Prime 1.3 and FTP to Reports

Hi all,
I am trying to figure out how to FTP to my Prime installation to export reports to SQL Reporting services. I first attempted to change the location under
Administration > System Settings > Report but see that it must be local. Now what I think I want to do is to create a SQL ftp job to copy the reports from that location to my reporting server. Is this possible and if so, how?
Thank you,
Andrew

Cisco Prime 1.3 doesn't support 7.6 please check the compatibility matrix
Table 4 Cisco Prime Infrastructure and Cisco Wireless Release Compatibility Matrix
Cisco Prime Infrastructure
Cisco WLC
Cisco MSE
ISE
Remarks
Update 4 for 1.3.0.20
Update 1 for 1.3.0.20
1.3.0.20
7.4.121.0
7.4.110.0
7.4.100.60
7.4.100.0
7.3.112.0
7.3.101.0
7.2.115.2
7.2.111.3
7.2.110.0
7.2.103.0
7.0.250.0
7.0.240.0
7.0.235.3
7.0.235.0
7.0.230.0
7.1.91.0
7.0.220.0
7.0.116.0
7.0.98.218
7.0.98.0
7.4.121.0
7.4.110.0
7.4.100.0
7.3.101.0
7.2.110.0
7.2.103.0
7.0.240.0
7.0.230.0
7.0.220.0
7.0.201.204
7.0.112.0
7.0.105.0
1.0
1.1
1.2

Similar Messages

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Issue while FTP the report from BIP

Hi,
I am trying to FTP a report from BIP to a shared mount point. The report is completing fine and the history says that the FTP has also completed successfully.But when I go to the FTP location, the file is not there.
It is happening only with one report, the other reports are running fine. The file size of this file is around 25MB while other files are of less than 5MB.
Can anyone please suggest on the same?
Thanks,
Rohit
P.S- It used to work fine till sometime back.

what is the application version ?
is it seeded report ? or customized
regards

Http and ftp protocol extremely slow (pop working well though)

Hello. Starting today, on one of my macs, http and ftp protocol are extremely slow (page load 90 sec. instead of 2) (pop working well though). Provider finds nothing, on second mac all is fine (same cable, same settings … ). Cable connection, checked both sockets, changed cable, no change. Since pop3 protocol seems to work fine, this does look like a software problem to me. (Repaired permissions, no other tests or means. All used software up to date (OSX10.6.8 etc.))
I'd be thankful for any idea.

Not at all. Then I turned on NetBarrier, for testing and to avoid any damage (piece of software I don't employ in vain), and all slowed down again, but not quite as badly as before. Restarted, and now it seems back to normal with all extensions loaded. (I had done that before, obviously, and with no outcome, so it can't very well have been just that. But what?)
I'll watch and learn, and report back; unless you have any further suggestions for the moment. Either way, thankyou very much so far.

How to generate .pdx file using File Adapter and FTP Adapter

Hi,
is it possible to genearate .pdx file using oracle ESB Adapters(File Adapter and FTP adapter).
Can you anyone guide me.
Thanks,
Raj.

hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf'

Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
if ({@param} = 1 then
GroupName ({@GroupBy})
else
{NetPNL.GrossAfterAdj}
but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
MN 100
MN 200
MN 50
CA 300
CA 500
when the data shows in the report, its grouped by state, so it comes out like
MN 350
CA 800
I want the users to decide whether they want it sorted by state (ascending)
CA 800
MN 350
or Total quantity (asc)
MN 350
CA 800

FTP Discoverer report output

Is there any way to ftp the report output for scheduled Discoverer 10g workbooks without using Discoverer Desktop (i..e, directly from the server) ?
Example: A workbook is scheduled to run daily; after the report completes, the output of the report (in Excel format only) has to be ftp-ed (automatically, via a shell script or stored procedure) to a remote location (Discoverer Plus was used to create and schedule the workbooks, do not use Discoverer Desktop) - where do we pick up the ouput from on the server/database? Is the output stored on the file system or in the database? In which format is it stored?
Thanks in advance.

