Print for MIGO

Hi,
we have got the ZWE1message type for material document printing(MIGO).This material document is printed automatically when MIGO is posted.
When the service entry sheet is created Acceptance material document(GR) document is created apart from the service entry sheet creation.
But problem is that when the Service entry sheet is posted, automatically acceptance GR document of that service entry sheet is printing automatically.
1) How to stop this printing of Acceptance material document created with service entry sheet.
2) At the same time mat documents created through MIGO should be printed automatically,there should not be any problem
3) These prints created by service entry sheets(User is different) are printed at the printer of the User where Goods reciepts can be done(MIGO).
4) Configuration is done in printer determination,for plant/storage location -printer is assigned for the ZWE1,
5) I have selected the option,instead of storage location/plant"out type user" is selected in ZWE1 message typeDetails option.
Under printer determination ,i have assigned the user id to printer, Even though, when i post the MIGO or Serive entry sheet the print is coming for the previous printer.
Please suggest,what needs to be to be to avoid printing of Acceptance Material doc of service  entry sheet.
Regards,
Cheruku.Dayanand
Please suggest what needs to be done.
Regards,
Cheruku

Dear Gopala,
From where the service entry acceptance material documents are getting,there is no default printer set in SU3,even though print is getting in the warehouse printer where the default printer is set for the ZWE1 message type.
Under printer determination/plant/storage location,default printer is set for the ZWE1 message type.so prints for the  service entry acceptance material documents also getting to the same printer.
How to avoid this prints from the service entry acceptance material documents .
Please suggest.
Regards,
Dayanand

Similar Messages

  • Output Print for MIGO movement type-107.

    Hi All kindly help me in resolving the following issues:-
    There is the requirement of printing RF Label while saving the GR from PO in movement type-107.
    Help me to configure the output type in this case.
    How the data flows from MIGO transaction to the ABAP program and finally to the printer ?
    How to link the output type to the transaction MIGO and so in movement type-107 ?

    Hi,
    go to spro-Materials Management-Inventory Management and Physical Inventory-General Settings.
    in General Settings print version migo is 2 .execute after Maintain Print Indicator for Goods Receipt Documents check 107 mvt type.
    refer the below link
    Print material document (WE02) automatic when GR
    Regards
    Raj.

  • Its ........ form printing for MIGO

    Hello gurus,
                      I have developed one form goods receipt note for MM in ECC 6.0.its copy of standard ,its working fine in testing client
                     but after transporting the request in production i am getting this error
                     Output could not be displayed (it may not be complete)
                                   Message no. VN069
                All objects are transported in Production.

    Hello,
    A similar kind of issue and hope, the below link may be helpful for you.
    Output Could Not Be displayed(It may be complete) Smartforms error
    Regards,
    Selva K.

  • Bapi for migo transaction

    i have created a bapi to upload data for MIGO transaction.. (GOODS RECEIPT-->PURCHASE ORDER)
    i am getting the error " stock posting is not possible for this material "'.
    when i create directly, it is posted.. while uploading through the program it shows the above error.
    please suggest if anyone knows....
    Thanks in advance,
    Dhivya N.

