Print from open accordian panel only

Hi all,
I'm hoping I have put this in the right section. Apologies if I haven't. I am trying to use accordian panels and what I want is to be able to print from the open panel only. I want to have a link in the panel saying "print this...." and only have it print that panel and not the closed ones. It's probably something realy simple that I am missing. Any help would be greatly appreciated.
Thanks

If you set a default CSS rule that prevents printing when the page is opened.
Using the link "print this" use the Spry Element Selector to change the CSS rule to enable printing of the section that you want, print the section and disable printing of the section.
For CSS have a look here http://www.alistapart.com/articles/goingtoprint/ or Google the subject
For Spry Element Selector see here http://labs.adobe.com/technologies/spry/articles/data_api/apis/element_selector.html or Google the subject
To print have a look here http://www.htmlgoodies.com/beyond/javascript/article.php/3471121/Print-a-Web-Page-Using-Ja vaScript.htm or Google the subject
Gramps

Similar Messages

I cannot print from firefox. I can print from open office. It seems to have something to do with when frames open because in IE, I can print a whole page, but when I try to use a print button embeded in a page or frame it does not work.

Cannot print from firefox at all.
In Internet Explorer, I was able to print by pushing the print button, but when opening a frame, like in mapquest, the embedded print button brings up an options window that has print frames options in it, but when hit OK in this box, a second error box comes up with a yellow exclamation point and nothing prints. I have a feeling that it is the same problem with both browsers, but would prefer using firefox. Can you help with this?

Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each.
    To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
    Thanks

When I download to print from Yahoo mail, I only get 1/2 a page - I have eliminated the printer as a problem

When I download from Yahoo mail, only 1/2 the page shows in preview and only 1/2 is printed. I have eliminated a printer problem. Any help appreciated.

Open System Preferences > Print & Scan > Print
Click Open Print Queue
Delete all files in the print queue.
Quit and relaunch Safari and try printing the email.
If that didn't help, empty the Safari cache.
Command + Option + E then relaunch Safari and try again.
message edited by: cs

Open Accordian Panel via anchor tag

I have about 20 accordian panels stuffed with content. Is it
possibe for a user to click a link on the same page and be carried
to the specific panel? -- having it open would be a bonus.
thanks for your time

I had a similar question. I'm trying to use named anchors on
one page in a site to to open specific panels on a different page,
but I'm not having much success. Depending on where I place the
anchor tags, I can get ALL of the panels with anchor tags to open
when the link is clicked. However, I can't seem to make a single
link open a single panel. My javascript skills are minimal -- I can
edit from examples, but I don't have the knowledge to write code
from scratch. Any help or advice is most appreciated.

Photosmart 5580 will no longer print from my wifes laptop, only from the desktop computer

Hello,
We have an HP computer with a photosmart 5580. We also have a lynksis wireless network set up for the home for all of the kids laptops. My wife and kids used to have the capability to print documents from their laptops. I am not sure if it was going through the wireless network or the bluetooth technology on the laptops. Recently we have run into the problem that they are no longer able to print from their laptops and even from the desktop we have not been able to print. I have had to reinstall the printer onto the desktop 2 times to make the printer work. But then a week or 2 later the computer stops recognizing the printer and I will have to reinstall it. The desktop is only 2 years old but it is barely used since everyone has a laptop. Also a friend of ours says that by doing a disk defrag on the computer that it messes up anything that we have connected to the computer. I strongly disagree with that statement and like I told my wife, if that were the case then the printer would have stopped working last year, but she takes this friends advice seriously and told me to stop the defrags completely.
I am thinking that it may be something in the registry that is causing this problem. Am I headed in the right direction or does anyone else have a different idea to correct this problem?
Thanks

Well, I think the problem is that the printer is getting a different IP address from the router periodically and the printer software cannot keep track of the printer.
The best way to fix this is to reserve an IP address for the printer so that it has the same IP address all the time. Do you need help doing this?
Unless I am missing something, this system is not using Bluetooth, but the Linksys 802.11 wireless system and defragging your hard drive has nothing to do with it (and is generally a waste of time, anyway).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

When printing from the ipad, it only prints small size...not a regular sheet size. Any suggestions?

