/libfnd.a
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecat.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecpf.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecty.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweats.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwepls.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxdsql.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweiap0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxsi.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/ui10.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/uiicxd.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsng.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwscl.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsdt.o -lrw60 -lgraphics60
-lobx60 -lge60 -locl60 -lnn60 -lrws60 -lde60 -lzrc60 -lrws60 -lnvu60
-lnvc60 -lnvs60 -lucol60 -luicc60 -lca60 -lmmiw60 -lmmov60 -lmma60
-lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -lvgs60 -luihx60 -luc60
-luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60
-luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60
-luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60
-lros60 -lrod60 -luat
60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib/libpsd.a -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib//libslax.a -lsql
/erpbkp/oracle/tstora/8.0.6/lib/nautab.o
/erpbkp/oracle/tstora/8.0.6/lib/naeet.o
/erpbkp/oracle/tstora/8.0.6/lib/naect.o
/erpbkp/oracle/tstora/8.0.6/lib/naedhs.o `cat
/erpbkp/oracle/tstora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr
-lnetv2 -lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lnetv2
-lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4
-lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lld -lm `cat
/erpbkp/oracle/tstora/8.0.6/lib/sysliblist` -lm
/erpbkp/oracle/tstora/8.0.6/rdbms/lib/kpudfo.o -lpthreads
-L/erpbkp/oracle/tstora/8.0.6/network/jre11/lib/aix/native_threads -ljava
-L/usr/lpp/X11/lib/R5 -lXm -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3
ld: 0706-010 The binder was killed by a signal: Killed
Check for binder messages or use local problem reporting procedures.
make: The error code from the last command is 254.
Stop.
Done with link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
Relink of module "ar60desb" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /erpbkp/oracle/tstappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Also, relinking modules ar60run, ar60runb, f60webmx, GLAMAS, GLAVAL, GLBAAC, GLBAAR, GLIDEL, GLIGEN, GLIXFR, GLLDEL, GLLEZL fails
Please suggest
Regards,
SKHi Hussein,
i was able to get rid of the relink error, as mentioned above
0706-010 Binder killed by signal Signal, was running out of some memory while linking object files...
continued with adpatch but facing
Failed: file FNDLOADSO on worker 1
worker log file entry:
Start time for file is: Wed Apr 29 2009 21:35:25
/erpbkp/oracle/tstappl/fnd/11.5.0/bin/FNDLOADSO &ui_apps UPLOAD &fullpath_fnd_patch/115/import_fndobjt.lct &fullpath_imc_patch/115/import/US_imc115ts.ldt
Uploading from the data file /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5), /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt) to staging tables
Dumping LCT file /erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5) into FND_SEED_STAGE_CONFIG
A database error occurred:
ORA-25153: Temporary Tablespace is Empty
The error occurred while executing the following statement:
INSERT INTO FND_SEED_STAGE_CONFIG (LCT_FILE, CONFIG_ID, ENTITY_NAME, STMT_TYPE, UPLOAD_STMT,GET_WHO_STMT, BIND_VAR_CNT, PK_VAR_CNT, ENTITY_METADATA, PROC_ID ,BIND_VAR0 ,BIND_VAR1 ,BIND_VAR2 ,BIND_VAR3 ,BIND_VAR4 ,BIND_VAR5 ,BIND_VAR6 ,BIND_VAR7 ,BIND_VAR8 ,BIND_VAR9 ,BIND_VAR10 ,BIND_VAR11 ,BIND_VAR12) VALUES( :lct_file, FND_SEED_STAGE_CONFIG_S.NextVal, :entity_name, :stmt_type, :upload_stmt, :get_who_stmt, :bind_var_cnt, :pk_var_cnt, :entity_metadata, :proc_id ,:bind_var0 ,:bind_var1 ,:bind_var2 ,:bind_var3 ,:bind_var4 ,:bind_var5 ,:bind_var6 ,:bind_var7 ,:bind_var8 ,:bind_var9 ,:bind_var10 ,:bind_var11 ,:bind_var12) RETURNING CONFIG_ID INTO :config_id
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
Time when worker failed: Wed Apr 29 2009 21:35:25
Evaluating symbolic arguments ....
Done evaluating symbolic arguments.
Could you please suggest?
Regards,
Krishnaraj -
OPatch failed with error code 74 while apply patch 10093985 - 10352313
Hello,
In OBIEE 11g, we had a problem that the map only appear if the language selected is English. To fix this error we need to install de pach "10352313" who fix the bug "10093985". I make all the steps that are in the manual. Download the last OPatch, install and configured. All the prerequisites are ok. When I went to the folder of the patch to run the comand "opatch apply -jre $ORACLE_HOME/jdk/jre" I had this error:
$ opatch apply -jre $ORACLE_HOME/jdk/jre
Invoking OPatch 11.2.0.1.4
versão do Installer Temporário Oracle 11.2.0.1.4
Copyright (c) 2010, Oracle Corporation. Todos os direitos reservados.
