Preventing a relayout after import data

On the first part of my form are buttons, user picks either button and the proper form is displayed. The first page is hidden. After that they need to import data using: xfa.host.importData(""); The system browser lets them select the XML file. When the data is merged the file rerenders and the first page is visible again. How can I fix this.

ahh,
I see the problem now. As you say, it appears that the form layout is redone after the data merge. I not sure if you can stop this. I have tried a few options for rehiding the relevant pages again, using flags, etc, but can't get that to work.
If I come up with anything I will post here.
Sorry,
Niall

Similar Messages

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Select with timestamp in the where-clause don't work after importing data

Hello,
I have to databases (I call them db1 and db2, they have the same datastructure) and exported some data from the table "rfm_meas"from db1. Later on I imported that dataset into the "rfm_meas"-table of db2. The table contains a col with the datatype "timestamp(6)" and checking the success of the import looks fine:
(executed on db2)
SELECT
id,acqtime
from
rfm_meas
WHERE
box_id=1
AND id>145029878
Returns two rows:
ID ACQTIME
145029883 01.06.10 10:30:00,000000000
145029884 01.06.10 10:50:00,000000000
It seems there are valid timestamps as I expected.
But if I now want to select all rows from box_id=1 which are newer than e.g. 25-may-2010 I would try this:
SELECT
id,acqtime
from
rfm_meas
WHERE
box_id=1
AND acqtime>=to_timestamp('25-05-2010 17:10:00,000','DD-MM-YYYY HH24:MI:SS,FF3')
And it returns ... nothing!? If I execute the same query on db1 it works correctly.
I guess db1 and db2 has different codepages!?
If I insert some rows from a PL/SQL script in db2 into the "rfm_meas"-table, querys like the one above works fine. Therefore i guess, during importing the data there must be something wrong, so I cann see the timestamp, but can't use it.
How can i fix that? Any ideas?
If someone need more details I will provide it.
Regards
Steffen

check this link out
Importing timestamp columns appears to use to_date instead of to_timestamp

RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load

Hi;
I imported Support Package SAPKW70022 but after import data load from MSSQL gives error RSM2052.
How can I solve my problem.
Best Regards.

Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK

Chinese character displaying as ???? in excel while importing data from sql-server 2000

Hi everyone,
I am facing a problem while importing sql-server 2000 data in
excelshhet .There is some chinese character in database table.
After importing data in excel chinese character looks like
????????.In sql-server this chinese character looks like square
field.
I am using UTF-8 .
This is last hope.
vijay k singh
Text

I was having the same problem with the AIRSQL i couldn't find how to rencode my csv file...
So i resave the csv in xls and then chose the utf-8 thingy and then just changed the extension back to csv.
i was always wondering why i had an xls file in my source code, which was just left there from the previous reencoding, i guess
hope it helps

Importing data from SQL Server

I'm relatively new to Oracle, and my question is about importing data. I have an SQL 2000 server and I export a database using Microsoft OLE DB provider for Oracle. The process finished OK but when I tried to query the tables qith SQL Plus Worksheet, I get a message saying:
select * from rwp_purge
ERROR at line 1:
ORA-00942: table or view does not exist
but the table is there. I can see it using DBA Studio. So, what is happening? Do I have to commit transactions after importing data from SQL Server? Do I have to rebuild statistics?
thanks in advance,
Gonzalo Pellegrini

Was the table created in the schema you are loggin as when trying to access the table? If not, you will have to grant access to the table logged in as the table owner.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Winmail.dat attachments after importing PST into online archive

Hi, we enabled the online archive feature on one of our Office365 exchange account. Later, we used the PST capture tool to import a PST file into the archive. Now after importing, the user came back saying he sees winmail.dat files as attachments. Prior
to uploading the PST to the online archive the attachments were visible normally. The PST file belongs to the same user. Its an old PST file attached to his mailbox since a long time. We then subscribed to the online archive plan for his account and used the
PST capture tool for importing the emails. To isolate the cause of the issue we tried dragging an email with an attachment from themailbox to the online archive from within Outlook. The moved email appeared correctly with attachment in his archive. We have
not tried importing the whole PST from within outlook, as the size of the PST is too large (32 GB). Could someone please help resolve the issue.
Thanks in advance.

I recommend that you post this in the Office 365 Exchange Online Forum:
http://community.office365.com/en-us/forums/158.aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Dates Under Project After Import from Iphoto

Is anybody else having this bug?
After importing my library from iphoto, the dates shown under the projects are not showing a 'to' date!
They are ok when the project is on one date, and they show the 'from' date, but never a 'to' date!
Anybody else?

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

After upgrading to Maverick mailboxes have disappeared. Even after checking library, rebuild etc. they are gone. With important data. Is there any hope?

Maverick - lost all my mailboxes (Apple Mail) with important datat. Followed advice on help menu to reindex, rebuild; called Apple Chat. No help.
Losing important data is a HUGE problem.
Also, Maverick no longer has the many folders I once had in my Home scree. These folders included other important information
carefully arranged. Are the files somewhere else? In what order? What a mess!

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

Import data in After Effects

hello,
is it possible to import data from other sources by using scripts in AE? I would like to generate a composition that uses a var "name" that would be taken in a list of names in a database or a source out of AE.
Thks,

ExtendScript does have the capability of doing file I/O. It's described in the JavaScipt Tools Guide. From the ExtendScript Editor: Help > JavaScript Tools Guide CS6.
Dan

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Preventing a relayout after import data

Similar Messages

Maybe you are looking for