Prinitng smartform tables in full sheet

Dear All Gurus,
This is my request. I need to print a customized smartform (ex :GRN) according to below.
Format of Smartform(1 page Smartform) :
Header Windows (Adress / LOGO)
Table Data
Footer window (signatuees / agreement texts)
(If the smartform prints 3 sheets (due to a lot of rows in the table) -
1st sheet should show the header windows & table
2nd sheet will carry out printing rest of the table data without priniting Header window (The total page space should be taken by table)
3rd sheet will print the last rows of table & footer windows )
I have designed the smartform & prints pages as above. But I cant figure out the way to expand the size of the table in the 2nd page to print it in full page.
Plz Help
Thanks'

HI,
Thank you for the reply..
Kindly note that this smartform is 01 page smartform. (I have designed everything in single page.)
Header Windows (Adress / LOGO)
Main window (Table Data )
Bottom window (signatuees / agreement )
What happens here is if the table has 5 rows of Data, it is printed perfectly in a single A4 sheet according to my requirement because space is enough to print everything.
But if there are 500 rows of Data in the table, what needs to be done is from 2nd A4 sheet onwards the table should acquire the total space of the sheet (including space given to LOGO, Address windows & bottom windows) until the loop ends.
How do I get the total space because the table doesnt expand the size in main window of the smartform.
Can we get that by expanding main window in 2nd page as you said?
Thanks

Similar Messages

Bringing a list of values from a table in another sheet

Hey everybody - Numbers / Spreasheet novice here working slowly through my project.
So in the first image I've got 2 cells with drop-down menus for "Day of week" and "Hour of day" - Using the both of them causes 1 of the cells in the table below it to print "True"
My goal is to link the "True" statement with a whole bunch of different tables on other sheets.
For example: IF Monday / 8am is "True" > Print the list from Sheet-2::8am
If I want to use the same blank table for "Monday / 9am" and "Monday / 10am" am I going to have to nest 119 separate equations in the same cell?
Is there an easier way to do this?
Thanks!!

"All the data is located on tables on separate sheets..."
From your most recent description, it appears that table shown, named 8am, is the only source for the data to fill the table Day/Hour List when the two pop-up menus in the small table are set to Mon and 8am respectively, and that all of the data on 8am is to br copied to Day/Hour List.
Extending that, I would assume that there is a similar source table for each combination of DAY and HOUR, and that setting the two pop-up menu cells determines which of these 105 tables becomes the source table for Day/Hour List.
Since the source table ("8am") does not contain an indication of which day it is for, I'd further assume that this information is included in the Sheet name of the Sheet on which 8am is placed, and that the Sheet names are identical except for the (short) day name.
"My dilemma - how do I write a function for the blank table that would copy the contents of the 27 row long "8am" table into the blank table
How do I make that same function work to do the same thing if say "Tuesday 8am" was "True" instead?"
Why bother? You can see from the small table with the day and hour pop-ups wich day and hour are selected. and it's easier to write the formula retrieving the data using those two values than to use values determined by which cell contains TRUE on a 7x15 table.
Regarding "Mon 8am" and "Tuesday 8am": You will need to decide whether you are using full day names or short day names, then be fully consistent in that use in all instances—Sheet names, pop-up cell menu items, column headers, or any where else they might be needed in formulas.
Does 8am contain "blank" as indicated, or is this an added note to indicate that these are actually empty cells? Do you want Day/Time List to show the text "blank", or to appear 'empty'?
Note that only cells where data is entered directly are likely to be truly 'blank'; there's no way directly available to the user to create a truly empty cell using a formula or a pop-up menu. The closest approximation is a null string, which appears 'empty', but actually contains a zero length string (and a formula).
Here's a possible solution, based on the assumptions above. The first example shows the result with Mon 8am selected. To the right, past the image of part of the sidebar, are images of the tables 8am and 9am from the selected sheet, Mon.
The second example shows the same two tables (on the left), with the settings changed to Tue 9am.
An image of two of the source charts from the Tue sheet are shown to the right of the Sheets list. Note that the Header Row in these is empty. The Header row cell in Day/Time List is filled using the data in the two pop-up menu cells.
Formulas:
Small table (Day Time): none. Header cells are directly entered data. Row 1 cells are pop-up menus.
Day/Time List:
A1: =Day Time :: A2&" "&Day Time :: B
A2, and filled down:
=IF(LEN(OFFSET(INDIRECT(Day Time::$A$2&"::"&Day Time::$B$2&"::$A$1"),ROW()-1,0))<1,"",OFFSET(INDIRECT(Day Time::$A$2&"::"&Day Time::$B$2&"::$A$1"),ROW()-1,0))
The core of this formula is this repeated part: OFFSET(INDIRECT(Day Time::$A$2&"::"&Day Time::$B$2&"::$A$1"),ROW()-1,0)
INDIRECT is used to build an absolute reference to a cell (A1) on the table named in Day Time::B2 on a sheet named in Day Time ::A2.
OFFSET uses the referenced cell as its base, and returns the value from the cell ROW()-1 rows below it and 0 columns to the right.
OFFSET is enclosed in an IF statement: IF(LEN(result of formula)<1,"",result of formula)
In the first instance of OFFSET, the result is passed to LEN(), which measures its length in characters. IF that LEN is less than 1, IF returns a null string to 'my cell'. Otherwise, IF calls OFFSET once again, and the result is returned to 'my cell.'
Expanding the result to a 27 row table requires only adding rows to the Day/Time List table, and filling the formula into those rows.
Regards,
Barry