Oracle Home : /oracle/Middleware/Oracle_BI1
Inventário Central: /home/oracle/oraInventory
de : /etc/oraInst.loc
Versão de OPatch : 11.2.0.1.4
Versão de OUI : 11.1.0.8.0
Localização de OUI : /oracle/Middleware/Oracle_BI1//oui
Localização do arquivo de log: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch2011-02-15_07-08-59AM.log
Patch history file: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/oracle/Middleware"
ApplySession aplicando o patch temporário '10093985' para OH '/oracle/Middleware/Oracle_BI1'
Running prerequisite checks...
Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
The details are:
Patch ( 10093985 ) is not applicable on current platform.
Platform ID needed is : 46
Platform IDs supported by patch are: 226
ApplySession falha durante as verificações de pré-requisitos: Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
Sistema intacto; o OPatch não tentará restaurar o sistema
OPatch failed with error code 74
I saw that the Platform ID needed is : 46 but the Platform IDs supported by patch are: 226. But this patch is for linux x86-64, and I didn't understand why it doesn't work. The machine is a Intel(R) Xeon(R) CPU 3050 @ 2.13GHz. Can anyone give a hand? Thanks for the help.Hello again,
To resolve this problem I did this steps:
1)./opatch lsinventory -invPtrLoc /oracle/Middleware/Oracle_BI1/OPatch/oraInst.loc
2)export PATH=$PATH:/oracle/Middleware/Oracle_BI1/OPatch/
3)export ORACLE_HOME=/oracle/Middleware/Oracle_BI1
4)export OPATCH_PLATFORM_ID=226
5)opatch apply -jre $ORACLE_HOME/jdk/jre
If anyone have any questions is just say!
Ty -
Getting error while applying psu patch on 11.2.0.2.0
Hi All,
I am getting one error while applying psu july patch on top of 11.2.0.2.0
If anybody has the solution please answer:
Below is the code sample:
[oracle@host01 16619893]$ opatch prereq CheckConflictAgainstOHWithDetail -phBase Dir ./16619893
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
PREREQ session
Oracle Home : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
from : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version : 11.2.0.3.4
OUI version : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/ opatch2013-06-28_02-08-44AM_1.log
Invoking prereq "checkconflictagainstohwithdetail"
Prereq "checkConflictAgainstOHWithDetail" passed.
OPatch succeeded.
[oracle@host01 16619893]$ opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
from : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version : 11.2.0.3.4
OUI version : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/ opatch2013-06-28_02-10-02AM_1.log
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following executables are active :
/u002/app/oracle/product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.
Log file location: /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/o patch2013-06-28_02-10-02AM_1.log
OPatch failed with error code 73
[oracle@host01 16619893]$ ps -ef |grep libclntsh.so.11.1
oracle 15943 15446 0 02:11 pts/3 00:00:00 grep libclntsh.so.11.1
[oracle@host01 16619893]$
Why I am getting that error? And how to check wheather lobclntsh.so.11.1 is running and how to kill it?
Thanks in advance.See the below link
Oracle DBA and RAC DBA Expert: Reason: Cannot apply patch due to fatal error & CheckActiveFilesAndExecutables failed
I hope it resolves your issue.
Regards,
http://www.oracleracexpert.com
Maybe you are looking for
-
Always having the same info in the IDOC when sending to R3
Hi. I have a FILE -> XI -> R3 (IDOC) scenario. The problem that i'm having is that the IDOC that is arriving to R3 is arriving with the same info. It doesn't matter the info that is comming in the FILE. The IDOC is being filled with an old info. Any
-
Vendor Bank account details not appearing in DME file
Hi SAP gurus, We have maintained bank information for vendor in the master record and also configured the field FPAYH-ZBNKN in the DME structure to retrieve bank information and pass to the DME file.However the values are not passing to the DME outpu
-
Why do I have to use more than one click to bring objects in - Keynote?
I have built a number of presentations and when I play some of them back, I have to click the mouse more than once to move an object in. Any one help me as it would be easier just to click once. Thanks
-
Depreciation planned in FA explore
Hi , I set fixed asset take-over time 31.12.2008 and specify last period post in prv. system 12.2008. But after I used AS91 to create legacy data I found in fixed asset master data the planned depreciation only from period 5 in 2009. I am wonderi
-
HT5093 What collada nodes are supported in iBooks author?
There are many, many nodes available within the Collada framework, and iBooks only supports a handful of these. For instance, iBooks supports uv mapped textures, but not alpha channel maps. I think it supports animation, but I don't know what are th