Previous month's last date
Pls help me to retrieve the previous month's last sunday
(I mean date) using some query
Thanx in advance
RAM
Thanks Vibha.
For using this FM, I have to perform 2 steps:
1) Find out any last month's date
MONTH_PLUS_DETERMINE
2) Find out the first and last date of the month
HR_JP_MONTH_BEGIN_END_DATE
I know that..but is there any FM to carry out both of the above steps. For eg. if I pass current date, then it should be able to find out last monht's first and last date...
Please let me know.
Similar Messages
-
hi,
I want a function module which could calculate the previous month's start date and end date...
Say todays date is like 29.05.2007(start date) it should return
01.04.2007 and 30.04.2007...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
sammSee the below Logic :
DATA :g_date(2) TYPE n, " Date
g_month(2) TYPE n, " Month
g_year(4) TYPE n , " Year
g_bill_low(10) TYPE n, " From date
g_bill_high(10) TYPE n, " To date
g_month1(2) TYPE n, " Month
g_year1(4) TYPE n, " Year
g_date1(2) TYPE n, " Date
g_year2(4) TYPE n, " Year
g_datum LIKE sy-datum. " System date
RANGES : r_bdate FOR vbrk-fkdat. " Billing date
g_datum = p_date + 10.
g_month = g_datum+4(2).
g_year = g_datum+0(4).
IF g_month = 1.
g_year = g_year - 1.
g_month = 12.
g_date = 1.
ELSE.
g_month = g_month - 1.
g_date = 1.
ENDIF.
Passing the date to billing date-low
CONCATENATE g_year g_month g_date INTO g_bill_low.
r_bdate-low = g_bill_low.
r_bdate-sign = 'I'.
r_bdate-option = 'BT'.
g_month1 = g_datum+4(2).
g_year1 = g_datum+0(4).
IF g_month1 = 1.
g_year1 = g_year1 - 1.
g_month1 = 12.
ELSE.
g_month1 = g_month1 - 1.
ENDIF.
CASE g_month1.
WHEN 1.g_date1 = '31'.
WHEN 3.g_date1 = '31'.
WHEN 4.g_date1 = '30'.
WHEN 5.g_date1 = '31'.
WHEN 6.g_date1 = '30'.
WHEN 7.g_date1 = '31'.
WHEN 8.g_date1 = '31'.
WHEN 9.g_date1 = '30'.
WHEN 10.g_date1 = '31'.
WHEN 11.g_date1 = '30'.
WHEN 12.g_date1 = '31'.
ENDCASE.
g_year2 = g_year1.
IF g_month1 = 2.
g_year2 = g_year2 MOD 4 .
IF g_year2 = 0.
g_date1 = 29.
ELSE.
g_date1 = 28.
ENDIF.
ENDIF.
Passing the date to billing date-high
CONCATENATE g_year1 g_month1 g_date1 INTO g_bill_high.
r_bdate-high = g_bill_high.
APPEND r_bdate.
Reward Points if it is helpful
Thanks
Seshu -
Need help with SQL retrieval for previous month till current date
Hi ,
Need help generating statistics from previous month from date of enquiry till current date of enquiry.
and have to display it according to date.
Date of enquiry : 03/02/2012
Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
sample1 20 30 40
sample 2 40 40 50
sample 3 50 30 30
Hope you guys can help me with this.
RegardsHi,
932472 wrote:
Scenario
1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
2)displaying the count of the application made based on the date.
Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
sample 1 30 40 50 44 30
sample 2 35 45 55
sample 3 36 45 55Explain how you get those results from the sample data you posted.
It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
SELECT application_type as Application_type
, COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END) AS 01012012 (should be getting dynamically)
, COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END) AS 02022012
, COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END) AS 03022012
, COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END) AS 04022012
FROM table_1
GROUP BY application_type
ORDER BY application_typeThat's the bais idea.