Autocomplete from another table in another sheet in same file

I found how to get a price to autofill using VLOOKUP. I like it.
Now, I want to be lazier and not need to type in the full item name in the row heading completely & exactly every time. I also don't want to have a drop down menu in every item line in each table unless there is no better alternative. I would like Numbers to autofill from an inventory list (table with quantities, prices, etc.) in another sheet. It seems that I should have been able to find this function explained but my searches were inadequate.
Then, I will want Numbers to automatically update another column in the inventory table with the quantity of that item sold & the amount remaining which will cause calculations for the value remaining & sold in other columns (without changing the original inventory column). It seems to me that the formula may require numbers to search each table in each sheet for the item name in that row and add all sale quantities together. This means that the formulas would be constantly searching which sounds like it could slow things down a bit. So, again, maybe there's a more efficient way of doing this.
Please help me find these efficiency tools. ThankU

Mr. "P" wrote:
I want to copy an entire row from one table in one sheet to another table in another sheet retaining all values and formulas? So that if I make a change in the original sheet it propagates to the other sheet
(1) A change in the original will propagate to the other table if the change is in the 'copied' row.
(2) what you require can't be achieve by a copy process.
It requires the use of external references which are perfectly described in the User Guide (page 122 in the English version).
(3) sure, a reference is a cell's attribute so you will have to enter it in every cell of the row.
When it's done for one row you may use the Fill Down tool which is also described (with quite all you need to use Numbers) in the User Guide.
Yvan KOENIG (from FRANCE vendredi 19 juin 2009 15:53:03)

INDEX UNIQUE SCAN instead of   INDEX FULL SCAN or TABLE ACCESS FULL

I have calculated statistics in all tables and indexes
I have a table and a view and when I put it
SELECT *
FROM TABLE_A A
INNER JOIN VIEW_B B ON A.KEY_ID = B.PFK_KEY_ID
WHERE (B.FK_ID_XXX = 1)
If I see the execution plan:
In TABLE_A make a
TABLE ACCESS BY INDEX ROWID
INDEX UNIQUE SCAN (FIELD_A_TABLE_A_PK)
Itâs OK. I NEED IT (INDEX UNIQUE SCAN)
But If I put
SELECT A.Field_1, A.Field_2, A.Field_3, A.Field_4
FROM TABLE_A A
INNER JOIN VIEW_B B ON A.KEY_ID = B.PFK_KEY_ID
WHERE (B.FK_ID_XXX = 1)
In table A make a TABLE ACCESS FULL.
Then If I put:
SELECT /*+ INDEX(A FIELD_A_TABLE_A_PK) */ A.Field_1, A.Field_2, A.Field_3, A.Field_4
FROM TABLE_A A
INNER JOIN VIEW_B B ON A.KEY_ID = B.PFK_KEY_ID
WHERE (B.FK_ID_XXX = 1)
If I see the execution plan:
In TABLE_A make a
TABLE ACCESS BY INDEX ROWID
INDEX UNIQUE SCAN (FIELD_A_TABLE_A_PK)
Itâs OK. I NEED IT (INDEX UNIQUE SCAN)
Finally, If I put other tables and views in the query (I NEED IT)
For example:
SELECT /*+ INDEX(A FIELD_A_TABLE_A_PK) */ A.Field_1, A.Field_2, A.Field_3, A.Field_4
FROM TABLE_A A
INNER JOIN VIEW_B B ON A.KEY_ID = B.PFK_KEY_ID
INNER JOIN TABLE_Câ¦.
LEFT JOIN VIEW_Dâ¦.
WHERE (B.FK_ID_XXX = 1)
If I see the execution plan:
In TABLE_A make a
TABLE ACCESS BY INDEX ROWID
INDEX FULL SCAN (FIELD_A_TABLE_A_PK)
I need INDEX UNIQUE SCAN instead of INDEX FULL SCAN or TABLE ACCESS FULL.
How can obtain it?
What happens???
Thanks!

