Print Gantt Chart: blank at the beggining of the chart

Hi Experts,
I am working with cProjects 4.5, trying to explore printing Gantt functionality.
1. If I try to print a whole project, at the beggining of the graphic I have a gap of approximately 1,5 months before the project starts. How can I print the graphic view only from the project start date?
2. If I had already completed phase 1, maybe printing that phase is irrelevant for me, and I want the graphic printing to start from phase 2. Can I choose a date from when I want to print the graphic?
Thank you in advance.
Best regards,
Neil

Hi Experts,
There are some notes to be implemented about this topic for version PPM45. In PPM50 it is solved.

Similar Messages

  • Printing an extra blank page at last in the report with result!

    Dear Team,
    I have one report  ZFI_KKKKK  i.e working fine with the result.
    The problem is that this report prints an extra blank page in the end of the report.
    It should not print the extra empty page. Itu2019s a bit annoying for some users.
    If you execute and print this and you will get a page with results and a blank page with just the title.
    Any input from your side to rectify the issue?
    Thanks and Regards,
    Sarkar

    Hi,
    change the line size and check.
    vijay Gurav

  • When printing labels for each printed label a blank label comes out of the printer

    Hello Experts
    We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
    Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
    I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
    Thanks in advance and regards

    Hi,
    Please check below SAP note and let me know your feedback:
    1043235 - Label/thermal printers are not supported by SAP Business
    One
    Thanks & Regards,
    Nagarajan

  • It looks like your problem is at the beggining in the form tag, specificall

    Hello,
    I'm having an issue with a cgi form that I created (added on to a website I created using iWeb). Basically, here's the problem: I'm not sure if I have to FTP it over to mac in order for it to work, but if someone could let me know if that's the issue, I'd appreciate it. Basically, when any client hits the submit button on my site to fill out a quote request, it DOES NOT go into my inbox. Why?
    Here's the html code:
    http://yourdomain.com/cgi-bin/FormNewMail.cgi
    Below is a comment I received from someone who thought they knew where the problem was.
    "It looks like your problem is at the beginning in the form tag, specifically
    this part:
    action="http://yourdomain.com/cgi-bin/FormNewMail.cgi"
    When I type in that address, the correct page isn't loading, which probably
    means you haven't uploaded the actual "FormNewMail" script to your cgi-bin
    folder (at Webintellects).
    Anyone care to tackle this one?
    Thx,
    J

    What exactly does iWeb support as far as html forms then?
    Search this forum for "form".
    http://discussions.apple.com/thread.jspa?messageID=7650084&#7650084

  • How to put a space (not tab) in the beggining of a line on Dreamweaver?

    Hello everybody,
    I'm editing a site using photoshop and  dreamweaver, the problem is that photoshop does'nt paste formatted text so I had to appeal to Dreaweaver. The problem is that when I paste my word text (paste  especial - full formatting) all the format stuff is right, but the beggining of the some lines (which have some spaces in word) doesn't have spaces in Dreamweaver.  How can I do that? I'm asking  that because I know you can tab the line, but the tab size is too large for me, is there any way to  get it lower? And there's a way of don't put new lines  on or under the  tabbed text (Dreamweaver does that)?
    []'s
    John

    function(){return A.apply(null,[this].concat($A(arguments)))}
    In the Code view use:
    <code>"nbsp;"</code>
    exactly as it is written above.  It will put a NonBreakingSPace (NBSP) into the text.  Each "<code> </code> " that you put equals one letter space depending on which font you use.  It is the same as placing multiple spaces with the spacebar when you use it multiple times.
    Message was edited by: markerline

  • Screeching noise at the beggining of my project.

    Everytime I record a video and I play it back in my bin, and it plays back fine. However once I put it up into a project, there is a really loud screeching noise at the beggining of the video. Has anyone had this problem?

    I'm reviving this thread, because I'm still having this problem.
    I've tried turning my speakers on mute while recording, and I've tried turning my mic down all the way while playing video back.
    Any other suggestions, any help at all would be awesome.

  • How to check the balance of the accounts in a specific dates

    Hi all
    I am using GL, AP and CE. My customer wants some reports or functionality in the system to check the balances of specific accounts in specific dates.
    So the user has to enter the beginning and the ending date for example:
    Beginning date: 13-JAN-2010
    Ending date: 21-FEB-2010
    Select some range of the accounts
    And he wants back this information: account number, account description, the beggining balance (the balance of each account chosen in 13-JAN-2010), ending balance(the balance of each account chosen in 21-FEB-2010)
    Please tell me where to find this information. Is there any standard report in the system.
    I checked Trial Balances reports, but they all do not give you the possibility to choose some range of accounts and they do not give you the possibility to choose specific dates.
    Almost the same comments for Account Analysis reports: they do not show balances, but movement for accounts.
    Almost the same comments for General Ledger reports: they do not allow you to choose specific dates.
    Please tell me how can i find this, because my customer is complaining that the old system did this and he really wants this information even in the new system which is Oracle Financial.
    Thank you and best regards
    Ernest

