Preview problem with C&EN pdf document

Hi,
I have problem with correct font view of some pdf (from web with password) in application Preview. When I have tried open file in Acrobat Reader or my iPhone it works fine. So, I have reinstalled Lion OSX again, I have checked Font Book in OSX Lion, but exclamation marks show me only duplicated fonts and only one problem with very rare font (Bauhaus 93). When I see pdf in Safari its also OK, but after saving it is "broken" (see supporting files).
Thank you.
Jan Bárta
Czech Republic

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Similar Messages

Problem with viewing Adobe PDF documents

Problem with viewing Adobe PDF documents
I have a Windows 7 Home Premium Computer
I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
Prior to downloading each version I would delete the current version using control panel programs uninstall.
After each new installation I would shut down the computer and then restart the computer.
I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
I am told after download that the version downloaded successfully.
I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
None of the above has helped.
The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon. All PDF documents show as the PDF Adobe icon.
I have tested various PDFs and none will open on this computer but they will open on other computers.
I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
Does anyone have any ideas about what is going on and how I can fix this?
Could you please answer in this forum and email me at [removed]
I am so puzzled and frustrated.

Thank you so much this did the trick.
I spent so many hours on trying to sort this out and your answer was so simple and clear.
Regards
Kazzamday

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Problem with generate a PDF document

Hi guys, i have a huge problem. i develop the basic examples from "Using Interactive Forms"
(https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d) and
always been returned the follow error:
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Severe : PDFDocument is NULL. Exception : Service call exception; nested exception is: java.net.SocketTimeoutException: Read timed out
I have installed ACF on my computer (for NW04s), Adobe Reader and Designer 7.0, SAP NetWeaver Developer Studio Version 2.0.12 Build id: 200505090134. In addition, i have the user ADSUser configurated.
I make a test of ASDUser and send me this result:
HTTP/1.1 200 OK
Connection: close
Set-Cookie: <value is hidden>
Set-Cookie: <value is hidden>
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Tue, 31 Oct 2006 20:40:12 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
     xmlns:xs="http://www.w3.org/2001/XMLSchema"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<SOAP-ENV:Body>
<rpl:rpDataResponse xmlns:rpl='urn:AdobeDocumentServicesVi'>
<rpl:Response xmlns:pns='urn:com.adobe'>
<pns:rpStrings>
<pns:RpString>
     <pns:name>TraceString</pns:name>
     <pns:value>Begin trace Required stream: "PDFDocument" not found.</pns:value>
</pns:RpString>
<pns:RpString>
     <pns:name>Error_Level</pns:name>
     <pns:value>0</pns:value>
</pns:RpString>
<pns:RpString>
     <pns:name>Results</pns:name>
     <pns:value></pns:value>
</pns:RpString>
<pns:RpString>
     <pns:name>VersionInfo</pns:name>
     <pns:value>705.20051005114147.242570</pns:value>
</pns:RpString>
</pns:rpStrings>
</rpl:Response>
</rpl:rpDataResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
it's ok?

Hi,
What do you mean with the "ADS and the J2EE are at in the same level"?
Questions:
1) I did two test with the se38 transaction (program FP_TEST_00, print preview, printer LP01 and ZLOC)..the result was a error with code 100101 and no response...this test works for webdynpro for java enviroment?
2)I check the conection with the sm59 transaction and send this result:
~response_line     HTTP/1.1 200 OK
~server_protocol     HTTP/1.1
~status_code     200
~status_reason     OK
connection     close
server     SAP J2EE Engine/7.00
set-cookie     saplb_*=(sap-dev-6_DEK_50)504285650; Version=1; Path=/
content-type     text/html;charset=ISO-8859-1
date     Thu, 02 Nov 2006 15:44:40 GMT
set-cookie     JSESSIONID=(sap-dev-6_DEK_50)ID0820220750DB00609035612061678364End; Version=1; Path=/
This is ok, i guest?
3) To make a test for ADSUser, the result not display this message (i see in a some post):
"IIOP service is running"
some relation????
Thanks.

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problems with filling out PDF forms

We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with opening of PDF in my webmail application

I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
What can I do ?

Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement?

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Preview problems with Adobe pdfs

Hi all
I hope this is in the right place ... I've checked through the forums, but couldn't find a problem like this anywhere.
I have just upgraded from a PowerMac G4 dual to a PowerMac G5 dual-core, both running the latest version of Tiger and have managed to migrate across most things. However, there is one problem I'm having which is a bit frustrating.
I use the Adobe CS2 for most of my work, but since changing machines, the Export/Save As PDF features aren't working properly. If I Export any document to pdf from InDesign, it will then not open in Preview, giving a particularly vague error: "File Error. Couldn't open the file." If I then open it up in Reader or Acrobat Pro it works, but when closing it afterwards, it asks me to Save the file (though to my knowledge I haven't made any changes). The file will then open in Preview.
A similar thing happens in Illustrator, but with a twist ... a file Saved as pdf will open straight away in Preview, but once closed won't then open again, until I go through the same process with Acrobat. Having the tested the files on other Macs, the problem is with the files, as they don't open on any machine, nor on a PC (before realising the problem, I sent a pdf to a client).
Does anyone have any ideas why this is happening? Any help will be much appreciated. Thanks in advance <d>