    *& Report  ZR_MIGO_UPLOAD
    *& package name : zabap
    *& transport request number : MIDK901443
    *& program to upload goods movement
    REPORT ZR_MIGO_UPLOAD.
    ***DATA DECLARATION***
    type-POOLs:  icon.
    TYPES: BEGIN OF TY_GR_PO,
            EBELN(10) TYPE c ,     "'PO NUMBEr
            EBELP(10) TYPE c,     "PO ITEM NUMBER
    *       LGOBE TYPE LGOBE,     "STORAGE LOCATION DESCRIPTION
            LGORT(10) TYPE c,     "STORAGE LOCATION
            XFELD TYPE c,     "ITEM OK
            GERNR(10) TYPE c,     "SERIALNUMBER
            END OF TY_GR_PO.
    DATA: TA_GR_PO TYPE TABLE OF TY_GR_PO,    "TABLE FOR GOODS RECEIPT PURCHASE ORDER
           WA_GR_PO TYPE TY_GR_PO.
    DATA: BLDAT TYPE BLDAT,     "DOCUMENT DATE
            BUDAT TYPE BUDAT,     "POSTING DATE
            WEVER TYPE WEVER.     "VERSION FOR PRINTING GR SLIP
    ***BAPI DECLARATION***
    DATA: BEGIN OF GM_HEAD OCCURS 0.                    "Material Document Header Data
             INCLUDE STRUCTURE BAPI2017_GM_HEAD_01.
    DATA: END OF GM_HEAD.
    DATA: BEGIN OF GM_CODE OCCURS 0.
             INCLUDE STRUCTURE BAPI2017_GM_CODE.          "Assign Code to Transaction for Goods Movement
    DATA: END OF GM_CODE.
    DATA: BEGIN OF GM_RET OCCURS 0.
             INCLUDE STRUCTURE BAPI2017_GM_HEAD_RET.       "Material Document Number/Material Document Year
    DATA: END OF GM_RET.
    DATA: BEGIN OF GM_ITEM OCCURS 0.
             INCLUDE STRUCTURE BAPI2017_GM_ITEM_CREATE.    "Material Document Items
    DATA: END OF GM_ITEM.
    DATA: BEGIN OF GM_SER OCCURS 0.
             INCLUDE STRUCTURE BAPI2017_GM_SERIALNUMBER.    "Serial Number
    DATA: END OF GM_SER.
    data: BEGIN OF ta_bapireturn OCCURS 0.
            INCLUDE STRUCTURE BAPIRET2.
    data: END OF ta_bapireturn.
    ***declaration of excel file handling table***
    FIELD-SYMBOLS: <fs> type any.    "field symbol for alsm_excel
    DATA: TA_EXCEL TYPE TABLE OF ALSMEX_TABLINE,  "table to contain excel sheet values
           WA_EXCEL TYPE ALSMEX_TABLINE.
    ***declaration of other parameters***
    data:       V_brow type i VALUE    2,    "BEGIN OF ROW
                 V_bcol type i value   1,     "BEGIN OF COL
                 V_erow type i value 65536,   "END OF ROW
                 V_ecol type i value 256.     "END OF COLUMN
    DATA:  V_sear type string,
            V_INDEX TYPE i,
            V_tabix type sy-tabix,     "current line.
            v_lines type i.          "total number of records
    DATA: DATE TYPE DATS.
    ***SELECTION SCREEN***
    ***SELECTION SCREEN DESIGN***
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP 3.
    PARAMETERS: zCODE(2) TYPE C MATCHCODE OBJECT H_T158G,
                 zrefdoc type REFDOC,
                 version type WEVER.
    SELECTION-SCREEN skip 5.
    PARAMETERS: p_file type ibipparms-path.
    SELECTION-SCREEN SKIP 3.
    SELECTION-SCREEN END OF BLOCK b1.
    ***SELECTION SCREEN VALUE REQUEST***
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
       CALL FUNCTION 'F4_FILENAME'                                    "f4 help for file name
         EXPORTING
           PROGRAM_NAME  = SYST-CPROG
           DYNPRO_NUMBER = SYST-DYNNR
           FIELD_NAME    = 'P_FILE'
         IMPORTING
           FILE_NAME     = P_FILE.
    ***SELECTION SCREEN EVENT***
    AT SELECTION-SCREEN.                                 "validation
       if p_file <> ''.
         V_sear = p_file.
         SEARCH V_sear for '.xls'.
         if sy-subrc <> 0.
           message 'please provide excel file. it is not valid' type 'E'.
         ENDIF.
       ENDIF.
    INITIALIZATION.
    *   DATE = '17.04.14'.
       GM_HEAD-PSTNG_DATE = SY-DATUM.
       GM_HEAD-DOC_DATE   = SY-DATUM.
       gm_head-pr_uname = sy-uname.
    ***START OF SELECTION***
    START-OF-SELECTION.
       gm_head-REF_DOC_NO = zrefdoc.
       gm_head-VER_GR_GI_SLIP = version.
       GM_CODE-GM_CODE = zCODE.
       PERFORM EXCEL_UPLOAD.