    Hello Ernest.
    You will need to know the FLEX_VALUE_SET_ID corresponding to your accounts 1110001 and 1110004. Also check if these values belong to segment2 of the Chart of Accounts. If not, you will need to change it in the query.
    For the Beggining balance:
    SELECT cc.segment2 "Account",
    f.description "Description",
    nvl(sum(l1.accounted_dr),0) - nvl(sum(l1.accounted_cr),0) "Beg Balance"
    FROM gl_code_combinations cc,
    fnd_flex_values_vl f,
    gl_je_lines l1
    WHERE cc.code_combination_id = l1.code_combination_id
    AND cc.segment2 between '1110001' and '1110004'
    AND cc.segment2 = f.flex_value
    AND l1.effective_date <= '13-jan-10'
    AND f.flex_value_set_id = <value you will need to find>
    AND l1.set_of_books_id = <your set of books id>
    GROUP BY cc.segment2, f.description
    For the ending balance:
    SELECT cc.segment2 "Account",
    f.description "Description",
    nvl(sum(l1.accounted_dr),0) - nvl(sum(l1.accounted_cr),0) "End Balance"
    FROM gl_code_combinations cc,
    fnd_flex_values_vl f,
    gl_je_lines l1
    WHERE cc.code_combination_id = l1.code_combination_id
    AND cc.segment2 between '1110001' and '1110004'
    AND cc.segment2 = f.flex_value
    AND l1.effective_date <= '21-feb-10'
    AND f.flex_value_set_id = <value you will need to find>
    AND l1.set_of_books_id = <your set of books id>
    GROUP BY cc.segment2, f.description
    Let me know if it worked.
    Octavio

  • When printing Gantt chart, some of the bars are not appearing in it

    When printing Gantt chart, some of the bars are not appearing in it
    I have added print tag in xml of chart mode-multiple pages.
    <print mode="MultiPage" print_all_columns="true" />
    For printing, I right ckicked on chart and clicked on Print chart..
    Edited by: Sheetal on Mar 29, 2012 2:46 AM
    Edited by: Sheetal on Mar 29, 2012 2:51 AM
    Edited by: Sheetal on Mar 29, 2012 2:56 AM

    Sheetal,
    Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
    <print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
    I've changed some of these settings to no avail.
    -Seth.

  • Print Gantt chart without wasting paper

    I have few tasks but a long date range to plot- a short and wide gantt chart. Is there a way to wrap the gantt chart onto one page or set printing options so that it only plots say the top 4 inches of each page?

    KYRep,
    If all you want to show is the long tasks I think you best bet is to set the timescale to months, or years as appropriate so you will be able to see the start and finish together in the view. There is little benefit to having a fine timescale (e.g. days)
    if all it will show is a looooooong Gantt bar.
    And no, you can't "wrap" the Gantt Chart. You can however control the tasks that are printed by employing a filter. Set up a filter for just those long tasks you wan to show and then print with the filter applied.
    Hope this helps.
    John

  • Printing Gantt Charts

    Good morning,
    I have produced a complex project plan for my MD using the Tasks/Gantt Chart feature.
    Whilst the MD has been provided with the URL to the Gantt chart, his preference is to have a printed copy.
    However, after viewing the ribbon and browsing relative threads on this site, there does not appear to be a basic print function for 2010 Gantt charts?
    Is this correct? If so, is there anything I can do (code etc.) to provide a print feature?
    If coding is the only option, perhaps someone would be kind enough to share the specific code.
    Kind regards,
    David
    Senninha010

    Hi  David,
    According to your description, my understanding is that you want to print the Gantt Charts of task list in the SharePoint 2010.
    For a workaround, you can use a screen capture program (such as TechSmiths SnagIt) to take screen shots of the window in different places and then stitch them together to print out.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
    What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
    Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
    https://discussions.apple.com/thread/3890509?start=0&tstart=0
    This solved my question by mcbuffy  on Apr 20, 2012 11:29 AM 
    There's a solution if you want to see the PDF inside Safari's window :
    Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
    If you see a file with PDF in its name drag it to the trash.
    Quit and restart Safari to test with a PDF.
    If it works you can empty the trash.

  • How can I print a selection in Firefox 11 without it wasting paper and printing blank space in place of the non-selected material?

    In Firefox 10 and before, I could select a small portion of a web page and it would print the selected portion on a single page. In Firefox 11, it prints blank space for the portion above my selection before printing my selection. This blank space could span several pages, and my printer prints those several blank pages with only headers and footers.

    Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.

  • Why does a blank sheet come out of the printer first and then the sheet to be printed? HP d135 printer.

    When I try to print from a web page using Firefox, the page usually does not print in the correct format and I always get extra blank pages. Usually the first page that comes out it blank. I'm using a HP d135 All-in-one printer. This problem does not happen when I use Explorer. Does anyone have a fix for this printing problem? Thanks for any help you can provide.
    == This happened ==
    Every time Firefox opened
    == I loaded Windows 7

    @paddyv, Welcome to the Community!
    You should have the option in the program you're printing from, to change the page order. Check the settings in the program.
    If you cannot find the options, please let me know which program and operating system you're running and I will have a look in to this for you.
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP 3210 printer prints blank pages and only half the first page

    When I updated to Firefox 4.0.1 my HP 3210 printer now prints blank pages before and after the correct page and then only prints half of it. It prints with no problem as before in Internet Explorer but I cannot keep going back to WExplorer just to print.

    You have not said but it sounds like you are using a Macbook pro with retina display.
    Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
    Peter

  • Any solution to why the first page of secure document will print, but is blank?

    Title page of a secured document is printing out blank.  The page has stamps on it and is clearly visible during the print preview before print.  Second and subsequent pages print fine.
    Unsure if some setting has been unchecked that skips printing the first page or some unknown error.
    Any help would be apprecaited.  Thanks.

    Hi Shabeaut,
    According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
    I recommend to export all the existing subsites and import them to new web application.
    More references:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for