When printing from the ipad, it will only print small size. I want it to print full sheet. Any suggestions?

If you are using HP, try this app:
https://itunes.apple.com/sg/app/hp-printer-control/id469284907?mt=8
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/9d3a6ecace9ccd2a24 de11e7fe565943_zps51bc1998.jpg

When I try to print from the browser, it only prints about 1/3 of the page, it doesn't shrink the contents, just truncates the print area.

Currently running FF 3.6.8, with W 7 home professional. Every time I try to print from the FF browser, it truncates the print area to about 1/3 of it's normal size. It doesn't shrink to fit the content, just the print area. I've checked all the settings and they look normal. This only happens in FF, I can go to the same url in ie and it will work just fine.
== Every time I try to print directly from the browser.

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

Programatic change of open accordian panel

Is there a way to change the open panel of an accordian
widget? If so, would you mind sharing it?

<button onclick="var panels = sampleAccordion.getPanels();
sampleAccordion.openPanel(panels[1]); return false;" >open panel
two</button>
getPanels() returns a 0 based array so don't trip up on that.
Chris

When I print from my pad it only print one page at a time, why?

Why can I only print one page at the time when using the iPad?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Faulty, noisy grey prints from LR 2.6 64-bit, Windows 7 64-bit, HP B9180

I've been using Lightroom for about a year, and recently retired my old Windows XP 32-bit system and built a brand new AMD Quad-core Windows 7 64-bit PC. The C: drive is a brand new Kingston V+ SSD 128GB, supplemented by a 1TB SATA3 WD Caviar Black D: drive. My LR Catalog resides on the SSD C: drive (carried over from the old system), though my photo storage is on a LaCie 1TB eSATA disk. I currently have 4GB of DDR3 high-quality RAM (I do plan to add more) and run a largely trouble-free HP Photosmart Pro B9180 printer via USB 2.0 cable. My catalog and photos are all nicely intact onscreen, but I have the following problem when I use the Print Module:
Prints from Lightroom 2.6 64-bit for Win 7 (a fresh install) come out of the printer as large fields of grey noise (!) They are quite difficult to describe, but they are absolutely not a simple profile problem in any way that I can imagine. That is, the entire printed photo is grey noise (actually quite a bit of chroma noise as well on close viewing) but perfectly white borders if the print is set up for borders . If the photo has any very white highlight or very dark/black shadow areas, those portions do appear in the print as white highlights or red shadows, respectively. Other than those extreme highlight and shadow areas, the print is absolutely unrecognizable, appearing as only greyish chroma noise. ????
This problem is true for all of the follwing situations:
Whether the source file is .JPG or Canon RAW
Whether I print on Glossy Advanced or Plain Paper
Whether I print in Best, Normal, or FastDraft mode (from the printer driver)
Whether I try Application Managed Color, Printer Managed Color, or no color management at all
The one exception to this problem occurs only when I select the Draft Mode Printing checkbox in the LR Print Module and go on to print in draft mode. In this case only, I can get a recognizable print (a typical draft quality print is made without any other problems).
I do not have problems printing from Open Office, Firefox, or even full photo-output prints from Canon Digital Photo Professional of the same image files (without LR adjustments, naturally), nor did I have this problem printing in LR 2 32-bit on my old XP system (It may have been version 2.5 the last print I made, however).
I have already perfomed a "repair-install" of a freshly downloaded LR 2.6 64-bit installer, yet the problem remains. I have not yet tried to completely remove LR before reinstalling. I have not yet reinstalled my HP 64-bit printer drivers, as the problem was limited to Lightroom. Happy to post images if helpful (I'm new here, I'll have to check the rules and instructions).
Have not found anyone else with this problem in my searches. Any help would be greatly appreciated, as this is extremely disruptive to my workflow and revenue stream
Camron
EDIT: Photo of comparison prints: Canon DPP on left, LR 2.6 on right (same image file)

Thanks for the suggestions. I have tried each idea in the order suggested. Unfortunately I have not yet solved the problem. In some circumstances, with certain paper profiles and no other color management in place, I get faulty prints but they have large areas of solid color in areas where there is a large amounts of color saturation in the original image. The faulty image below is printed to plain letter-sized paper ar Normal Quality. One clarification I wish to make is that my HP printer driver was not specifically a 64-bit driver, but rather 32-bit/64-bit driver compatable for Win 7.
I may try completely uninstalling LR before reinstalling, instead of a "repair-install" but I am still open to other suggestions.
Camron

Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack. Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF. (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
If we can't use the ADF for check printing, then how can we get the checks to print in the correct order. Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1. Otherwise they have to count out the exact number of checks & place them in the tray. Or reverse all of them which is not an efficient either! I hope this makes sense.