Notice the difference in cardinality between your two select statements:
SELECT STATEMENT, GOAL = ALL_ROWS Cost=5 Cardinality=1
SELECT STATEMENT, GOAL = ALL_ROWS Cost=10450 Cardinality=472161Apparently since the optimizer believed the first statement was going to return one row, it used an index. But in the second statement it believed it was going to return nearly the whole table (didn't you say it had around 500k rows?). Hence full table scan.

How do I sum across the same table in multiple sheets?

So I'm trying to figure out an annoying problem.
I have a largish (100's) amount of data with each collection being a table in a sheet, one sheet per data collection. This means I have 100's of sheets, each with the same table name and layout. Each sheet has several hundred data points in it.
How do I do a sum across all of the same table in all the sheets?
For example I want to do Sum('Data Sheet Number *'::'Table 1'::A1) to get a sum of everything in all the A1 cells of all the sheets named 'Data Sheet Number ' followed by anything (I'm using the star in the same way one would do it in a shell...)
Thanks!
Message was edited by: unusedusername
Message was edited by: unusedusername

To respond to WWJD: I was handed the data and I don't have any control over it's format...
I found the answer in the forums though, so I guess I'm answering my own question
http://discussions.apple.com/thread.jspa?messageID=6203991&#6203991
The auto-filling INDIRECT reference worked very well for me.

Creating a "Print View" of a Table on Another Sheet

Hi-
I would like to create a "print view" of a table on another sheet that already has reorganization filters applied to it. There is a template in Numbers called "Employee Schedule" that has exactly this, where the "printable" table's cells simply reference every cell in the source table on the other sheet.
I know there is a way to very quickly (i think with a dragging motion), create the references in each cell in one or two operations, as opposed to going to each individual cell and typing in the reference to the source table. I saw a post about how to do this a while back but cannot seem to locate it again
How do I do this? Thanks again for everyones help ;-)
Thanks
Matt

mattford1 wrote:
Hi-
Re-reading this, I don't think this answered my question. I understand how to reference a single cell, but how do you reference an entire table easily without having to go to each cell.
Thanks
Matt
Matt,
Select the first cell by clicking once on it, such that the border is highlighted. Then grab the little circle in the lower right corner of the border and drag it to the end of your table, either right or down. You can use this method to fill down or to the right. Sometimes it can be fussy, and if it refuses to behave, then you can use the alternate method, Copy and Paste. Click once on the first cell and Command-C. Shift-click the last cell and Command-V.
Jerry