       PERFORM EXCEL_CONVERSION.
       PERFORM NO_RECORDS.
    END-OF-SELECTION.
       PERFORM BAPI_ASSIGNMENT.
       PERFORM BAPI_FM.
    *&      Form  EXCEL_UPLOAD
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM EXCEL_UPLOAD .
       CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
         EXPORTING
           FILENAME                = P_FILE
           I_BEGIN_COL             = V_BCOL
           I_BEGIN_ROW             = V_BROW
           I_END_COL               = V_ECOL
           I_END_ROW               = V_EROW
         TABLES
           INTERN                  = TA_EXCEL
         EXCEPTIONS
           INCONSISTENT_PARAMETERS = 1
           UPLOAD_OLE              = 2
           OTHERS                  = 3.
    ENDFORM.                    " EXCEL_UPLOAD
    *&      Form  EXCEL_CONVERSION
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM EXCEL_CONVERSION .
       if ta_excel is NOT INITIAL.
         sort ta_excel by row col.
         clear wa_excel.
         clear wa_GR_PO.
         LOOP AT ta_excel INTO wa_excel.
           move wa_excel-col to v_index.
           ASSIGN COMPONENT v_index OF STRUCTURE wa_GR_PO to <fs>.
           if sy-subrc = 0.
             move wa_excel-value to <fs>.
           ENDIF.
           at END OF row.
             append wa_GR_PO to ta_GR_PO.
             clear wa_GR_PO.
           ENDAT.
         ENDLOOP.
       else.
         MESSAGE 'no data for conversion' type 'I'.
       ENDIF.
    ENDFORM.                    " EXCEL_CONVERSION
    *&      Form  NO_RECORDS
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM NO_RECORDS .
       DESCRIBE TABLE ta_GR_PO LINES v_lines.
       if v_lines = 0.
         MESSAGE 'NO RECORDS TO UPLOAD' TYPE 'E'.
       ENDIF.
    ENDFORM.                    " NO_RECORDS
    *&      Form  BAPI_ASSIGNMENT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM BAPI_ASSIGNMENT .
       IF TA_GR_PO IS NOT INITIAL.
         LOOP AT TA_GR_PO INTO WA_GR_PO.
           gm_item-PO_NUMBER = wa_gr_po-ebeln.
           GM_ITEM-STGE_LOC = WA_GR_PO-LGORT.
           GM_ITEM-PO_ITEM = WA_GR_PO-EBELP.
           GM_ITEM-NO_MORE_GR = 'X'."WA_GR_PO-XFELD'.
    *      GM_SER-SERIALNO = WA_GR_PO-GERNR.
           gm_item-NO_MORE_GR =  1.
           gm_item-ENTRY_QNT = 2.
           gm_item-MOVE_TYPE = 101.
    *      gm_item-MVT_IND = 'B'.
           gm_item-plant = 'P001'.
           gm_item-move_stloc = 'FG01'.
    *      GM_ITEM-SPEC_STOCK = 'K'.
           APPEND GM_ITEM.
           APPEND GM_SER.
         ENDLOOP.
        ELSE.
          MESSAGE 'DATA IS NOT UPLOADED' TYPE 'I'.
        ENDIF.
    ENDFORM.                    " BAPI_ASSIGNMENT
    *&      Form  BAPI_FM
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM BAPI_FM .
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
       EXPORTING
         GOODSMVT_HEADER               = gm_head
         GOODSMVT_CODE                 = gm_code
    *   TESTRUN                       = ' '
    *   GOODSMVT_REF_EWM              =
      IMPORTING
        GOODSMVT_HEADRET              = gm_ret
    *   MATERIALDOCUMENT              =
    *   MATDOCUMENTYEAR               =
       TABLES
         GOODSMVT_ITEM                 = gm_item
        GOODSMVT_SERIALNUMBER         =  gm_ser
         RETURN                        = ta_bapireturn
    *   GOODSMVT_SERV_PART_DATA       =
    *   EXTENSIONIN                   =
    if ta_bapireturn-type = 'S'.
         write:/ icon_green_light as icon,
                 'success: Material document',gm_ret-mat_doc,  'is created for the GOODS RECEIPT- po number : ', wa_gr_po-ebeln,
               / 'reason:' , ta_bapireturn-message.
    ELSEIF ta_bapireturn-type = 'E'.
         write:/ icon_red_light as icon,
                 'error: Material document',gm_ret-mat_doc , 'is not created for the GOOD RECEIPT- po number : ', wa_gr_po-ebeln,
               / 'reason:' , ta_bapireturn-message.
    ENDIF.
    ENDFORM.                    " BAPI_FM

