Prevent pop up message during loading of data through LSMW
Dear all,
I have created an LSMW program to load data. In the recording an POP up screen appears which has the information "Do you want to adopt the data" YES/NO/CANCEL.
I have recorded the program by selecting NO. Still during uploading of data, the screen appears, expecting the selection of an option. This pop up is from SAP standard program and by default the option is YES.
I expected that this message will be ignored if "background processing " option is selected, but this is not so, during background processing, the load fails with error.
I searched in this forum and was successful in getting a little clue of suppressing the message which is as mentioned in the below message.
Question :- [https://forums.sdn.sap.com/click.jspa?searchID=30750356&messageID=4218861]
I tried as per the option but i am not very clear of what syntax should be maintained to suppress the message box.
We are in R/3 4.7 version.
Note :- My requirement is slightly different from what is asked in the thread mentioned above, i only want to suppress the message box and proceed with the loading.
Can any of the experts provide solution for solving my problem.
Regards,
M.M
Edited by: Magesh Magesh on Aug 24, 2009 11:40 AM
Dear Mr. Rahul,
Thank you very much for your reply. I am using the t.code QM01. In this after entering the Material, revision level, plant, production order and operation number, when i present enter, the pop up appears. I want to suppress this pop up with values either NO or CANCEL.
Kindly help me solve my problem.
Regards,
M.M
Similar Messages
-
Can I stop the pop up message to activate cellular data with getting the cellular dataplan
I Have an iPad Air2 with WiFi plus cellular. At the present time I do not want to activate the cellular service but keep getting a pop up message to activate cellular data. How do I stop the pop up message? Should I take out the SIM card? Would rather not do that.
I found a good answer here:
http://forums.macrumors.com/showthread.php?t=1813919 -
We can able to load master data through manually FIRST ROW IS EMPTY
Hi,
we can able to load master data through manually without loading but in that screen where we we type the data FIRST ROW IS EMPTY.PLZ tell me why that is emptyBecasue SAP BW already creates a Blank Line, it cannot create a new one again for you.
So, when you loaded the Blank like with description, it uses the existing blank line and creates test for it.
Each row in the table will have a SID.
e.g.,
12345 text1
23446 text2
You cannot have
12345 text1
12345 text2
If you load the above, you will have "12345 text2" in the table.
Same way, you cannot have two SIDs for the same key, so your new text is used for the existing Blank Key value.
SAP creates this:
Key, Description
when you loaded the Master Data, you have:
" ", "whatever you loaded".
Edited by: Ananda Theerthan on Apr 27, 2010 7:03 AM -
Need to load the data through excel for plan data through IP?
Hi all,
The user needs to load the data through the excel and click on the save button so that the data is saved in the cube through integrated planning.
The objects used are
customer, material, plant, calendarmonth sales qty, gross billing!!
Can anyone pls let me know how to do this?
ThanksHi,
You can use the following How to guide to load data from file into transactional cube.
If using IP :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c?quicklink=index&overridelayout=true
Can also Refer to Marc's Blog:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
If you are using bPS you can get the details in Wiki also for the same.
You can then create the hyperlink in Excel ,which user can use to upload data which can then be saved to cube using save button. -
Down load the data through BDC
Hi ,
I need to know how to down load the data through BDC , pls suggest me how we can do through data download through only BDC u2013 with datas-- Act group, Sales area ,customer pricing procedure ,shipping condition of customer master.
If you need ant further information pls let me know
Regards
Shivashttp://help.sap.com/saphelp_47x200/helpdata/en/67/42fcccf61011d1bcf9080009b4534c/frameset.htm
http://www.sapunleashed.co.uk/bdc/bdc_recording.htm
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm -
Upload Property Master Data through LSMW
I am using the following BAPI to upload the Property Data through LSMW.
Business Object: BUS1502
Method: CREATE
Message Type: BUS1502_CREATE
Basic Type: BUS1502_CREATE03
There are two issues which needs to be addressed and hope that this forum can help me out.
1. In this BAPI, i dont see the field mapping for Company Code and Business Entity, both mandatory fields for creating a Property record.
2. Skipping the first step, i reached the step "Start IDoc Generation" in LSMW and get the following error.
EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is empty.
Anyone encountered these issues? Suggestions to resolve these issues?
HamdanHello Hamdan,
First of all, good decision to use BAPI + LSMW it is the best way to load DATA specifically in REFX. Here's answer to your questions.
1. Pass Company code, BE, other header level fields in E1BUS1502_CREATE structure. This is the main Header structure of the Baisc type you are using. Create source structure with these fields and mapp it to the BAPI fields and you are all set.