How to export the data from table to excel sheet

hi experts i have some problem am trying to export the data fro table to Excel sheet in the view controller i have created one button wit public void onActionCLEAR(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionCLEAR(ServerEvent)
   //wdContext.nodeBapi_Salesorder_Getlist_Input().
   //wdContext.nodeBapi_Salesorder_Getlist_Input().invalidate();
    //@@end
//@@begin javadoc:onActionExporToExcel(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionExporToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionExporToExcel(ServerEvent)
     try{
     FileOutputStream fos=new FileOutputStream("Test.xls");
      PrintStream ps=new PrintStream(fos);
      ps.println("<html><body><table border=1>");
      int size=wdContext.nodeBapi_Salesorder_Getlist_Input().size();
       Iterator attributes=wdContext.getNodeInfo().iterateAttributes();
       ps.println("<tr>");
       while(attributes.hasNext()){
        ps.println("<th>");
        DataAttributeInfo attrName=(DataAttributeInfo)attributes.next();
        ps.println(attrName.getName());
        ps.println("</th>");
       ps.println("</tr>");
      for(int i=0; i<wdContext.nodeBapi_Salesorder_Getlist_Input().size();i++)
        attributes=wdContext.getNodeInfo().iterateAttributes();
        ps.println("<tr>");
        IWDNodeElement ele=wdContext.getElementAt(i);
        while(attributes.hasNext()){
          ps.println("<td>");
          DataAttributeInfo attrName=(DataAttributeInfo)attributes.next();
          ps.println(""+ele.getAttributeAsText(attrName.getName()));
          ps.println("</td>");
        ps.println("</tr>");
       ps.println("</table></body></html>");
       ps.flush();
       ps.close();
       fos.close();
      catch(Exception e){
       wdComponentAPI.getMessageManager().reportException(e.getMessage(), false);
      finally{
     //return("Test.xls") ;
    //@@end
}h action and i have return the code
its running sucessfully but am not able to perform the action plz help me

Hi,
You shouldn't use DataAttributeInfo as it is an internal object, if I'm correct.
Use IWDAttributeInfo instead of DataAttributeInfo and it should work
(See also API doc of IWDNodeInfo.iterateAttributes() at http://help.sap.com/javadocs/nwce/ce711sp02/wdr/com.sap.wdr/com/sap/tc/webdynpro/progmodel/api/IWDNodeInfo.html#iterateAttributes())
Cheers,
Robin

How to download internal table to excel sheet

I have a requirement to download nearly 8 to 10 internal tables to excel sheets(for each internal table one excel sheet) without displaying the diolog box showing open and save buttons.
scenario :
I will enter the path name like this -   C:\myfolder\Custom_programs.xls.
                                                        C:\myfolder\Custom_tables.xls.
                                                        (File name does not exit..it has to created inside the
                                                            specified folder)
in submit button I populate 2 internal tables say it1 and it2. then I need to move the tables contents to the path I have specified above.
attach_file_to_response method is not working for the above reqt since it is showing the dialog box.
Please provide a suitable solution...

Please ignore all the responders that are stating that you can use GUI_DOWNLOAD from Web Dynpro ABAP. As you found out, this absolutely will not work, since this function module and other download logic like it depends upon a connection to the SAPGUI. People posting to use the GUI_DOWNLOAD from WDA need to learn a little more about the architecture of WDA before they go posting incorrect repsonses in the forum. I have little tollerance for people posting outright incorrect information in the WDA Forum.
What you want to do - download silent - is not easily done from WDA. There are rules about how web applications must behave in a browser. Normal HTML/JavaScript does not allow silent downloads for security reasons. Obviously there are many untrustworthy websites on the internet that you wouldn't want to allow to directly access your local machine. WDA must live within these same browser limitations.
SAP has done some work using a Java Applet to get around some of these security issues. This funcitonality comes in NetWeaver 7.01. It is the AcfUpDownload UI element:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b9157c878a2d67e10000000a42189c/frameset.htm
However it is designer for usage with the Content or KPro server - so even it might not meet your needs.

Gui_download for transferring the data from internal table to excel sheet.

hi all,
i am using gui_download for transferring the data from internal table to excel sheet.
I have a internal table with 3 columns col1,col2,col3 and I am getting the file at the specified path,but my problem is that,in the excel sheet(path specified) all the 3 columns values are printed in one column.Please help me.
Thanks in advance.

Hi Venkata,
plz use FM 'SAP_CONVERT_TO_XLS_FORMAT' :
call function 'SAP_CONVERT_TO_XLS_FORMAT'
    exporting
*   I_FIELD_SEPERATOR          =
*   I_LINE_HEADER              =
      i_filename                 = p_file
*   I_APPL_KEEP                = ' '
    tables
      i_tab_sap_data             = t_mbew
* CHANGING
*   I_TAB_CONVERTED_DATA       =
* EXCEPTIONS
*   CONVERSION_FAILED          = 1
*   OTHERS                     = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hope this helps,
Erwan

Tables for Balance sheet Items.