You can simplify it a little by factoring out the date differences:WITH got_d AS
SELECT qty
, TRUNC ( dt
- ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
, -1
) AS d
FROM table1
WHERE dt >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
, -1
AND dt < TRUNC (SYSDATE) + 1
SELECT SUM (CASE WHEN d = 1 THEN qty END) AS day_1
, SUM (CASE WHEN d = 2 THEN qty END) AS day_2
, SUM (CASE WHEN d = 62 THEN qty END) AS day_62
FROM got_d
See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases. -
How do we find first date of a month and last date of month?
is it required long caluculation or is there any simple method?
hi,
try this FM -> 'HR_JP_MONTH_BEGIN_END_DATE'
chk this also
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = sy-datum
IMPORTING
LAST_DAY_OF_MONTH = v_lastdate. <--Gives you the last day of a Month
Other FM
SG_PS_GET_LAST_DAY_OF_MONTH
HRVE_LAST_DAY_OF_MONTH
SLS_MISC_GET_LAST_DAY_OF_MONTH
rgds
anver
if hklped mark points -
Variable last date of previous month/last date of current month
Hello Experts,
I am facing an issue while designing a query.
Requirement is like this.
Report will be run on monthly basis.so on execution of report, it should prompt for month/year.
now on report there are two columns for which I have to get data on date basis(last date of previous month and Last date of current month).
Can anyone tell me is there any standard variable for this? what is it?
or how to achieve this?
Regards,
NiravHi,
See if this post in this forum can help you.
Re: Last date of a month
Regards
Shalabh Jain -
How to find first and last day of previous month?.
Based on current month, I want to find start and end day of
previous month.
For example,
For august, Start date is July 1st and End date July 31st.
How can i get first of previous month as start date and last
day of the previous month as end date?.
Same way,
i want to find start date of current month and end date of
next month.
Example:
For august,
i want to get start date, august 1st and end date : september
30.
How can i do this from current date or now().
I am looking for best and easy way to find start and end
dates..
Thanks<cfset today = now()>
<cfset firstOfThisMonth = createDate(year(today),
month(today), 1)>
<cfset lastOfNextMonth = dateAdd("d", -1, dateAdd("m", 2,
firstOfThisMonth))>
<cfoutput>
today = #today#<br>
firstOfThisMonth = #firstOfThisMonth#<br>
lastOfNextMonth = #lastOfNextMonth#<br>
</cfoutput>
Edit - To find the start and end day of previous month, get
the first of THIS month. Use Subtract 1 month ("m") to get the
start date. Subtract 1 day ("d") to get the end date. -
Printing Last Day of previous month
I need to print Last day of previous month, and the date value is relative to the system date.
In my previous post i have got the answer to print last day of current month. To print last date in previous month do i need to use RelativeDate? and I am not sure whether I can use RelativeDate for months.
RaghuRight now I have written below formula, and it works fine in all cases like if the current month equals to 01, 03, 05,07,08,10 and 12 and months other than mentioned in above including 02.
for First day of previous month
=If (FormatDate(CurrentDate();"MM"))InList("07";"08";"10";"12";"05";"01";"03") Then
(If(FormatDate(CurrentDate();"dd"))="01" Then
FormatDate(LastDayOfMonth(RelativeDate(CurrentDate();-1));"MM")"/01/"FormatNumber(Year(LastDayOfMonth(RelativeDate(CurrentDate();-1)));"####")Else
FormatDate(LastDayOfMonth(RelativeDate(CurrentDate();-31));"MM")"/01/"FormatNumber(Year(LastDayOfMonth(RelativeDate(CurrentDate();-31)));"####"))Else
FormatDate(LastDayOfMonth(RelativeDate(CurrentDate();-30));"MM")"/01/"FormatNumber(Year(LastDayOfMonth(RelativeDate(CurrentDate();-30)));"####")
For Last day of previous month
=If (FormatDate(CurrentDate();"MM"))InList("07";"08";"10";"12";"05";"03";"01") Then
(If(FormatDate(CurrentDate();"dd"))="01" Then LastDayOfMonth(RelativeDate(CurrentDate();-1))Else
LastDayOfMonth(RelativeDate(CurrentDate();-31)))Else LastDayOfMonth(RelativeDate(CurrentDate();-30))
Please let me know any other suggestions.
-Raghu -
How to get Last Day of a Previous Month
Hi all,
I need to get Last Day of the Previous Month. I am able to get Current Month Last Day using Calendar.getActualMaximum(Calendar.DATE)
But I need previous Month's Last Day.
Thanks
Vamshi.Thanks all....
I have been trying the same and could get it.....
here is the code for that....