  • User exit/BADI for MIGO Batch numbers

    Hi All,
    I want to find a user exit which will give the oldest batch number (MCHA-LWDET) of semi-finished product during the goods receipts of the finished prodocut in MIGO.
    Could you please give me any hints to find out the user exit for this.
    Regards,
    Sekhar D

    Hi,
    Check these User exits... for MIGO
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    Check thse BADI's.. for MIGO
    Badi Name          
    ARC_MM_EBAN_CHECK   
    ARC_MM_EBAN_WRITE   
    ARC_MM_EINA_WRITE   
    ARC_MM_INVBEL_WRITE 
    ARC_MM_MATBEL_CHECK 
    ARC_MM_MATBEL_WRITE 
    MB_CHECK_LINE_BADI  
    MB_CIN_MM07MFB7     
    MB_CIN_MM07MFB7_QTY 
    MB_DOCUMENT_BADI    
    MB_DOCUMENT_BADI_SAP
    MB_DOCUMENT_BADI_SAP
    MB_DOC_BADI_INTERNAL
    MB_DOC_BADI_INTERNAL
    MB_ME_CSGMT_BADI_SAP RTFASH:
    MB_MIGO_BADI        
    MB_MIGO_ITEM_BADI   
    MB_PHYSINV_INTERNAL  MB_PHYSINV_INTERNAL BAdI Implementation
    MB_RESERVATION_SCR   DFPS: Field in the Reservation
    MB_RESERVATION_UPCHD DFPS: Reservation
    Regards,
    Raghu
    Edited by: Raghavendra  Rao G on Aug 27, 2009 5:50 PM

  • User Exit for MIGO (goods receipt and goods issue)

    Hi all ,
    When i create a cross company goods receipt or goods issue through MIGO,I need to add another line item to the accounting documents posted with the sales tax calculated.For this i need to use a user exit which adds another line item.
    Can someone suggest me the user exit which i need to use ?
    any input would be of great help.
    Thanks,
    nsp.

    Hi
    Available exits for MIGO are
    Transaction Code - MIGO                     Goods Movement
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    No of Exits:          8
    You would hav to search through these.
    Hope this helps to solve ur problem....
    <b>do reward if useful....</b>
    regards
    dinesh

  • Inventory Management-Change designated printer for Goods Receipts

    Hi,
    I am trying to change the designated printer that is assigned for printing our Goods Receipts. We are on 4.6C. I have looked at all of the IMG configuration tools and have not found the one that has the currently assigned printer shown. This includes IMG->Materials Management->Output Determination->Printer Determination and the current printer is not listed.
    Are there more than one way to set the default printer for the GR print function when using transaction MIGO? Where or how is the printer defined?

    Dear Mark,
    One way is to maintain default printer for user, in SAP menu bar select System -> User Profile -> Own Data -> under Defaults tab enter printer name in output device.
    Also visit the following links:
    Refer these links
    http://help.sap.com/saphelp_47x200/helpdata/en/93/745115546011d1a7020000e829fd11/frameset.htm
    http://web.mit.edu/sapr3/docs/webdocs/getstarted/gsSETTINGS.html
    https://unebapps01.nebraska.edu/slugo/faq.nsf/50b3ab1ea706e0f886256798005a7505/c77b2fe1c079454886256fc8005456c0?OpenDocument
    Hope this will help.
    Regards,
    Naveen.

