Pricing procedure not to bill customer but revenue recognition

I'm looking for guidance on how to setup a pricing procedure conditions.   First let me explain the situation.  What happens is the customer buys say 2000 software licenses on a sales order. The customer is billed and the customer account is debited and a deferred account is credited. Now the customer activates one of the licenses. The pricing from the sales order is copied to a contract. This contract has a start and end date for the license. Now that license can start to be recognized based on the period of the line item contract dates.. The issue we have is that normally for deferred revenue billing takes places. Problem is customer was already billing on the sales order. Somehow the pricing procure has to credit the deferred account that was posted on the sales order and then credit the revenue recognition account that can be used by transaction VF44.
So on the invoice associated with the sales order Invoice  from sales order
Dr Customer $1000
Cr 2370 $1000
The account 2370 is the deferred account. This part is fine.  
Now we activate 1 of the licenses.
So the pricing procedure has to do the following with no billing to the custo0mer account Invoice from contract
Dr 2370 $120
Cr 2371 $120
This is the problem part. crediting the deferred account 2370 and then posting into the revenue recognition account 2371
Rev Rec – VF44 for Period1
Dr 2371 $10 Cr 4340 $10 Any ideas would be appreciated

Hi
In SD billing documents customer is always debited or credited based on nature of transaction. For posting in two different G/Ls instead of customer account there is only one possible way which I know. In free goods pricing system can post debit and credit entries to different G/Ls and these G/Ls are controlled through account keys which you assign to condition types in pricing procedure.
Do you have any Idea of free goods pricing and its posting? Explore this and give it a try. I am not sure about this because I didn't test this. You can test and see if it helps.
In this for contract item category you have to use free goods pricing which you set in item category settings in VOV7.
Thank$

Similar Messages

  • Pricing procedure not getting determined in sales order

    Hi All
    I have did all the configuration settings for determining  the pricing procedure in the sales order,but it is not getting in the order.
    The assignment  sales area + customer pricing procedure + document pricing procedure are fine
    And in the customer master the customer pricing procedure is maintained properly
    And in document type TA,the document pricing procedure is maintained properly.
    Without IPC is it not possible to get the prcing procedure of CRM in to the sales transaction.
    I dont have IPC installed on my system.
    Appreciate ur help
    Regards
    Sreekar M

    Thanks Shalini for the information
    Then i think i cant create a billing document in CRM with reference to sales order...as the sales order is incomplete
    Is creation of delivery possible in CRM?
    Regards
    Sreekar M

  • Pricing procedure not determind

    Hi Gurus,
    I was creating a Sales order but i cannont save the sales order and getting a error message as
    Pricing procedure not determined.
    Please help.
    Thanks,
    Dardo

    Hi Dardo
    Check in OVAZ wheather the sales document type is assigned to the sales area or not . But , after creation of sales order if you are getting this error Pricing procedure not determined. then  go to OVKK and maintain the data sales area + Cupp + Dupp =Pricing procedure and then check, if you are still getting error then maintain sales area + Cupp + - = Pricing procedure
    Regards
    Srinath

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • Spot to assign a new pricing procedure to a billing document

    Hello Guru's,
    I have to assign a New Pricing procedure to a Billing document,  where should i assign it in the IMG settings will anyone tell me the spot / navigation.  It will be of great help.

    hi PV
    goto IMG>SALES AND DISTRIBUTION>BASIC FUNCTIONS>PRICING>PRICING PROCEDURE
    HERE U EXPLORE THE OPTIONS
    TRY IN OVKK TCODE
    REGARDS

  • Pricing Procedure for Zero rated customer

    Hi Experts,
    Good day, We have an urgent issue in which the my client is selling taxable goods, but certain customers are so called "zero rated" in which no tax should be applied to them even if the material is taxable.
    Gross price (with tax) will be the price of the goods and the system should automatically deduct from here the tax. Would it be possible to make a pricing procedure with tax but no accounting document would be created for that tax amount? I tried to make it statistical but it does not compute the price net of vat  amount (gross less tax).
    Sample
    Gross Price with Tax
    1000
    Tax
    107.14
    Price Net of VAT
    892.86
    Discount (1% of Price Net of VAT)
    8.93
    Net Price
    883.93
    Accounting Entry:
    Debit Accounts Receivable
    883.93
    Debit Discount
    8.93
    Credit Sales
    892.86
    Kindly assist me in finding the right pricing procedure.
    Regards,
    Beloved One

    Debit Accounts Receivable
    883.93
    Debit Discount
    8.93
    Credit Sales
    892.86
    Why two debits??
    Normally at the time of invoice--
    Customer Account Dr
    Sales Revenue Cr
    VAT/CST Account Cr
    Cenvat Suspense Account Cr(If these goods are excisable)
    Phanikumar

  • Pricing procedure not determined

    HI 
    When i tried to create sales order with sales area lg11/lg/lg.I am getting the error that pricing procedure is not determined,because no entry with keys lg11/lg/lg  'a'  'v' exists in table 683v.
    I am not able to move further. Can u pls help me.
    Thanks&Regards
    Prasad.G

    Hi,
    This is nothing but the problem in pricing determination.
    Go to OVKK.
    And maintain the required entries for your sales organisation, distribution channel, division, customer pricing procedure , document pricing procedure and the required pricing procedure that you want to get triggered when once enter this sales area with the other combinations.
    Customer pricing procedure comes from customer master data .(sales area data sales tab) and document pricing procedure comes fromthe controls of order document(VOV8)
    Mohan
    Award points if it adds information.