SimpleDateFormat simpleDate = new SimpleDateFormat("MM/dd/yyyy");
Calendar calendar = Calendar.getInstance();
month = calendar.get(Calendar.MONTH);
//year = calendar.get(Calendar.YEAR);
calendar.set(Calendar.MONTH, month-1);
calendar.set(Calendar.DATE, calendar.getActualMaximum(Calendar.DATE));
//lastDayOfMonth = calendar.getActualMaximum(Calendar.DATE);
System.out.Println("Previous Month End Date is :: " + simpleDate.format(calendar.getTime()));
this works....
thanks for ur replys.... -
In urgent need of help regarding getting month name and dates
Hi Experts
I have a table called MONTHLYBILL with Column TRANSACTIONMONTH. I need one query / function / SP to do return ouput based on following combination. I am using Oracle 9i
Have researched on various forums, documents but unable to get the desired output. Finally here in hope of help.
Input
From Date: 06/01/2011
To Date: 12/03/2011
Output
Month: DECEMBER-2010 (previous month of From Date). Now if DECEMBER-2010 is not available in table, then returns the
month which is available immediately the month preceeding DECEMBER-2010
Begin Date: 01/01/2011 (1st day following the month returned in output)
End Date: 31/03/2011 (last date of month based on input To Date)
Input
From Date: Null
To Date: 12/03/2011
Output
Month: First available transactionmonth in DB (say JANUARY-2010)
Begin Date: 01/02/2011 (1st day following the month returned in output)
End Date: 31/03/2011 (last date of month based on input To Date)
Input
From Date: Null
To Date: Null
Output
Month: First available transactionmonth in DB (say JANUARY-2010)
Begin Date: 01/02/2011 (1st day following the month returned in output)
End Date: Current month's last dateWhat is your application release?
I am in big trouble now.. can anyone help....
I have a backup of an EBS instance, lets say it was taken one month ago, and now we got some datas lost in the current production server..
some one deleted some datas...
Now we need some specific data from the old backup and restore it to the production
or can it be restored? please help me guys...What kind of data? What is the table name?
Since this is a production issue, I would suggest you log a SR.
Thanks,
Hussein -
Compare turnover actual month with previous month on monthly based report
Hello Gurus,
please help me with the following requirment:
In have a monthly based report with key figure 'turnover'. Now I want to calculate deviation turnover actual month vs turnover previous month from last year. How to handle this?
Example:
CalYear/Month
01.2010 02.2010 03.2010 04.2010
Turnover 10 20 15 20
Calculated xxxx xxxx xxxx xxx
Thank you very much!
MuammerHello voodi,
it doesn't work. With offset function it shows the turnover only in the columns from last year. I need the turnover from last year in the columns from this year. Any ideas?
Expected:
CalYear/Month
01.2010 02.2010 03.2010 04.2010
Turnover 10 20 15 20
Turnover last year xxxxx xxxxx xxxxxx xxxxx
With offset -12
CalYear/Month
01.2009 02.2010 ... 01.2010 02.2010 03.2010 04.2010
Turnover 20 50 .... 10 20 15 20
Turnover last year 20 50 ... blank blank blank blank
Thank you!
Muammer -
Getting data in a query on last date of all previous months
Dear Experts,
I need your help with a query.
I am trying to create a query which when run should pick the number of Open Sales Order on the last date of all the previous months from the start of company.
I could create the query for fetching the required data on last day of the previous month, say today is 25th June 2014, so my query only fetches data for May 31st 2014 but I need data for all previous month, May 31st 2014, April 30th 2014, March 31st 2014 & so on.
Please advise how to achieve this is SQL query.
Thanks & regards,
NitinHi,
Try this:
Select *
from(
SELECT T0.[DocNum] as #,t0.cardcode as C, t0.docdate
FROM ORDR T0
WHERE T0.[DocStatus] = 'o' and T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-1,0)),10) OR T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-2,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-3,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-4,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-5,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-6,0)),10) or T0.[DocDate] = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-7,0)),10)
group by t0.cardcode,docdate,T0.[DocNum]) S
pivot
(count(#) for c in([cvt01],[cvt02],[cvt03],[cvt04],[cvt05],[cvt06],[cvt07],[cvt08],[cvt12])) P
Note: Replace Cvt01,02...with your customer code.
