Pricing for the Enterprise product

I read the article about the Sun Java System Enterprise and they state that Sun Announced this:
* New releases of the Java Enterprise System will be made available on a regular, quarterly schedule.
* There will be a single, per-employee, per-year subscription price for the package (rather than a separate license fee for each package component). The price is a low $100 per employee per year.
* Consulting, training, and support services will be provided as part of the subscription.
Also later in the article they mentioned Sun Java Studio Enterprise being integrated and they then said this:
* It's fully integrated and tested.
* It's installable as a single package.
* It will be released on a regular schedule.
* It's based on a single, per-employee, per-year subscription price. In fact, it adds only $5 to the per-employee, per-year subscription price when ordered with the Java Enterprise System.
* It offers a variety of support services as part of the subscription.
So according to this per employee subscription we could get the Sun Java Studio Enterprise for $105.00 per employee. Is this correct information they have?
The reason I ask is that I am the owner of Sun 1 Studio Standard and they have this upgrade for the Sun Java Studio Enterprise at $995.00. But according to the article you can get this for the subscription of $105.00 per employee. Can someone verify this per subscription stuff and let me know what this includes etc.. I own a small development company and we have 5 Java developers on staff (would like more) and we normaly use Netbeans and Sun 1 Studio for the ejb work because we recommend the Sun App server products to our clients. Now the subscription prices would greatly effect the price it would take to license 5 versions. I hope the article was correct and if it is I would need to get some information also on who to contact about the purchase of the subscriptions.

Ok understand but I have some comments on this. Let's take the min. for the example.
Let's say a company has the 100 employees and they have developers working on projects. According what was in the announcements this company could get licenses for JavaES and Java Studio Enterprise for $10,500.00. I'm not sure if this gives all their developers the right to use Java Studio Enterprise or not. I would assume yes. So let's say they had the same number of developers as I do on Java projects, 5. Since I am just a very very small company, making much much less for sure than this 100 employee company, I end up paying almost the same amount of money for 5 licenses of Java Studio Enterprise as this company with 100 employees. What is wrong with this picture. I do understand that Sun is trying to push their products into the larger businesses and this is the reason for this subscription but it does not help the small guys out there. Now imagine that this 100 employee company had 10 developers. They would get all 10 licenses for the same price and I would have to spend almost twice the amount that this company spends for teir licenses. Also, we are a outsourcing company that have clients in the US that do not have a clue to what a App server or Dirctory server is and do not have a clue what to use. We could push other products like .Net or WebSphere or Oracle but we push Sun. We have not had the chance yet to do development with the other Sun Servers like Identity or Directory servers but one day we might have this requirement or if we had the products to work with and learn from we could push these also for projects that could use this technology. So what bonuses do we get for this? None, actually just the opposite. Larger corporations win again. For a small company like mine to spend $1000.00 for some software is a nice chunck of change never the less $10,000.00. But our clients do have the money and this is what counts. I'm not sure if Sun has any programs for this type of company but it sure would be nice to be able to get the type of cost savings that this 100 employee company gets for us small guys.