Hi @kceacct ,
I see that you would like to know how to print out the checks in order. I will do my best to help you.
The ADF can be used for copying, scanning and faxing.
From the print driver you can only select the tray that you want to print from.
Changing Print Settings in Windows 8.
You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems printing from LR 4.4 to Epson printer

Mac 10.9.5; Lightroom 4.4; I just got an Epson Printer Stylus Photo R2000; when I print from LR it will only print a 5x7 rectangle of the picture and not the whole thing; trying to print letter size or larger; set all sizes correctly. Printer prints whole page from Apple programs but not from Light Room; I spent an hr with Epson who initially said it was an apple problem; spent another hour with Apple support which got the printer printing correctly from Apple programs but it continues to have same problem from Lightroom. So Apple said it's an Adobe problem. What do I do to get LR to work correctly?

I am back and still having trouble with Lightroom. Someone suggested I downgrade to LR 4.1 (from 4.4) but that didn't help. To reiterate: I have a MacBook Pro, using 10.9.5. I got a new Epson Stylus Photo R2000 printer and LR is having trouble communicating with the printer. When I try to print a letter size (or other size) picture, a 5x7 partial tile of the picture prints off center bleeding to the top. The only way I can print a whole picture is the size it 5x7; then it prints the whole picture but it is still off center, not as it appears in LR print view. I have talked with Epson who said I had Mac conflicts; I spoke with Mac who got rid of the conflicts so it can print fine from Apple programs like Pages, or the internet. It is only LR that won't print right. Obviously I got a photo printer to print photos so I would like help resolving this. It has been very frustrating that although I could talk with both Apple and Epson support, when I tried to contact Adobe both by phone and Live chat I was told that LR is not supported except on this forum. So please, help. Thanks.

I want to print from my ipad air2

I want to print from my new ipad air 2 but have Epson printer. What to do?

Printing from an ipad is only permitted on printers that manufactures have purchased a licensing agreement from apple for. You will in turn pay a premium for these printers. Some have purchased license to incorporate this feature into software that is available free of charge to the consumer in the app store. I use such an app for my canon printer and while it works ok I generally find it easier to just email to myself and then print it out using my desktop or windows tablet.
https://developer.apple.com/airprint/

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running Mac OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of Mac OS X, select Go ▹ Go to Folder… from the Finder menu bar and enter “~/Library” (without the quotes) in the text box that opens.
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.

How can I prevent Firefox from opening the file I create when I print a page with PDF Create! 5

After I print a web page using PDF Create! 5, Firefox opens the file so i can view it. Before I print, I select print properties and disable "view resulting pdf". However, the file is always opened in Adobe Acrobat, although I believe I have Adobe Reader set as default. I do not want any file to open. This happens on my non-privileged accounts. On my privileged account, the file is not opened. I have removed Firefox profiles, re-installed Firefox, Reset Firefox in Help-Troubleshooting. PDF Create!5 print screen can only be viewed in a host program such as Firefox, Libre-office Writer, or any other program that prints. They do not open the file either.

Thanks for your help. This is the Scansoft (Nuance) program. What I do not understand is why when I tell the print driver not to open the file with a privileged account, it obeys me. I am not sure where in the registry I would look for the information. I do not want to, but perhaps I should remove the Adobe Acrobat program (temporarily?) - then what would it do? Again, when I print from other programs - browsers, wordprocessors, etc - the file is not opened after printing, just with FireFox. I guess I can live with it, I have spent too much time already.

Print from open accordian panel only

Similar Messages

Maybe you are looking for