Thanks & Regards,
Nagarajan -
Last day of previous month for data load
Hi,
I have to load data from the previous month into the psa and then into an infocube. I was wondering as to how to get the last of the previous month to write a code in ABAP. I will be writing the code at the infopackage level in the data selection. I could load data from the 1st of the previous month to the 1st of the current month. This will be an additional load of 30,000 records for the 1st of every month, since I will be loading 30,000 records everyday, I was wondering if I could limit the load from the 1st of every previous month to the last day of that month. This will be a repetitive loading.
DATA: CURR_MM(2) TYPE N,
CURR_YYYY(4) TYPE N,
CURR_DD(2) TYPE N,
PREV_MM(2) TYPE N,
PREV_YYYY(4) TYPE N,
PREV_DD(2) TYPE N,
YYYY_MM(6),
YYYY_MM1(6),
DATE LIKE SY-DATUM.
DATE = SY-DATUM.
CURR_YYYY = DATE+0(4).
CURR_MM = DATE+4(2).
CURR_DD = DATE+6(2).
PREV_DD = 1.
IF CURR_MM = '01'.
PREV_MM = '12'.
PREV_YYYY = CURR_YYYY - 1.
ELSE.
PREV_MM = CURR_MM - 1.
PREV_YYYY = CURR_YYYY.
ENDIF.
concatenate PREV_YYYY PREV_MM PREV_DD into YYYY_MM.
concatenate CURR_YYYY PREV_MM PREV_DD into YYYY_MM1.
read table l_t_range with key
fieldname = 'BLDAT'.
l_idx = sy-tabix.
l_t_range-low = YYYY_MM.
l_t_range-high = YYYY_MM1.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
modify l_t_range index l_idx.
p_subrc = 0.
Mind you this code will load data from 1st of the previous month to the 1st of current month. I just don't want to load that extra "1st day" of current month data as I have 30,000 records everyday.
Say for example, I want to load data from 1st Mar to 31st Mar or 1st Feb to 28thFeb. How should I modify the above code.
Is there a formula to get the last date of the previous month. That's all I need. This would solve the problem.try this routine. it will return a range from 1st day to end of the month.
DATA: l_s_range TYPE rsr_s_rangesid,
E_T_RANGE TYPE RSR_T_RANGESID.
DATA: year(4) TYPE n,
month(2) TYPE n,
day(2) TYPE n,
ld_keydate TYPE sydatum,
ld_lastday TYPE sydatum.
REFRESH e_t_range.
CLEAR l_s_range.
year = sy-datum(4).
month = sy-datum+4(2).
*Months with 31 days in year
IF month = '01' OR
month = '03' OR
month = '05' OR
month = '07' OR
month = '08' OR
month = '10' OR
month ='12'.
day = '31'.
ENDIF.
*check for leap year: provoking sy-sybrc <> 0
IF month = '02'.
day = '29'.
MOVE: '02' TO ld_keydate+4(2),
year TO ld_keydate(4),
day TO ld_keydate+6(2).
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
date = ld_keydate
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
day = '28'.
ENDIF.
ENDIF.
*months with 31 days in year
IF month = '04' OR
month = '06' OR
month = '09' OR
month = '11'.
day = '30'.
ENDIF.
MOVE: year TO ld_lastday(4),
month TO ld_lastday+4(2),
day TO ld_lastday+6(2).
l_s_range-low = sy-datum.
l_s_range-high = ld_lastday.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
APPEND l_s_range TO e_t_range. -
Show data of last day of previous month against any day of current month
Hi,
I have fact table which contains data at date level (we have data for oct-2009 to april-2010). Our requirement is to show data of last day of previous month against any day of current month in obiee 11g. I am facing problem in Feb 2010 its picking data of 28-Jan-2010 instead of 31-jan-2010 and for April its picking data of 30-mar-2010 instead of 31-mar -2010.
Any suggestion ???You're asking to filter your data set to only include rows between:
1) last day of the previous month
2) any day of the current month
This can be achieved with prompting in OBIEE Answers.
last day of previous month = TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) . The problem is you need to make query work within Oracle's Answer syntax.
In the prompt, select the operator type for your date dimension as 'between' and default to 'SQL Results'.
For the 'last day of previous month' , use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
For the current date, use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else CURRENT_DATE
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
Another option is to create a last_date_pervious_month variable in the RPD and have that as the default value in your prompt. -
How to get first and last date of previous month
To set default values in selection screen,I want first and last date of the previous month.