2. Check the EDI_DC40 element, or other structures if you are passing values. SAP/System will fill/populate these values on its own, do not pass any values example in fields DOCNUM, CREDAT, etc.
Good luck,
Jag -
Pop Up message for Contract expiration dates
Hello, Experts,
I am looking for a way to customize (If it's possible) a message as a pop-up.
The message I want to become a pop up is the message about the expiration
date of a contract, which is displayed when creating a SC from an expired contract.
Thank you for the help !
Regards,
Rami Kleiman
HPHi
Contracts can be monitored by scheduling jobs so that Buyers get notification on fund / valid period by .bbp_contract_check
contracts validity / fund can be indeed refered while shopping cart turn to purchase order.
Hope you could have refeered Ricardo article on this
http://wiki.sdn.sap.com/wiki/display/SRM/Contractvalidationdoesnotoccurwhencreatingashopping+cart
Muthuraman -
Pop up message during MIRO when Downpayment exist for the Vendor
A Vendor is already having Downpayment of some amount, while doing Invoice Verification (MIRO) for this vendor one Pop up message is coming "X Currency Name of Company Vendor Account Group Exist".
In this case when the downpayment amount is Rs. 100, Currency is EUR, Description of Vendor Account Group is Third Party Vendor & Company name XY, the pop up message is coming as "100 EUR XY Third Party Vendor Exist".
While Checking the message through SE91, the message(F5096), the description is written as "&&& exist".
Why the message is not coming like this, "100 EUR Downpayment exist".
I want to know where the setting lies.
Nalini Kanta Dasmilkmansrevenge wrote:
I have since tried to make a JOptionPane appear in a seperate thread Not good since all Swing GUI components must be called on one thread only, the EDT. I'd recommend either creating a JOptionPane as a JDialog (the API will show you how) or just create a JDialog, and show either one in a non-modal way using a Swing Timer to dispose of them when a time period is up.
for example:
JOptionPane optPane = new JOptionPane("This is my message");
// here FooFrame is the enclosing JFrame. This needs to be changed
final JDialog dialog = optPane.createDialog(FooFrame.this, "Dialog Title");
dialog.setModalityType(ModalityType.MODELESS);
dialog.setVisible(true);
int duration = 2000;
Timer swingTimer = new Timer(duration, new ActionListener()
public void actionPerformed(ActionEvent arg0)
if (dialog != null && dialog.isVisible())
dialog.dispose();
swingTimer.setRepeats(false);
swingTimer.start();Edited by: Encephalopathic on Mar 29, 2009 3:23 PM -
Dear sir ,
In Service Master for a specific type of services where "work contrct tax" is applicable , we mention Service Type as "WCT" . Our requirement is that at the time of MIRO , a message / pop-up message should be appeared on screen indicating that "Work contract tax need to be deducted" .
Please guide me how can we achieve the desired functionality .
Regards
B V MittalDear Mr. Rahul,
Thank you very much for your reply. I am using the t.code QM01. In this after entering the Material, revision level, plant, production order and operation number, when i present enter, the pop up appears. I want to suppress this pop up with values either NO or CANCEL.
Kindly help me solve my problem.
Regards,
M.M -
File not found message during load
I am trying to ascertain what resource my built EXE can not find during startup. While the reource IS ultimately found, and the APP runs, it displays the "VI not found" dialog during load.
Any good way to either silence this dialog box of ascertain programmatically which VI is in the wrong location?If you do have VI which is to be loaded dynamically...
This VI might be of helpful in one way or another in the VI's calling path.
Hope I got your problem right.
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
_findbasedir.vi 17 KB -
Error During Loading Master Data
Hi Gurus,
I'm loading master data from R/3 to BW 3.5 but i'm getting the following error for all the Infosources
"Request IDoc : Application document not posted"
Can anyone help me out of this
Thanking you inadvance
R.SaravananHi Saravanan,
Check this previous postings on the same issue.
InfoPackage loading giving IDOC Error: Status 51
Application document not posted
Cheers,
Aravindhan -
Issue while loading Master Data through Process Chain in Production
Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
BhanumathiHi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan -
Load Service Contract data through LSMW
Hi,
I am trying to load the service plan item data for service contract through LSMW.
I am able to load everything except service plan item detail.
FM - CRMXIF_ORDER_SAVE
I am passing the following fields in the following structure.
Structure - E101CRMXIF_SRVPLAN_I
Fields
Cycle - 2
Unit - WEE
Rule Name - SPLA_TIME
Structure - E101CRMXIF_SRVPLAN_IE
Fileds
SRVPLAN_TYPE - T
CYCLE_TYPE - C
Could you please let me know if I am missing any detail to be passed?