Thanks for the response - however, we found a method to do it - since the results of a scheduled workbook are stored in a database table, we can access the results from this table, create a text file, and ftp this file.
Method is given below (pl. let me know if we are missing anything):
1. Create a simple Discoverer workbook based on SCOTT.DEPT table, workbook name is 'DEPT'
2. Schedule DEPT workbook as 'SCOTT' user
3. Wait until the scheduled job has completed; In the Scheduling Manager the report status is 'Ready'
4. Connect to SQLPlus as the EUL owner
5. select BR_ID, BR_WORKBOOK_NAME from EUL5_BATCH_REPORTS where BR_WORKBOOK_NAME='DEPT';
SQL> select BR_ID, BR_WORKBOOK_NAME from EUL5_BATCH_REPORTS where BR_WORKBOOK_NAME='DEPT';
BR_ID BR_WORKBOOK_NAME
203443 DEPT
6. select BS_ID, BS_BR_ID, BS_SHEET_NAME from EUL5_BATCH_SHEETS where BS_BR_ID='203443';
SQL> select BS_ID, BS_BR_ID, BS_SHEET_NAME from EUL5_BATCH_SHEETS where BS_BR_ID='203443';
BS_ID BS_BR_ID BS_SHEET_NAME
203444 203443 Sheet 1
7. select BQ_ID, BQ_BS_ID from EUL5_BATCH_QUERIES where BQ_BS_ID='203444';
select BQ_ID, BQ_BS_ID from EUL5_BATCH_QUERIES where BQ_BS_ID='203444';
BQ_ID BQ_BS_ID
203445 203444
8. select BQT_ID, BQT_BQ_ID, BQT_TABLE_NAME from EUL5_BQ_TABLES where BQT_BQ_ID='203445';
select BQT_ID, BQT_BQ_ID, BQT_TABLE_NAME from EUL5_BQ_TABLES where BQT_BQ_ID='203445';
BQT_ID BQT_BQ_ID BQT_TABLE_NAME
203454 203445 EUL5_B070924102545Q1R1
This shows that the scheduled workbook 'DEPT: sheet1' is associated with the Result Set table
'EUL5_B070924102545Q1R1'
SQL> select * from EUL5_B070924102545Q1R1;
BRN1 BRVC1 BRVC2
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
9. Information about when the table was created, the creator, last updated date and who updated it can be obtained from EUL5_BQ_TABLES;
SQL> select BQT_TABLE_NAME, BQT_CREATED_BY, BQT_CREATED_DATE from EUL5_BQ_TABLES;
BQT_TABLE_NAME BQT_CREATED_BY BQT_CREATED_DATE
EUL5_B070924102545Q1R1 SCOTT 24-SEP-07

Open and cancelled Quote Report

Hi,
Can anyone give me the information for getting open and cancelled Quote Report?

I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

HST6.0 Header and footer in reports

Hi,
We have an application generated from designer 1.3.2 using Headstart, and now we need to upgrade that one to designer 6.0, Everyting works ok with the forms but when we try to generate reports we don't get any header and footer. I have looked into the demo application in Headstart and found 2 reports with header and footer but I can't figure out how to generate this from Designer.
Thanks in advance for any help!

These fragments might fall under the category of "other", as an example, there is a copyright fragment in the Other tab of the fragment toolbox window. You could copy that and enhance it to make your footer.

Customer and Vendor ageing report by ItemGroup@%@#$%@#$??

Hi All
How do we get Customer and Vendor ageing report by "ItemGroup"?
I know there is a standard report in Business One which gives you the ageing report by Business Partner Group. But I dont know whether it is possible to get by "ItemGroup". Please help me and excuse me for weird requirement..
Thanks

Hi Gordon,
that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document. my requirement is something different than this where the client wants to see the ageing report by Itemgroup.
Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date. means we should add all the open invoices' line items to be grouped with its total based on the due date. any other way to solve this?
thanks

Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Prime 1.3 and FTP to Reports

Similar Messages

Maybe you are looking for