Also I want the first and last dates of previous quarter.
The quarters can be only january to march, apr to june, jul to sept, oct to dec.
I want to run a program on beginning of each month by job scheduling having <b>selection screens</b> for the above monthly and quarterly dates.Hi Suhas,
Use the below code.
DATA: v_date LIKE sy-datum.
DATA: v_month_begin_date TYPE sy-datum,
v_month_end_date TYPE sy-datum,
v_month(2) TYPE n,
v_month1(2) TYPE n,
v_quarter TYPE i,
v_year(4) TYPE n,
v_quarter_begda TYPE sy-datum,
v_quarter_endda TYPE sy-datum.
v_month = sy-datum+4(2).
IF v_month = '01'.
v_month = '12'.
v_year = sy-datum+0(4) - 1.
ELSE.
v_month = v_month - 1.
v_year = sy-datum+0(4).
ENDIF.
CONCATENATE v_year v_month '01' INTO v_date.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
EXPORTING
iv_date = v_date
IMPORTING
ev_month_begin_date = v_month_begin_date
ev_month_end_date = v_month_end_date.
v_month1 = sy-datum+4(2).
IF v_month1 = '01' OR
v_month1 = '02' OR
v_month1 = '03'.
v_quarter = 1.
ELSEIF v_month1 = '04' OR
v_month1 = '05' OR
v_month1 = '06'.
v_quarter = 2.
ELSEIF v_month1 = '07' OR
v_month1 = '08' OR
v_month1 = '09'.
v_quarter = 3.
ELSEIF v_month1 = '10' OR
v_month1 = '11' OR
v_month1 = '12'.
v_quarter = 4.
ENDIF.
IF v_quarter = 1.
v_quarter = 4.
v_year = sy-datum+0(4) - 1.
ELSE.
v_quarter = v_quarter - 1.
v_year = sy-datum+0(4).
ENDIF.
CALL FUNCTION 'HR_99S_GET_DATES_QUARTER'
EXPORTING
im_quarter = v_quarter
im_year = v_year
IMPORTING
ex_begda = v_quarter_begda
ex_endda = v_quarter_endda.
WRITE:/5 'previous month begin date : ', v_month_begin_date.
WRITE:/5 'previous month end date : ', v_month_end_date.
WRITE:/5 'previous quarter begin date : ', v_quarter_begda.
WRITE:/5 'previous quarter end date : ', v_quarter_endda.
Message was edited by:
Velangini Showry Maria Kumar Bandanadham -
Getting last date of the previous month
Hi
Am giving one date. FOr that day i hav to take previous month last date.
How can i do. IMportant : Last date of previous monthu can make the code work like this.
data: date like sy-datum,
date1 like sy-datum.
date = sy-datum.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
day_in = date
IMPORTING
LAST_DAY_OF_MONTH = date1
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
add 1 to date1.
write:/ 'next month start date:', date1.
*to fetch the march month last date.
date1+4(2) = 03.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
day_in = date1
IMPORTING
LAST_DAY_OF_MONTH = date1
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
write:/ 'last date of march:', date1.
Please close your previous threads.
Maybe you are looking for
-
Setting refresh rate with DisplayMode
I'm having a problems setting the refresh rate of the DisplayMode, originally I used this method to create a display mode: DisplayMode(320, 240, 16, DisplayMode.REFRESH_RATE_UNKNOWN);This worked fine and ran my game at the above resolution, however I
-
Hi, I just switched over to premiere CC and have been having trouble with the program monitor freezing up. I am editing R3D files 5k and therefore have the playback quality set to 1/8. But every time I'm trying to scale up the picture, the monitor fr
-
How to suppress the system status of an Equipment from display ?
Hi, I am working with transaction IE02 and IE03 and would like to surpress the display of the system status on the transaction. I have checked config for screen groups and screen fields and have not been able to find a solution. any ideas are greatly
-
i am trying to update my ibook 10.4.11so i tryed leopard but it said i needed 10.5 anyone know where i can get this from or anyother ideas please help
-
De-noise edit mode not saving.
My photos do not seem to be saving in their edited form. The de-noise and touch up changes appear while in the editing mode but not in the normal library while other changes do. What's up?