Print problem with Desktop 6.2

I just installed 6.2 on my vista pc. I use a z22 and an infared connection to syn. Everything works fine, but when I try to print one copy of the calendar in monthly format the print file sends hundreds of copies to the printer until I cancel the print. What is then printed is a blank calender with none of the scheduled appointments.
I didn't find any problem like this on the forum. Can anyone give me an insight? Thanks Terry
Post relates to: Palm Z22

Thanks Colapop for you suggestion.
I had already tried that option and it gave no good result.
Yesterday I bought KeySuite from Chapure and now everything works fine again.
I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
Cheers
LouisK100

Similar Messages

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Default printer problems with adobe 10.1.2

I was having problems printing PDFs since upgrading to 10.1.2. After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window. The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC') The second is "HP psc 2350 series" (lower case 'psc') . The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly. Now that I have solved my printing issue, I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document. The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window. I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
My computer runs in Windows 7 (64-bit). The printer is HP psc 2355xi all-in-one. Any suggestions are much appreciated

I have not been able to select a different default printer for Adobe, but I can print if I manually select the correct link everytime.
Date: Tue, 6 Mar 2012 13:16:52 -0700
From: [email protected]
To: [email protected]
Subject: default printer problems with adobe 10.1.2
    Re: default printer problems with adobe 10.1.2
    created by AMG13 in Adobe Reader - View the full discussion
I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Printing problems with hp laserjet cp1515n [found problem]

Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

Printing Problem with Epson R320 (Print CD)

Problem: I cannot print using Print CD with a new Epson Stylus Photo R320, however I can print from applications using the gimp beta driver provided in OS software, via <Print Using> dialogue box.
Power Mac G4 dual 450, running 10.4.6.
After phoning Epson, I downloaded the needed driver from Epson and went through the installation process with an Epson tech. However I cannot seem to access this driver in the print utility. The Printer Setup Utility is forcing me to choose a “gimp” driver. Some discussions on this site suggest choosing just Epson usb—the question is how with the way the dialogue boxes are configured in Printer Setup Utility. The problem seems to be I am unable to access the driver through the <Print Using> menu in the utility. If I select more printers, (after highlighting the R320) this causes the print utility to crash.
I have repaired permissions, reset the printer setup, uninstalled, reinstalled; actually I have done everything I could find to do. The problem seems so simple. I easily created my CD label; now I would just like to print it!! Any ideas from all the pros on this list. Thank you.
Mary Ann
Desktop: G4 450 dual and Powerbook G4 15 Mac OS X (10.4.6) Epson Stylus Photo R320

I have an Epson R320 and have communication problems.You start the job and after about 5 seconds you get a ! in the dock on the printer icon and on opening you see "job stopped".
I am no expert but it seems to me that the program e.g.MYOB accounting fails to pass the data to OSX.
If I de install and reinstall the epson drivers and repair permission it will work ...but then the next day on re-booting we are back to the same state of not working.
I have informed Epson and am waiting for a reply. The epson printer tests and standalone mode works. OSX problem?

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Print problem with Desktop 6.2

Similar Messages

Maybe you are looking for