  • Invoice pricing procedure not using alt calc type from the pricing procedur

    The sales order has the same pricing procedure as the invoice but when the invoice is created it is not using the alt calc type that is on the pricing procured like it is on the sales order.  This is causing one of the condition types to have different values on the sales order vs. invoice.
    I am not sure what other areas to check to see why this is happening.  Any thoughts?

    I have checked and in the copy controls for Delv type = LF  and target Bill type = F2  the Pricing Type = G (copy pricing elements unchanged and redetermine taxes).   Condition types such as ZPR2 where there is condition record copy in correctly to the invoice.   It is condition type ZZIF where it is determined from a routine, not a condition record, where I am having this issue.
    Is there another place in config that I should be making a setting so that condition types determined by routines are copied to the invoice without being redetermined at invoice create?

  • Pricing procedure not showing up in Inquiry

    Hi All,
    I have developed a very simple pricing procedure for inquiry. It has only one condition type i.e. PR00. I just want to enter price to update the value of inquiry on saving. It works fine if i mention material ode in inquiry, but if i do not mention material code and enter qunatity with some description, then the condtion type PR00 does not show up in the conditions TAB. How can i record my inquiry with quantity and amount for text items.
    SAPXPT

    I suggest you ask this question in an SD forum, this here is about technical questions running a SAP system on SQL Server.
    Markus

  • CIN Pricing Procedure for Intercompany Billing Process

    Hello All,
    Please suggest me what Pricing procedure I can use for Intercompany Billing for CIN.
    I have created a ZPricing Procedure coping the JINFAC but its for normal sales what CIN configuration I have to do for Intercompany billing.
    Please suggest..
    Regards
    Venkat

    Not Answered

  • External Service Mangement Service Pricing Procedure not picking up in PO

    Hi ,
    We have an issue with External Services pricing procedure:
    In SPRO->MM->External services Management->Maintain Conditions for Service
    Have defined and assigned Schema for Services , but when I make a PO entry the pricing procedure is not picked.
    I have maintined condition types , and defined schema procedure for services and there after have assigned service pricing procedure to document type for PO.
    I get a message 'Conditions for service price determination incomplete'. And the conditions which are populated are from  a different pricing procedure.
    Please help me sort the issue.
    Thanks

    Hi,
    This error triggers in case of own pricing procedure or changes to standard pricing procedure. Other reasons could be the price calculation schema is not set up for External Services Management or calculation schema not adopted from client 0 when system configured. Please refer  following  notes. Thanking you.
    SAP Note No. 25357 MM-SRV: Error in the case of service conditions
    SAP Note No. 27024 MM-SRV: Setting up components (services)

  • Standard Pricing Procedures not found

    Hi Experts,
    We have been migrating from ECC4.5 to ECC6.0, Now when i check the Standard Pricing Procedures in SPRO settings in Define Calculation Schema, I am not finding Lot of the default Standard Pricing Procedures which Usually appear in ECC6 of Fresh Installation. Could any one help me is there any Patches or Notes  to be applied on that.
    Advice your valuable inputs.
    Best Regards
    Javeed

    i think you have to import from the client 000 or 001.
    ask your basic consultant to create a user in this client and go to this client ,m/08 ,select  the procedures  and control data ,create Transport request  via menu bar table view -- Transport  and save . after that select all the condition types in that procedure  and at the top you can see * include in the transport * ,include all selected entries and save .repeat for all the procedures.
    goto your actual development client import it via SCC1 transaction
    Same way you have to import all the condition types also in M/06

  • Pricing procedure not completed

    Hi genius,
                        In sales & distribution i am entering new person. The pricing procedure should not be completed.for creation of Inquiry.
    send the Correct Answers .
    Regards,
    A.sithanandan

    Hi,
      You can maintain your pricing condition Like price/Tax/ Dismounts as mandatory in pricing procedure. This will not allow you to save the document till all pricing details are entered.
    Also you can use Incompletion procedure.
    regards,
    Siraj

  • Define pricing procedure for flexible price. But how?

    Hi experts,
    The thing I want to do: I created a new procedure which calculates order amount by the number or materials. For example if a customer buys material between 1 and 99 he or she will pay 5 euro per a material.If customer buys at least 100 material he/she pays 995+14 =499 euro total. After 99 material customer pays 4 euro per a material.But it does not work.
    How can I solve this problem?
    Thanks&Regards

    Hi
    You have to maintain the condition records based on scales.
    In the condition type customisation,
    1. Maintain scale basis as quantity
    2. Maintain scale type as D Graduated to Interval scale
    When you are maintaining condition records in VK11
    in the menu Go to---Scales and maintain the values accordingly, as per the quantity
    0-99 as 5
    99-110 as 4 and so on
    Hope this helps you
    Rwd if it helps.

  • Customer Pricing Procedure error

    Hello Gurus,
    While creating inquiry document in SAP SD I am getting error " Customer Pricing procedure not determined".
    What to do?
    Please Help

    Hi,
    Please follow the path as below:
    Firstly you need to configure pricing procedure,
    1) please go to spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures> maintain pricing procedure and assign your conditions there regarding of your procedure.
    2) customer pricing procedure, and document pricing procedure have standard options. ı think you do not need to maintain new one for them. but you should assign your document procedure to order type and billing type from spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures> Assign document pricing procedures to order types and Assign document pricing procedures to billing types.
    3) Moreover, you need to maintain determination for sales doc. as combination of your pricing procedure+ sales orgdistChdvdoc. pricing procedurecustomer pricing proc.+condition type from spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures>Define Pricing Procedure Determination.
    Finally, maintain your condition records from VK11 regarding of your access sequence. and maintain customer pricing procedure to your customer master  from sales area sales tab in customer master data from XD02.
    Please check these configurations and I hope these will solve your problem.
    Regards,

Maybe you are looking for