Thanks,
Anup GargHi,
Do it like this way:- come into recording screen and give tcode PA40 now select in PA40 screen hiring action>execute> fill the details>save when 0001 screen wil open click on back button.> now in second step> give any name and discr.>save>back> third step> click on table button and give >
PERNR c 8
EINDA ddmm 10
SELEC_01 c 1
BEGDA ddmm 10
ENDDA ddmm 10
MASSN c 2
MASSG c 2
PLANS c 8
WERKS c 4
PERSG c 1
PERSK c 2
4) save it
5) select PA40 click on etras> auto feild mapping press enter when date format will come select 2nd option. save
7)specify flat file with tabular option
8) assign it
9, 10,11,12,13 & 14 just execute
Thanks and regards,
ARU -
Loading master data through process chain
Hi Gurus
I am designing the process chain , I know that I have to start by loading master data first for that I am planning to load attribute first and then to load text and then Hierarchy. Is that the right sequence?
Also how can I make sure that once the master data is loaded , the transaction data loading start automatically?
I am planning to put attribute chage run as last process in every master data loading . Is that correct?
Also i would appreciate if you can tell me the very first step I should follow to start my design, I have already identified the master data and transaction data and their respective dependancies.what would be my next step?
Thanks for your help in advance.
KrisHi Kris,
Make two seperate Process Chains for Master Data and Transaction Data
For Master Data:
Your sequence is absolutly correct, Identify what all Master Data Objects and make a list of InfoPackages and Start creating Process Chain as
Start --> Attribute --> Text --> Hier --> Attr Change Run
For Transactional Data:
Identify the Data Targets and the Sequence of loading, then create the Process Chain
NOTE: Always Master Data should be loaded before Transaction Data
After Creating different Chains for Master Data and Transaction Data, Make a one Super Chain called Meta Chain where you can put all these process chains,
Meta Chain --> Process Chain 1( Master Data Chain) --> Process Chain 2( Transaction Data)
also check these threads for process chain creation
Re: Process Chain : Master Data
Re: process chains ?
Hope this helps,
Sudhakar. -
Uploading HR Master Data through LSMW or BDC
I want to upload the HR Master Data to the system through LSMW or BDC, I am aware that for some infotypes like 000,1 &2 BDC is more suited, whereas for other infotypes LSMW is more convenient. I would like to understand how to start the activity. Should I start with infotype 0000 first and then 0001 and so on or can I take any infotype randomly and upload? What I mean is, is there any dependency that an infotype data can be loaded only after certain other related infotype data is loaded first? e.g. can load infotype 0006 first and then infotype 0001?
Also please guide me on for which infotype LSMW is preferred and for which infotype BDC is preferred? Can BDC be used within LSMW?
-ShambhviHi,
Do it like this way:- come into recording screen and give tcode PA40 now select in PA40 screen hiring action>execute> fill the details>save when 0001 screen wil open click on back button.> now in second step> give any name and discr.>save>back> third step> click on table button and give >
PERNR c 8
EINDA ddmm 10
SELEC_01 c 1
BEGDA ddmm 10
ENDDA ddmm 10
MASSN c 2
MASSG c 2
PLANS c 8
WERKS c 4
PERSG c 1
PERSK c 2
4) save it
5) select PA40 click on etras> auto feild mapping press enter when date format will come select 2nd option. save
7)specify flat file with tabular option
8) assign it
9, 10,11,12,13 & 14 just execute
Thanks and regards,
ARU
Maybe you are looking for
-
View the contents of an ods without writing a query
hello everyone i am new to BW. i did everything there was to do to create an ods... i scheduled the data load. it was successfully done. now when i am going to the "manage data targets" to view records in the ods i am unable to see any records there.
-
How can i get my curser to work on all the screen
My curser is only working on %90 of my screen and i dont know why. with Lightroom 4 there is still no problem with it working on my Mac Book Pro. Im stumped
-
Can I use the same iTunes folder on multiple pcs?
Hello, I am using a hp laptop and desktop pc to stream (home sharing) to my Apple TV 3. My laptop is running windows 8 and the desktop is running XP Pro. Firstly, can I organise my iTunesw (video and audio) library to a western digital 'elements' ext
-
Hello, I have one requirement where I want to show the data as follows Type Metric Values Type1 units 100 Days 50 % Calc 10% Type2 units 100 Days
-
Sales Depot - Config. for MM
Hi All, Goods Procure from Vendors outside India & This goods are being shipped to the Plants or Depot at near by places & from that depot sale is happening. This is the scenario. I like to know the Configuration Part that has to be taken care