Similar Messages

Ask the Expert: Cisco TelePresence for the Enterprise

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Telepresence® for the enterprise.
Cisco experts Jaret, Fernando, and Fred will be covering all Cisco TelePresence products. Topics include Cisco TelePresence endpoints and TelePresence infrastructure such as the Cisco TelePresence Video Communication Server (VCS), Cisco Expressway Series, Cisco Unified Communication Manager (CallManager), Cisco TelePresence Servers (MSE 8710, on Virtual Machine, etc.), MCU (MSE 8510, etc.), Cisco TelePresence Management Suite (TMS), and all other Cisco TelePresence related devices.
Jaret Osborne is an 8-year Cisco Advanced Services veteran. In his Advanced Services tour, Jaret has covered all aspects of Cisco Unified Communications and TelePresence products, including both enterprise and service provider verticals. Most recently Jaret has been working with global service providers supporting their Cisco TelePresence as a Service offerings while also incubating new cloud services at Cisco.
Fernando Rivas is a Cisco Advanced Services NCE, starting in the Cisco Technical Assistance Center (TAC), 2007, on the Collaboration Technology Team mastering the Cisco Unified Communication technologies and specialized in call control CUCM,VCS) and conferencing (MeetingPlace, Telepresence). In 2011, he joined Cisco Advanced Services as a member of the Cisco Collaboration team and participated in several Cisco TelePresence and video-related technologies deployments. Currently he is a member of the Video Cloud Technology Team, supporting video exchanges in several and architecting new private video cloud solutions for large enterprises. Fernando holds a routing and switching CCIE® certification (22975).
Fred Mollenkopf is a Cisco Advanced Services Network consulting engineer working at Cisco for the last 7 years. Fred has led some of the largest Cisco Unified Communication and Collaboration deployments done for Cisco customers and partners. Over 15 years’ experience in data networking with a specialization in Cisco Unified Communications in 2004. Currently he is a member of the SP Video Advanced Services Team, supporting SP video exchanges and the Cisco Telepresence solutions. Fred maintains an active CCIE® in Voice (17521).
Remember to use the rating system to let Jaret, Fernando, and Fred know if you have received an adequate response.
Because of the volume expected during this event, Jaret, Fred, and Fernando might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video Community, under the sub-community TelePresence, shortly after the event. This event lasts through August 15, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Tenaro,
Additionally here are the most common login issues. Unfortunately this includes items related to Presence implementation but I commented where we did not use these in our lab setup for CUCM Phone Capabilities only.
Login Issues
Problem:
Jabber Unable to Sign-in Through MRA
Solution
This can be caused by a number of things, a few of which are outlined below.
1. Collaboration Edge SRV record not created and/or port 8443 unreachable
For a jabber client to be able to login successfully using MRA, a specific collaboration edge SRV record must be created and accessible externally. When a jabber client is initially started it will make server DNS SRV queries:
_cisco-uds : this SRV record is used to determine if a CUCM server is available.
_cuplogin : this SRV record is used to determine if an IM&P server is available.
_collab-edge : this SRV record is used to determine if MRA is available.
If the jabber client is started and does not receive an SRV answer for _cisco-uds and _cuplogin, and does receive an answer for _collab-edge then it will use this answer to try to contact the Expressway-E listed in the SRV answer.
The _collab-edge SRV record should point to the FQDN of the Expressway-E using port 8443. If the _collab-edge SRV is not created, or is not externally available, or if it is available, but port 8443 is not reachable, then the jabber client will fail to login.
2.  Unacceptable or No Available Certificate on VCS Expressway
After the jabber client has received an answer for _collab-edge, it will then contact the expressway using TLS over port 8443 to try to retrieve the certificate from the expressway to setup TLS for communication between the jabber client and the expressway.
If the Expressway does not have a valid signed certificate that contains either the FQDN or domain of the Expressway, then this will fail and the jabber client will fail to login.
If this is occurring, the you should use the CSR tool on the Expressway, which will automatically include the FQDN of the expressway as a Subject Alternative Name.
MRA requires secure communication between the Expressway-C and Expressway-E, and between the Expressway-E and external endpoints.
Expressway-C Server Certificate Requirements:
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation. The Expressway-C should automatically include these in the CSR provided that an IM&P server has already been discovered on the Expressway-C.
The names in FQDN format of all Phone Security Profiles in CUCM configured for TLS and used on devices configured for MRA. This allows for secure communication between the CUCM and Expressway-C for the devices using those Phone Security Profiles.
Expressway-E Server Certificate Requirements:
All domains configured for Unified Communications. This includes the domain of the Expressway-E and C, e-mail address domain configured for Jabber, and any presence domains.
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation.
The MRA Deployment guide describes this in greater detail on pages 17-18. (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Ac...
Note: In our lab for testing Phone Capabilities only, we did not include the Chat Node Aliases in the certificate as we were not using IM&P.
3.  No UDS Servers Found in Edge Config
After the Jabber client successfully establishes a secure connection with the Expressway-E, it will ask for its edge config. This edge config will contain the SRV records for _cuplogin and _cisco-uds. If these SRV records are not returned in the edge config, then the jabber client will not be able to proceed with trying to login.
To fix this, make sure that _cisco-uds and _cuplogin SRV records are created internally and resolvable by the Expressway-C
More information on the DNS SRV records can be found on page 10 of the MRA deployment guide for X8.1.1 (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-1-1.pdf)
Note: In our lab for testing Phone Capabilities only, we did not include the DNS SRV for _cuplogin.
4.  The Expressway-C logs will indicate the following error: XCP_JABBERD Detail="Unable to connect to host '%IP%', port 7400:(111) Connection refused"
If Expressway-E NIC is incorrectly configured, this can cause the XCP server to not be updated. If the Expressway-E meets the following criteria, then you will likely have this issue:
Using a single NIC
Advanced Networking Option Key is installed
Use Dual Network Interfaces option is set to “Yes”
To correct this problem, change the “Use Dual Network Interfaces” option to “No”
The reason this is a problem is because the Expressway-E will be listening for the XCP session on the wrong network interface, which will cause the connection to fail/timeout. The Expressway-E listens on TCP port 7400 for the XCP session. You can verify this by using the netstat command from the VCS as root.
Note: We used a Dual Network Interface Expressway for testing but were not using XCP, so this was not applicable to us.
5.  VCE-E Server hostname/domain name does not match what is configured in the _collab-edge SRV.
If the Expressway-E Server hostname/domain name does not match what was received in the _collab-edge SRV answer, the jabber client will not be able to communicate to the Expressway-E. The Jabber client uses the xmppEdgeServer/Address element in the get_edge_config response to establish the XMPP connection to the Expressway-E.
This is an example of what the xmppEdgeServer/Address would look like in the get_edge_config response from the Expressway-E to the Jabber client:
<xmppEdgeServer>
<server>
<address>ott-vcse1.vcx.cisco.com</address>
<tlsPort>5222</tlsPort>
</server>
</xmppEdgeServer>
To avoid this, make sure that the _collab-edge SRV record matches the Expressway-E hostname/domain name. Enhancement CSCuo83458 has been filed for this.
Note: This was one of our issues when we first setup. We adjusted our Expressway-E to insure the below:
System > Administration > System Name this was the FQDN
System > DNS > System Host Name was the host portion of the FQDN
System > DNS > Domain Name was the domain portion of the FQDN
System > Clustering > Cluster Name (FQDN for Provisioning) was the FQDN
6. Unable to log into certain IM&P servers. VCS logs say "No realm found for host cups-example.domain.com, check connect auth configuration"
From the Expressway-E, go to Configuration -> Unified Communications -> IM&P Servers. Open each server and click "Save" again. Not sure exactly why this happens.
Note: This was N/A to our test and can be ignored with Phone Capabilities only.
Thanks
Fred