Hi Vipir
Thanks for the quick reply!
When making the pdfs, I didn't use any of the standards (to maximise compatibility), but I tried every available version of Acrobat (from 4 to 7) and all produced the same result. When I started, I had them Optimised, but after reading a few things online, I tried without Optimising, and then without Tagging them, but still without success.
The end result seems to be a pdf which will only open on Reader or Acrobat Pro, after being fixed by them in some way. If not opened in either of them, then they don't seem to be able to be opened by anyone (regardless of platform or program).
Maybe I've been lucky in the past, but I've never experienced any problems with pdfs before, and I just got used to pdfs being fairly 'bullet-proof!'
Thanks for your help <d>

Datamerge problems with images in pdf export

Hi
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly. Anyone shed some light on this please?
Many thanks

I have a simialar problem with the page numbers. I dont know the proper solution to this, but since I only work with a few records the following works OK for me right now.
What I do Is first set up for the data merge on the master page along with any object that have to be on every page. Until it is merged I only make the master page.
Then after it is merged I go and make any other edits to the individual pages. I dont know how to make it merge ONTO the pages you alread created.

Problem with creating/viewing PDF's from InDesign CS3

I have a problem with our PDF workflow and just cannot seem to resolve it.
The problem is as follows: My coworker and I (both designers running CS3 on iMac's running 10.5.6 Leopard) work daily on producing documents and graphic layouts.
Internally we can view and print PDF documents we create just fine with no troubles with the exception of our supervisor, who is running a mac with Tiger operating system. Our office environment is both Mac and PC. On may occasions he cannot print PDF's we create. Many times his prints will contain garbled characters, drop italics and formatting, replace fonts, or just print slowly.
This problem is also happening to our editor who is offsite. This is a fairly serious problem for her, considering her job relies heavily on being able to view and open PDF files we create. She was able to send a PDF file which shows the garbled mess her printer spit out when she printed. Apparently there were pages upon pages of messy garbled text. When documents do print from her, they are usually very slow in printing, taking up to a minute or more to print each page.
The sample of what she sent me is attached, and can also be found on my MobileMe iDisk at: http://public.me.com/rlcollier (document entitled Print Results.PDF)
My question really to the community is obviously what might be causing these problems. Its very frustrating not being able to determine if its something we're doing ourselves thats causing some incompatability or corruption in these files, or if its the users systems themselves. I can say that Debra our editor has can have a garbled mess of a 4 page file from us, and then turn around and print a graphic heavy 90 page PDF with ease from Boeing. Our PDF's seem to be the only ones she struggles with. That being said, my inclination is that its something on our end.
Any ideas of where to start looking? Any help at all would be greatly appreciated and welcomed. Thanks!

I currently had our editor test printing of some of our files using both Foxit and Adobe Reader (as was suggested) in order to see if either made a difference in her printing ability and here is what she came back with:
I tried to print out both these pdfs (David's is the one you reworked and Lisa's HESSM-3, both sent yesterday).
With Adobe: David's first page printed quickly, but it had errors (part of his pants didn't print, and there's an arbitrary shaded box in the text). Page 2 didn't print--every time I tried it had a different "offending command" code. Printing Lisa's HESSM made it up to page 7 before problems showed up (stock photo only partially printed), and it stopped on page 8 (with the random "offending command" code).
With Foxit: Both David's and the HESSM pdfs printed completely and without error...but it took a long time. David's 2 pages took about 3 to 4 minutes, and HESSM's 16 pages took close to 20 minutes. The time is in the transfer of data to the printer; the physical printing goes pretty quickly.
I cant say that I believe email is the problem, although I cant rule it out. I've tested emailing vs. passing through our workgroup with my supervisor, and it does not make any difference in his ability (or lack of ability) to print our files. He was able to print to a different printer (an HP 4650 as opposed to a 4100) without troubles. He refuses to believe its a printer problem however because PDF files originating from our office are the only ones he has trouble with. Never has he had any trouble with a single PDF file produced from any other source. This is also the case for our editor who only has trouble with PDF files originating from either mine, or my coworkers systems.
PS: I've attached both files that were referenced by our editor above for viewing/testing.

Problem opening a particular PDF document in ALL browsers

I have a problem a PDF document in all browsers.
I have a mail order account online and I am trying to open one of my statements by clicking on the PDF logo.
A new window opens and is either blank or tells me it cannot load (depending which browser used). When the new window opens the address in the browser is an IP address / name of the company / document number.PDF
I have contacted the company but they tell me to either download the latest Adobe Reader (which I have), and try a different browser (which I have).
I have tried changing settings in all browsers as per instructions found on other sites, and I can open PDF docs from other sites and my pc no problem. This tells me that the problem lies with the company, yet they cannot seem to resolve.
Does anyone have any ideas or can shed light on this puzzling problem?
So grateful, thanks.

Can you try to download that PDF to your local disk, and open it from there?

Preview problem with C&EN pdf document

Similar Messages

Maybe you are looking for