Sales Depot - Config. for MM

Hi All,
Goods Procure from Vendors outside India & This goods are being shipped to the Plants or Depot at near by places & from that depot sale is happening. This is the scenario.
I like to know the Configuration Part that has to be taken care & the flow for this from MM.
Thanks in Advance,
Sapuser

Hi
Once you have imported to say Plant X.
you can transfer from Plant X to other plant using
1. you can use transfer posting using MB1B
A. one step movement type 301
B. two step using movement type 303, 305.
or STO's.
Pl. do the config settings under spro>MM>purchasing>setup Stock transport order
or using tcode "OMGN"".
follow the normal process of creating
a po from the receiving plant against plant X which is the supplying plant .
and then goods issue from plant x .
hope this helps
pl. award me points if usefull
in case you require more , pl. let me know
i can share some documentation on mail.
thanks
Prasanna

Similar Messages

Dump during sales order creation for a config material (uding order BOM)

Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
Yogesh

Yogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

Creation of a sales depot (plant ) in UK

Dear All
I need to create a sales depot in UK ,my company is based in India
Can you guide me in this ,Some of the areas were I need help is in
Transfer pricing ,
VAT in UK
Pricing procedure for the UK market
Thanks in advance
Anil

Hi Rajesh
We have this scenario in our company.
1.A Employee is hired using the HR module and h gets a personnel number.
2.we maintain infotype 0900 "Sales Data" for this employee here we
select his Sales Org , Sales Office , Sales Group.
3.We want to send some samples to this employee on his communication
address maintained in HR by creating a sales order in the SD module.
4.i tried various search in this site and other forums to find out how
a employee can be used as a customer but was not able to find much.
5.Request your help to tell me how to use a employee hired thru HR in
the SD module for order creation etc.Please send me documents if
available.
regards
Pravin
my email address is [email protected]

Problem in Customer and sales Area assingment for STO

Hi Gurus,
I am working on STO cycle , while config. of STO in first step when i assinged customer and sales area to plant in NODE
"Define Shipping Data for Plants" ,here i can assinged only one customer belongs to only one Sales Area.
For Eg :- 1000/10/00 is my sales area and customer is 01
I assinged this to plant SID.
Now if i want to assinge different sales area for the same customer , Because STO will not ne happened only for one Division , it will transfer goods from many division from a single plant ,So how can assinge more division or more than one sales area to a single plant.
If through COMMON DIVISION , this problem is resolved please explain ,How means step. Because i want to assinge min 10 sales area to asingle plant means may be have to create common division funada, But how I m not getting.
Please Reply ASAP.
Devdatta Joshi

Dear Joshi,
1.First you do the common divisions and distribution channels through the t.codes VOR1 and VOR2.
2. You assign common sales area to the suppliying plant which you have difined in the common divisions and distribution channels.
i.e you maintain one division and one distribution channel as reference to all other divisions and distribution channels.
3.The purpose of the assigning sales area data to suppliying plant is, we are allowing the system to sale or transferinmg the goods from that suppliying palnt.
I hope it will help you
Thanks,
Murali.

3 company codes,8 Plants,50 Slocs,19 Sales depots.

Dear All,
Please help us to design the orgn structure of our client.
1.     Our client is having 3 company codes. One has 6 plants and the second one and third company code has one plant each. Total 8 Plants. Storage locations 50.
2.     19 Depots carrying sales activities and maintaining the safety (or) Minimum level stock which is 5 days stock of the each product. Need to track stocks at Depot level.
3.     Each plant has separate finished goods storage location and will distribute the finished goods to all 19 sales depots.
Pain Area:
Whether all the 19 depots treat as storage locations and assign all the 19 storage locations to all the 8 plants.
They are having reorder point as 5 days (Replenishment) at depot level and every month first day they are considering the total stock and they are running MRP for production.
How to take care of the reorder levels?
Is it feasible?
The good number of points will be given for the best suggestion.
Thanks & Regards,
Sudhakar
00331758737035

Hi Sudhakar,
Whether all the 19 depots treat as storage locations and assign all the 19 storage locations to all the 8 plants
I did not get this question. I presume the 19 depots are best modeled as locations. What could it mean by being "assinging stoarge location". The 8 manufacturing plants have their storage locations or sub locations as they are known in APO and the 19 depots should have their own storage locations.
Now if all 19 depots and 8 plants are a single MRP area, I wonder how are supply relation ships modeled.
For running MRP I would assume each mfg plant or all 8 of them (if they are physically close by) be one MRP area and let the depots be plants. MRP can then propose where to replenish from considering all that you stated.. stocks, re-order point and such.
Hope your question was as simple as this.
Regards,
Lok

Change the sales order reason for rejection for line item

Hi,
i want to change the sales order reason for rejection for line item.
iam using bapi_salesorder_change.but i unable to change the sales order.
if possible please provide me what are the fields necessary for changing
sales order reason for rejection for line item.
Regards,
Suresh

This is the standard config to supress printing on the rejected item. Are you using standard programs or customised ?

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

Sales document report for all open documents

hi i need the code for sales document report for all open documents is sd
... can anyone help me out.
thanks in advance

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

No Daily Sales/Trend Report for today?

Has anyone received your iTunes Connect Daily Sales/Trend Report for today (1/25/10)? I have not received mine yet. First time it hasn't been up at this hour.
It usually arrives at 2:30am (it's 9:30am here now) or if it's delayed, usually in another region, there's a note in big red text on the reports page.

As I recall (back when I only had a few apps just starting in the store), yes, no daily sales means no daily report. Wait for the weekly report to confirm.

Sales Orders Blocked For Delivery

Hi,
Do we have T-Code for Sales Orders Blocked For Delivery other than VA14L,Because Customer name is not there in VA14L list.
Thanks,
NAG

Hi naga sudhir
Go to T-code--VA14L
In that go to menu-SettingsLayout--Current/Choose
In this layout u can choose fields what u want to appear in that row.
Any quries revert back to me
Regards
Srinivas.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Sales Order Confirmation when sales order goes for Credit Block

want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block
How i can Achieve this?
Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is not getting confirmed.

I am not sure, why you want schedule line to be confirmed for credit blocked sales orders. Re-confirm with the client.
There are controls when defining delivery blocks.
Goto IMG - Log.Execution-Shipping - Deliveries- Define delivery blocks( check menu path in system, may not be same as shown here).
Select 01- credit block " untick" from "Confirmation" Column.
Now test with & see how ti works.
Regards,
Reazuddin MD

Route not determing automatically at sales order level for some sales order

Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
Venkat

Hi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB

Sales Depot - Config. for MM

Similar Messages

Maybe you are looking for