Pretty tech question here but if anyone can help I'd be so grateful..
I've just updated from logic 7 to Logic 8.
I'm currently working on a remix for a record label, I'm experiencing problems on playback in Logic 8 - basically it wont playback and cites this warning:
**"Logic pro has detected a possible conflict between one or more third party MIDI audio drivers.**
*Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers."*
I don't have a Roland MC505 in my studio, I'm running a MOTU 828mk2 and
I have the most updated driver for my sound card installed.
In Logic 7 I get the message below but playback isn't effected and I can access the entire project.
*Instrument “Roland MC505” sends to a MIDI port named “EDIROL UM-2” of musical interface “EDIROL UM-2” which no longer exists.*
*Please check if all MIDI interfaces are connected and switched on; otherwise adjust the instrument’s MIDI out port setting.*
If anyone can help I'd me most grateful..
My first thought, is for you to check your environment.
If the song you're working on started out originally from someone else's Logic session, Their may be a Roland MC505 instrument in the MIDI layer of your environment.
Hit Apple/8, and select MIDI from the tab in the upper right. Select and delete anything in there that doesn't apply to your set-up directly.
See if that's what's going on...
Similar Messages
-
If anyone can help i would be hugely grateful, I'm literally pulling my hair out.
I bought the Airport express so i could surf the web and wireless play music through my stereo simultaneously. Can I do this? I've managed to play music wirelessly from my macbook to the express/stereo, however i cant surf the web because i can only presume i haven't set up the express to join my sky network. So therefore the only way to surf the web at the moment is swap wireless devices from express back to my current sky network, then the airplay stops obviously.
I've tried to join the express to my sky network/netgear router, at face value it looks simple. The sky network name automatically comes up and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using, then type in the password which i presume is the network key number on the back of the netgear router? However its not connecting?? I am doing something wrong?
Can someone please give me some guidence on how to connect express to my current network?and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using
Suggest that you ask Sky what type of wireless security that is used on the devices that they provide.
Once you have that information, you can choose the correct matching setting when you configure the AirPort Express to "join" the Sky wireless network.
The "password" would be the normal phrase that you use to connect to your wireless network at the present time. -
I have been having this problem since the 4th of this month. I tried to open iTunes and this error message came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". There is nothing else that comes up but if anyone can help or know anything about it I will greatly appreciate it.
Have you tried google for this Error Message...
http://support.microsoft.com/kb/959077 -
I buy an iPhone4s in Saudi Arabia but i dont have facetime.. now im here in Philippines i still dont have facetime.. anyone can help me
No one can help.
Your iphone will never have facetime.
It is not permitted on iphones sold in manhy Middle Eastern countries. -
hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me
Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks
Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?
-
I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?
Check here, if this can help:
http://support.apple.com/kb/HT4670?viewlocale=en_US -
When I launch my iTune 10.6.1 , it suggests an update to 10.6.3 . But when I click to update , it fails to detect any latest version . Anyone can help ? Thanks .
or download the standalone installer here:
http://www.apple.com/itunes/download/
Regards. -
I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?
Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC -
my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts -
In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum descHi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan -
i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!
I should have added to my posting (instead of using this "reply" - it is the server passwork it is asking for and I have never known that I had one and assumed it was the passwork I always used for this type of thing.
-
Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!
You need to upgrade OS X.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
i bought my macbook pro on 2013 but last few months its become very slow , is there anyone can help me please ?
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Maybe you are looking for
-
Error when create DGMGRL configuration.
When I add database standby in my configuration I receive this error message : DGMGRL> add database pij10g2 as connect identifier is pij10g2 maintained as physical;Error: ORA-16796: one or more properties could not be imported from the database Faile
-
BellSouth Alcatel DSL Modem and Airport Extreme
I have a new iMac, and BellSouth DSL Internet service (alcatel modem). I get an Internet connection when connecting the modem directly to iMac using an ethernet cable. However, when I try to configure my Airport Extreme 1 of 2 things happens: a const
-
Flash 10.3 installed ok but Player 9 activates for standalone swf files
This is a rather interesting scenerio. I am running Vista 32 Bit (upgrading to Win 7 soon), using IE9 and I am trying to view .swf files that require Flash Player 10. No problem, I uninstalled all Flash Player components using the Flash Player uninst
-
XDK upgrade problems (9.0.4 to 10.1.0.2)
We are currently on version 9.0.4 of the XDK which came with our application server installation. I would like to upgrade our j2ee applications to use 10.1.0.2. It appears during the installation two XDK's are installed. One for the infrastructure (/
-
What's the font used in Steve Job's biography?
Hi, What's the font used in Steve Job's biography? Not the titles or the sub-titles with italics, the paragraphs. I love this font and i want to know it's name. Please help and thanks!