As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgra

I RECIVED AN EMAIL FROM ADOBE AS : As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgrade order" IS THIS UPGRADE FREE AND WHAT SHOULD I DO, HOW CAN I HAVE THIS UPGRADE?

Compare with on-line stores. The full version is often cheaper than Adobe's upgrade price.
See this example from Amazon, but check pricing in your own region.
http://www.amazon.com/gp/product/B00N4OLCRO/ref=s9_simh_gw_p65_d4_i2?pf_rd_m=ATVPDKIKX0DER &pf_rd_s=desktop-1&pf_rd_r=0F1GED9546928YP3PHC0&pf_rd_t=36701&pf_rd_p=1970559082&pf_rd_i=d esktop

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

Buying in the Mac App Store for the enterprise

We're looking to buy an app in the Mac App Store (iBarcoder) for our graphic designers using Macs, and after read this article on Macworld.com, we're not too sure how to go about it.
Does that mean I could buy one copy of an app and install it on every Mac in my business?
No, the license you agree to when you enter the Mac App Store says that app downloads are for Macs that you personally own, and that's a license for personal use. Apps that are intended for professional use are licensed for you or for a single computer used by several people. While there's no technical impediment to you installing them on multiple Macs at work, you'll be violating the license agreement. It's the same scenario as if you buy a single-user copy of iWork and install it on ten Macs at work—you can do it, but you're violating the license agreement, making the act ethically questionable.
We know about the volume licensing that Apple offers, but it seems as though it's only for education and not for the enterprise. Surely creating a new Apple ID for every Mac isn't the best way to do this, right?
Thanks!

Ask Apple;
http://www.apple.com/business/vpp/

Which licenses do I need for the Enterprise Portal from Dynamics AX R2 2012

Dear Community,
some time ago i heard about the Enterprise Portal, which requires a SharePoint 2013 and a Dynamics AX R2 2012 Server.
My company has a fully licensed SharePoint 2013 Enterprise Server and enough CALs. We also have a Dynamics AX 2009 Server running.
Now to my question: What licenses are needed to get a Enterprise Portal with Dynamics AX 2012?
Thanks for your responses.
Sincerely ShareBear9280

Hi ShareBear,
According to your description, my understanding is that you want to know which licenses needed for the Enterprise Portal from Dynamics AX 2012 R2.
There are 4 types of user CALs in Dynamics AX 2012 R2 - Enterprise, Functional, Task, and Self Serve. The number of CALs needed is related to who these users are and what they do.
More information, please refer to the link:
http://community.dynamics.com/ax/f/33/t/114710.aspx
For this issue, I recommend you can post your question to the forum for Microsoft Dynamics AX:
http://community.dynamics.com/ax/f/33.aspx .More experts will assist you, then you will get more information relation to Microsoft Dynamics AX.
Thank you for your understanding and support.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Developed a report for the daily production done.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report for the daily production done.
thanks in advance,
radhakrishna

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

How to find BADI for the enterprise service?