Dear All,
I want to know the tables for Balance Sheet items like Current Assets Current Liabilities etc like where the
cumulative amounts of there accounts goes ?
If not so given in SAP please suggest me the procedure for How to get there amounts in respective tables.
Regards,
Pankaj.

Hi
Michael.
The balances given over here in GLT0 and there respective fields are as on date balance as per Trial balance ?
My basic requirement is that the table should show the balances as per updated Trial Balance.
Please Help.
Regards,
Pankaj.

In smartform table data is repeating

in smartform table, data is repeating and filling the page...
actual data is only 3 rows...
but it repeats and fills the page...how can i stop this...

Hi Rajkamal
You can easily debug the smartform; try hardcoding the break-point for your user ID. (Break <ID>)
Please check the number of entries in your table.
If the number of entries are correct it can be only some loop in smartform - happy hunting !!
Neer

How to copy table from one sheet to another making formulas relative to current sheet

I'm truly sorry if this has been answered within this forum but I've been reading these posts for the last hour and nothing. Ok so here's my issue:
I'm trying to do a budget spreadsheet. My ss contains sheets with each one representing a month. So sheet 1 is called January, 2 February etc.
I have two table in each sheet, one with a list of expenses and the other is a subtable with that references the first table for special expenses. The second table is identical in functionality in each sheet so I do a copy from January into February. However, when I copy into Feburary, all my formulas still point to 'January::' and I have to go and remove the 'January::' from each cell.
Is there any way to copy the second table and make it relative to the sheet that it's in? It seems simple and maybe I'm doing something fundamentally wrong but I can't find the answer anywhere.

I made a simple version of what I think you are describing:
I gave each table a name "Tabl" and "SubTable"
SubTable cell A1 is assigned as follows:
A1=Table :: A1
Then I duplicated the January Sheet by highlighting the sheet and typing the key command <COMMAND>+d (or selceting the menu item "Edit > Duplicate"):
Then I change the name of the new shee from "January -1" to "February"
The relative reference should already exist.
You can confim this by changing the contants of the informaiton in cell A1 of Table in the "February sheet

Deleting a table or a sheet in Numbers for iPad

Hi,
I think I must be getting fairly thick as I get older. I cannoy see how to delete a table or a sheet from a numbers worksheet. I have searched this forum but couldn't seem to turn up any discussions.
Andrew.

This issue puzzle me as well and I had settled for the answer posted here. This solution, however, just deletes the table but leaves the sheet.
To delete the sheet (and everything on it) single-tap the sheet name. A "Duplicate | Delete" menu will pop up and you're done!