  • Field Exit For Migo Badi

    Hi to all experts,
    I need to assign F4 help to a headertext field for MIGO tcode . I have searched all the exits but couldnt find field exit for it. What are the different options fulfilling this requirement.Please help me out

    Hi,
        The following are the enhancement/Business Add ins,  Please use the appropriate exit for your requirement
      Enhancement/ Business Add-in            Description
    Enhancement
    MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0011                                Read from RESB and RKPF for print list in  MB26
    MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0009                                Filling the storage location field
    MBCF0007                                Customer function exit: Updating a reservation
    MBCF0006                                Customer function for WBS element
    MBCF0005                                Material document item for goods receipt/issue slip
    MBCF0002                                Customer function exit: Segment text in material doc. item
    Business Add-in
    MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
    MB_DOC_BADI_INTERNAL                    BAdIs During Creation of a Material Document (SAP Internal)
    MB_ME_CSGMT_BADI_SAP                    BAdI: Consignment Processing - Stock Transfer
    MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
    MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
    MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
    MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
    MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
    MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
    MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
    MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
    MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
    MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
    MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)
    MB_DOCUMENT_BADI_SAP                    BADI for Creation and Changing of a Material Document
    ARC_MM_EBAN_CHECK                       BAdI: Enhancement of Archivability Check (MM_EBAN)
    ARC_MM_EBAN_PRECHECK                    BAdI: Enhancement of Archivability Check (MM_EBAN)
    ARC_MM_EBAN_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EBAN)
    ARC_MM_EINA_CHECK                       BAdI: Enhancement of Archivability Check (MM_EINA)
    ARC_MM_EINA_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EINA)
    ARC_MM_INVBEL_CHECK                     BAdI: Enhancement of Archivability Check (MM_INVBEL)
    ARC_MM_INVBEL_WRITE                     BAdI: Enhancement of Scope of Archiving (MM_INVBEL)
    ARC_MM_MATBEL_CHECK                     Prüfung ADD-ON-spezifischer Kriterien für MM_MATBEL
    ARC_MM_MATBEL_WRITE                     Check Add-On-Specific Data for MM_MATBEL
    MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
    MB_CIN_LMBMBU04                         posting of gr
    MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
    MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
    MB_DOCUMENT_BADI                        BAdIs During Creation of a Material Document

  • BADI or EXIT for MIGO

    Hi,
    I need a BADI or EXIT that is executed AFTER TO POST
    Goods Receipt from Purchase Order
    (101 Goods receipt for purchase order into warehouse/stores)
    for transaction MIGO
    I try with MB_MIGO_BADI, MB_DOCUMENT_BADI AND EXITS but are
    executed before the post.
    Thank's.
    Mariano.

    Following are the exits available for MIGO.
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0009 Filling the storage location field
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011 Read From RESB and RKPF For Print List in MB26
    MBCFC003 Maintenance of batch master data for goods movements
    MBCFC004 Maintenance of batch specifications for goods movements
    Thanks,
    Santosh

  • User exit for MIGO - Change on Posting A/C Code Upon Saving.

    Hi,
    I have a requirement to to split the GR/IR clearing account during the posting of goods receipt in MIGO by filled in BSEG-HKONT with specify a/c code (hard coded).
    I'm not able to find any user exit to change the value in BSEG-HKONT
    while click on save.
    Is there any suggestion on it?
    Thanks.

    Hi ,
    Try with the following User Exits for MIGO.
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. D
    MBCF0002  Customer function exit: Segment text in material doc. i
    MBCF0005  Material document item for goods receipt/issue slip
    MBCF0006  Customer function for WBS element
    MBCF0007  Customer function exit: Updating a reservation
    MBCF0009  Filling the storage location field
    MBCF0010  Customer exit: Create reservation BAPI_RESERVATION_CREA
    MBCF0011  Read from RESB and RKPF for print list in  MB26
    Thanks,
    SVREDDY

  • BADI or UserExit for MIGO Tcode

    Hi ,
        I want to capture purchase order number and movement type.I have check whether excise duty is posted or not. If it is posted means i should not allow the user to reverse the GR with Movement type '102' and it should throw a message.So kindly tell which user exit or badi will solve this problem.
    Regards,
    Ashok.