Hi Experts,
We are enhancing an enterprise service for Businesspartner creation by adding an additional field in the structure. But we are not able to find out the correct BADI for the enterprise service. We are using the following enterprise service - 'BusinessPartnerERPCreateRequestConfirmation_In' . I could not find any BADI in ES workplace also .How to search for a BADI for this ES.
Any help on this will be well appreciated.
Thanks in advance
Sanu

Hi Sanu.
Not all the services is an BAPI or BAPI, maybe this is an interface.
To see the related object go to esworkplace and find the service.
You will find in the page the label "Related Web Service Definition".
Copy the related value(in your case ECC_BusinessPartnerCrtRC) it and go to SAP GUI. In transaction SE84, go to enterprise service and choice service definition.
Paste the value copied in esworkplace in field Service Definition, then F8.
In the next screen double click in the returned value.
In the next screen you will see a Reference Object field. Double click in the value and you will see the related object.
In this case is an interface. You can see in Provider Class.
Hope that's help you.
Marcos

For some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

for some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

Preference status not changed for the processed products

Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
Rahul

Hello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel.

I want to buy Production Premium CS6, but I already own Flash Professional. Is there a way I can avoid paying for the same product twice?

I have a feeling I already know the answer to this question, but I figured it was worth asking anyway.
Just under a year ago, I purchased Flash Professional CS6 for school. Now that I am expanding my practices, I am interested in purchasing the Production Premium bundle of programs. However, it already comes with Flash CS6, and if I can avoid paying for the same product twice, I'd like to do so.
Is it possible for me to either get some kind of discount on the suite since I already own one of the programs?

I have a feeling I already know the answer to this question, but I figured it was worth asking anyway.
Just under a year ago, I purchased Flash Professional CS6 for school. Now that I am expanding my practices, I am interested in purchasing the Production Premium bundle of programs. However, it already comes with Flash CS6, and if I can avoid paying for the same product twice, I'd like to do so.
Is it possible for me to either get some kind of discount on the suite since I already own one of the programs?

Credit card has been charged twice for the same product ( Home Design)

Dear Sir ,
upon reviewing my credit card statement , I have noticed that i have been charged twice for the same product which I am not even aware of , however I would apprcaite reviewing the cahrges and do the refund to my credit card
The DUPLICATE charges are against Home design : 49.99 USD
and another one for an application which is not downloaded ( The last driver )
Thank you and very best regards
Riad
Message was edited by: zahra1966

These are user-to-user forums, you are not talking to Apple here.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Releasing the Standard price for the co product.

Hi All,
In my scenario , we have configure co product config and is that i have made the respective settings for the co - product in the material master with the joint production and the apportionment structure defined in the suitable ratio.. The cost estimate has been executed and the cost apportionment are resulted as per defined and it is perfect...
But when i tried to release the standard price using CK24, the price of the main product (FERT) is getting updated in the material master whereas the price of the co- product (FERT) is not updating in the material master. Is any settings has to be made from controlling aspect or settings in material master...
regards,
Mahesh

Hi Mahesh,
If you want to mark and release the non-leading co-product, you
need to create a cost estimate for it seperately. Then goto CK24,
the marking will be OK.
Regards,declan

I just order the wrong product 10 min ago i want to cancel my subscription and get refunded for the wrong product that was chosen. How do i cancel this product before i'm charged???

I just order the wrong product 10 min ago i want to cancel my subscription and get refunded for the wrong product that was chosen. How do i cancel this product before i'm charged???

Not sure if you can cancel before you're charged (Maybe?) but here is where you cancel. Cancel your membership or subscription | Acrobat, Acrobat.com online services

How to create an alternative bom for the same product

Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shi

HI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok

Pricing for the Enterprise product

Similar Messages

Maybe you are looking for