Oracle 9.2 prefers Table Access Full over Local Index by rowid access

There's this table that has phone call records (30 million per day) that is partitioned by month (using the date column) and stores the last 6 months.
The primary key is date (varchar2 in yymmdd format) + call_id (a varchar2(18) with a format like this yyyymmdd+<3letters>+<sequentialnumber>)
The partition is by range like this:
PARTITION BY RANGE (FECHA)
PARTITION P200804 VALUES LESS THAN ('080501')
LOGGING
NOCOMPRESS,
If I run this query I get this plan
SELECT FECHA, SENTIDOTRAFICO,GEOGRAFIAID,SWITCHID,TIPOTRAFICOID,COUNT(*)
FROM GES_CDRS_RCNG_NEW
WHERE FECHA BETWEEN '080801' AND '080825'
     AND TASACION IS NULL
     AND BORRADO IS NULL
GROUP BY FECHA, SENTIDOTRAFICO,GEOGRAFIAID,SWITCHID,TIPOTRAFICOID
Plan
SELECT STATEMENT CHOOSECost: 78 K Bytes: 24 K Cardinality: 1 K
     2 SORT GROUP BY Cost: 78 K Bytes: 24 K Cardinality: 1 K
          1 TABLE ACCESS FULL GESTION.GES_CDRS_RCNG_NEW Cost: 43 K Bytes: 625 M Cardinality: 31 M Partition #: 2 Partitions accessed #5
If I hint the primary key index using /*+INDEX(GES_CDRS_RCNG_NEW PK_CDRS_RCNG_NEW)*/
I get a different plan
Plan
SELECT STATEMENT CHOOSECost: 954 K Bytes: 24 K Cardinality: 1 K
     3 SORT GROUP BY Cost: 954 K Bytes: 24 K Cardinality: 1 K
          2 TABLE ACCESS BY LOCAL INDEX ROWID GESTION.GES_CDRS_RCNG_NEW Cost: 918 K Bytes: 625 M Cardinality: 31 M Partition #: 2 Partitions accessed #5
               1 INDEX RANGE SCAN UNIQUE GESTION.PK_CDRS_RCNG_NEW Cost: 137 K Cardinality: 31 M Partition #: 3 Partitions accessed #5
Looking at the cost, the full scan is way better, but this is obviously not the case. Why does this happen?
This problem forces many querys on this table to use hints or force the index use by adding conditions to the where clause like this
where fecha = '080801'
and clave like '20080801%'
when just by stating the date would be enough to choose the correct partition. It also messes up joins with other tables.
The table is analized every month, it has statistics that claim: 237,981,000 rows, 3,222,677 blocks, GLOBAL STATS: YES, LAST ANALYZED: 15/10/2008 21:05:26, Average row length: 213.
The partition envolved in this query has this stats: 32,520,520 rows, 442,715 blocks, analized on 27/08/2008 20:43:40
The index has this stats: analized on 15/10/2008 21:35:32, Blevel: 3, leaf blocks: 1,056,410, distinct keys: 238,484,510.
It is a local index and each partition has its own statistics.

If I don't understand incorrectly the plan and the Predicater information, it seems the full scan version that costs less is actually doing a full scan from the biggining of the table (6 months) up to the 080825 date and the one using an index (hinted) does a better scan.
without hint
| Id | Operation            | Name              | Rows | Bytes | Cost | Pstart| Pstop |
|   0 | SELECT STATEMENT     |                    | 1170 | 24570 | 78443 |       |       |
|   1 | SORT GROUP BY       |                    | 1170 | 24570 | 78443 |       |       |
|* 2 |   TABLE ACCESS FULL | GES_CDRS_RCNG_NEW |    31M|   625M| 42579 |     5 |     5 |
Predicate Information (identified by operation id):
   2 - filter("GES_CDRS_RCNG_NEW"."FECHA"<='080825')
Note: cpu costing is offWith the hint:
| Id | Operation                          | Name              | Rows | Bytes | Cost | Pstart| Pstop |
|   0 | SELECT STATEMENT                   |                    | 1170 | 24570 |   953K|       |       |
|   1 | SORT GROUP BY                     |                    | 1170 | 24570 |   953K|       |       |
|   2 |   TABLE ACCESS BY LOCAL INDEX ROWID| GES_CDRS_RCNG_NEW |    31M|   625M|   918K|     5 |     5 |
|* 3 |    INDEX RANGE SCAN                | PK_CDRS_RCNG_NEW   |    31M|       |   136K|     5 |     5 |
Predicate Information (identified by operation id):
   3 - access("GES_CDRS_RCNG_NEW"."FECHA">='080801' AND "GES_CDRS_RCNG_NEW"."FECHA"<='080825')
Note: cpu costing is off

PR_Accept() failed, error -5971 (Process open FD table is full.)

I am working on a web app which uses the SunONE directory server for
some authorization. Sometimes it happens that the webserver just hangs
with no errors in the webserver log. In the slapd error logs I do see
the following exceptions :
PR_Accept() failed, error -5971 (Process open FD table is full.)
I am not sure why is this happening? What could be the problem? I am
assuming FD means the file descriptor? One bug we found in the app is
that it tries to add a new user in the LDAP even if its there. I do get
"add value to attribute type nsRoleDN in entry .....: duplicate value"
exceptions, but thought its harmless. Could this exception be causing
something?

Hi,
I had exactly the same error message. I did not find the cause of this after spending a lot of time looking around. I only know it is a file descriptor table problem. The sun one directory server access log, however, did not have the number of file descriptors count reached maximum. I am very much puzzled by this. Did you find out why yet?
u4me2

Prinitng smartform tables in full sheet

Similar Messages

Maybe you are looking for