    Hi Ashok,
    Following are the User Exits available for MIGO:
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    Seems MBCF0005 / MBCF0007 may of use. Please try.
    Hope this Helps.
    Manish

  • User-exit for MIGO, need change GKONT for CO

    Good evening,
    Dear friends, sorry for my english.
    I have made user-exit for MIGO in GGB1 and put on it in SPRO.
    I have HKONT=V3100* and corresponding HKONT=1551*( OBYC, group WRX).
    Then i run MIGO and make Purchase Order.
    In my user exit, if HKONT of first position eq V3100, i must change corresponding HKONT from 1551 to V1551*.
    When i make Order, i am run view documents: FI and other HKONTs changed successfully! ( first possition has V3100, second - V1551).
    User-exit must work only with sy-tcode = MIGO or MIRO.
    But CO documens NOT changed: HKONT(type of cost) eq V3100, but corr GKONT = 1551*...
    I also try to use OPEN FI, but have the same picture... (in CO docs V3100* and 1551, but all another docs and FI too - V3100 and V1551*).
    I see, that GKONT has only COEP. And this table a cannot see in user-exit.
    I think, that FI doc must do CO doc,
    but why in
    View documents->RW-infodocs->documents CO = it is not change?
    Please, answer me? if you can. regards.

    Please, view Print-Screen of my problem:
    <a href="http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html">http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html</a>
    Anybody can help?

  • Regarding User Exit for MIGO

    Hi Friends:
       I've got the following urgent requirement.When we execute the transaction code for GR i.e. 'MIGO', there should a BDC triggered automatically in the background.This BDC should update the transaction code 'F.13' for automatic clearing.
       I just wanted to ask if there is any kind of user/customer exit or BADI available so that a BDC can be linked to MIGO.I want this BDC to be triggered as soon as the MIGO gets saved.The data in F.13 should be updated is 'company code, fiscal year, assignment no(concatenate ebeln & ebelp), check G/L acct, put G/l acct. no, uncheck 'Test run').This BDC should run on a runtime basis i.e. we have to pick data one by one from MIGO.
         I hope I've made my requirement clear.Is there anyone who have done this earlier & can give me a readymade guideline/example/code so that I can handle this urgent requirement.Is there any kind of confusion, please advise.I really need help on this.Please advise.Reward points will be there.If anyone want to send any material on this, please send on '[email protected]'.
         Friends, I'll really be thankful for this help.
    Thanks:
    Gaurav

    Hi Gaurav,
    Following exits are available for MIGO:
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    Following exits are available for F.13:
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not s
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI docume
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Chang
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Tex
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segmen
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    Ashven

  • Not able to print in MIGO

    Hi Gurus,
    Not able to print in MIGO transaction for the printer. Able to print all other transactions for the particular printer in SAP.
    Need your expertise to solve this issue.
    Thanks and regards
    Durai

    Are you checking (ticking) the Print check box while doing MIGO? If no, you cannot print.
    If yes, are the output types configured? Do you get the output type in the material document? If no, try adding it manually.
    If yes, will need more info to resolve your issue.
    Lakshman

  • Number range for MIGO/ MIGO Exit

    Hi Experts,
    We need to Assign the Number Range for MIGO Document based on *plant* number.
    Is there any user exit/badi exists to accomplish?
    Please advise
    Regards,
    Srinivasu Daroori
    Edited by: Srinivasu Daroori on Feb 26, 2009 5:57 AM

    Hi,
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. D
    MBCF0002  Customer function exit: Segment text in material doc. i
    MBCF0005  Material document item for goods receipt/issue slip
    MBCF0006  Customer function for WBS element
    MBCF0007  Customer function exit: Updating a reservation
    MBCF0009  Filling the storage location field
    MBCF0010  Customer exit: Create reservation BAPI_RESERVATION_CREA
    MBCF0011  Read from RESB and RKPF for print list in  MB26

Maybe you are looking for